Also known as wash bottles, these dispense liquid at a downward angle.

Made of FEP plastic, these are our most chemical-resistant squeeze bottles. They are also autoclavable.

These bottles are fluorinated to prevent contents from being absorbed.

Squeeze out liquids one drop at a time.

Long nozzles allow dispensing in hard-to-reach places.

Sets include eight squeeze bottles with nozzle covers and a steel holder.

Pump the handle to pressurize the tank, then squeeze the trigger on the wand to spray. These sprayers are often used for degreasers, insecticides, disinfectants, cleaning solutions, and herbicides.

These sprayers have a more durable construction than our other plastic hand-pump sprayers.

Carry these sprayers comfortably on your back using the padded shoulder straps.

Fill air-atomizing sprayers with these pitchers. The nozzle is designed to fit into the sprayer opening and has a removable brass filter to strain out foreign particles.

Spray thin liquids evenly without propellant. Fill the sprayer and pressurize with compressed air.

An electrostatic charging ring in these backpack sprayers gives spraying liquids a positive charge, so that disinfectant or insecticide will cling to surfaces for an even coating.

Disinfect bathrooms, desks, doors, and other small areas and items with these portable sprayers.

A rechargeable battery keeps these sprayers pressurized, so you don’t have to stop to pump while spraying herbicides, insecticides, disinfectants, cleaners, and other solutions.

Unlike standard spray bottles, these dispense oil and other high-viscosity liquids without clogging.

Release a fine mist spray similar to an aerosol without propellants or pressure.

Spray at any angle—even upside down.

These spray bottles resist harsh chemicals and solvents.

Access tight spaces with the 36" long tube that extends from these spray bottles.

Moisten swabs and wipes by pushing down on the top.

Turn these bottles upside down and press the flange to dispense.

Squeeze the ball to create pressure, then push down on the dispenser to dispense flammable liquids into vials, test tubes, and other small containers. Only a PTFE tube and stainless steel pump come into contact with the liquid.

Store up to five micropipettes in these racks.

Use with a pipette to comfortably draw and dispense exact quantities with one hand.

These fixed-volume micropipettes dispense a small amount of liquid for speedy, routine dispensing jobs.

These bottles have a squeeze-bulb dropper attached to the lid.

Cover the top opening with your thumb to control the flow of liquid one drop at a time.

Flatten these carboys for convenient storage.

Squeeze the bottle to force liquid through the tube and into the cup, then pour out the measured amount.

Fill these air-and liquid-tight bottles directly from your line to store, test, and ship liquids. Connect to a quick-clamp fitting with the included gasket and clamp.

The open top makes these easier to fill than jugs, while the spout gives more control when pouring.

Also known as Type II safety cans, these have two openings—one for filling, one for pouring.

Tip cans down for controlled dispensing, then swing them back to their upright position.

The foot pedal allows hands-free operation.

A lever handle maximizes output with each stroke for low-effort dispensing.

Rotate the handle to dispense a continuous flow of liquid.

Designed to move low volumes of caustic liquids in confined areas, these pumps have a thin intake tube and a small handle.

Made with PTFE components, these pumps stand up to aggressive chemicals our other drum pumps can't, such as hydrochloric acid, bleach, sodium hydroxide, and methyl ethyl ketone.

All of these pumps have bonding and grounding wires, while some also have an internal flame arrester, to pump fuel, cleaning solvents, and lacquer thinners.

A lever handle delivers fluid on both the forward and backward strokes for faster dispensing than other drum pumps.

Remove liquid from hard‐to‐reach areas with a long, flexible intake tube that extends into deep and hard‐to-access tanks.

A filter/lubricator ensures efficiency and reduces wear on the pump. Often used with hydraulic oil and motor oil in addition to acidic and alkaline liquids, these pumps have a nonsparking motor for use in applications where electricity is unavailable or dangerous.

These pumps have a motor that is rated for IEC Zone 1, Groups IIB and IIA; and IEC Zone 21, Groups IIIC, IIIB, and IIIA hazardous locations with flammable gases and vapors, so they can be used with liquids such as acetone, ethanol, methyl ethyl ketone, xylene, and mineral spirits.

With a nozzle and hose, these pumps allow you to dispense directly into your container. They move liquid by pressurizing the drum, so they have few moving parts prone to wear and tear.

Use these pumps with fuel and flammable liquids, such as acetone, ethanol, and gasoline. They handle nearly twice the amount of pressure as other air-powered drum pumps to move high-viscosity liquids.

Quickly generate suction with battery power.

Operating on a 12-volt battery, use these pumps to transfer and drain fuel such as gasoline, diesel fuel, and kerosene.

For accurate dispensing in extremely low-flow applications, these pumps allow you to adjust flow in 2% increments.

Including nozzles and connectors, these pumps come with everything you need to start pumping.

These pumps quickly empty drum contents by moving 48 gallons of liquid per minute. Their electric motors are UL listed for use in environments with flammable gases and combustible dust.

Drain and transfer liquid more quickly and easily than hand-operated pumps and siphon pumps.

Install these pumps in a panel cutout. Often used in food and beverage, pharmaceutical, and lab applications, they dispense small amounts of liquid at a set rate.

Also known as peristaltic pumps and tubing pumps, these maintain a fixed flow rate.

Commonly used in mining, wastewater treatment, and other systems that require large-diameter hose, these pumps have flanged hose connections and large diameter tubing.

For high-volume chemical sampling and draining, these pumps have a powerful motor that enables them to move 2,448 gallons of liquid per day.

These pumps can be used with pressures four times higher than standard pumps for chemicals.

With a footprint that's only a few inches in any direction, these pumps fit into compact systems to dispense small amounts of acids, cleaning fluids, and other chemicals. They're often used in sterilization, photochemical, and water treatment systems.

Rated for liquids with a viscosity up to 10,000 centipoise, these pumps can be used with very thick chemicals such as electropolishing solutions.

Also known as gear pumps, these produce a smooth flow of liquid for applications such as cooling engines, powering hydraulic equipment, and extracting liquid from holding tanks.

Rated for continuous use, these pumps are often used to move caustics such as antifreeze and salt water. Mount them in any position, even upside down. Also known as diaphragm pumps, they are typically used for low-flow spraying, draining, and washdown applications.

An aluminum enclosure around the motor provides protection in dusty and dirty environments. Designed to fit into small equipment, these pumps have miniature gears and a subfractional horsepower motor for low-flow applications.

A high-horsepower motor moves oil with a viscosity similar to SAE 60 motor oil. Also known as gear pumps, these produce a smooth flow of liquid to lubricate equipment and blend oils.

Also known as closed-head pails, these rectangular jugs have a small top opening. Use them to safely ship hazardous liquids.

The jug inside these cardboard containers collapses as it dispenses for uninterrupted flow.