Class 10 Steel Hex Nuts | McMaster-Carr

Filter by

Thread Size

Material

Hex Nut Profile

System of Measurement

Height

Thread Direction

Width

Fastener Strength Grade/Class

Thread Pitch

Thread Type

Specifications Met

Federal Specification

Thread Spacing

Performance

Finish

Hot-Dipped Galvanized

Fastener Strength Rating

Thread Fit

Unified Standard Class 2B

Unified Standard Class 3B

DFARS Specialty Metals

REACH

RoHS

Compliant with Exemptions

Not Compliant

Export Control Classification Number (ECCN)

EAR99

Military Specification

Number of Pieces

Container Features

1,398 Products

About Hex Nuts

Choose a hex nut with the right profile, material, and strength for your application.

Hex Nut Profile

Standard

The most common hex nuts for fastening machinery and equipment

595 products

Thin

Fit in spaces with low clearance

469 products

Hex Nut Profile

Heavy

Wider and taller than standard nuts to handle heavier loads

237 products

High

Larger gripping area keeps wrenches from slipping off as you tighten

19 products

Structural Heavy-Profile Hex Nuts

These nuts are designed to secure ASTM A325 screws in structural joints, such as mating I-beams, columns, and joists. About 10% wider and taller than standard-profile hex nuts, they handle heavier loads by distributing them over a larger area.

High-Strength Steel

Rated Grade 8, Grade C, or Class 10, these nuts are about 25% stronger than medium-strength steel nuts. To avoid stripped threads during installation, make sure your screw has a comparable strength rating.

Black-Oxide Steel—Typically chosen for their appearance, these nuts have a dark, matte coating to create a finished look. They offer minimal corrosion resistance, so they're best for dry environments.

Hot-Dipped Galvanized Steel—Combines the strength of steel with the rust resistance of stainless steel. These nuts are an economical alternative to 18-8 stainless steel in wet and outdoor environments, but they won't hold up to salt water and chemicals. The galvanized finish is thicker than other types of coatings, so the threads may be more likely to stick during installation. Use with other hot-dipped galvanized fasteners.

Steel—Best for dry environments since moisture will cause these nuts to rust.

	Wd.	Ht.	Fastener Strength Grade/Class	Specs. Met	Pkg. Qty.		Pkg.
Black-Oxide Steel



	1/2"-13	7/8"	31/64"	ASTM Grade C	ASTM A563	10	90580A109	00000
	5/8"-11	1 1/16"	39/64"	ASTM Grade C	ASTM A563	10	90580A204	00000
	3/4"-10	1 1/4"	47/64"	ASTM Grade C	ASTM A563	5	90580A312	0000
	7/8"-9	1 7/16"	55/64"	ASTM Grade C	ASTM A563	1	90580A366	0000
	1"-8	1 5/8"	63/64"	ASTM Grade C	ASTM A563	1	90580A383	0000
	1 1/8"-7	1 3/4"	1 7/64"	ASTM Grade C	ASTM A563	1	90580A400	0000
	1 1/4"-7	2"	1 7/32"	ASTM Grade C	ASTM A563	1	90580A697	00000
	1 1/2"-6	2 3/8"	1 15/32"	ASTM Grade C	ASTM A563	1	90580A717	00000


	Hot-Dipped Galvanized Steel



			1/2"-13	7/8"	31/64"	ASTM Grade C	ASTM A563	5	90580A737	0000
			5/8"-11	1 1/16"	39/64"	ASTM Grade C	ASTM A563	1	90580A788	0000
			3/4"-10	1 1/4"	47/64"	ASTM Grade C	ASTM A563	1	90580A792	0000
			7/8"-9	1 7/16"	55/64"	ASTM Grade C	ASTM A563	1	90580A815	00000
			1"-8	1 5/8"	63/64"	ASTM Grade C	ASTM A563	1	90580A822	00000
			1 1/8"-7	1 3/4"	1 7/64"	ASTM Grade C	ASTM A563	1	90580A823	00000
			1 1/4"-7	2"	1 7/32"	ASTM Grade C	ASTM A563	1	90580A827	00000


			Steel



					1/2"-13	7/8"	31/64"	ASTM Grade C	ASTM A563	25	90580A315	00000
					5/8"-11	1 1/16"	39/64"	ASTM Grade C	ASTM A563	10	90580A320	0000
					3/4"-10	1 1/4"	47/64"	ASTM Grade C	ASTM A563	10	90580A325	00000
					7/8"-9	1 7/16"	55/64"	ASTM Grade C	ASTM A563	10	90580A330	00000
					1"-8	1 5/8"	63/64"	ASTM Grade C	ASTM A563	5	90580A335	00000
					1 1/8"-7	1 3/4"	1 7/64"	ASTM Grade C	ASTM A563	1	90580A844	0000
					1 1/4"-7	2"	1 7/32"	ASTM Grade C	ASTM A563	1	90580A345	0000
					1 1/2"-6	2 3/8"	1 15/32"	ASTM Grade C	ASTM A563	1	90580A957	00000

Extreme-Strength Steel

Rated Grade DH, these nuts are about 20% stronger than high-strength steel nuts. To avoid stripped threads during installation, make sure your screw has a comparable strength rating.

Steel—Best for dry environments since moisture will cause these nuts to rust.

	Wd.	Ht.	Fastener Strength Grade/Class	Specs. Met	Pkg. Qty.		Pkg.
Hot-Dipped Galvanized Steel



	1/2"-13	7/8"	31/64"	ASTM Grade DH	ASTM A563	25	91694A315	000000
	5/8"-11	1 1/16"	39/64"	ASTM Grade DH	ASTM A563	10	91694A320	00000
	3/4"-10	1 1/4"	47/64"	ASTM Grade DH	ASTM A563	10	91694A325	00000
	7/8"-9	1 7/16"	55/64"	ASTM Grade DH	ASTM A563	10	91694A330	00000
	1"-8	1 5/8"	63/64"	ASTM Grade DH	ASTM A563	5	91694A335	00000
	1 1/4"-7	2"	1 7/32"	ASTM Grade DH	ASTM A563	1	91694A340	0000
	1 1/2"-6	2 3/8"	1 15/32"	ASTM Grade DH	ASTM A563	1	91694A345	00000


	Steel



			1/2"-13	7/8"	31/64"	ASTM Grade DH	ASTM A563	25	98427A150	00000
			5/8"-11	1 1/16"	39/64"	ASTM Grade DH	ASTM A563	10	98427A200	00000
			3/4"-10	1 1/4"	47/64"	ASTM Grade DH	ASTM A563	10	98427A250	00000
			7/8"-9	1 7/16"	55/64"	ASTM Grade DH	ASTM A563	5	98427A300	00000
			1"-8	1 5/8"	63/64"	ASTM Grade DH	ASTM A563	1	98427A350	0000
			1 1/8"-7	1 13/16"	1 7/64"	ASTM Grade DH	ASTM A563	1	98427A400	0000
			1 1/4"-7	2"	1 7/32"	ASTM Grade DH	ASTM A563	1	98427A450	0000
			1 1/2"-6	2 3/8"	1 15/32"	ASTM Grade DH	ASTM A563	1	98427A600	00000

Hex Nuts

The most commonly used hex nuts, these are suitable for fastening most machinery and equipment.

Medium-Strength Steel

Image of Product. Front orientation. Hex Nuts. Hex Nuts.

These Grade 5 or Class 8 nuts are your go-to for fastening most machinery and equipment. To avoid stripped threads during installation, make sure your screw has a comparable strength rating.

Steel—Best for dry environments since moisture will cause these nuts to rust.

	Thread Size	Wd.	Ht.	Fastener Strength Grade/Class	Specs. Met	Pkg. Qty.		Pkg.
Steel



		1/4"-20	7/16"	7/32"	SAE Grade 5	ASME B18.2.2	100	95505A601	00000
		1/4"-28	7/16"	7/32"	SAE Grade 5	ASME B18.2.2	100	95505A611	0000
		5/16"-18	1/2"	17/64"	SAE Grade 5	ASME B18.2.2	100	95505A602	0000
		5/16"-24	1/2"	17/64"	SAE Grade 5	ASME B18.2.2	100	95505A612	0000
		3/8"-16	9/16"	21/64"	SAE Grade 5	ASME B18.2.2	100	95505A603	00000
		3/8"-24	9/16"	21/64"	SAE Grade 5	ASME B18.2.2	100	95505A613	0000
		7/16"-14	11/16"	3/8"	SAE Grade 5	ASME B18.2.2	100	95505A604	00000
		7/16"-20	11/16"	3/8"	SAE Grade 5	ASME B18.2.2	100	95505A614	00000
		1/2"-13	3/4"	7/16"	SAE Grade 5	ASME B18.2.2	50	95505A605	00000
		1/2"-20	3/4"	7/16"	SAE Grade 5	ASME B18.2.2	50	95505A615	00000


		9/16"-12	7/8"	31/64"	SAE Grade 5	ASME B18.2.2	25	95505A606	00000
		9/16"-18	7/8"	31/64"	SAE Grade 5	ASME B18.2.2	25	95505A616	0000
		5/8"-11	15/16"	35/64"	SAE Grade 5	ASME B18.2.2	25	95505A607	00000
		5/8"-18	15/16"	35/64"	SAE Grade 5	ASME B18.2.2	25	95505A617	00000
		3/4"-10	1 1/8"	41/64"	SAE Grade 5	ASME B18.2.2	25	95505A608	00000
		3/4"-16	1 1/8"	41/64"	SAE Grade 5	ASME B18.2.2	25	95505A618	00000
		7/8"-9	1 5/16"	3/4"	SAE Grade 5	ASME B18.2.2	10	95505A609	00000
		7/8"-14	1 5/16"	3/4"	SAE Grade 5	ASME B18.2.2	10	95505A619	00000
		1"-8	1 1/2"	55/64"	SAE Grade 5	ASME B18.2.2	5	95505A610	0000
		1"-12	1 1/2"	55/64"	SAE Grade 5	ASME B18.2.2	1	95505A620	0000


		1"-14	1 1/2"	55/64"	SAE Grade 5	ASME B18.2.2	5	95505A621	0000
		1 1/8"-7	1 11/16"	31/32"	SAE Grade 5	ASME B18.2.2	5	95505A622	00000
		1 1/8"-12	1 11/16"	31/32"	SAE Grade 5	ASME B18.2.2	5	95505A626	00000
		1 1/4"-7	1 7/8"	1 1/16"	SAE Grade 5	ASME B18.2.2	5	95505A623	0000
		1 1/4"-12	1 7/8"	1 1/16"	SAE Grade 5	ASME B18.2.2	5	95505A627	00000
		1 3/8"-6	2 1/16"	1 11/64"	SAE Grade 5	ASME B18.2.2	1	95505A624	0000
		1 3/8"-12	2 1/16"	1 11/64"	SAE Grade 5	ASME B18.2.2	1	95505A628	0000
		1 1/2"-6	2 1/4"	1 9/32"	SAE Grade 5	ASME B18.2.2	1	95505A625	0000
		1 1/2"-12	2 1/4"	1 9/32"	SAE Grade 5	ASME B18.2.2	1	95505A629	0000
		1 3/4"-5	2 5/8"	1 1/2"	SAE Grade 5	ASME B18.2.2	1	95505A642	00000


