About Measuring Hose and Tube Clamps
What's the best way to determine the clamp size you'll need? Simply measure the outside diameter of your hose with the fitting installed. Some clamps accommodate a range of sizes, so be sure the size you need falls in the middle of that range.
More
Low-Profile Band Clamps for Firm Hose
Easier to install than our Extra-Strength Low-Profile Band Clamps, these clamps seal with a quick hammer blow to the buckle. They are also known as center-punch clamps.
Unlike worm-drive clamps and bolt clamps, these have a low profile with no protruding parts to get in your way during installation. The banding is double wrapped for extra strength. Use them to secure firm plastic and rubber hose, coaxial cable, and rope. Clamps require an installation tool (sold separately).
Galvanized steel clamps offer fair corrosion resistance.
201 and 300 series stainless steel clamps have very good corrosion resistance.
Note: When choosing a clamp, measure the outside diameter of your hose with the fitting installed.
For technical drawings and 3-D models, click on a part number.
Clamp ID Range | Band | Temperature Range, °F | ||||||
|---|---|---|---|---|---|---|---|---|
| Inch | mm | Wd. | Thick. | Min. | Max. | Reusable | Each | |
Galvanized Steel with 201 Stainless Steel Buckle | ||||||||
| 5/8" to 13/16" | 15.9 to 20 | 3/8" | 0.025" | -100° | 300° | No | 0000000 | 00000 |
| 5/8" to 1 3/8" | 15.9 to 35 | 3/8" | 0.025" | -100° | 300° | No | 0000000 | 000 |
| 3/4" to 1" | 19.1 to 25 | 5/8" | 0.025" | -100° | 300° | No | 0000000 | 000 |
| 3/4" to 1 1/4" | 19.1 to 32 | 5/8" | 0.025" | -100° | 300° | No | 0000000 | 000 |
| 3/4" to 1 1/2" | 19.1 to 38 | 5/8" | 0.025" | -100° | 300° | No | 0000000 | 000 |
| 3/4" to 1 3/4" | 19.1 to 44 | 5/8" | 0.025" | -100° | 300° | No | 0000000 | 000 |
| 3/4" to 2" | 19.1 to 51 | 5/8" | 0.025" | -100° | 300° | No | 0000000 | 000 |
| 3/4" to 2 1/4" | 19.1 to 57 | 5/8" | 0.025" | -100° | 300° | No | 0000000 | 000 |
| 3/4" to 2 1/2" | 19.1 to 63 | 5/8" | 0.025" | -100° | 300° | No | 0000000 | 0000 |
| 3/4" to 2 3/4" | 19.1 to 70 | 5/8" | 0.025" | -100° | 300° | No | 0000000 | 0000 |
| 3/4" to 3" | 19.1 to 76 | 5/8" | 0.025" | -100° | 300° | No | 0000000 | 0000 |
| 3/4" to 3 1/2" | 19.1 to 89 | 5/8" | 0.025" | -100° | 300° | No | 0000000 | 0000 |
| 3/4" to 4" | 19.1 to 101 | 5/8" | 0.025" | -100° | 300° | No | 0000000 | 0000 |
| 3/4" to 4 1/2" | 19.1 to 114 | 5/8" | 0.025" | -100° | 300° | No | 0000000 | 0000 |
| 3/4" to 5" | 19.1 to 127 | 5/8" | 0.025" | -100° | 300° | No | 0000000 | 0000 |
| 3/4" to 6" | 19.1 to 152 | 5/8" | 0.025" | -100° | 300° | No | 0000000 | 0000 |
| 3/4" to 6 1/2" | 19.1 to 165 | 5/8" | 0.025" | -100° | 300° | No | 0000000 | 0000 |
| 3/4" to 7" | 19.1 to 178 | 5/8" | 0.025" | -100° | 300° | No | 0000000 | 0000 |
| 3/4" to 8" | 19.1 to 203 | 5/8" | 0.025" | -100° | 300° | No | 0000000 | 0000 |
