McMaster-Carr logo
    Forward
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Print
    How can we improve?
    Comments
    E-mail address (if you would like a response)
    212 Products

    Threaded Rod Mounts

    Image of ProductInUse. Front orientation. Threaded Rod Mounts. Style A.
    Image of ProductInUse. Front orientation. Threaded Rod Mounts. Style B.

    Style A

    Style

    B

    Fasten these brackets to ceilings, walls, beams, and joists to hang threaded rod.
    Note: Capacity is for the mount only. Mounting surface and fastening hardware will affect the ultimate capacity.
    Style A—Style A mounts install flush against the ceiling. They are also known as nut plates. To use, screw threaded rod directly into the threaded hole.
    Style B—Style B mounts have an offset bracket that attaches to the ceiling. To use, screw threaded rod directly into the bracket.
    Zinc-Plated Iron—Zinc-plated iron mounts have good corrosion resistance.
    304 Stainless Steel—304 stainless steel mounts have excellent corrosion resistance.
    Mounting Hole
    Style
    Material
    For Thread
    Size
    Wt. Cap.,
    lb.
    Lg.
    Wd.
    Ht.
    Thk.
    Ctr.-to-Ctr.
    No.
    of
    Dia.
    Mounting Fasteners
    Included
    Threaded Rod
    Included
    Pkg.
    Qty.
    Pkg.
    Ceiling Mount
    AIron3/8"-16
    		1752 3/4"1 3/8"—1/4"1 15/16"21/4"NoNo111445T100000
    AIron1/2"-13
    		1752 3/4"1 3/8"—1/4"1 15/16"21/4"NoNo111445T20000
    AZinc-Plated Iron3/8"-16
    		1752 3/4"1 3/8"—1/4"1 15/16"21/4"NoNo111445T30000
    AZinc-Plated Iron1/2"-13
    		1752 3/4"1 3/8"—1/4"1 15/16"21/4"NoNo111445T40000
    A304 Stainless Steel3/8"-16
    		1753 1/4"1 1/2"—1/4"2 1/4"25/16"NoNo111445T1300000
    A304 Stainless Steel1/2"-13
    		1753 3/4"1 1/2"—1/4"2 1/4"25/16"NoNo111445T1100000
    BSteel
    		1/4"-20
    		1507/8"3/4"1 7/8"1/8"—11/4"NoNo1011715T7100000
    BSteel
    		3/8"-16
    		1507/8"3/4"1 7/8"1/8"—11/4"NoNo1011715T7200000
     

    Galvanized Iron and Steel Slip-On Framing and Fittings

    To provide corrosion resistance in wet environments, this framing is galvanized. Slip the fittings over rails to construct custom railings, guard rails, storage racks, and shelving. Tighten the included set screws for a secure hold.
    Rail Mounts
    Image of ProductInUse. Front orientation. Exploded view. Contains Annotated. Slip-On Framing and Fittings. Galvanized Iron and Steel Slip-On Framing and Fittings, Rail Mounts, Rectangular Adjustable Angle.
    Image of ProductInUse. Front orientation. Exploded view. Slip-On Framing and Fittings. Galvanized Iron and Steel Slip-On Framing and Fittings, Rail Mounts, L-Shape.
    Image of ProductInUse. Front orientation. Exploded view. Slip-On Framing and Fittings. Galvanized Iron and Steel Slip-On Framing and Fittings, Rail Mounts, Oval.
    Image of ProductInUse. Front orientation. Exploded view. Slip-On Framing and Fittings. Galvanized Iron and Steel Slip-On Framing and Fittings, Rail Mounts, Round.
    Image of ProductInUse. Front orientation. Exploded view. Slip-On Framing and Fittings. Galvanized Iron and Steel Slip-On Framing and Fittings, Rail Mounts, Flush.
    Image of ProductInUse. Front orientation. Slip-On Framing and Fittings. Galvanized Iron and Steel Slip-On Framing and Fittings, Rail Mounts, Offset.

    Rectangular

    Adjustable

    Angle

    L-Shape

    Oval

    Round

    Flush

    Offset

    Rail mounts attach to rails on one end and have a flange on the other end to attach to floors, walls, and ceilings.
    Galvanized Iron—Galvanized iron fittings are malleable iron.
    Flange
    Mounting
    Holes
    For Rail
    OD
    For Pipe
    Size
    Lg.
    Wd.
    Dia.
    Overall
    Ht.
    Material
    No.
    of
    Dia.
    Mounting Fasteners
    Included
    Includes
    Each
    Rectangular Adjustable Angle
    1"3/4
    		4 3/8"2"—3 3/4"Galvanized Iron———Set Screws4936T188000000
    1 3/8"1
    		4 3/8"2"—3 3/4"Galvanized Iron———Set Screws4936T6400000
    1 5/8"1 1/4
    		4 3/8"2"—4 1/8"Galvanized Iron———Set Screws4936T6500000
    1 7/8"1 1/2
    		4 3/8"2"—4 3/8"Galvanized Iron———Set Screws4936T6600000
    2 3/8"2
    		4 3/8"2"—4 5/8"Galvanized Iron———Set Screws4936T12100000
     
