Magnetic Rod Filters
These filters are designed without guide rods to prevent wet and sticky material from blocking flow. Use to pull ferrous metal scrap and particles out of your process line. Mount filters inside gravity hoppers, chutes, drawers, housings, and surge-and-catch bins. Magnets are sealed in the magnetic rod.
Filters with a maximum magnetic pull of 1 lb. catch nails, bolts, washers, staples, and other large iron metal objects.
For technical drawings and 3-D models, click on a part number.
| Lg. | Wd. | No. of Magnetic Rods | Rod Dia. | Spacing Between Rods | Magnet Material | Frame Material | Rod Material | Each | |
1 lbs. Max. Magnetic Pull | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| 6" | 6" | 3 | 1" | 1" | Ceramic (Ferrite) | 304 Stainless Steel | 304 Stainless Steel | 0000000 | 0000000 |
| 8" | 8" | 4 | 1" | 1" | Ceramic (Ferrite) | 304 Stainless Steel | 304 Stainless Steel | 0000000 | 000000 |
| 10" | 10" | 5 | 1" | 1" | Ceramic (Ferrite) | 304 Stainless Steel | 304 Stainless Steel | 0000000 | 000000 |
| 12" | 12" | 6 | 1" | 1" | Ceramic (Ferrite) | 304 Stainless Steel | 304 Stainless Steel | 0000000 | 000000 |
| 12" | 16" | 8 | 1" | 1" | Ceramic (Ferrite) | 304 Stainless Steel | 304 Stainless Steel | 0000000 | 000000 |
| 14" | 14" | 7 | 1" | 1" | Ceramic (Ferrite) | 304 Stainless Steel | 304 Stainless Steel | 0000000 | 000000 |
| For Opening Dia. | OD | No. of Magnetic Rods | Rod Dia. | Spacing Between Rods | Magnet Material | Frame Material | Rod Material | Each | |
1 lbs. Max. Magnetic Pull | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| 6" | 5 7/8" | 3 | 1" | 1" | Ceramic (Ferrite) | 304 Stainless Steel | 304 Stainless Steel | 0000000 | 0000000 |
| 8" | 7.56" | 4 | 1" | 1" | Ceramic (Ferrite) | 304 Stainless Steel | 304 Stainless Steel | 0000000 | 000000 |
| 10" | 9.94" | 5 | 1" | 1" | Ceramic (Ferrite) | 304 Stainless Steel | 304 Stainless Steel | 0000000 | 000000 |
| 12" | 11 1/2" | 6 | 1" | 1" | Ceramic (Ferrite) | 304 Stainless Steel | 304 Stainless Steel | 0000000 | 000000 |
Magnetic Rod Filters with Guide Rods
The guide rods direct flow to the magnetic rods. These filters are helpful in removing dry ferrous metal scrap and particles from fine powder and low-flow applications. Mount inside gravity hoppers, chutes, drawers, housings, and surge-and-catch bins. Magnets are sealed in the magnetic rod.
Filters with a maximum magnetic pull of 1 lb. catch nails, bolts, washers, staples, and other large iron metal objects.
For technical drawings and 3-D models, click on a part number.
| Lg. | Wd. | No. of Magnetic Rods | Rod Dia. | Spacing Between Rods | Magnet Material | Frame Material | Rod Material | Each | |
1 lbs. Max. Magnetic Pull | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| 6" | 6" | 3 | 1" | 1" | Ceramic (Ferrite) | 304 Stainless Steel | 304 Stainless Steel | 0000000 | 0000000 |
| 8" | 8" | 4 | 1" | 1" | Ceramic (Ferrite) | 304 Stainless Steel | 304 Stainless Steel | 0000000 | 000000 |
| 10" | 10" | 5 | 1" | 1" | Ceramic (Ferrite) | 304 Stainless Steel | 304 Stainless Steel | 0000000 | 000000 |
| 12" | 12" | 6 | 1" | 1" | Ceramic (Ferrite) | 304 Stainless Steel | 304 Stainless Steel | 0000000 | 000000 |
| 14" | 14" | 7 | 1" | 1" | Ceramic (Ferrite) | 304 Stainless Steel | 304 Stainless Steel | 0000000 | 00000000 |
| For Opening Dia. | OD | No. of Magnetic Rods | Rod Dia. | Spacing Between Rods | Magnet Material | Frame Material | Rod Material | Each | |
1 lbs. Max. Magnetic Pull | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| 6" | 5 7/8" | 3 | 1" | 1" | Ceramic (Ferrite) | 304 Stainless Steel | 304 Stainless Steel | 0000000 | 0000000 |
| 8" | 7.938" | 4 | 1" | 1" | Ceramic (Ferrite) | 304 Stainless Steel | 304 Stainless Steel | 0000000 | 000000 |
| 10" | 9.94" | 5 | 1" | 1" | Ceramic (Ferrite) | 304 Stainless Steel | 304 Stainless Steel | 0000000 | 000000 |
| 12" | 11 1/2" | 6 | 1" | 1" | Ceramic (Ferrite) | 304 Stainless Steel | 304 Stainless Steel | 0000000 | 000000 |
| 14" | 13.938" | 7 | 1" | 1" | Ceramic (Ferrite) | 304 Stainless Steel | 304 Stainless Steel | 0000000 | 00000000 |
Rods for Magnetic Filters
Replace individual rods in an existing filter or create a custom filter. Magnets are sealed in the rod.
