Pull wires all the way through the connector face, and then use the crimper to cut and crimp wires in one step.

Protect equipment from electromagnetic interference.

These sockets have a 110 punch-down connection; use a punch-down tool to terminate.

Add ix Industrial connections to printed circuit boards (PCBs).

Unlike traditional RJ45 connectors found in data centers, these connectors stand up to rugged industrial environments since they tightly thread to devices with M12 connections, sealing out contaminants and resisting shaking loose from vibration. Use them to transfer high-speed data between sensors, switches, computers, IO modules, programmable logic controllers (PLCs), and other equipment.

Join two Ethernet cords—these adapters have an RJ45 female connection on both ends.

Create various data connector configurations by snapping these adapters into the ports of keystone wall plates.

Adapt your USB port to connect to a variety of other devices.

To send high-speed data in tough, rugged environments, these cords have an M12 connector on one end that threads onto switches, sensors, and other devices prone to vibration. The other end has a traditional RJ45 plug that connects to Ethernet equipment, such as computers, IO modules, and programmable logic controllers (PLCs).

Use these unshielded cords where signal interference is not a concern.

The shielding blocks signal interference from nearby equipment and devices.

The plugs on these cords pivot up to 90° in each direction to fit Ethernet jacks at awkward angles or in tight spots, such as behind equipment or in enclosures.

The ratchet applies the correct pressure to ensure a complete crimp every time.