    L-Shape
    1 3/8"1
    		5 1/8"3"—3 1/16"Galvanized Iron47/16"NoSet Screws4936T24800000
    1 5/8"1 1/4
    		5 3/4"3 1/8"—3 9/16"Galvanized Iron47/16"NoSet Screws4936T23200000
    1 7/8"1 1/2
    		6 3/8"3 5/8"—3 9/16"Galvanized Iron47/16"NoSet Screws4936T23300000
     
    Oval
    1"3/4
    		4 9/16"2 1/2"—3 1/8"Galvanized Iron27/16"NoSet Screws4936T18700000
    1 3/8"1
    		5 1/16"3"—3 1/2"Galvanized Iron29/16"NoSet Screws4936T7100000
    1 5/8"1 1/4
    		5 1/2"3"—3 1/2"Galvanized Iron29/16"NoSet Screws4936T7200000
    1 7/8"1 1/2
    		6 1/8"3 3/8"—3 1/2"Galvanized Iron29/16"NoSet Screws4936T7300000
    2 3/8"2
    		6 1/2"4"—5"Galvanized Iron211/16"NoSet Screws4936T12300000
     
    Round
    1"3/4
    		——3 1/8"1 9/16"Galvanized Iron41/4"NoSet Screws4936T18600000
    1"3/4
    		——5 1/8"2 1/2"Galvanized Iron45/16"NoSet Screws4936T22800000
    1 3/8"1
    		——3 9/16"1 15/16"Galvanized Iron41/4"NoSet Screws4936T6700000
    1 3/8"1
    		——5 1/2"2 1/2"Galvanized Iron45/16"NoSet Screws4936T41600000
    1 5/8"1 1/4
    		——4"2"Galvanized Iron41/4"NoSet Screws4936T6800000
    1 5/8"1 1/4
    		——5 7/8"2 1/2"Galvanized Iron45/16"NoSet Screws4936T41800000
    1 7/8"1 1/2
    		——4 1/2"2 5/16"Galvanized Iron41/4"NoSet Screws4936T6900000
    1 7/8"1 1/2
    		——6 1/8"2 1/2"Galvanized Iron45/16"NoSet Screws4936T41900000
    2 3/8"2
    		——5"2 1/2"Galvanized Iron43/8"NoSet Screws4936T12200000
     
    Flush
    1 3/8"1
    		3 3/4"4 1/8"—2"Galvanized Iron37/16"NoSet Screws4936T60100000
    1 5/8"1 1/4
    		4 1/4"4 1/4"—2 1/4"Galvanized Iron37/16"NoSet Screws4936T70100000
    1 7/8"1 1/2
    		4 3/8"4 5/8"—2 1/2"Galvanized Iron37/16"NoSet Screws4936T80100000
     
    Offset
    1 3/8"1
    		3 3/4"1 3/4"—5 5/16"Galvanized Iron29/16"NoSet Screws4936T9100000
    1 5/8"1 1/4
    		4 1/4"2"—5 7/16"Galvanized Iron29/16"NoSet Screws4936T9200000
    1 7/8"1 1/2
    		4 3/4"2 1/4"—5 3/4"Galvanized Iron29/16"NoSet Screws4936T9300000
     
    Through-Hole Rail Mounts
    Image of ProductInUse. Front orientation. Slip-On Framing and Fittings. Galvanized Iron and Steel Slip-On Framing and Fittings, Through-Hole Rail Mounts.
    Through-hole fittings allow rails to run all the way through.
    Through-hole rail mounts secure long runs of railing.
    Galvanized Iron—Galvanized iron fittings are malleable iron.
    Flange
    Mounting
    Holes
    For Rail
    OD
    For Pipe
    Size
    Lg.
    Wd.
    Overall
    Ht.
    Material
    No.
    of
    Dia.
    Mounting Fasteners
    Included
    Includes
    Each
    Offset
    1"3/4
    		3"1 7/8"2 7/8"Galvanized Iron25/16"NoSet Screws4936T194000000
    1 3/8"1
    		3 7/16"1 5/8"3 1/4"Galvanized Iron25/16"NoSet Screws4936T13100000
    1 5/8"1 1/4
    		4"1 3/4"3 5/8"Galvanized Iron25/16"NoSet Screws4936T13200000
    1 7/8"1 1/2
    		4 1/4"1 7/8"4"Galvanized Iron25/16"NoSet Screws4936T13300000
     

    Floor, Wall, and Ceiling Plates

    Image of Product. Bottom orientation. Floor, Wall, and Ceiling Plates. Solid Flat Plates.

    Solid Flat Plates

    Image of Product. Bottom orientation. Floor, Wall, and Ceiling Plates. Split Flat Plates.

    Split Flat Plates

    Image of Product. Front orientation. Floor, Wall, and Ceiling Plates. Hinged Flat Plates.

    Hinged Flat Plates

    Image of Product. Bottom orientation. Floor, Wall, and Ceiling Plates. Solid Cone Plates.

