Self-priming up to 6 ft., these pumps have a stainless steel housing sealed with PTFE to resist chemicals such as ammonia and detergents as well as harsh solvents including methyl ethyl ketone (MEK).

A Noryl housing and impeller with a fluoroelastomer seal provide good resistance to acids, alkalies, and inorganic solvents. These pumps are often used for circulating mild caustics such as salt water and antifreeze

A powerful motor provides twice the flow rate of other extended-life circulation pumps. The motor is totally enclosed fan-cooled (TEFC) for use in dusty, dirty, and damp environments. Magnets turn the impeller to eliminate seal wear and leakage for a long service life. These pumps are often used with electroplating and photographic solutions.

Propel liquid higher and farther than standard high-efficiency circulation pumps. These pumps use less electricity to achieve the same flow rates as other circulation pumps.

Also known as turbine pumps, these have a specialized impeller that propels water about four times higher and farther than standard circulation pumps. They're commonly used with chillers, heat exchangers, and boiler feed systems.

Move water and coolants, such as ethylene glycol, in boiler feed systems, cooling towers, and heat exchangers.

Drain underground tanks and process wastewater with pumps that can be installed up to 20 ft. above your liquid source.

The motor is totally enclosed fan-cooled (TEFC) for use in dusty, dirty, and damp environments. Install these pumps up to 20 ft. above your liquid source to drain underground tanks and process wastewater.

A sealless construction means these pumps have few moving parts that can fail and shorten service life. The intake can be completely submerged in liquid.

Use when space is limited—these pumps connect to a pipe coming from your tank so you can place the pump in another location.

Match your pump’s manufacturer and model number to choose the right replacement impeller.

Commonly used in food, beverage, and dairy processing, these pumps are 3-A certified to meet sanitary design standards.

Transfer hot oil up to 650° F in demanding applications such as plastic mold injecting and chemical processing.