		1 3/4"-12	2 5/8"	1 1/2"	SAE Grade 5	ASME B18.2.2	1	95505A630	00000
		2"-4 1/2	3"	1 23/32"	SAE Grade 5	ASME B18.2.2	1	95505A661	00000
		2"-12	3"	1 23/32"	SAE Grade 5	ASME B18.2.2	1	95505A631	00000
		M2 × 0.4 mm	4 mm	1.6 mm	ISO Class 8	DIN 934	100	90592A075	0000
		M2.5 × 0.45 mm	5 mm	2 mm	ISO Class 8	DIN 934	100	90592A080	0000
		M3 × 0.5 mm	5.5 mm	2.4 mm	ISO Class 8	DIN 934	100	90592A085	0000
		M3.5 × 0.6 mm	6 mm	2.8 mm	ISO Class 8	DIN 934	100	90592A104	00000
		M4 × 0.7 mm	7 mm	3.2 mm	ISO Class 8	DIN 934	100	90592A090	0000
		M5 × 0.8 mm	8 mm	4 mm	ISO Class 8	DIN 934	100	90592A095	0000
		M6 × 0.75 mm	10 mm	5 mm	ISO Class 8	DIN 934	100	91423A110	00000


		M6 × 1 mm	10 mm	5 mm	ISO Class 8	DIN 934	100	90592A016	0000
		M7 × 1 mm	11 mm	5.5 mm	ISO Class 8	DIN 934	100	90592A018	0000
		M8 × 1 mm	13 mm	6.5 mm	ISO Class 8	DIN 934	100	91423A120	00000
		M8 × 1.25 mm	13 mm	6.5 mm	ISO Class 8	DIN 934	100	90592A022	0000
		M10 × 1 mm	17 mm	8 mm	ISO Class 8	DIN 934	50	91423A140	00000
		M10 × 1.25 mm	17 mm	8 mm	ISO Class 8	DIN 934	50	91423A130	00000
		M10 × 1.5 mm	17 mm	8 mm	ISO Class 8	DIN 934	100	90592A024	00000
		M12 × 1 mm	19 mm	10 mm	ISO Class 8	DIN 934	10	91423A170	00000
		M12 × 1.25 mm	19 mm	10 mm	ISO Class 8	DIN 934	25	91423A160	00000
		M12 × 1.5 mm	19 mm	10 mm	ISO Class 8	DIN 934	25	91423A150	00000


		M12 × 1.75 mm	19 mm	10 mm	ISO Class 8	DIN 934	100	90592A028	00000
M14 × 1.25 mm		22 mm	11 mm	ISO Class 8	DIN 934	5	91423A190	00000
M14 × 1.5 mm	22 mm	11 mm	ISO Class 8	DIN 934	25	91423A180	00000
M14 × 2 mm	22 mm	11 mm	ISO Class 8	DIN 934	25	90592A032	00000
M16 × 1.5 mm	24 mm	13 mm	ISO Class 8	DIN 934	20	91423A210	00000
M16 × 2 mm	24 mm	13 mm	ISO Class 8	DIN 934	25	90592A034	00000
M18 × 1.5 mm	27 mm	15 mm	ISO Class 8	DIN 934	10	91423A220	00000
M18 × 2.5 mm	27 mm	15 mm	ISO Class 8	DIN 934	25	90592A045	00000
M20 × 1.5 mm	30 mm	16 mm	ISO Class 8	DIN 934	5	91423A240	0000
M20 × 2 mm	30 mm	16 mm	ISO Class 8	DIN 934	1	91423A230	0000
M20 × 2.5 mm	30 mm	16 mm	ISO Class 8	DIN 934	10	90592A050	00000
M22 × 1.5 mm	32 mm	18 mm	ISO Class 8	DIN 934	1	91423A260	0000
M22 × 2 mm	32 mm	18 mm	ISO Class 8	DIN 934	1	91423A250	0000
M22 × 2.5 mm	32 mm	18 mm	ISO Class 8	DIN 934	10	90592A109	00000
M24 × 1.5 mm	36 mm	19 mm	ISO Class 8	DIN 934	1	91423A280	0000
M24 × 2 mm	36 mm	19 mm	ISO Class 8	DIN 934	5	91423A270	00000
M24 × 3 mm	36 mm	19 mm	ISO Class 8	DIN 934	10	90592A055	00000
M27 × 1.5 mm	41 mm	22 mm	ISO Class 8	DIN 934	1	91423A310	00000
M27 × 2 mm	41 mm	22 mm	ISO Class 8	DIN 934	1	91423A290	0000
M27 × 3 mm	41 mm	22 mm	ISO Class 8	DIN 934	1	90592A313	0000
M30 × 2 mm	46 mm	24 mm	ISO Class 8	DIN 934	1	91423A320	0000
M30 × 3.5 mm	46 mm	24 mm	ISO Class 8	DIN 934	5	90592A065	00000
M33 × 2 mm	50 mm	26 mm	ISO Class 8	DIN 934	1	91423A340	00000
M33 × 3 mm	50 mm	26 mm	ISO Class 8	DIN 934	1	91423A330	0000
M33 × 3.5 mm	50 mm	26 mm	ISO Class 8	DIN 934	1	90592A341	0000
M36 × 3 mm	55 mm	29 mm	ISO Class 8	DIN 934	1	91423A350	0000
M36 × 4 mm	55 mm	29 mm	ISO Class 8	DIN 934	1	90592A070	00000
M39 × 2 mm	60 mm	31 mm	ISO Class 8	DIN 934	1	91423A460	00000
M39 × 3 mm	60 mm	31 mm	ISO Class 8	DIN 934	1	91423A360	00000
M39 × 4 mm	60 mm	31 mm	ISO Class 8	DIN 934	1	90592A385	00000
M42 × 3 mm	65 mm	34 mm	ISO Class 8	DIN 934	1	91423A370	00000
M42 × 4.5 mm	65 mm	34 mm	ISO Class 8	DIN 934	1	90592A472	00000
M45 × 3 mm	70 mm	36 mm	ISO Class 8	DIN 934	1	91423A380	00000
M45 × 4.5 mm	70 mm	36 mm	ISO Class 8	DIN 934	1	90592A495	00000
M48 × 3 mm	75 mm	38 mm	ISO Class 8	DIN 934	1	91423A390	00000
M48 × 5 mm	75 mm	38 mm	ISO Class 8	DIN 934	1	90592A872	00000
M52 × 3 mm	80 mm	42 mm	ISO Class 8	DIN 934	1	91423A410	00000
M56 × 3 mm	85 mm	45 mm	ISO Class 8	DIN 934	1	91423A430	00000
M56 × 4 mm	85 mm	45 mm	ISO Class 8	DIN 934	1	91423A420	00000
M60 × 4 mm	90 mm	48 mm	ISO Class 8	DIN 934	1	91423A440	00000
M72 × 4 mm	105 mm	58 mm	ISO Class 8	DIN 934	1	91423A450	000000

High-Strength Steel

Rated Grade 8, Grade C, or Class 10, these nuts are about 25% stronger than medium-strength steel nuts. They are commonly used to fasten components in valves, pumps, motors, and other high-stress applications. To avoid stripped threads during installation, make sure your screw has a comparable strength rating.

Steel—Best for dry environments since moisture will cause these nuts to rust.

	Thread Size	Wd.	Ht.	Fastener Strength Grade/Class	Specs. Met	Pkg. Qty.		Pkg.
Steel



		1/4"-20	7/16"	7/32"	SAE Grade 8	—	100	90499A029	00000
		1/4"-28	7/16"	7/32"	SAE Grade 8	—	100	90499A805	0000
		5/16"-18	1/2"	17/64"	SAE Grade 8	—	100	90499A030	0000
		5/16"-24	1/2"	17/64"	SAE Grade 8	—	100	90499A810	0000
		3/8"-16	9/16"	21/64"	SAE Grade 8	—	100	90499A031	00000
		3/8"-24	9/16"	21/64"	SAE Grade 8	—	100	90499A815	00000
		7/16"-14	11/16"	3/8"	SAE Grade 8	—	100	90499A032	00000
		7/16"-20	11/16"	3/8"	SAE Grade 8	—	100	90499A820	00000
		1/2"-13	3/4"	7/16"	SAE Grade 8	—	50	90499A033	00000
		1/2"-20	3/4"	7/16"	SAE Grade 8	—	50	90499A825	00000


		9/16"-12	7/8"	31/64"	SAE Grade 8	—	50	90499A827	00000
		9/16"-18	7/8"	31/64"	SAE Grade 8	—	50	90499A830	00000
		5/8"-11	15/16"	35/64"	SAE Grade 8	—	50	90499A832	00000
		5/8"-18	15/16"	35/64"	SAE Grade 8	—	25	90499A835	00000
		3/4"-10	1 1/8"	41/64"	SAE Grade 8	—	25	90499A837	00000
		3/4"-16	1 1/8"	41/64"	SAE Grade 8	—	10	90499A840	0000
		7/8"-9	1 5/16"	3/4"	SAE Grade 8	—	10	90499A842	00000
		7/8"-14	1 5/16"	3/4"	SAE Grade 8	—	10	90499A845	00000
		1"-12	1 1/2"	55/64"	SAE Grade 8	—	1	90499A850	0000
		1"-14	1 1/2"	55/64"	SAE Grade 8	—	10	90499A855	00000


		1 1/8"-7	1 11/16"	31/32"	SAE Grade 8	—	5	90499A857	00000
		1 1/8"-12	1 11/16"	31/32"	SAE Grade 8	—	5	90499A858	00000
		1 1/4"-7	1 7/8"	1 1/16"	SAE Grade 8	—	5	90499A859	00000
		1 1/4"-12	1 7/8"	1 1/16"	SAE Grade 8	—	5	90499A860	00000
		1 3/8"-6	2 1/16"	1 11/64"	SAE Grade 8	—	1	90499A042	0000
		1 3/8"-12	2 1/16"	1 11/64"	SAE Grade 8	—	1	90499A863	0000
		1 1/2"-6	2 1/4"	1 9/32"	SAE Grade 8	—	1	90499A041	0000
		1 1/2"-12	2 1/4"	1 9/32"	SAE Grade 8	—	1	90499A865	0000
		1 3/4"-5	2 5/8"	1 1/2"	SAE Grade 8	—	1	90499A044	00000
		1 3/4"-12	2 5/8"	1 1/2"	SAE Grade 8	—	1	90499A868	00000


		2"-4 1/2	3"	1 23/32"	SAE Grade 8	—	1	90499A045	00000
		2"-12	3"	1 23/32"	SAE Grade 8	—	1	90499A870	00000
		M3 × 0.5 mm	5.5 mm	2.4 mm	ISO Class 10	DIN 934	25	90685A037	00000
		M4 × 0.7 mm	7 mm	3.2 mm	ISO Class 10	DIN 934	100	90685A039	0000
		M5 × 0.8 mm	8 mm	4 mm	ISO Class 10	DIN 934	100	90685A041	0000
		M6 × 1 mm	10 mm	5 mm	ISO Class 10	DIN 934	100	90685A043	00000
		M8 × 1 mm	13 mm	6.5 mm	ISO Class 10	DIN 934	50	4379N111	00000
		M8 × 1.25 mm	13 mm	6.5 mm	ISO Class 10	DIN 934	100	90685A045	00000
		M10 × 1 mm	17 mm	8 mm	ISO Class 10	DIN 934	10	4379N112	0000
		M10 × 1.25 mm	17 mm	8 mm	ISO Class 10	DIN 934	10	4379N113	0000