    Solid Cone Plates

    Add a finishing touch to the area around protruding pipes with these corrosion-resistant plates. They’re also known as escutcheons.
    Solid—Solid plates don’t open, so they need to be installed before you attach fittings to your pipe.
    Split—Split plates twist open on one side and then snap back together once they are around the pipe.
    Hinged—Hinged plates swing open on one side, so you can fit them around pipe and then snap them closed.
    For Pipe
    Size
    For Copper
    Tube Size
    ID
    OD
    Pkg.
    Qty.
    Pkg.
    Solid Flat Plates
     
    Polished Stainless Steel
    —1/2
    		5/8"2 1/2"53040K41200000
    3/8
    		—5/8"2 1/2"53040K4130000
     
    Split Flat Plates
     
    White Polypropylene
    —1/2
    		5/8"2 1/2"53040K4150000
    —3/4
    		7/8"3 1/8"53040K4170000
    —1
    		1 1/8"3"53040K4190000
    3/8
    		—5/8"2 9/16"13040K90000
    1/2
    		—13/16"2 3/4"13040K210000
    3/4
    		—1 1/16"3"13040K220000
    1
    		—1 5/16"3 3/16"13040K230000
    1 1/4
    		—1 5/8"3 1/2"13040K240000
    1 1/2
    		—1 7/8"3 3/8"13040K250000
    2
    		—2 3/8"4 3/8"13040K260000
    3
    		—3 1/2"4 3/8"13040K270000
    4
    		—4 1/2"6 3/4"13040K290000
     
    Polished Chrome-Plated Polypropylene
    —1/2
    		5/8"2 1/2"53040K4140000
    —3/4
    		7/8"3 1/8"53040K4160000
    —1
    		1 1/8"3"53040K4180000
    3/8
    		—5/8"2 9/16"13040K80000
    1/2
    		—7/8"2 3/4"13040K110000
    3/4
    		—1 1/8"3"13040K120000
    1
    		—1 3/8"3 1/4"13040K130000
    1 1/4
    		—1 5/8"3 1/2"13040K140000
    1 1/2
    		—1 7/8"4 1/4"13040K150000
    2
    		—2 3/8"4 3/8"13040K160000
    3
    		—3 1/2"5 3/4"13040K170000
    4
    		—4 1/2"6 3/4"13040K190000
     
    Hinged Flat Plates
     
    Polished Chrome-Plated Steel
    —1/2
    		5/8"2 3/8"13040K4010000
    —3/4
    		7/8"2 7/8"13040K4020000
    —1 1/4
    		1 3/8"3 1/2"13040K4040000
    —1 1/2
    		1 5/8"3 9/16"13040K4050000
    —2
    		2 1/8"4 1/16"13040K4060000
    —2 1/2
    		2 5/8"4 15/16"13040K4070000
    —3
    		3 1/8"5 11/16"13040K40800000
    1/2
    		—1"2 3/4"14567K120000
    3/4
    		—1 3/16"2 7/8"14567K130000
    1
    		—1 1/2"3 3/8"14567K140000
    1 1/2
    		—2"3 3/4"14567K160000
    2
    		—2 1/2"4 1/2"14567K170000
    2 1/2
    		—3 3/16"5 5/16"13040K40900000
    3 1/2
    		———13040K41100000
     
    Polished Chrome-Plated Zinc Alloy
    3/8
    		—11/16"2 3/8"14567K110000
    1 1/4
    		—1 11/16"3 11/16"14567K150000
    3
    		—3 1/2"5 7/8"14567K180000
    4
    		—4 1/2"7 1/4"14567K190000
     
    Solid Cone Plates
     
    Polished Chrome-Plated Steel
    3/8
    		—5/8"2 3/8"13040K4210000
    1/2
    		—13/16"2 3/8"13040K4220000
     

    Clamp-On Framing and Fittings

    Image of System. Front orientation. Contains Annotated. Clamp-On Framing and Fittings. Clamp-On Framing and Fittings .
    Fittings come in two pieces to clasp over rails, making assembly and disassembly quicker than our other framing. Use it to form temporary partitions, modular conveyors, and workstations. To assemble, clamp fittings onto the rail and tighten the included cap screw and nut. For permanent connections and added strength, fittings have a 5/32" hole to drill in an additional screw (not included).
    Rail Mounts
    Image of ProductInUse. Rectangular Flange. Bottom orientation. Exploded view. Rectangular Flange. Clamp-On Framing and Fittings .
    Image of ProductInUse. Round Flange. Front orientation. Exploded view. Round Flange. Clamp-On Framing and Fittings .

    Rectangular

    Flange

    Round

    Flange

    Rail mounts attach to rails on one end and have a flange on the other end to attach to surfaces such as floors, walls, and ceilings.
    Flange
    Mounting
    Holes
    Black
    Painted Steel
    Chrome-Plated
    Steel
    Shape
    Dia.
    Lg.
    Wd.
    For Rail OD
    No.
    of
    Dia.
    Mounting Fasteners
    Included
    Each
    Each
    Rectangle—2 3/4"1 5/16"1.08", 28 mm45/32"No6297N37000006297N2900000
    Round3 1/2"——1.08", 28 mm35/16"No2534T8200000———0
     