Rods with a maximum magnetic pull of 1 lb. catch nails, bolts, washers, staples, and other large iron metal objects.
For technical drawings and 3-D models, click on a part number.
Mounting Holes | |||||||
|---|---|---|---|---|---|---|---|
| Lg. | Rod Dia. | No. of | Thread Size | Magnet Material | Rod Material | Each | |
1 lbs. Max. Magnetic Pull | |||||||
| 6" | 1" | 2 | 1/4"-20 | Ceramic (Ferrite) | 304 Stainless Steel | 0000000 | 000000 |
| 8" | 1" | 2 | 1/4"-20 | Ceramic (Ferrite) | 304 Stainless Steel | 0000000 | 00000 |
| 10" | 1" | 2 | 1/4"-20 | Ceramic (Ferrite) | 304 Stainless Steel | 0000000 | 00000 |
| 12" | 1" | 2 | 1/4"-20 | Ceramic (Ferrite) | 304 Stainless Steel | 0000000 | 000000 |
Magnetic Plate Filters
Pull iron metal scrap and particles out of your process line as it moves through chutes and hoppers. Mount flush with the surface of your container; position below the flow of material.
Direct-mount filters bolt directly to chutes and hoppers. Can also be installed up to 3” above conveyor belts.
Hinged-mount filters provide access to clean the magnetic surface. You can also mount as a door on chutes and hoppers.
For technical drawings and 3-D models, click on a part number.
For Opening | Mounting Holes | Housing | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Lg. | Wd. | Ht. | Lg. | Wd. | Mounting Hardware Included | No. of | Dia. | Magnet Material | Material | Construction | Each | |
Direct Mount | ||||||||||||
2.5 lbs. Max. Magnetic Pull | ||||||||||||
| 8" | 10" | 2 1/8" | 6" | 8 3/4" | No | 4 | 5/16" | Ceramic (Ferrite) | Steel | Welded | 0000000 | 0000000 |
| 8" | 12" | 2 1/8" | 6" | 10 3/4" | No | 4 | 5/16" | Ceramic (Ferrite) | Steel | Welded | 0000000 | 000000 |
| 8" | 16" | 2 1/8" | 6" | 14 3/4" | No | 4 | 5/16" | Ceramic (Ferrite) | Steel | Welded | 0000000 | 000000 |
| 8" | 24" | 2 1/8" | 6" | 22 3/4" | No | 4 | 5/16" | Ceramic (Ferrite) | Steel | Welded | 0000000 | 000000 |
Hinged Mount | ||||||||||||
2.5 lbs. Max. Magnetic Pull | ||||||||||||
| 8" | 10" | 2 1/8" | 6" | 8 3/4" | No | 4 | 5/16" | Ceramic (Ferrite) | Steel | Welded | 0000000 | 000000 |
| 8" | 12" | 2 1/8" | 6" | 10 3/4" | No | 4 | 5/16" | Ceramic (Ferrite) | Steel | Welded | 0000000 | 000000 |
| 8" | 16" | 2 1/8" | 6" | 14 3/4" | No | 4 | 5/16" | Ceramic (Ferrite) | Steel | Welded | 0000000 | 000000 |
| 8" | 24" | 2 1/8" | 6" | 22 3/4" | No | 4 | 5/16" | Ceramic (Ferrite) | Steel | Welded | 0000000 | 000000 |
Magnetic Pulleys for Conveyor Belts
Separate ferrous and nonferrous material in your line. These pulleys are often used to keep metal scraps from contaminating production lines, or for sorting applications such as recycling. As material moves over the pulley, a magnet tugs ferrous pieces against the belt. Nonferrous material flows over the end of the conveyor, but ferrous pieces travel around the curve and under the conveyor. Once the belt moves past the pulley’s magnetic field, those pieces will fall. Install as either the head or tail pulley.
For technical drawings and 3-D models, click on a part number.
Keyway | 4" Dia. | ||||||||
|---|---|---|---|---|---|---|---|---|---|
| Wd. | For Belt Wd. | Bore Dia. | Wd. | Ht. | Number of Set Screws Included | Material | Magnet Material | Each | |
Tapered—With Keyway | |||||||||
| 4" | 2" | 1 1/4" | 1/4" | 1/8" | 2 | Stainless Steel | Ceramic (Ferrite) | 0000000 | 000000000 |
| 6" | 4" | 1 1/4" | 1/4" | 1/8" | 2 | Stainless Steel | Ceramic (Ferrite) | 0000000 | 00000000 |
| 8" | 6" | 1 1/4" | 1/4" | 1/8" | 4 | Stainless Steel | Ceramic (Ferrite) | 0000000 | 00000000 |
| 10" | 8" | 1 1/4" | 1/4" | 1/8" | 4 | Stainless Steel | Ceramic (Ferrite) | 0000000 | 00000000 |