		M10 × 1.5 mm	17 mm	8 mm	ISO Class 10	DIN 934	50	90685A046	00000
		M12 × 1 mm	19 mm	10 mm	ISO Class 10	DIN 934	10	4379N114	00000
		M12 × 1.25 mm	19 mm	10 mm	ISO Class 10	DIN 934	25	4379N115	00000
		M12 × 1.5 mm	19 mm	10 mm	ISO Class 10	DIN 934	10	4379N116	0000
		M12 × 1.75 mm	19 mm	10 mm	ISO Class 10	DIN 934	25	90685A110	00000
		M14 × 1.5 mm	22 mm	11 mm	ISO Class 10	DIN 934	10	4379N117	0000
		M14 × 2 mm	22 mm	11 mm	ISO Class 10	DIN 934	25	90685A115	00000
		M16 × 1.5 mm	24 mm	13 mm	ISO Class 10	DIN 934	10	4379N118	00000
		M16 × 2 mm	24 mm	13 mm	ISO Class 10	DIN 934	10	90685A120	00000
		M18 × 1.5 mm	27 mm	15 mm	ISO Class 10	DIN 934	5	4379N119	0000


		M18 × 2.5 mm	27 mm	15 mm	ISO Class 10	DIN 934	10	90685A125	00000
M20 × 1.5 mm		30 mm	16 mm	ISO Class 10	DIN 934	5	4379N12	0000
M20 × 2 mm	30 mm	16 mm	ISO Class 10	DIN 934	5	4379N121	00000
M20 × 2.5 mm	30 mm	16 mm	ISO Class 10	DIN 934	10	90685A130	00000
M22 × 1.5 mm	32 mm	18 mm	ISO Class 10	DIN 934	1	4379N122	0000
M22 × 2.5 mm	32 mm	18 mm	ISO Class 10	DIN 934	5	90685A101	00000
M24 × 1.5 mm	36 mm	19 mm	ISO Class 10	DIN 934	1	4379N123	0000
M24 × 2 mm	36 mm	19 mm	ISO Class 10	DIN 934	1	4379N124	0000
M24 × 3 mm	36 mm	19 mm	ISO Class 10	DIN 934	5	90685A060	00000
M27 × 2 mm	41 mm	22 mm	ISO Class 10	DIN 934	1	4379N125	0000
M27 × 3 mm	41 mm	22 mm	ISO Class 10	DIN 934	5	90685A102	00000
M30 × 1.5 mm	46 mm	24 mm	ISO Class 10	DIN 934	1	4379N126	00000
M30 × 2 mm	49 mm	24 mm	ISO Class 10	DIN 934	1	4379N127	00000
M30 × 3.5 mm	46 mm	24 mm	ISO Class 10	DIN 934	1	90685A070	0000
M36 × 2 mm	55 mm	29 mm	ISO Class 10	DIN 934	1	4379N128	00000
M36 × 4 mm	55 mm	29 mm	ISO Class 10	DIN 934	1	90685A080	00000
M42 × 4.5 mm	65 mm	34 mm	ISO Class 10	DIN 934	1	90685A103	00000
M48 × 5 mm	75 mm	38 mm	ISO Class 10	DIN 934	1	90685A104	00000

High-Strength Steel with Material Certificate

Nuts include a report with a traceable lot number and a description of their chemical and physical properties. Rated Grade 8, Grade C, or Class 10, these nuts are about 25% stronger than medium-strength steel nuts. They are commonly used to fasten components in valves, pumps, motors, and other high-stress applications. To avoid stripped threads during installation, make sure your screw has a comparable strength rating.

Steel—Best for dry environments since moisture will cause these nuts to rust.

Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.

	Wd.	Ht.	Fastener Strength Grade/Class	Pkg. Qty.		Pkg.
Steel



	1"-8	1 1/2"	55/64"	SAE Grade 8	10	90499A847	000000

Extreme-Strength Steel

These nuts are about 20% stronger than high-strength steel nuts. To avoid stripped threads during installation, make sure your screw has a comparable strength rating.

Steel—Best for dry environments since moisture will cause these nuts to rust.

	Wd., mm	Ht., mm	Fastener Strength Grade/Class	Specs. Met	Pkg. Qty.		Pkg.
Steel



	M6 × 1 mm	10	5	ISO Class 12	DIN 934	50	94223A101	000000
	M8 × 1.25 mm	13	6.5	ISO Class 12	DIN 934	25	94223A102	00000
	M10 × 1.5 mm	17	8	ISO Class 12	DIN 934	10	94223A103	0000
	M12 × 1.75 mm	19	10	ISO Class 12	DIN 934	10	94223A104	00000
	M14 × 2 mm	22	11	ISO Class 12	DIN 934	1	94223A109	0000
	M16 × 2 mm	24	13	ISO Class 12	DIN 934	5	94223A105	00000
	M18 × 2.5 mm	27	15	ISO Class 12	DIN 934	1	94223A110	0000
	M20 × 2.5 mm	30	16	ISO Class 12	DIN 934	5	94223A106	00000
	M24 × 3 mm	36	19	ISO Class 12	DIN 934	1	94223A107	0000
	M27 × 3 mm	41	22	ISO Class 12	DIN 934	1	94223A111	00000


	M30 × 3.5 mm	46	24	ISO Class 12	DIN 934	1	94223A108	00000
	M33 × 3.5 mm	50	26	ISO Class 12	DIN 934	1	94223A112	00000
	M36 × 4 mm	55	29	ISO Class 12	DIN 934	1	94223A113	00000
	M39 × 4 mm	60	31	ISO Class 12	DIN 934	1	94223A114	00000
	M42 × 4.5 mm	65	34	ISO Class 12	DIN 934	1	94223A115	00000
	M45 × 4.5 mm	70	36	ISO Class 12	DIN 934	1	94223A116	00000
	M48 × 5 mm	75	38	ISO Class 12	DIN 934	1	94223A117	00000

Low-Strength Steel

Rated Grade 2, Class 6, or lower, these nuts are about half as strong as medium-strength nuts. They are suitable for light duty fastening applications, such as securing access panels. Use them with screws that have a similar strength rating to avoid stripping threads during installation.

Steel—Best for dry environments since moisture will cause these nuts to rust.

	Thread Size	Wd.	Ht.	Fastener Strength Grade/Class	Specs. Met	Pkg. Qty.		Pkg.
Steel



		1/4"-20	7/16"	7/32"	SAE Grade 2	ASME B18.2.2	100	90490A029	00000
		1/4"-28	7/16"	7/32"	SAE Grade 2	ASME B18.2.2	100	90490A205	0000
		5/16"-18	1/2"	17/64"	SAE Grade 2	ASME B18.2.2	100	90490A030	0000
		5/16"-24	1/2"	17/64"	SAE Grade 2	ASME B18.2.2	100	90490A210	0000
		3/8"-16	9/16"	21/64"	SAE Grade 2	ASME B18.2.2	100	90490A031	00000
		3/8"-24	9/16"	21/64"	SAE Grade 2	ASME B18.2.2	100	90490A215	00000
		7/16"-14	11/16"	3/8"	SAE Grade 2	ASME B18.2.2	100	90490A032	00000
		7/16"-20	11/16"	3/8"	SAE Grade 2	ASME B18.2.2	100	90490A220	00000
		1/2"-13	3/4"	7/16"	SAE Grade 2	ASME B18.2.2	100	90490A033	00000
		1/2"-20	3/4"	7/16"	SAE Grade 2	ASME B18.2.2	100	90490A225	00000


		9/16"-12	7/8"	31/64"	SAE Grade 2	ASME B18.2.2	50	90490A034	00000
		9/16"-18	7/8"	31/64"	SAE Grade 2	ASME B18.2.2	50	90490A230	00000
		5/8"-11	15/16"	35/64"	SAE Grade 2	ASME B18.2.2	50	90490A035	00000
		5/8"-18	15/16"	35/64"	SAE Grade 2	ASME B18.2.2	50	90490A235	00000
		3/4"-10	1 1/8"	41/64"	SAE Grade 2	ASME B18.2.2	25	90490A436	00000
		3/4"-16	1 1/8"	41/64"	SAE Grade 2	ASME B18.2.2	25	90490A240	00000
		7/8"-9	1 5/16"	3/4"	SAE Grade 2	ASME B18.2.2	25	90490A037	00000
		7/8"-14	1 5/16"	3/4"	SAE Grade 2	ASME B18.2.2	10	90490A245	00000
		1"-8	1 1/2"	55/64"	SAE Grade 2	ASME B18.2.2	10	90490A438	00000
		1"-12	1 1/2"	55/64"	SAE Grade 2	ASME B18.2.2	10	90490A250	00000


		1"-14	1 1/2"	55/64"	SAE Grade 2	ASME B18.2.2	10	90490A255	00000
		1 1/8"-7	1 11/16"	31/32"	SAE Grade 2	ASME B18.2.2	10	90490A439	00000
		1 1/8"-12	1 11/16"	31/32"	SAE Grade 2	ASME B18.2.2	10	90490A258	00000
		1 1/4"-7	1 7/8"	1 1/16"	SAE Grade 2	ASME B18.2.2	5	90490A440	00000
		1 1/4"-12	1 7/8"	1 1/16"	SAE Grade 2	ASME B18.2.2	5	90490A260	00000
		1 3/8"-6	2 1/16"	1 11/64"	SAE Grade 2	ASME B18.2.2	1	90490A442	0000
		1 3/8"-12	2 1/16"	1 11/64"	SAE Grade 2	ASME B18.2.2	1	90490A263	0000
		1 1/2"-6	2 1/4"	1 9/32"	SAE Grade 2	ASME B18.2.2	1	90490A441	0000
		1 1/2"-12	2 1/4"	1 9/32"	SAE Grade 2	ASME B18.2.2	1	90490A265	0000
		1 5/8"-5 1/2	2 7/16"	1 25/64"	SAE Grade 2	ASME B18.2.2	1	90490A061	0000


		1 5/8"-12	2 7/16"	1 25/64"	SAE Grade 2	ASME B18.2.2	1	90490A266	0000
		1 3/4"-5	2 5/8"	1 1/2"	SAE Grade 2	ASME B18.2.2	1	90490A044	00000
		1 3/4"-12	2 5/8"	1 1/2"	SAE Grade 2	ASME B18.2.2	1	90490A268	0000
		1 7/8"-5	2 13/16"	1 39/64"	SAE Grade 2	ASME B18.2.2	1	90490A065	00000
		1 7/8"-12	2 13/16"	1 39/64"	SAE Grade 2	ASME B18.2.2	1	90490A269	00000
		2"-12	3"	1 23/32"	SAE Grade 2	ASME B18.2.2	1	90490A270	00000
		2 1/4"-4 1/2	3 3/8"	1 15/16"	SAE Grade 2	ASME B18.2.2	1	90490A048	00000
		2 1/4"-12	3 3/8"	1 15/16"	SAE Grade 2	ASME B18.2.2	1	90490A273	00000
		2 1/2"-4	3 3/4"	2 5/32"	SAE Grade 2	ASME B18.2.2	1	90490A051	00000
		2 1/2"-12	3 3/4"	2 5/32"	SAE Grade 2	ASME B18.2.2	1	90490A275	00000


		2 3/4"-4	4 1/8"	2 3/8"	SAE Grade 2	ASME B18.2.2	1	90490A053	00000
		3"-4	4 1/2"	2 19/32"	SAE Grade 2	ASME B18.2.2	1	90490A055	00000
		3"-12	4 1/2"	2 19/32"	SAE Grade 2	ASME B18.2.2	1	90490A280	000000
		3 1/2"-4	5 3/8"	3 1/2"	SAE Grade 2	ASME B18.2.2	1	90490A310	000000
		M2 × 0.4 mm	4 mm	1.6 mm	—	DIN 934	100	90592A004	0000
		M2.5 × 0.45 mm	5 mm	2 mm	—	DIN 934	100	90592A006	0000
		M2.6 × 0.45 mm	5 mm	2 mm	—	DIN 934	100	90592A008	0000
		M3 × 0.5 mm	5.5 mm	2.4 mm	—	DIN 934	100	90592A009	0000
		M3.5 × 0.6 mm	6 mm	2.8 mm	—	DIN 934	100	90592A010	0000
		M4 × 0.7 mm	7 mm	3.2 mm	—	DIN 934	100	90592A011	0000


		M5 × 0.8 mm	8 mm	4 mm	—	DIN 934	100	90592A012	0000
M8 × 1.25 mm		13 mm	6.5 mm	—	DIN 934	1	95505A711	0000
M10 × 1.5 mm	17 mm	8 mm	—	DIN 934	1	95505A712	0000
M12 × 1.75 mm	19 mm	10 mm	—	DIN 934	1	95505A713	0000
M16 × 2 mm	24 mm	13 mm	—	DIN 934	1	95505A715	00000
M20 × 2.5 mm	30 mm	16 mm	—	DIN 934	1	95505A716	00000
M24 × 3 mm	36 mm	19 mm	—	DIN 934	1	95505A717	00000

Corrosion-Resistant Stainless Steel

18-8 Stainless Steel—The choice for wet and outdoor environments, these nuts resist rust. However, they won't hold up to the harsh chemicals that 316 stainless steel can.