    Stainless Steel Slip-On Framing and Fittings

    Made of 316 stainless steel, this framing has excellent resistance to chemicals and salt water. Slip the fittings over rails to construct custom railings, guard rails, storage racks, and shelving. Tighten the included set screws for a secure hold.
    Rail Mounts
    Image of ProductInUse. Front orientation. Exploded view. Slip-On Framing and Fittings. Stainless Steel Slip-On Framing and Fittings, Rail Mounts.
    Rail mounts attach to rails on one end and have a flange on the other end to attach to floors, walls, and ceilings.
    Flange
    Mounting
    Holes
    Flange Shape
    For Rail
    OD
    For Pipe
    Size
    Lg.
    Wd.
    Overall
    Ht.
    No.
    of
    Dia.
    Mounting Fasteners
    Included
    Each
    Rectangular Offset1"3/4
    		1 1/8"1 3/4"2 1/4"21/4"No6040T58000000
    Through-Hole Rail Mounts
    Image of ProductInUse. Front orientation. Slip-On Framing and Fittings. Stainless Steel Slip-On Framing and Fittings, Through-Hole Rail Mounts, 45° Rectangular Flush.
    Image of ProductInUse. Front orientation. Slip-On Framing and Fittings. Stainless Steel Slip-On Framing and Fittings, Through-Hole Rail Mounts, 45° Round Flush.
    Image of ProductInUse. Front orientation. Slip-On Framing and Fittings. Stainless Steel Slip-On Framing and Fittings, Through-Hole Rail Mounts, Rectangular Flush.
    Image of ProductInUse. Front orientation. Slip-On Framing and Fittings. Stainless Steel Slip-On Framing and Fittings, Through-Hole Rail Mounts, Rectangular Offset.
    Image of ProductInUse. Front orientation. Slip-On Framing and Fittings. Stainless Steel Slip-On Framing and Fittings, Through-Hole Rail Mounts, Round Flush.

    45° Rectangular

    Flush

    45° Round Flush

    Rectangular Flush

    Rectangular Offset

    Round Flush

    Through-hole rail mounts secure long runs of railing.
    Flange
    Mounting
    Holes
    Flange Shape
    For Rail
    OD
    For Pipe
    Size
    No. of Through
    Holes
    Lg.
    Wd.
    Dia.
    Overall
    Ht.
    No.
    of
    Dia.
    Mounting Fasteners
    Included
    Includes
    Each
    45° Rectangular Flush1"3/4
    		13 1/4"1 7/8"—1 15/16"41/4"NoSet Screws6040T101000000
    45° Round Flush1"3/4
    		1——2 3/4"1 7/8"31/4"NoSet Screws6040T10400000
    Rectangular Flush1"3/4
    		13"2 1/16"—2 1/16"41/4"NoSet Screws6040T10200000
    Rectangular Flush1"3/4
    		13 1/4"1 7/8"—1 3/4"41/4"NoSet Screws6040T5700000
    Rectangular Offset1"3/4
    		11 1/8"1 3/4"—2 1/4"21/4"No—6040T5900000
    Round Flush1"3/4
    		1——2 3/4"1 3/4"31/4"NoSet Screws6040T5600000

    Flush-Fit Framing and Fittings

    Flush connections between rails and fittings give structures a clean finished look. Use this framing for stair rails, work platforms, and workstations. Slide the rail over a fitting and tighten the included set screw—the fitting grips the rail from the inside.
    Rail Mounts
    Image of ProductInUse. Front orientation. Exploded view. Flush-Fit Framing and Fittings. Rail Mounts, Rectangle.
    Image of ProductInUse. Front orientation. Exploded view. Flush-Fit Framing and Fittings. Rail Mounts, Offset-Mount Rectangle.
    Image of ProductInUse. Front orientation. Exploded view. Flush-Fit Framing and Fittings. Rail Mounts, Round.

    Rectangle

    Offset-Mount

    Rectangle

    Round

    Rail mounts attach to rails on one end and have a flange on the other end to attach to floors, walls, and ceilings. Rails slip into rail mounts and tighten with the included set screw.
    Flange
    Mounting
    Holes
    Flange Shape
    Flush-Fit Framing
    Component Type
    For Rail
    OD, mm
    Lg.
    Wd.
    Dia.
    Overall
    Ht.
    Material
    No.
    of
    Dia.
    Mounting Fasteners
    Included
    Includes
    Each
    RectangleFlange403 15/16"2 3/16"—3 5/16"Aluminum
    		25/16"NoSet Screws9577T42000000
    Offset-Mount RectangleFlange407 1/4"2 3/16"—2 1/4"Aluminum
    		25/16"NoSet Screws9577T4400000
    RoundFlange40——3 15/16"3 5/16"Aluminum
    		35/16"NoSet Screws9577T4100000

    Fire Sprinkler Head Cover Plates

    Image of ProductInUse. Front orientation. Contains Annotated. Fire Sprinkler Head Cover Plates.
    Block the gap between a sprinkler head and the wall or ceiling. Also known as escutcheons, these plates make sure rising heat sets off your sprinklers instead of escaping through the gap.
    Split—Split plates snap together over a sprinkler head that’s already installed.
    Solid—Solid plates must be installed before a sprinkler head.
    Adjustable—Adjustable plates let you customize the depth to conceal pipes that stick out from the wall or ceiling.
    Recessed Mount—Recessed plates sit flush against a surface for a clean look. They have a flat outer ring and an inner ring that extends into the wall or ceiling.
    Each
    Dp.
    Material
    For Sprinkler
    Head Style
    ID
    OD
    Certification
    1-9
    10-Up
    Split
    Image of Product. Front orientation. Fire Sprinkler Head Cover Plates. Split.
     