201 Stainless Steel with 201 Stainless Steel Buckle | ||||||||
| 5/8" to 13/16" | 15.9 to 20 | 3/8" | 0.025" | -100° | 500° | No | 0000000 | 0000 |
| 5/8" to 1 3/8" | 15.9 to 35 | 3/8" | 0.025" | -100° | 500° | No | 0000000 | 0000 |
| 3/4" to 1" | 19.1 to 25 | 5/8" | 0.025" | -100° | 500° | No | 0000000 | 0000 |
| 3/4" to 1 1/4" | 19.1 to 32 | 5/8" | 0.025" | -100° | 500° | No | 0000000 | 0000 |
| 3/4" to 1 1/2" | 19.1 to 38 | 5/8" | 0.025" | -100° | 500° | No | 0000000 | 0000 |
| 3/4" to 1 3/4" | 19.1 to 44 | 5/8" | 0.025" | -100° | 500° | No | 0000000 | 0000 |
| 3/4" to 2" | 19.1 to 51 | 5/8" | 0.025" | -100° | 500° | No | 0000000 | 0000 |
| 3/4" to 2 1/4" | 19.1 to 57 | 5/8" | 0.025" | -100° | 500° | No | 0000000 | 0000 |
| 3/4" to 2 1/2" | 19.1 to 63 | 5/8" | 0.025" | -100° | 500° | No | 0000000 | 0000 |
| 3/4" to 2 3/4" | 19.1 to 70 | 5/8" | 0.025" | -100° | 500° | No | 0000000 | 0000 |
| 3/4" to 3" | 19.1 to 76 | 5/8" | 0.025" | -100° | 500° | No | 0000000 | 0000 |
| 3/4" to 3 1/2" | 19.1 to 89 | 5/8" | 0.025" | -100° | 500° | No | 0000000 | 0000 |
| 3/4" to 4" | 19.1 to 101 | 5/8" | 0.025" | -100° | 500° | No | 0000000 | 0000 |
| 3/4" to 4 1/2" | 19.1 to 114 | 5/8" | 0.025" | -100° | 500° | No | 0000000 | 0000 |
| 3/4" to 5" | 19.1 to 127 | 5/8" | 0.025" | -100° | 500° | No | 0000000 | 0000 |
| 3/4" to 6" | 19.1 to 152 | 5/8" | 0.025" | -100° | 500° | No | 0000000 | 0000 |
| 3/4" to 6 1/2" | 19.1 to 165 | 5/8" | 0.025" | -100° | 500° | No | 0000000 | 0000 |
| 3/4" to 7" | 19.1 to 178 | 5/8" | 0.025" | -100° | 500° | No | 0000000 | 0000 |
| 3/4" to 8" | 19.1 to 203 | 5/8" | 0.025" | -100° | 500° | No | 0000000 | 0000 |
300 Series Stainless Steel with 302 Stainless Steel Buckle | ||||||||
| 5/8" to 13/16" | 15.9 to 20 | 3/8" | 0.02" | Not Rated | 800° | No | 0000000 | 0000 |
| 5/8" to 1 3/8" | 15.9 to 35 | 3/8" | 0.02" | Not Rated | 800° | No | 0000000 | 0000 |
| 3/4" to 1" | 19.1 to 25 | 5/8" | 0.022" | Not Rated | 800° | No | 0000000 | 0000 |
| 3/4" to 1 1/4" | 19.1 to 32 | 5/8" | 0.022" | Not Rated | 800° | No | 0000000 | 0000 |
| 3/4" to 1 1/2" | 19.1 to 38 | 5/8" | 0.022" | Not Rated | 800° | No | 0000000 | 0000 |
| 3/4" to 1 3/4" | 19.1 to 44 | 5/8" | 0.022" | Not Rated | 800° | No | 0000000 | 0000 |
| 3/4" to 2" | 19.1 to 51 | 5/8" | 0.022" | Not Rated | 800° | No | 0000000 | 0000 |
| 3/4" to 2 1/4" | 19.1 to 57 | 5/8" | 0.022" | Not Rated | 800° | No | 0000000 | 0000 |
| 3/4" to 2 1/2" | 19.1 to 63 | 5/8" | 0.022" | Not Rated | 800° | No | 0000000 | 0000 |
| 3/4" to 2 3/4" | 19.1 to 70 | 5/8" | 0.022" | Not Rated | 800° | No | 0000000 | 0000 |
| 3/4" to 3" | 19.1 to 76 | 5/8" | 0.022" | Not Rated | 800° | No | 0000000 | 0000 |
| 3/4" to 3 1/2" | 19.1 to 89 | 5/8" | 0.022" | Not Rated | 800° | No | 0000000 | 0000 |
| 3/4" to 4" | 19.1 to 101 | 5/8" | 0.022" | Not Rated | 800° | No | 0000000 | 0000 |