Super-Corrosion-Resistant 316 Stainless Steel—Superior to 18-8 stainless steel, these nuts won't degrade when exposed to harsh weather, salt water, and most chemicals.

	Thread Size	Wd.	Ht.	Specs. Met	Pkg. Qty.		Pkg.
18-8 Stainless Steel



		0000-160	1/16"	1/32"	—	1	90001A201	000000
		000-120	5/64"	1/32"	—	5	90001A302	00000
		00-90	5/64"	3/64"	—	5	90001A403	00000
		0-80	5/32"	3/64"	—	100	91841A115	0000
		1-64	5/32"	3/64"	—	100	91841A038	0000
		1-72	5/32"	3/64"	—	100	91841A125	0000
		2-56	3/16"	1/16"	—	100	91841A003	0000
		2-64	3/16"	1/16"	—	100	91841A135	0000
		3-48	3/16"	1/16"	—	100	91841A004	0000
		3-56	3/16"	1/16"	—	100	91841A145	0000


		4-40	1/4"	3/32"	—	100	91841A005	0000
		4-48	1/4"	3/32"	—	100	91841A155	0000
		5-40	5/16"	7/64"	—	100	91841A006	0000
		5-44	5/16"	7/64"	—	100	91841A165	0000
		6-32	5/16"	7/64"	—	100	91841A007	0000
		6-40	5/16"	7/64"	—	100	91841A175	0000
		8-32	11/32"	1/8"	—	100	91841A009	0000
		8-36	11/32"	1/8"	—	100	91841A185	00000
		10-24	3/8"	1/8"	—	100	91841A011	0000
		10-32	3/8"	1/8"	—	100	91841A195	0000


		12-24	7/16"	5/32"	—	100	91841A013	0000
		12-28	7/16"	5/32"	—	100	91841A205	00000
		1/4"-20	7/16"	3/16"	—	100	91841A029	0000
		1/4"-20	7/16"	7/32"	—	100	91845A029	0000
		1/4"-20	7/16"	7/32"	ASTM F594	50	92673A113	0000
		1/4"-28	7/16"	3/16"	—	100	91841A215	00000
		1/4"-28	7/16"	7/32"	—	100	91845A105	0000
		1/4"-28	7/16"	7/32"	ASTM F594	50	92673A116	0000
		1/4"-32	7/16"	7/32"	—	1	95621A100	0000
		5/16"-18	1/2"	17/64"	—	100	91845A030	0000


		5/16"-18	1/2"	17/64"	ASTM F594	50	92673A119	0000
		5/16"-18	9/16"	7/32"	—	50	91841A030	0000
		5/16"-24	1/2"	17/64"	—	100	91845A115	0000
		5/16"-24	1/2"	17/64"	ASTM F594	50	92673A122	0000
		5/16"-32	1/2"	17/64"	—	1	95621A200	0000
		3/8"-16	9/16"	21/64"	—	100	91845A031	0000
		3/8"-16	9/16"	21/64"	ASTM F594	25	92673A125	0000
		3/8"-16	5/8"	1/4"	—	25	91841A035	0000
		3/8"-24	9/16"	21/64"	—	50	91845A125	0000
		3/8"-24	9/16"	21/64"	ASTM F594	25	92673A128	0000


		3/8"-32	9/16"	21/64"	—	1	95621A300	0000
		7/16"-14	11/16"	3/8"	—	50	91845A300	0000
		7/16"-14	11/16"	3/8"	ASTM F594	10	92673A131	0000
		7/16"-20	11/16"	3/8"	—	50	91845A135	0000
		7/16"-20	11/16"	3/8"	ASTM F594	10	92673A134	0000
		7/16"-28	11/16"	3/8"	—	1	95621A400	0000
		1/2"-13	3/4"	7/16"	—	25	91845A310	0000
		1/2"-13	3/4"	7/16"	ASTM F594	10	92673A137	0000
		1/2"-20	3/4"	7/16"	—	25	91845A145	0000
		1/2"-20	3/4"	7/16"	ASTM F594	10	92673A141	0000


		1/2"-28	3/4"	7/16"	—	1	91845A340	00000
9/16"-12		7/8"	31/64"	—	10	91845A315	0000
9/16"-12	7/8"	31/64"	ASTM F594	10	92673A199	0000
9/16"-18	7/8"	31/64"	—	10	91845A320	0000
5/8"-11	15/16"	35/64"	—	10	91845A325	0000
5/8"-11	15/16"	35/64"	ASTM F594	5	92673A144	0000
5/8"-18	15/16"	35/64"	—	10	91845A165	0000
5/8"-18	15/16"	35/64"	ASTM F594	5	92673A155	0000
5/8"-24	15/16"	35/64"	—	1	91845A345	00000
3/4"-10	1 1/8"	41/64"	—	10	91845A330	0000
3/4"-10	1 1/8"	41/64"	ASTM F594	5	92673A147	0000
3/4"-16	1 1/8"	41/64"	—	5	91845A175	0000
3/4"-16	1 1/8"	41/64"	ASTM F594	5	92673A157	0000
3/4"-20	1 1/8"	41/64"	—	1	91845A350	00000
7/8"-9	1 5/16"	3/4"	—	5	91845A335	0000
7/8"-9	1 5/16"	3/4"	ASTM F594	1	92673A150	0000
7/8"-14	1 5/16"	3/4"	—	5	91845A185	0000
7/8"-14	1 5/16"	3/4"	ASTM F594	1	92673A296	0000
7/8"-20	1 5/16"	3/4"	—	1	91845A355	00000
1"-8	1 1/2"	55/64"	—	5	91845A038	0000
1"-8	1 1/2"	55/64"	ASTM F594	1	92673A153	0000
1"-12	1 1/2"	55/64"	—	1	91845A203	0000
1"-12	1 1/2"	55/64"	ASTM F594	1	92673A331	0000
1"-14	1 1/2"	55/64"	—	1	91845A205	0000
1"-14	1 1/2"	55/64"	ASTM F594	1	92673A373	0000
1 1/8"-7	1 11/16"	31/32"	—	1	91845A039	0000
1 1/8"-7	1 11/16"	31/32"	ASTM F594	1	92673A382	0000
1 1/8"-12	1 11/16"	31/32"	—	1	91845A215	0000
1 1/4"-7	1 7/8"	1 1/16"	—	1	91845A040	0000
1 1/4"-7	1 7/8"	1 1/16"	ASTM F594	1	92673A438	0000
1 1/4"-12	1 7/8"	1 1/16"	—	1	91845A235	0000
1 3/8"-6	2 1/16"	1 11/64"	—	1	91845A042	0000
1 1/2"-6	2 1/4"	1 9/32"	—	1	91845A041	0000
1 1/2"-6	2 1/4"	1 9/32"	ASTM F594	1	92673A857	00000
1 1/2"-12	2 1/4"	1 9/32"	—	1	91845A265	0000
1 3/4"-5	2 5/8"	1 1/2"	—	1	91845A044	00000
2"-4 1/2	3"	1 23/32"	—	1	91845A045	00000
M1 × 0.25 mm	2.5 mm	0.8 mm	DIN 934	5	91828A003	00000
M1.2 × 0.25 mm	3 mm	1 mm	DIN 934	5	91828A004	0000
M1.4 × 0.3 mm	3 mm	1.2 mm	DIN 934	1	91828A005	0000
M1.6 × 0.35 mm	3.2 mm	1.3 mm	DIN 934	25	91828A006	00000
M2 × 0.4 mm	4 mm	1.6 mm	DIN 934	100	91828A111	0000
M2.5 × 0.45 mm	5 mm	2 mm	DIN 934	100	91828A113	0000
M3 × 0.5 mm	5.5 mm	2.4 mm	DIN 934	100	91828A211	0000
M3.5 × 0.6 mm	6 mm	2.8 mm	DIN 934	100	91828A220	0000
M4 × 0.7 mm	7 mm	3.2 mm	DIN 934	100	91828A231	0000
M5 × 0.8 mm	8 mm	4 mm	DIN 934	100	91828A241	0000
M6 × 1 mm	10 mm	5 mm	DIN 934	100	91828A251	00000
M7 × 1 mm	11 mm	5.5 mm	DIN 934	25	91828A255	0000
M8 × 1 mm	13 mm	6.5 mm	DIN 934	10	93850A320	0000
M8 × 1.25 mm	13 mm	6.5 mm	DIN 934	50	91828A410	00000
M10 × 1 mm	17 mm	8 mm	DIN 934	10	93850A330	00000
M10 × 1.25 mm	17 mm	8 mm	DIN 934	5	93850A335	00000
M10 × 1.5 mm	17 mm	8 mm	DIN 934	25	91828A415	00000
M12 × 1 mm	19 mm	10 mm	DIN 934	5	93850A405	00000
M12 × 1.25 mm	19 mm	10 mm	DIN 934	5	93850A337	00000
M12 × 1.5 mm	19 mm	10 mm	DIN 934	5	93850A340	00000
M12 × 1.75 mm	19 mm	10 mm	DIN 934	25	91828A420	00000
M14 × 1.5 mm	22 mm	11 mm	DIN 934	1	93850A350	0000
M14 × 2 mm	22 mm	11 mm	DIN 934	10	91828A425	00000
M16 × 1.5 mm	24 mm	13 mm	DIN 934	1	93850A360	0000
M16 × 2 mm	24 mm	13 mm	DIN 934	10	91828A430	00000
M18 × 1.5 mm	27 mm	15 mm	DIN 934	1	93850A365	0000
M18 × 2.5 mm	27 mm	15 mm	DIN 934	5	91828A435	00000
M20 × 1.5 mm	30 mm	16 mm	DIN 934	1	93850A370	0000
M20 × 2 mm	30 mm	14.3 mm	DIN 934	1	93850A135	00000
M20 × 2.5 mm	30 mm	16 mm	DIN 934	5	91828A440	00000
M22 × 1.5 mm	32 mm	18 mm	DIN 934	1	93850A375	0000
M22 × 2.5 mm	32 mm	18 mm	DIN 934	1	91828A442	0000
M24 × 1.5 mm	36 mm	19 mm	DIN 934	1	93850A380	0000
M24 × 2 mm	36 mm	19 mm	DIN 934	1	93850A410	00000
M24 × 3 mm	36 mm	19 mm	DIN 934	1	91828A316	0000
M27 × 2 mm	41 mm	20.7 mm	DIN 934	1	93850A136	00000
M27 × 3 mm	41 mm	22 mm	DIN 934	1	91828A318	0000
M30 × 1.5 mm	46 mm	24 mm	DIN 934	1	93850A390	00000
M30 × 2 mm	46 mm	22.7 mm	DIN 934	1	93850A137	00000
M30 × 3.5 mm	46 mm	24 mm	DIN 934	1	91828A445	00000
M33 × 1.5 mm	50 mm	24.7 mm	DIN 934	1	93850A141	00000
M33 × 3.5 mm	50 mm	24.7 mm	DIN 934	1	91828A112	00000
M36 × 1.5 mm	55 mm	29 mm	DIN 934	1	93850A400	00000
M36 × 3 mm	55 mm	27.4 mm	DIN 934	1	93850A142	00000
M36 × 4 mm	55 mm	29 mm	DIN 934	1	91828A450	00000
M42 × 4.5 mm	65 mm	34 mm	DIN 934	1	91828A465	00000
M48 × 5 mm	75 mm	38 mm	DIN 934	1	91828A480	00000