    For 1/2 NPT Pipe Size
    1/4"Chrome-Plated SteelDown3/4"3"—6425T30000000000
    5/8"PlasticDown3/4"3"—6425T100000000
     
    For 3/4 NPT Pipe Size
    1/4"Chrome-Plated SteelDown1"3"—6425T400000000
     
    Split—Adjustable
    Image of Product. Front orientation. Fire Sprinkler Head Cover Plates. Split—Adjustable.
     
    For 1/2 NPT Pipe Size
    1/4" to 1 5/8"Chrome-Plated SteelDown3/4"3 3/4"—6425T500000000
    3/4" to 1 7/8"Chrome-Plated SteelDown3/4"3 3/4"—6425T600000000
    2" to 3"Chrome-Plated SteelDown3/4"3 1/2"—6425T700000000
    2" to 3"Painted SteelDown3/4"3 1/2"—6425T1200000000
    3" to 4"Chrome-Plated SteelDown3/4"4 1/2"—6425T80000000000
    3" to 4"Painted SteelDown3/4"4 1/2"—6425T130000000000
     
    For 3/4 NPT Pipe Size
    2" to 3"AluminumDown1"3 1/2"—9300N110000000000
     
    Split—Recessed
    Image of Product. Top orientation. Fire Sprinkler Head Cover Plates. Split—Recessed.
     
    For 1/2 NPT Pipe Size
    3/4"Chrome-Plated SteelDown3/4"2 7/8"—6425T2100000000
    3/4"Painted SteelDown3/4"2 7/8"—6425T2200000000
     
    For 3/4 NPT Pipe Size
    3/4"Chrome-Plated SteelDown1"2 7/8"—6425T2300000000
     
    Solid
    Image of Product. Top orientation. Fire Sprinkler Head Cover Plates. Solid.
     
    For 1/2 NPT Pipe Size
    1/4"Chrome-Plated SteelDown3/4"3"—9300N1200000000
     
    For 3/4 NPT Pipe Size
    1/4"Chrome-Plated SteelDown1"3"—9300N1300000000
     
    Solid—Adjustable
    Image of Product. Front orientation. Fire Sprinkler Head Cover Plates. Solid—Adjustable.
     
    For 1/2 NPT Pipe Size
    2" to 3"Chrome-Plated SteelDown3/4"3 1/2"—6410T400000000
    2" to 3"Painted SteelDown3/4"3 1/2"—6425T2400000000
    3" to 5"Chrome-Plated SteelDown3/4"4 1/2"—6425T110000000000
    3" to 5"Painted SteelDown3/4"4 1/2"—6425T140000000000
     
    For 3/4 NPT Pipe Size
    2" to 3"Chrome-Plated SteelDown1"3 1/2"—6425T2500000000
    2" to 3"Painted SteelDown1"3 1/2"—6425T2600000000
     
    Solid—Recessed
    Image of Product. Front orientation. Fire Sprinkler Head Cover Plates. Solid—Recessed.
     
    For 1/2 NPT Pipe Size
    3/4"Chrome-Plated SteelDown3/4"2 7/8"—6425T2700000000
    3/4"Chrome-Plated SteelDown3/4"2 7/8"C-UL Listed, UL Listed
    		63945T9100000000
    3/4"Painted SteelDown3/4"2 7/8"—6425T2800000000
    3/4"Painted SteelDown3/4"2 7/8"C-UL Listed, UL Listed
    		6425T12100000000
     
    For 3/4 NPT Pipe Size
    3/4"Chrome-Plated SteelDown1"2 7/8"—6425T2900000000
    3/4"Painted SteelDown1"2 7/8"—6425T3100000000
     