| 3/4" to 4 1/2" | 19.1 to 114 | 5/8" | 0.022" | Not Rated | 800° | No | 0000000 | 0000 |
| 3/4" to 5" | 19.1 to 127 | 5/8" | 0.022" | Not Rated | 800° | No | 0000000 | 0000 |
| 3/4" to 6" | 19.1 to 152 | 5/8" | 0.022" | Not Rated | 800° | No | 0000000 | 0000 |
| 3/4" to 7" | 19.1 to 178 | 5/8" | 0.022" | Not Rated | 800° | No | 0000000 | 0000 |
| 3/4" to 8" | 19.1 to 203 | 5/8" | 0.022" | Not Rated | 800° | No | 0000000 | 0000 |
Heavy Duty Installation Tools for Low-Profile Band Clamps for Firm Hose
With the most leverage of any of our installation tools, this tool has a ball handle that makes it easier to ratchet.
Use to tighten Low-Profile Band Clamps for Firm Hose, then break off the excess banding.
Medium Duty Installation Tools for Low-Profile Band Clamps for Firm Hose
This tool is longer than the light duty tool for increased leverage.
Use to tighten Low-Profile Band Clamps for Firm Hose, then break off the excess banding.
| For Band Wd. | Lg. | Ht. | Wd. | Material | Handle Type | Each | |
| 3/8", 5/8" | 11" | 1 1/2" | 1 1/2" | Steel | Ratchet | 0000000 | 0000000 |
Light Duty Installation Tools for Low-Profile Band Clamps for Firm Hose
Use to tighten Low-Profile Band Clamps for Firm Hose, then break off the excess banding. Tool has a punch lever on each end.
| For Band Wd. | Lg. | Ht. | Wd. | Material | Handle Type | Each | |
| 3/8", 5/8" | 10" | 1" | 2" | Steel | Ratchet | 0000000 | 000000 |
Wing-Handle Installation Tools for Build-Your-Own
Low-Profile Band Clamps for Firm Hose
Tool comes with a built-in cutter and a tension wing handle, as well as a tension nut that can be used instead of the handle in confined spaces. Use with banding and buckles to build your own low-profile band clamps.
You can also use this tool to install our Extra-Strength Low-Profile Band Clamps for Firm Hose—just fit a cutting adapter (sold separately) over the tool. The press-cut adapter cuts the banding when you press down the handle. The screw-cut adapter cuts the banding when you turn a screw with the included ratchet handle.
Ratchet-Handle Installation Tools for Build-Your-Own
Low-Profile Band Clamps for Firm Hose
Use with banding and buckles to build your own low-profile band clamps. Tool has a ratchet-action handle to tighten the band.
Handle | ||||||
|---|---|---|---|---|---|---|
| For Band Wd. | Lg. | Material | Finish | Type | Each | |
| 1/4", 3/8" | 8" | Zinc-Plated Steel | Vinyl Coated | Ratchet | 000000 | 0000000 |
Vise-Mount Installation Tools for Build-Your-Own
Low-Profile Band Clamps for Firm Hose
Use with banding and buckles to build your own low-profile band clamps.
| For Band Wd. | Lg. | Pull Strength, psi | Material | Each | |
| 3/4", 1", 1 1/4" | 16 1/2" | 6,000 | Zinc-Plated Steel | 0000000 | 0000000 |
Wing-Handle Installation Tools for Extra-Strength
Low-Profile Band Clamps for Firm Hose
Use to install Extra-Strength Low-Profile Band Clamps for Firm Hose.