Super-Corrosion-Resistant 316 Stainless Steel



		4-40	1/4"	3/32"	—	100	90257A005	0000
		6-32	5/16"	7/64"	—	100	90257A007	0000
		8-32	11/32"	1/8"	—	100	90257A009	0000
		10-24	3/8"	1/8"	—	100	90257A011	0000
		10-32	3/8"	1/8"	—	100	90257A411	0000
		12-24	7/16"	5/32"	—	50	90257A038	0000
		1/4"-20	7/16"	3/16"	—	25	90257A029	0000
		1/4"-20	7/16"	7/32"	—	100	94804A029	0000
		1/4"-20	7/16"	7/32"	ASTM F594	50	94819A043	0000
		1/4"-28	7/16"	7/32"	—	50	94804A305	0000


		1/4"-28	7/16"	7/32"	ASTM F594	50	94819A100	0000
		5/16"-18	1/2"	17/64"	—	50	94804A030	0000
		5/16"-18	1/2"	17/64"	ASTM F594	25	94819A046	0000
		5/16"-24	1/2"	17/64"	—	50	94804A315	0000
		5/16"-24	1/2"	17/64"	ASTM F594	25	94819A115	0000
		3/8"-16	9/16"	21/64"	—	50	94804A320	0000
		3/8"-16	9/16"	21/64"	ASTM F594	25	94819A049	0000
		3/8"-16	5/8"	1/4"	—	10	90257A063	0000
		3/8"-24	9/16"	21/64"	—	25	94804A325	0000
		3/8"-24	9/16"	21/64"	ASTM F594	25	94819A134	0000


		7/16"-14	11/16"	3/8"	—	25	94804A330	0000
		7/16"-14	11/16"	3/8"	ASTM F594	10	94819A052	0000
		7/16"-20	11/16"	3/8"	—	10	94804A335	0000
		7/16"-20	11/16"	3/8"	ASTM F594	10	94819A148	0000
		1/2"-13	3/4"	7/16"	—	10	94804A340	0000
		1/2"-13	3/4"	7/16"	ASTM F594	5	94819A055	0000
		1/2"-20	3/4"	7/16"	—	10	94804A345	0000
		1/2"-20	3/4"	7/16"	ASTM F594	5	94819A149	0000
		9/16"-12	7/8"	31/64"	—	5	94804A348	0000
		9/16"-12	7/8"	31/64"	ASTM F594	5	94819A156	0000


		9/16"-18	7/8"	31/64"	—	5	94804A349	0000
		5/8"-11	15/16"	35/64"	—	10	94804A351	0000
		5/8"-11	15/16"	35/64"	ASTM F594	5	94819A058	0000
		5/8"-18	15/16"	35/64"	—	5	94804A355	0000
		5/8"-18	15/16"	35/64"	ASTM F594	5	94819A172	0000
		3/4"-10	1 1/8"	41/64"	—	5	94804A360	0000
		3/4"-10	1 1/8"	41/64"	ASTM F594	1	94819A061	0000
		3/4"-16	1 1/8"	41/64"	—	5	94804A365	0000
		3/4"-16	1 1/8"	41/64"	ASTM F594	1	94819A180	0000
		7/8"-9	1 5/16"	3/4"	—	1	94804A370	0000


		7/8"-9	1 5/16"	3/4"	ASTM F594	1	94819A064	0000
		7/8"-14	1 5/16"	3/4"	—	1	94804A375	0000
		7/8"-14	1 5/16"	3/4"	ASTM F594	1	94819A239	0000
		1"-8	1 1/2"	55/64"	—	1	94804A038	0000
		1"-8	1 1/2"	55/64"	ASTM F594	1	94819A067	0000
		1"-12	1 1/2"	55/64"	—	1	94804A152	0000
		1"-12	1 1/2"	55/64"	ASTM F594	1	94819A304	00000
		1"-14	1 1/2"	55/64"	—	1	94804A156	0000
		1"-14	1 1/2"	55/64"	ASTM F594	1	94819A408	0000
		1 1/8"-7	1 11/16"	31/32"	—	1	94804A039	0000


		1 1/8"-7	1 11/16"	31/32"	ASTM F594	1	94819A409	0000
1 1/4"-7		1 7/8"	1 1/16"	—	1	94804A040	0000
1 1/4"-7	1 7/8"	1 1/16"	ASTM F594	1	94819A425	00000
1 3/8"-6	2 1/16"	1 11/64"	—	1	94804A169	0000
1 1/2"-6	2 1/4"	1 9/32"	—	1	94804A041	0000
1 1/2"-6	2 1/4"	1 9/32"	ASTM F594	1	94819A854	00000
1 3/4"-5	2 5/8"	1 1/2"	—	1	94804A055	00000
2"-4 1/2	3"	1 23/32"	—	1	94804A065	00000
M1 × 0.25 mm	2.5 mm	0.8 mm	DIN 934	1	94150A112	0000
M1.2 × 0.25 mm	3 mm	1 mm	DIN 934	5	94150A113	00000
M1.4 × 0.3 mm	3 mm	1.2 mm	DIN 934	5	94150A114	00000
M1.6 × 0.35 mm	3.2 mm	1.3 mm	DIN 934	10	94150A115	0000
M2 × 0.4 mm	4 mm	1.6 mm	DIN 934	50	94150A305	0000
M2.5 × 0.45 mm	5 mm	2 mm	DIN 934	50	94150A310	0000
M3 × 0.5 mm	5.5 mm	2.4 mm	DIN 934	50	94150A325	0000
M3.5 × 0.6 mm	6 mm	2.8 mm	DIN 934	50	94150A330	0000
M4 × 0.7 mm	7 mm	3.2 mm	DIN 934	50	94150A335	0000
M5 × 0.8 mm	8 mm	4 mm	DIN 934	50	94150A340	0000
M6 × 1 mm	10 mm	5 mm	DIN 934	50	94150A345	00000
M7 × 1 mm	11 mm	5.5 mm	DIN 934	25	94150A116	00000
M8 × 1.25 mm	13 mm	6.5 mm	DIN 934	50	94150A355	00000
M10 × 1.5 mm	17 mm	8 mm	DIN 934	10	94150A358	00000
M12 × 1.75 mm	19 mm	10 mm	DIN 934	5	94150A360	0000
M14 × 2 mm	22 mm	11 mm	DIN 934	5	94150A363	00000
M16 × 2 mm	24 mm	13 mm	DIN 934	5	94150A365	00000
M18 × 2.5 mm	27 mm	15 mm	DIN 934	1	94150A368	0000
M20 × 2.5 mm	30 mm	16 mm	DIN 934	1	94150A370	0000
M22 × 2.5 mm	32 mm	18 mm	DIN 934	1	94150A372	0000
M24 × 3 mm	36 mm	19 mm	DIN 934	1	94150A373	0000
M27 × 3 mm	41 mm	20.7 mm	DIN 934	1	94150A111	0000
M30 × 3.5 mm	46 mm	24 mm	DIN 934	1	94150A376	00000
M33 × 3.5 mm	50 mm	26 mm	DIN 934	1	94150A117	00000
M36 × 4 mm	55 mm	29 mm	DIN 934	1	94150A379	00000
M39 × 4 mm	60 mm	31 mm	DIN 934	1	94150A118	00000
M42 × 4.5 mm	65 mm	34 mm	DIN 934	1	94150A389	00000
M48 × 5 mm	75 mm	38 mm	DIN 934	1	94150A397	00000

Corrosion-Resistant Stainless Steel with Material Certificate

18-8 Stainless Steel—The choice for wet and outdoor environments, these nuts resist rust. However, they won't hold up to the harsh chemicals that 316 stainless steel can.

Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.

	Wd.	Ht.	Pkg. Qty.		Pkg.
18-8 Stainless Steel



	11/16"-24	1"	27/64"	1	95621A700	000000

Low-Strength Steel with Material Certificate

Steel—Best for dry environments since moisture will cause these nuts to rust.

Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.

	Wd., mm	Ht., mm	Specs. Met	Pkg. Qty.		Pkg.
Steel



	M14 × 2 mm	22	11	DIN 934	1	95505A714	00000
	M30 × 3.5 mm	46	24	DIN 934	1	95505A718	00000
	M36 × 4 mm	55	29	DIN 934	1	95505A719	00000
	M42 × 4.5 mm	65	34	DIN 934	1	95505A721	00000
	M48 × 5 mm	75	38	DIN 934	1	95505A722	00000

Thin-Profile Hex Nuts

About half the height of standard-profile nuts, these fit in spaces with low clearance. You can also use them as jam nuts by threading them against another hex nut to hold it in place.

Medium-Strength Steel

These Grade 5 or Class 04 nuts are your go-to for fastening most machinery and equipment. To avoid stripped threads during installation, make sure your screw has a comparable strength rating.

Steel—Best for dry environments since moisture will cause these nuts to rust.

	Thread Size	Wd.	Ht.	Fastener Strength Grade/Class	Specs. Met	Pkg. Qty.		Pkg.
Steel



		1/4"-20	7/16"	5/32"	SAE Grade 5	ASME B18.2.2	100	94846A201	00000
		1/4"-28	7/16"	5/32"	SAE Grade 5	ASME B18.2.2	100	94846A202	0000
		5/16"-18	1/2"	3/16"	SAE Grade 5	ASME B18.2.2	50	94846A203	0000
		5/16"-24	1/2"	3/16"	SAE Grade 5	ASME B18.2.2	50	94846A204	0000
		3/8"-16	9/16"	7/32"	SAE Grade 5	ASME B18.2.2	50	94846A205	0000
		3/8"-24	9/16"	7/32"	SAE Grade 5	ASME B18.2.2	50	94846A206	0000
		7/16"-14	11/16"	1/4"	SAE Grade 5	ASME B18.2.2	50	94846A207	0000
		7/16"-20	11/16"	1/4"	SAE Grade 5	ASME B18.2.2	50	94846A208	0000
		1/2"-13	3/4"	5/16"	SAE Grade 5	ASME B18.2.2	25	94846A209	0000
		1/2"-20	3/4"	5/16"	SAE Grade 5	ASME B18.2.2	25	94846A210	0000