    Heavy Duty Clamp-On Framing and Fittings

    Build workstations, conveyors, and shelving for heavy loads. These clamp-on framing rails and fittings are the thickest and sturdiest in our offering. The fittings slide over the rails in one piece. Tighten their bolts to clamp them in place—no machining or welding required.
    Adjustable-Angle Rail Mounts for Round Rails
    Image of ProductInUse. Front orientation. Exploded view. Contains Annotated. Heavy Duty Clamp-On Framing and Fittings, Adjustable Angle.
    Adjustable-angle fittings can be positioned at any angle. Tighten the hex head screw to secure.
    Rail mounts attach to rails on one end and have a flange on the other end to attach to panels, floors, walls, and ceilings.
    Aluminum—Aluminum fittings resist corrosion in wet environments.
    Plastic—Plastic fittings are nonconductive and lightweight. They also have good chemical resistance.
    Flange
    Mounting
    Holes
    For Rail
    OD
    Material
    Lg.
    Wd.
    Overall
    Ht.
    No.
    of
    Dia.
    Mounting Fasteners
    Included
    Each
    1/2"Aluminum2"1 1/2"2 1/2"23/16"No9578T35000000
    3/4"Aluminum2"1 1/2"2 1/2"23/16"No9578T3600000
    1"Aluminum3"3"4 1/4"41/4"No9578T7600000
    1 1/4"Aluminum3"3"4 1/4"41/4"No9578T7700000
    1 1/2"Aluminum4"4"5 3/4"45/16"No9578T78000000
    2"Aluminum5"5"6 5/8"45/16"No9578T79000000
    12 mmAluminum2"1 3/8"2 7/8"21/4"No6296N6600000
    16 mmAluminum2"1 3/8"2 7/8"21/4"No6296N6700000
    18 mmAluminum2"1 3/8"2 7/8"21/4"No6296N6800000
    18 mmPlastic2"3/4"2 1/2"23/16"No6296N1620000
    30 mmAluminum2 3/8"2 3/8"4 1/8"41/4"No6296N6400000
    30 mmPlastic1 5/8"1 5/8"4"21/4"No6296N1600000
    30 mmPlastic3"3"4"41/4"No6296N16300000
    40 mmAluminum4 1/8"4 1/8"6 5/8"43/8"No6296N65000000
     

    Aluminum Slip-On Framing and Fittings

    Half the weight of steel, this aluminum framing resists corrosion in wet environments. Slip the fittings over rails to construct custom railings, guard rails, storage racks, and shelving. Tighten the included set screws for a secure hold.
    Rail Mounts
    Image of ProductInUse. Front orientation. Exploded view. Slip-On Framing and Fittings. Aluminum Slip-On Framing and Fittings, Rail Mounts, L-Shape.
    Image of ProductInUse. Front orientation. Slip-On Framing and Fittings. Aluminum Slip-On Framing and Fittings, Rail Mounts, Oval.
    Image of ProductInUse. Front orientation. Contains Annotated. Slip-On Framing and Fittings. Aluminum Slip-On Framing and Fittings, Rail Mounts, Oval Adjustable Angle.
    Image of ProductInUse. Front orientation. Exploded view. Slip-On Framing and Fittings. Aluminum Slip-On Framing and Fittings, Rail Mounts, Round.
    Image of ProductInUse. Front orientation. Exploded view. Contains Annotated. Slip-On Framing and Fittings. Aluminum Slip-On Framing and Fittings, Rail Mounts, Round Adjustable Angle.
    Image of ProductInUse. Front orientation. Exploded view. Slip-On Framing and Fittings. Aluminum Slip-On Framing and Fittings, Rail Mounts, Triangle.
    Image of ProductInUse. Front orientation. Exploded view. Slip-On Framing and Fittings. Aluminum Slip-On Framing and Fittings, Rail Mounts, Rectangular.

    L-Shape

    Oval

    Oval Adjustable

    Angle

    Round

    Round

    Adjustable

    Angle

    Triangle

    Rectangular

    Rail mounts attach to rails on one end and have a flange on the other end to attach to floors, walls, and ceilings.
    Adjustable Angle—Adjustable-angle fittings can be positioned at any angle. Tighten the set screw to secure.
    Anodized Aluminum—Anodized aluminum resists corrosion and wear better than uncoated aluminum and has a finished appearance.
    Powder-Coated Aluminum—Black powder-coated aluminum blends in with backgrounds and hides dirt and grime.
    Flange
    Mounting
    Holes
    For Rail
    OD
    For Pipe
    Size
    Lg.
    Wd.
    Dia.
    Overall
    Ht.
    No.
    of
    Dia.
    Mounting Fasteners
    Included
    Includes
    Each
    Oval Adjustable Angle
     
    Aluminum
    1 5/8"1 1/4
    		6"2 5/8"—5 3/8"——NoSet Screws4698T307000000
    1 7/8"1 1/2
    		6"2 5/8"—5 3/8"——NoSet Screws4698T30600000
     
    Round Adjustable Angle
     
    Aluminum
    1"3/4
    		——2 7/8"3 1/8"35/16"NoSet Screws4698T7700000
    1 3/8"1
    		——2 7/8"3 1/8"35/16"NoSet Screws4698T7800000
    1 5/8"1 1/4
    		——3 3/8"3 3/4"37/16"NoSet Screws4698T7900000
    1 7/8"1 1/2
    		——3 3/8"4 1/8"37/16"NoSet Screws4698T8100000
     
    Anodized Aluminum
    1 5/8"1 1/4
    		——3 3/8"3 13/16"37/16"NoSet Screws4698T31700000
    1 7/8"1 1/2
    		——3 3/8"4 1/8"37/16"NoSet Screws4698T31800000
     
    Black Powder-Coated Aluminum
    1 5/8"1 1/4
    		——3 3/8"3 13/16"37/16"NoSet Screws4698T35500000
    1 7/8"1 1/2
    		——3 3/8"4 1/8"37/16"NoSet Screws4698T35600000
     
    L-Shape
     
    Aluminum
    1 5/8"1 1/4
    		5 3/4"3 1/8"—3 1/8"47/16"NoSet Screws4698T15700000
    1 7/8"1 1/2
    		6 3/8"3 5/8"—3 1/8"47/16"NoSet Screws4698T15800000
     
