Use for three-sided connections. Flat sides ensure webbing and strapping lay flat, so they won't slide and bunch.

Flat sides allow webbing and strapping to lay flat, so they won't slide and bunch.

Also known as lap links or repair links.

The flat side allows you to connect webbing and strapping, so they lay flat and resist bunching.

The pear-shaped link provides more room for attachments than standard figure-eight connectors.

Providing better load distribution and alignment than single oblong links, these reduce wear in three and four leg slings.

Also known as master and sling links, a large inner diameter provides room to attach multiple connectors or legs on a sling.

A pear-shaped link and hook for chain shortening allow you to create an adjustable-length chain sling.

Screw the pin into position by hand for quick installation and removal. They're for use in low-vibration applications where the shackle remains stationary.

Screw the pin into position by hand for quick installation and removal. They're for use in low-vibration applications where the shackle remains stationary.

One end has a bolt fastened with a nut and cotter pin for a more secure connection than flush-pin connectors.

A bolt fastened with a nut and cotter pin makes these shackles more secure than screw-pin shackles.

A lip on the shackle keeps the screw from falling out when loosened.

Minimize twisting and knotting of rope and chain.

For use in low-vibration applications where the shackle remains stationary.

A lip on the shackle keeps the pin from falling out when loosened.

Disconnect by pulling the lever or attach rope to the eye on the lever for remote release.

Attach a rope to the ring on the pin for remote release where access in limited. These shackes have a clevis end for making pivoting connections.

With a narrow opening and contoured sides, these securely hold a single link of chain to prevent overtightening when lifting a load.

A spring-loaded pin ensures chain won't separate from the hook when the load slackens. Connect your chain to the eye end.

These have a removable half-link to attach large rings, links, and other closed fittings.

These rotate for easy positioning before a load is applied. They have a latch to ensure rope, chain, and fittings won't separate from the hook when the load slackens.

Screw these hooks into place and secure with the included nut.

These rotate for easy positioning before a load is applied.

These have a latch that locks closed when a load is applied for a more secure connection than standard hooks. They rotate for easy positioning before a load is applied.

For a more secure connection than standard hooks, the latch locks closed when a load is applied.

Use these on thick molds, castings, and objects that don't have attachment points. Also known as foundry hooks.

Often used in binding and tie-down applications, these securely hold a single link of chain.

Weld these hooks into place.

Easily slip chain, rope, and fittings on and off these open-mouth hooks. Attach your chain to the eye end.

Easily slip chain, rope, and fittings on and off these open-mouth hooks. Attach your chain to the clevis end.

Create fast connections with items, such as rope, chain, and straps.

A wide opening accepts large diameters of rope and pipe. Squeeze the trigger to release.

For a more secure connection than standard trigger-locking snaps, squeeze the trigger and slide the latch grip down to release.

Lock the bolt with wire or a cable tie for a secure connection.

To open, lift and twist the latch 90°.

A lock slides upward over the latch to lock. The latch opens outward to accept large diameters of rope.

These rotate for easy positioning before a load is applied to minimize twisting and knotting of rope and chain.

For easy positioning before a load is applied, these rotate to minimize twisting and knotting of rope and chain.

The snap and split ring swing freely and pull from the center for easy alignment.

Minimize twisting and knotting of rope and chain and adjust the position of a fitting or an object under load.

For extra security, these have a latch that snaps back into place to secure your load.

Slide chain and fittings onto the open ends.

These hooks have closed ends on both sides.

Mount these links in a drilled hole to secure small items such as pens. Links can also be attached as the end of a pull chain.

Thread chain through the hole of these links to form an adjustable loop or connect chain ends to form a longer chain.

Also known as ball chain, use this chain to keep tools with machines, keys with chucks, and gas and dust caps with tanks.

A quick-stop lanyard must be used when you have less than 18 1/2 ft. of fall clearance as it will stop your fall within a few inches.