		9/16"-12	7/8"	5/16"	SAE Grade 5	ASME B18.2.2	25	94846A211	00000
		9/16"-18	7/8"	5/16"	SAE Grade 5	ASME B18.2.2	25	94846A212	0000
		5/8"-11	15/16"	3/8"	SAE Grade 5	ASME B18.2.2	10	94846A213	0000
		5/8"-18	15/16"	3/8"	SAE Grade 5	ASME B18.2.2	10	94846A214	0000
		3/4"-10	1 1/8"	27/64"	SAE Grade 5	ASME B18.2.2	10	94846A215	0000
		3/4"-16	1 1/8"	27/64"	SAE Grade 5	ASME B18.2.2	10	94846A216	0000
		7/8"-9	1 5/16"	31/64"	SAE Grade 5	ASME B18.2.2	5	94846A217	0000
		7/8"-14	1 5/16"	31/64"	SAE Grade 5	ASME B18.2.2	5	94846A218	0000
		1"-8	1 1/2"	35/64"	SAE Grade 5	ASME B18.2.2	5	94846A219	00000
		1"-12	1 1/2"	35/64"	SAE Grade 5	ASME B18.2.2	1	94846A220	0000


		1"-14	1 1/2"	35/64"	SAE Grade 5	ASME B18.2.2	1	94846A221	0000
		1 1/8"-7	1 11/16"	39/64"	SAE Grade 5	ASME B18.2.2	1	94846A222	0000
		1 1/8"-12	1 11/16"	39/64"	SAE Grade 5	ASME B18.2.2	1	94846A223	0000
		1 1/4"-7	1 7/8"	23/32"	SAE Grade 5	ASME B18.2.2	1	94846A224	0000
		1 1/4"-12	1 7/8"	23/32"	SAE Grade 5	ASME B18.2.2	1	94846A225	0000
		1 3/8"-12	2 1/16"	25/32"	SAE Grade 5	ASME B18.2.2	1	94846A226	00000
		1 1/2"-12	2 1/4"	27/32"	SAE Grade 5	ASME B18.2.2	1	94846A227	0000
		M2 × 0.4 mm	4 mm	1.2 mm	—	DIN 439B, ISO 4035	100	90370A201	0000
		M2.5 × 0.45 mm	5 mm	1.6 mm	—	DIN 439B, ISO 4035	100	90370A202	0000
		M3 × 0.5 mm	5.5 mm	1.8 mm	—	DIN 439B, ISO 4035	100	90370A203	0000


		M4 × 0.7 mm	7 mm	2.2 mm	ISO Class 04	DIN 439B, ISO 4035	100	94168A111	0000
		M5 × 0.8 mm	8 mm	2.7 mm	ISO Class 04	DIN 439B, ISO 4035	100	94168A112	0000
		M6 × 1 mm	10 mm	3.2 mm	ISO Class 04	DIN 439B, ISO 4035	100	94168A113	0000
		M8 × 1 mm	13 mm	4 mm	ISO Class 04	DIN 439B, ISO 4035	50	90326A208	00000
		M8 × 1 mm	13 mm	5 mm	—	DIN 936	50	90364A101	0000
		M8 × 1.25 mm	13 mm	4 mm	ISO Class 04	DIN 439B, ISO 4035	100	94168A114	0000
		M8 × 1.25 mm	13 mm	5 mm	—	DIN 936	50	90370A101	00000
		M10 × 1 mm	17 mm	6 mm	—	DIN 936	25	90364A103	00000
		M10 × 1.25 mm	17 mm	5 mm	ISO Class 04	DIN 439B, ISO 4035	50	90326A209	00000
		M10 × 1.25 mm	17 mm	6 mm	—	DIN 936	25	90364A102	00000


		M10 × 1.5 mm	17 mm	5 mm	ISO Class 04	DIN 439B, ISO 4035	100	94168A115	00000
		M10 × 1.5 mm	17 mm	6 mm	—	DIN 936	25	90370A102	00000
		M12 × 1.25 mm	19 mm	7 mm	—	DIN 936	25	90364A105	00000
		M12 × 1.5 mm	19 mm	6 mm	ISO Class 04	DIN 439B, ISO 4035	25	90326A211	00000
		M12 × 1.5 mm	19 mm	7 mm	—	DIN 936	25	90364A104	00000
		M12 × 1.75 mm	19 mm	6 mm	ISO Class 04	DIN 439B, ISO 4035	50	94168A116	0000
		M12 × 1.75 mm	19 mm	7 mm	—	DIN 936	25	90370A103	00000
		M14 × 1.5 mm	22 mm	7 mm	ISO Class 04	DIN 439B, ISO 4035	50	90326A212	00000
		M14 × 1.5 mm	22 mm	8 mm	—	DIN 936	10	90364A106	0000
		M14 × 2 mm	22 mm	7 mm	—	DIN 439B, ISO 4035	10	90370A211	0000


		M14 × 2 mm	22 mm	8 mm	—	DIN 936	25	90370A104	00000
M16 × 1.5 mm		24 mm	8 mm	—	DIN 936	10	90370A106	0000
M16 × 1.5 mm	24 mm	8 mm	ISO Class 04	DIN 439B, ISO 4035	25	90326A213	00000
M16 × 2 mm	24 mm	8 mm	—	DIN 936	10	90370A105	0000
M16 × 2 mm	24 mm	8 mm	ISO Class 04	DIN 439B, ISO 4035	25	94168A118	0000
M18 × 1.5 mm	27 mm	9 mm	—	DIN 936	10	90364A107	0000
M18 × 1.5 mm	27 mm	9 mm	ISO Class 04	DIN 439B, ISO 4035	10	90326A214	0000
M18 × 2.5 mm	27 mm	9 mm	—	DIN 936	10	90370A107	00000
M20 × 1.5 mm	30 mm	9 mm	—	DIN 936	10	90364A109	00000
M20 × 1.5 mm	30 mm	10 mm	ISO Class 04	DIN 439B, ISO 4035	10	90326A215	0000
M20 × 2 mm	30 mm	9 mm	—	DIN 936	10	90364A108	00000
M20 × 2.5 mm	30 mm	9 mm	—	DIN 936	10	90370A108	00000
M20 × 2.5 mm	30 mm	10 mm	ISO Class 04	DIN 439B, ISO 4035	10	94168A119	0000
M22 × 1.5 mm	32 mm	10 mm	—	DIN 936	10	90364A111	00000
M22 × 1.5 mm	32 mm	11 mm	ISO Class 04	DIN 439B, ISO 4035	10	90326A216	0000
M22 × 2.5 mm	32 mm	10 mm	—	DIN 936	5	90370A109	00000
M22 × 2.5 mm	32 mm	11 mm	—	DIN 439B, ISO 4035	1	90370A214	0000
M24 × 1.5 mm	36 mm	10 mm	—	DIN 936	1	90364A113	0000
M24 × 1.5 mm	36 mm	12 mm	ISO Class 04	DIN 439B, ISO 4035	5	90326A217	00000
M24 × 2 mm	36 mm	10 mm	—	DIN 936	1	90364A112	0000
M24 × 2 mm	36 mm	12 mm	ISO Class 04	DIN 439B, ISO 4035	5	90326A218	00000
M24 × 3 mm	36 mm	10 mm	—	DIN 936	1	90370A111	0000
M24 × 3 mm	36 mm	12 mm	ISO Class 04	DIN 439B, ISO 4035	5	94168A122	0000
M27 × 1.5 mm	41 mm	12 mm	—	DIN 936	1	90364A115	0000
M27 × 1.5 mm	41 mm	13.5 mm	ISO Class 04	DIN 439B, ISO 4035	1	90326A219	00000
M27 × 2 mm	41 mm	12 mm	—	DIN 936	1	90364A114	0000
M27 × 2 mm	41 mm	13.5 mm	ISO Class 04	DIN 439B, ISO 4035	1	90326A221	0000
M27 × 3 mm	41 mm	12 mm	—	DIN 936	1	90370A112	0000
M30 × 1.5 mm	46 mm	12 mm	—	DIN 936	1	90364A117	0000
M30 × 2 mm	46 mm	12 mm	—	DIN 936	1	90364A116	0000
M30 × 2 mm	46 mm	15 mm	ISO Class 04	DIN 439B, ISO 4035	1	90326A222	0000
M30 × 3.5 mm	46 mm	12 mm	—	DIN 936	1	90370A113	0000
M30 × 3.5 mm	46 mm	15 mm	—	DIN 439B, ISO 4035	1	90370A216	0000
M33 × 1.5 mm	50 mm	14 mm	—	DIN 936	1	90364A119	00000
M33 × 2 mm	50 mm	14 mm	—	DIN 936	1	90364A118	0000
M33 × 2 mm	50 mm	16.5 mm	ISO Class 04	DIN 439B, ISO 4035	1	90326A223	00000
M33 × 3.5 mm	50 mm	14 mm	—	DIN 936	1	90370A114	00000
M36 × 1.5 mm	55 mm	14 mm	—	DIN 936	1	90364A123	00000
M36 × 2 mm	55 mm	14 mm	—	DIN 936	1	90364A122	00000
M36 × 3 mm	55 mm	14 mm	—	DIN 936	1	90364A121	00000
M36 × 3 mm	55 mm	18 mm	ISO Class 04	DIN 439B, ISO 4035	1	90326A224	00000
M36 × 4 mm	55 mm	14 mm	—	DIN 936	1	90370A115	00000
M36 × 4 mm	55 mm	18 mm	ISO Class 04	DIN 439B, ISO 4035	1	94168A124	0000
M39 × 3 mm	60 mm	19.5 mm	ISO Class 04	DIN 439B, ISO 4035	1	90326A225	00000
M42 × 1.5 mm	65 mm	16 mm	—	DIN 936	1	90364A125	00000
M42 × 3 mm	65 mm	16 mm	—	DIN 936	1	90364A124	00000
M42 × 3 mm	65 mm	21 mm	ISO Class 04	DIN 439B, ISO 4035	1	90326A226	00000
M42 × 4.5 mm	65 mm	16 mm	—	DIN 936	1	90370A116	00000
M45 × 3 mm	70 mm	22.5 mm	ISO Class 04	DIN 439B, ISO 4035	1	90326A227	00000
M48 × 1.5 mm	75 mm	18 mm	—	DIN 936	1	90364A127	00000
M48 × 3 mm	75 mm	18 mm	—	DIN 936	1	90364A126	00000
M48 × 3 mm	75 mm	24 mm	ISO Class 04	DIN 439B, ISO 4035	1	90326A228	00000
M48 × 5 mm	75 mm	18 mm	—	DIN 936	1	90370A117	00000
M48 × 5 mm	75 mm	24 mm	ISO Class 04	DIN 439B, ISO 4035	1	94168A127	00000
M52 × 3 mm	80 mm	26 mm	ISO Class 04	DIN 439B, ISO 4035	1	90326A229	00000
M52 × 5 mm	80 mm	26 mm	ISO Class 04	DIN 439B, ISO 4035	1	94168A128	00000

High-Strength Steel

Steel—Best for dry environments since moisture will cause these nuts to rust.