    Oval
     
    Aluminum
    1 3/8"1
    		5 1/8"3"—3 5/8"29/16"NoSet Screws4698T13300000
    1 5/8"1 1/4
    		5 3/4"2 1/2"—2 1/4"——NoSet Screws4698T15500000
    1 7/8"1 1/2
    		6"2 3/4"—3"——NoSet Screws4698T15600000
     
    Anodized Aluminum
    1 5/8"1 1/4
    		5 3/4"2 1/2"—2 3/16"——NoSet Screws4698T32800000
    1 7/8"1 1/2
    		6"2 3/4"—3"——NoSet Screws4698T32900000
     
    Black Powder-Coated Aluminum
    1 5/8"1 1/4
    		5 3/4"2 1/2"—2 13/16"——NoSet Screws4698T36400000
    1 7/8"1 1/2
    		6"2 3/4"—3"——NoSet Screws4698T36500000
     
    Round
     
    Aluminum
    1"3/4
    		——2 1/2"1 3/4"17/16"NoSet Screws4698T5200000
    1"3/4
    		——2 1/2"1 3/4"33/16"NoSet Screws4698T2500000
    1 3/8"1
    		——3"2 1/8"——NoSet Screws4698T5300000
    1 3/8"1
    		——3"2 1/8"31/4"NoSet Screws4698T2600000
    1 5/8"1 1/4
    		——3 1/2"2 1/2"——NoSet Screws4698T5400000
    1 5/8"1 1/4
    		——4 1/2"2 1/8"47/16"NoSet Screws4698T14600000
    1 7/8"1 1/2
    		——3 3/4"2 5/8"——NoSet Screws4698T5500000
    1 7/8"1 1/2
    		——4 1/2"2 3/8"47/16"NoSet Screws4698T14700000
     
    Anodized Aluminum
    1 5/8"1 1/4
    		——3 1/2"2 7/16"——NoSet Screws4698T33500000
    1 5/8"1 1/4
    		——4 1/2"2 1/8"47/16"NoSet Screws4698T32600000
    1 7/8"1 1/2
    		——3 3/4"2 9/16"——NoSet Screws4698T33600000
    1 7/8"1 1/2
    		——4 1/2"2 5/16"47/16"NoSet Screws4698T32700000
     
    Black Powder-Coated Aluminum
    1 5/8"1 1/4
    		——3 1/2"2 7/16"——NoSet Screws4698T37100000
    1 5/8"1 1/4
    		——4 1/2"2 1/8"47/16"NoSet Screws4698T36300000
    1 7/8"1 1/2
    		——3 3/4"2 9/16"——NoSet Screws4698T37200000
     
    Triangle
     
    Aluminum
    1"3/4
    		3 1/4"3 1/4"—1 7/8"35/16"NoSet Screws4698T21300000
    1 3/8"1
    		3 7/8"3 3/4"—2 1/8"35/16"NoSet Screws4698T600000
    1 5/8"1 1/4
    		3 7/8"4 1/4"—2 1/2"37/16"NoSet Screws4698T700000
    1 7/8"1 1/2
    		4 1/2"4 1/2"—2 3/4"37/16"NoSet Screws4698T800000
     
    Anodized Aluminum
    1 5/8"1 1/4
    		3 7/8"4 1/4"—2 1/2"37/16"NoSet Screws4698T33100000
    1 7/8"1 1/2
    		4 1/2"4 7/16"—2 3/4"37/16"NoSet Screws4698T33200000
     
    Black Powder-Coated Aluminum
    1 5/8"1 1/4
    		3 7/8"4 1/4"—2 1/2"37/16"NoSet Screws4698T36600000
    1 7/8"1 1/2
    		4 1/2"4 7/16"—2 3/4"37/16"NoSet Screws4698T36700000
     
    Rectangular
     
    Aluminum
    1 3/8"1
    		3 7/8"2"—4 1/8"29/16"NoSet Screws4698T7200000
    1 5/8"1 1/4
    		4 3/8"2"—5 1/2"29/16"NoSet Screws4698T9500000
    1 7/8"1 1/2
    		4"4"—4"41/2"NoSet Screws4698T10500000
     
    Through-Hole Rail Mounts
    Image of ProductInUse. Front orientation. Slip-On Framing and Fittings. Aluminum Slip-On Framing and Fittings, Through-Hole Rail Mounts, 55° Flush.
    Image of ProductInUse. Front orientation. Slip-On Framing and Fittings. Aluminum Slip-On Framing and Fittings, Through-Hole Rail Mounts, Flush.

    55° Flush

    Flush

    Image of ProductInUse. Front orientation. Slip-On Framing and Fittings. Aluminum Slip-On Framing and Fittings, Through-Hole Rail Mounts, Offset.
    Image of ProductInUse. Front orientation. Contains Annotated. Slip-On Framing and Fittings. Aluminum Slip-On Framing and Fittings, Through-Hole Rail Mounts, Adjustable Angle Offset.