Hose and Tube Clamp Cutters
Slice through pinch clamps to remove them from hose. Place the jaw tips of these cutters on each side of the pinch point and squeeze the handles to cut through your clamp.
For technical drawings and 3-D models, click on a part number.
For Max. Band | Jaw | |||||||
|---|---|---|---|---|---|---|---|---|
| Wd. | Thick. | Overall Lg. | Grip Style | Style | Opening Style | Material | Each | |
For Use On Steel, Stainless Steel | ||||||||
| 11/32" | 0.031" | 8 3/4" | Cushion | Straight | Manual | Steel | 00000000 | 000000 |
Choose-a-Color Identification Bands for Hose and Tube
Color code hose and tube lines in your facility to identify them at a glance. Fit these bands around lines up to 6” in diameter. They require an installation tool (sold separately) to secure them.
For technical drawings and 3-D models, click on a part number.
 |  Black |  Blue |  Brown |  Dark Blue |  Gray |  Green |  Light Blue |  Orange |
 Pink |  Purple |  Red |  Silver |  Tan |  White |  Yellow |
| For Band Wd. | Lg. | Wd. | Ht. | Material | Handle Type | Each | |
| 5/8" | 9 3/4" | 1 1/2" | 1 1/2" | Steel | Ratchet | 000000 | 000000 |
Hose and Tube Clamp Pliers
Install hose and tube clamps with these specially designed pliers.
Pinch clamp pliers crimp pinch clamps closed on hose and tube. Those with straight jaws must be used perpendicular to the hose. Pliers with straight and side jaws are good for tight spaces because you can use them parallel or perpendicular to your hose. Pliers with a center handle reduce the fully open grip span. They also have a higher closing force than other pliers, so they require less strength to crimp pinch clamps closed.
Spring clamp pliers install and remove spring-tension hose clamps. Pliers with adjustable tips accommodate different sized flat-band hose clamps.
Spring-band clamp pliers have jaws specially designed to grip spring-band clamps which are often found on heater and radiator hose. Pliers with flat jaws have a cross-cut tip design to grip most hose clamps from multiple angles. Pliers with a 35° head angle are good for low-clearance spaces. Pliers with a flexible cable allow access to hose and tube clamps that are difficult to reach.
Cushion grip pliers have plastic grips for comfort. Ultra grip pliers have a grip made of hard and soft materials for comfort and slip resistance. They are shaped to fit comfortably in your hand and reduce strain from repetitive tasks.
Jaw | |||||||
|---|---|---|---|---|---|---|---|
| Overall Length | Grip Style | Opening Style | Texture | Tip Type | Material | Each | |
Pinch Clamp Pliers—Straight Jaw | |||||||
| 9" | Cushion | Manual | Smooth | Fixed | Steel | 0000000 | 000000 |
| 9 1/8" | Ultra Grip | Manual | Smooth | Fixed | Steel | 0000000 | 00000 |
Pinch Clamp Pliers—Straight and Side Jaw | |||||||
| 9" | Cushion | Manual | Smooth | Fixed | Steel | 0000000 | 00000 |
Pinch Clamp Pliers—Straight Jaw and Center Handle | |||||||
| 12" | Cushion | Manual | Smooth | Fixed | Steel | 0000000 | 000000 |
Spring Clamp Pliers—Curved Jaw | |||||||
| 8" | Cushion | Manual | Smooth | Fixed | Steel | 0000000 | 00000 |
Spring Clamp Pliers—Flat Jaw | |||||||
| 13" | Cushion | Manual | Smooth | Adjustable | Steel | 0000000 | 00000 |
Spring-Band Clamp Pliers—Flat Jaw | |||||||
| 11 3/4" | Cushion | Spring Assisted | Serrated | Fixed | Steel | 0000000 | 00000 |
Spring-Band Clamp Pliers—Flat Jaw and 35° Head Angle | |||||||
| 17" | Cushion | Spring Assisted | Serrated | Fixed | Steel | 0000000 | 00000 |
Spring-Band Clamp Pliers—Straight Jaw and 24" Flexible Cable | |||||||
| 33" | Plain | Spring Assisted | Smooth | Fixed | Steel | 0000000 | 00000 |