	Wd.	Ht.	Fastener Strength Grade/Class	Specs. Met	Pkg. Qty.		Pkg.
Steel



	1/4"-20	7/16"	5/32"	SAE Grade 8	ASME B18.2.2	50	92052A110	00000
	1/4"-28	7/16"	5/32"	SAE Grade 8	ASME B18.2.2	50	92052A120	0000
	5/16"-18	1/2"	3/16"	SAE Grade 8	ASME B18.2.2	50	92052A130	00000
	5/16"-24	1/2"	3/16"	SAE Grade 8	ASME B18.2.2	50	92052A140	00000
	3/8"-16	9/16"	7/32"	SAE Grade 8	ASME B18.2.2	50	92052A150	00000
	3/8"-24	9/16"	7/32"	SAE Grade 8	ASME B18.2.2	50	92052A160	00000
	7/16"-14	11/16"	1/4"	SAE Grade 8	ASME B18.2.2	25	92052A170	00000
	7/16"-20	11/16"	1/4"	SAE Grade 8	ASME B18.2.2	25	92052A180	00000
	1/2"-13	3/4"	5/16"	SAE Grade 8	ASME B18.2.2	25	92052A190	00000
	1/2"-20	3/4"	5/16"	SAE Grade 8	ASME B18.2.2	10	92052A210	0000


	5/8"-11	15/16"	3/8"	SAE Grade 8	ASME B18.2.2	10	92052A220	00000
	5/8"-18	15/16"	3/8"	SAE Grade 8	ASME B18.2.2	10	92052A230	00000
	3/4"-10	1 1/8"	27/64"	SAE Grade 8	ASME B18.2.2	10	92052A240	00000
	3/4"-16	1 1/8"	27/64"	SAE Grade 8	ASME B18.2.2	10	92052A250	00000
	7/8"-9	1 5/16"	31/64"	SAE Grade 8	ASME B18.2.2	5	92052A260	00000
	7/8"-14	1 5/16"	31/64"	SAE Grade 8	ASME B18.2.2	5	92052A270	00000
	1"-8	1 1/2"	35/64"	SAE Grade 8	ASME B18.2.2	1	92052A280	0000
	1"-12	1 1/2"	35/64"	SAE Grade 8	ASME B18.2.2	1	92052A290	0000
	1"-14	1 1/2"	35/64"	SAE Grade 8	ASME B18.2.2	1	92052A310	0000
	1 1/8"-7	1 11/16"	39/64"	SAE Grade 8	ASME B18.2.2	1	92052A320	0000


	1 1/4"-12	1 7/8"	23/32"	SAE Grade 8	ASME B18.2.2	1	92052A330	00000
	1 3/8"-6	2 1/16"	25/32"	SAE Grade 8	ASME B18.2.2	1	92052A340	00000
	1 3/8"-12	2 1/16"	25/32"	SAE Grade 8	ASME B18.2.2	1	92052A350	00000
	1 1/2"-6	2 1/4"	27/32"	SAE Grade 8	ASME B18.2.2	1	92052A360	00000
	1 1/2"-12	2 1/4"	27/32"	SAE Grade 8	ASME B18.2.2	1	92052A370	00000
	1 3/4"-5	2 5/8"	31/32"	SAE Grade 8	ASME B18.2.2	1	92052A380	00000
	1 3/4"-12	2 5/8"	31/32"	SAE Grade 8	ASME B18.2.2	1	92052A390	00000
	2"-4 1/2	3"	1 3/32"	SAE Grade 8	ASME B18.2.2	1	92052A410	00000
	2"-12	3"	1 3/32"	SAE Grade 8	ASME B18.2.2	1	92052A420	00000

Low-Strength Steel

Steel—Best for dry environments since moisture will cause these nuts to rust.

	Wd.	Ht.	Fastener Strength Grade/Class	Pkg. Qty.		Pkg.
Steel



	1/4"-20	7/16"	5/32"	SAE Grade 2	100	90494A029	00000
	1/4"-28	7/16"	5/32"	SAE Grade 2	100	90494A229	0000
	5/16"-18	1/2"	3/16"	SAE Grade 2	100	90494A030	0000
	5/16"-24	1/2"	3/16"	SAE Grade 2	100	90494A230	0000
	3/8"-16	9/16"	7/32"	SAE Grade 2	100	90494A031	0000
	3/8"-24	9/16"	7/32"	SAE Grade 2	100	90494A231	0000
	7/16"-14	11/16"	1/4"	SAE Grade 2	100	90494A032	0000
	7/16"-20	11/16"	1/4"	SAE Grade 2	100	90494A232	0000
	1/2"-13	3/4"	5/16"	SAE Grade 2	100	90494A033	00000
	1/2"-20	3/4"	5/16"	SAE Grade 2	100	90494A233	00000


	9/16"-18	7/8"	5/16"	SAE Grade 2	100	90494A234	00000
	5/8"-11	15/16"	3/8"	SAE Grade 2	100	90494A035	00000
	5/8"-18	15/16"	3/8"	SAE Grade 2	100	90494A235	00000
	3/4"-10	1 1/8"	27/64"	SAE Grade 2	50	90494A136	00000
	3/4"-16	1 1/8"	27/64"	SAE Grade 2	50	90494A236	00000
	7/8"-9	1 5/16"	31/64"	SAE Grade 2	25	90494A137	00000
	7/8"-14	1 5/16"	31/64"	SAE Grade 2	25	90494A237	00000
	1"-8	1 1/2"	35/64"	SAE Grade 2	20	90494A138	00000
	1"-14	1 1/2"	35/64"	SAE Grade 2	10	90494A238	00000
	1 1/8"-7	1 11/16"	39/64"	SAE Grade 2	10	90494A139	00000


	1 1/8"-12	1 11/16"	39/64"	SAE Grade 2	10	90494A239	00000
	1 1/4"-7	1 7/8"	23/32"	SAE Grade 2	5	90494A140	00000
	1 1/4"-12	1 7/8"	23/32"	SAE Grade 2	5	90494A240	00000
	1 3/8"-12	2 1/16"	25/32"	SAE Grade 2	5	90494A141	00000
	1 1/2"-6	2 1/4"	27/32"	SAE Grade 2	1	90494A142	0000
	1 1/2"-12	2 1/4"	27/32"	SAE Grade 2	1	90494A241	0000
	1 5/8"-12	2 7/16"	29/32"	SAE Grade 2	1	90496A061	0000
	1 3/4"-5	2 5/8"	31/32"	SAE Grade 2	1	90496A063	0000
	1 3/4"-12	2 5/8"	31/32"	SAE Grade 2	1	90496A044	0000
	1 7/8"-12	2 13/16"	1 1/32"	SAE Grade 2	1	90496A065	0000


	2"-4 1/2	3"	1 3/32"	SAE Grade 2	1	90496A066	00000
	2"-12	3"	1 3/32"	SAE Grade 2	1	90496A046	00000
	2 1/4"-12	3 3/8"	1 7/32"	SAE Grade 2	1	90496A048	00000
	2 1/2"-4	3 3/4"	1 13/32"	SAE Grade 2	1	90496A068	00000
	2 1/2"-12	3 3/4"	1 13/32"	SAE Grade 2	1	90496A051	00000
	3"-12	4 1/2"	1 21/32"	SAE Grade 2	1	90496A055	00000

Corrosion-Resistant Stainless Steel

18-8 Stainless Steel—The choice for wet and outdoor environments, these nuts resist rust. However, they won't hold up to the harsh chemicals that 316 stainless steel can.

Super-Corrosion-Resistant 316 Stainless Steel—Superior to 18-8 stainless steel, these nuts won't degrade when exposed to harsh weather, salt water, and most chemicals.

	Thread Size	Wd.	Ht.	Specs. Met	Pkg. Qty.		Pkg.
18-8 Stainless Steel



		1/4"-20	7/16"	5/32"	—	100	91847A029	00000
		1/4"-28	7/16"	5/32"	—	100	91847A429	0000
		5/16"-18	1/2"	3/16"	—	100	91847A030	0000
		5/16"-24	1/2"	3/16"	—	100	91847A430	0000
		3/8"-16	9/16"	7/32"	—	100	91847A031	0000
		3/8"-24	9/16"	7/32"	—	100	91847A431	00000
		7/16"-14	11/16"	1/4"	—	50	91847A510	00000
		7/16"-20	11/16"	1/4"	—	50	91847A515	00000
		1/2"-13	3/4"	5/16"	—	25	91847A520	0000
		1/2"-20	3/4"	5/16"	—	25	91847A525	0000


		1/2"-28	3/4"	5/16"	—	1	91847A575	00000
		9/16"-12	7/8"	5/16"	—	20	91847A530	00000
		9/16"-18	7/8"	5/16"	—	10	91847A434	0000
		5/8"-11	15/16"	3/8"	—	10	91847A540	0000
		5/8"-18	15/16"	3/8"	—	10	91847A545	0000
		5/8"-24	15/16"	3/8"	—	1	95621A600	00000
		3/4"-10	1 1/8"	27/64"	—	10	91847A550	0000
		3/4"-16	1 1/8"	27/64"	—	10	91847A555	0000
		3/4"-20	1 1/8"	27/64"	—	1	91847A580	00000
		7/8"-9	1 5/16"	31/64"	—	5	91847A560	0000


		7/8"-14	1 5/16"	31/64"	—	5	91847A565	0000
		1"-8	1 1/2"	35/64"	—	1	91847A570	0000
		1"-12	1 1/2"	35/64"	—	1	91847A436	0000
		1"-14	1 1/2"	35/64"	—	1	91847A438	0000
		1 1/8"-7	1 11/16"	39/64"	—	1	91847A039	0000
		1 1/8"-12	1 11/16"	39/64"	—	1	91847A439	0000
		1 1/4"-7	1 7/8"	23/32"	—	1	91847A040	0000
		1 1/4"-12	1 7/8"	23/32"	—	1	91847A440	0000
		1 1/2"-6	2 1/4"	27/32"	—	1	91847A041	0000
		1 1/2"-12	2 1/4"	27/32"	—	1	91847A441	0000


		1 3/4"-5	2 5/8"	31/32"	—	1	91847A051	00000
		2"-4 1/2	3"	1 3/32"	—	1	91847A071	00000
		M1.6 × 0.35 mm	3.2 mm	1 mm	DIN 439B, ISO 4035	1	90710A145	0000
		M2 × 0.4 mm	4 mm	1.2 mm	DIN 439B, ISO 4035	50	90710A020	0000
		M2.5 × 0.45 mm	5 mm	1.6 mm	DIN 439B, ISO 4035	50	90710A025	0000
		M3 × 0.5 mm	5.5 mm	1.8 mm	DIN 439B, ISO 4035	100	90710A030	00000
		M4 × 0.7 mm	7 mm	2.2 mm	DIN 439B, ISO 4035	100	90710A035	0000
		M5 × 0.8 mm	8 mm	2.7 mm	DIN 439B, ISO 4035	100	90710A037	0000
		M6 × 1 mm	10 mm	3.2 mm	DIN 439B, ISO 4035	100	90710A038	0000
		M8 × 1 mm	13 mm	4 mm	DIN 439B, ISO 4035	25	91938A105	0000


		M8 × 1 mm	13 mm	5 mm	DIN 936	25	97013A111	00000
		M8 × 1.25 mm	13 mm	4 mm	DIN 439B, ISO 4035	50	90710A120	00000
		M10 × 1 mm	17 mm	5 mm	DIN 439B, ISO 4035	10	91938A110	0000
		M10 × 1 mm	17 mm	6 mm	DIN 936	10	97013A112	00000
		M10 × 1.25 mm	17 mm	5 mm	DIN 439B, ISO 4035	10	91938A115	0000
		M10 × 1.5 mm	17 mm	5 mm	DIN 439B, ISO 4035	25	90710A125	0000
		M10 × 1.5 mm	17 mm	6 mm	DIN 936	25	90381A101	00000
		M12 × 1 mm	19 mm	6 mm	DIN 439B, ISO 4035	10	91938A160	00000
		M12 × 1.25 mm	19 mm	6 mm	DIN 439B, ISO 4035	10	91938A120	0000
		M12 × 1.5 mm	19 mm	6 mm	DIN 439B, ISO 4035	10	91938A125	0000