    Offset

    Adjustable Angle

    Offset

    Through-hole fittings allow rails to run all the way through.
    Through-hole rail mounts secure long runs of railing.
    Adjustable Angle—Adjustable-angle fittings can be positioned at any angle. Tighten the set screw to secure.
    Anodized Aluminum—Anodized aluminum resists corrosion and wear better than uncoated aluminum and has a finished appearance.
    Powder-Coated Aluminum—Black powder-coated aluminum blends in with backgrounds and hides dirt and grime.
    UL 2703—Fittings that meet UL 2703 are approved for use in solar rack mounting systems.
    Flange
    Mounting
    Holes
    For Rail
    OD
    For Pipe
    Size
    No. of Through
    Holes
    Lg.
    Wd.
    Overall
    Ht.
    No.
    of
    Dia.
    Mounting Fasteners
    Included
    Includes
    Specs.
    Met
    Each
    Flush
     
    Aluminum
    1"3/4
    		13 1/2"1 7/8"1 3/4"25/16"NoSet ScrewsUL 27034698T1000000
    1 3/8"1
    		13 1/2"2 3/8"1 7/8"45/16"NoSet ScrewsUL 27034698T200000
    1 5/8"1 1/4
    		14 1/8"3"2 1/8"47/16"NoSet ScrewsUL 27034698T300000
    1 7/8"1 1/2
    		14 3/8"3 1/8"2 1/2"47/16"NoSet ScrewsUL 27034698T400000
    1 7/8"1 1/2
    		15"5"3"47/16"NoSet Screws—4698T30300000
    1 7/8"1 1/2
    		16"4"3 1/2"47/16"NoSet Screws—4698T30400000
    2 3/8"2
    		15"3 3/4"2 7/8"47/16"NoSet ScrewsUL 27034698T18500000
    2 3/8"2
    		18"5"3 1/2"49/16"NoSet Screws—4698T30500000
     
    Anodized Aluminum
    1 5/8"1 1/4
    		14 1/16"2 15/16"2 1/8"47/16"NoSet ScrewsUL 27034698T33300000
    1 7/8"1 1/2
    		14 5/16"3 1/8"2 1/2"47/16"NoSet ScrewsUL 27034698T33400000
     
    Black Powder-Coated Aluminum
    1 5/8"1 1/4
    		14 1/16"2 15/16"2 1/8"47/16"NoSet ScrewsUL 27034698T36800000
    1 7/8"1 1/2
    		14 5/16"3 1/8"2 1/2"47/16"NoSet ScrewsUL 27034698T36900000
     
    55° Flush
     
    Aluminum
    1"3/4
    		13 1/2"1 7/8"2"45/16"NoSet Screws—4698T39700000
    1 3/8"1
    		13 1/2"2 3/8"2 3/8"45/16"NoSet Screws—4698T39800000
    1 5/8"1 1/4
    		14 1/16"2 15/16"2 7/8"45/16"NoSet Screws—4698T39900000
     
    Offset
     
    Aluminum
    1 5/8"1 1/4
    		14"2"3 3/4"23/8"NoSet Screws—4698T39500000
    1 5/8"1 1/4
    		15 1/2"4"2 13/16"47/16"NoSet Screws—4698T16500000
    1 7/8"1 1/2
    		14 1/4"2"3 15/16"23/8"NoSet Screws—4698T39600000
    1 7/8"1 1/2
    		15 1/2"4 1/2"2 3/4"47/16"NoSet Screws—4698T16600000
    2 3/8"2
    		16"5"3 3/8"47/16"NoSet Screws—4698T22500000
     
    Anodized Aluminum
    1 5/8"1 1/4
    		15 1/2"4"2 7/8"47/16"NoSet Screws—4698T33700000
    1 7/8"1 1/2
    		15 1/2"4 1/2"2 7/8"47/16"NoSet Screws—4698T33800000
     
    Black Powder-Coated Aluminum
    1 5/8"1 1/4
    		15 1/2"4"2 7/8"47/16"NoSet Screws—4698T37300000
    1 7/8"1 1/2
    		15 1/2"4 1/2"2 7/8"47/16"NoSet Screws—4698T37400000
     
    Adjustable Angle Offset
     
    Aluminum
    1 5/8"1 1/4
    		14 1/4"2"4 5/16"27/16"NoSet Screws—4698T31100000
    1 7/8"1 1/2
    		14 1/4"2"4 15/16"27/16"NoSet Screws—4698T31200000
     

    Carbon Fiber Slip-On Framing and Fittings

    Stronger than plastic and aluminum, this is the lightest weight framing we offer. It has good resistance to chemicals and salt water. Slip the fittings over rails to construct custom railings, guard rails, storage racks, and shelving. Drill rails and connect fittings with the included hardware.
    Rail Mounts
    Image of ProductInUse. Front orientation. Exploded view. Slip-On Framing and Fittings. Carbon Fiber Slip-On Framing and Fittings, Rail Mounts.
    Rail mount attaches to a rail on one end and has a flange on the other end to attach to floors, walls, and ceilings.
    Flange
    Mounting
    Holes
    For Rail
    ID
    Dia.
    Thk.
    Bolt Circle
    Dia.
    Material
    No.
    of
    Dia.
    Mounting Fasteners
    Included
    Includes
    Each
    1 1/2"3 3/4"3/8"2 3/4"Black Anodized Aluminum47/32"NoConnecting Hardware1935N82000000
    back to top