		M12 × 1.5 mm	19 mm	7 mm	DIN 936	5	97013A114	0000
M12 × 1.75 mm		19 mm	6 mm	DIN 439B, ISO 4035	20	90710A130	0000
M12 × 1.75 mm	19 mm	7 mm	DIN 936	10	90381A102	00000
M14 × 1.5 mm	22 mm	7 mm	DIN 439B, ISO 4035	5	91938A130	0000
M14 × 1.5 mm	22 mm	8 mm	DIN 936	1	97013A115	0000
M14 × 2 mm	22 mm	7 mm	DIN 439B, ISO 4035	5	90710A135	0000
M14 × 2 mm	22 mm	8 mm	DIN 936	5	90381A103	0000
M16 × 1.5 mm	24 mm	8 mm	DIN 439B, ISO 4035	5	91938A135	00000
M16 × 1.5 mm	24 mm	8 mm	DIN 936	5	97013A116	00000
M16 × 2 mm	24 mm	8 mm	DIN 439B, ISO 4035	5	90710A140	0000
M16 × 2 mm	24 mm	8 mm	DIN 936	5	90381A104	00000
M18 × 1.5 mm	27 mm	9 mm	DIN 439B, ISO 4035	1	91938A165	0000
M18 × 1.5 mm	27 mm	9 mm	DIN 936	1	97013A117	0000
M18 × 2.5 mm	27 mm	9 mm	DIN 439B, ISO 4035	5	90710A150	00000
M18 × 2.5 mm	27 mm	9 mm	DIN 936	5	90381A105	00000
M20 × 1.5 mm	30 mm	9 mm	DIN 936	1	97013A113	0000
M20 × 1.5 mm	30 mm	10 mm	DIN 439B, ISO 4035	1	91938A145	0000
M20 × 2 mm	30 mm	10 mm	DIN 439B, ISO 4035	5	91938A187	00000
M20 × 2.5 mm	30 mm	9 mm	DIN 936	1	90381A106	0000
M20 × 2.5 mm	30 mm	10 mm	DIN 439B, ISO 4035	5	90710A045	00000
M22 × 1.5 mm	32 mm	10 mm	DIN 936	1	97013A118	0000
M22 × 1.5 mm	32 mm	11 mm	DIN 439B, ISO 4035	1	91938A170	00000
M22 × 2.5 mm	32 mm	11 mm	DIN 439B, ISO 4035	1	90710A155	00000
M24 × 1.5 mm	36 mm	10 mm	DIN 936	1	97013A119	00000
M24 × 1.5 mm	36 mm	12 mm	DIN 439B, ISO 4035	1	91938A155	0000
M24 × 2 mm	36 mm	12 mm	DIN 439B, ISO 4035	1	91938A175	00000
M24 × 3 mm	36 mm	10 mm	DIN 936	1	90381A108	0000
M24 × 3 mm	36 mm	12 mm	DIN 439B, ISO 4035	1	90710A047	0000
M27 × 1.5 mm	41 mm	12 mm	DIN 936	1	97013A121	00000
M27 × 3 mm	41 mm	12 mm	DIN 936	1	90381A109	00000
M30 × 1.5 mm	46 mm	12 mm	DIN 936	1	97013A122	00000
M30 × 1.5 mm	46 mm	15 mm	DIN 439B, ISO 4035	1	91938A180	00000
M30 × 2 mm	46 mm	15 mm	DIN 439B, ISO 4035	1	91938A189	00000
M30 × 3.5 mm	46 mm	12 mm	DIN 936	1	90381A111	00000
M30 × 3.5 mm	46 mm	15 mm	DIN 439B, ISO 4035	1	90710A050	00000
M33 × 3.5 mm	50 mm	14 mm	DIN 936	1	90381A112	00000
M36 × 1.5 mm	55 mm	14 mm	DIN 936	1	97013A123	00000
M36 × 1.5 mm	55 mm	18 mm	DIN 439B, ISO 4035	1	91938A188	00000
M36 × 4 mm	55 mm	14 mm	DIN 936	1	90381A113	00000
M36 × 4 mm	55 mm	18 mm	DIN 439B, ISO 4035	1	90710A060	00000
M42 × 4.5 mm	65 mm	16 mm	DIN 936	1	90381A114	00000

Super-Corrosion-Resistant 316 Stainless Steel



		1/4"-20	7/16"	5/32"	—	50	94805A029	0000
		1/4"-28	7/16"	5/32"	—	50	94805A209	0000
		5/16"-18	1/2"	3/16"	—	25	94805A110	0000
		5/16"-24	1/2"	3/16"	—	25	94805A213	0000
		3/8"-16	9/16"	7/32"	—	25	94805A115	0000
		3/8"-24	9/16"	7/32"	—	25	94805A217	0000
		7/16"-14	11/16"	1/4"	—	10	94805A261	0000
		7/16"-20	11/16"	1/4"	—	10	94805A221	0000
		1/2"-13	3/4"	5/16"	—	10	94805A125	0000
		1/2"-20	3/4"	5/16"	—	10	94805A224	0000


		9/16"-12	7/8"	5/16"	—	5	94805A262	0000
		9/16"-18	7/8"	5/16"	—	1	94805A228	0000
		5/8"-11	15/16"	3/8"	—	5	94805A130	0000
		5/8"-18	15/16"	3/8"	—	5	94805A231	0000
		3/4"-10	1 1/8"	27/64"	—	1	94805A135	0000
		3/4"-16	1 1/8"	27/64"	—	1	94805A233	0000
		7/8"-9	1 5/16"	31/64"	—	1	94805A037	0000
		7/8"-14	1 5/16"	31/64"	—	1	94805A041	0000
		1"-8	1 1/2"	35/64"	—	1	94805A038	0000
		1"-12	1 1/2"	35/64"	—	1	94805A263	0000


		1"-14	1 1/2"	35/64"	—	1	94805A237	0000
		1 1/8"-7	1 11/16"	39/64"	—	1	94805A264	00000
		1 1/8"-12	1 11/16"	39/64"	—	1	94805A265	00000
		1 1/4"-7	1 7/8"	23/32"	—	1	94805A247	0000
		1 1/4"-12	1 7/8"	23/32"	—	1	94805A266	00000
		1 1/2"-6	2 1/4"	27/32"	—	1	94805A267	00000
		1 1/2"-12	2 1/4"	27/32"	—	1	94805A268	00000
		1 3/4"-5	2 5/8"	31/32"	—	1	94805A269	00000
		2"-4 1/2	3"	1 3/32"	—	1	94805A271	00000
		M2 × 0.4 mm	4 mm	1.2 mm	DIN 439B, ISO 4035	25	93935A305	0000


		M2.5 × 0.45 mm	5 mm	1.6 mm	DIN 439B, ISO 4035	50	93935A310	0000
		M3 × 0.5 mm	5.5 mm	1.8 mm	DIN 439B, ISO 4035	100	93935A320	00000
		M4 × 0.7 mm	7 mm	2.2 mm	DIN 439B, ISO 4035	50	93935A325	0000
		M5 × 0.8 mm	8 mm	2.7 mm	DIN 439B, ISO 4035	50	93935A330	0000
		M6 × 1 mm	10 mm	3.2 mm	DIN 439B, ISO 4035	50	93935A335	00000
		M8 × 0.75 mm	13 mm	4 mm	DIN 439B, ISO 4035	10	97289A123	0000
		M8 × 1 mm	13 mm	4 mm	DIN 439B, ISO 4035	10	97289A124	0000
		M8 × 1.25 mm	13 mm	4 mm	DIN 439B, ISO 4035	50	93935A340	00000
		M8 × 1.25 mm	13 mm	5 mm	DIN 936	10	97289A111	0000
		M10 × 1.25 mm	17 mm	5 mm	DIN 439B, ISO 4035	5	97289A125	0000


		M10 × 1.5 mm	17 mm	5 mm	DIN 439B, ISO 4035	20	93935A345	00000
		M10 × 1.5 mm	17 mm	6 mm	DIN 936	10	97289A112	00000
		M12 × 1.25 mm	19 mm	6 mm	DIN 439B, ISO 4035	1	97289A126	0000
		M12 × 1.5 mm	19 mm	6 mm	DIN 439B, ISO 4035	1	97289A127	0000
		M12 × 1.75 mm	19 mm	6 mm	DIN 439B, ISO 4035	10	93935A350	00000
		M12 × 1.75 mm	19 mm	7 mm	DIN 936	5	97289A113	0000
		M14 × 1.5 mm	22 mm	7 mm	DIN 439B, ISO 4035	1	97289A128	0000
		M14 × 2 mm	22 mm	7 mm	DIN 439B, ISO 4035	5	93935A355	0000
		M14 × 2 mm	22 mm	8 mm	DIN 936	1	97289A114	0000
		M16 × 1.5 mm	24 mm	8 mm	DIN 439B, ISO 4035	1	97289A129	0000


		M16 × 2 mm	24 mm	8 mm	DIN 439B, ISO 4035	5	93935A360	00000
M16 × 2 mm		24 mm	8 mm	DIN 936	1	97289A115	0000
M18 × 1.5 mm	27 mm	9 mm	DIN 439B, ISO 4035	1	97289A131	0000
M18 × 2.5 mm	27 mm	9 mm	DIN 936	1	97289A116	0000
M20 × 2 mm	30 mm	10 mm	DIN 439B, ISO 4035	1	97289A132	0000
M20 × 2.5 mm	30 mm	9 mm	DIN 936	1	97289A117	0000
M20 × 2.5 mm	30 mm	10 mm	DIN 439B, ISO 4035	1	93935A365	0000
M22 × 2.5 mm	32 mm	10 mm	DIN 936	1	97289A118	00000
M24 × 3 mm	36 mm	10 mm	DIN 936	1	97289A119	0000
M24 × 3 mm	36 mm	12 mm	DIN 439B, ISO 4035	1	93935A370	00000
M27 × 2 mm	41 mm	13.5 mm	DIN 439B, ISO 4035	1	97289A133	00000
M27 × 3 mm	41 mm	12 mm	DIN 936	1	97289A121	00000
M30 × 2 mm	46 mm	15 mm	DIN 439B, ISO 4035	1	97289A134	00000
M30 × 3.5 mm	46 mm	12 mm	DIN 936	1	97289A122	00000
M30 × 3.5 mm	46 mm	15 mm	DIN 439B, ISO 4035	1	93935A375	00000
M33 × 2 mm	50 mm	16.5 mm	DIN 439B, ISO 4035	1	97289A135	00000
M36 × 1.5 mm	55 mm	18 mm	DIN 439B, ISO 4035	1	97289A136	00000
M36 × 4 mm	55 mm	18 mm	DIN 439B, ISO 4035	1	93935A380	00000

Corrosion-Resistant Stainless Steel with Material Certificate

18-8 Stainless Steel—The choice for wet and outdoor environments, these nuts resist rust. However, they won't hold up to the harsh chemicals that 316 stainless steel can.

Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.

	Wd.	Ht.	Pkg. Qty.		Pkg.
18-8 Stainless Steel



	7/8"-20	1 5/16"	31/64"	1	95621A900	000000

Mil. Spec. Hex Nuts

These nuts are manufactured and tested to strict U.S. military standards for material and construction.

Low-Strength Steel

Image of Product. Front orientation. Hex Nuts. Mil. Spec. Hex Nuts.

Steel—Best for dry environments since moisture will cause these nuts to rust.

	Wd.	Ht.	Mil. Spec.	Fastener Strength Grade/Class	Pkg. Qty.		Pkg.
Steel



	2"-4 1/2	3"	1 23/32"	MIL-DTL-1222	SAE Grade 2	1	90490A046	000000

Corrosion-Resistant Stainless Steel

18-8 Stainless Steel—The choice for wet and outdoor environments, these nuts resist rust. However, they won't hold up to the harsh chemicals that 316 stainless steel can.

	Wd.	Ht.	Mil. Spec.	Specs. Met	Pkg. Qty.		Pkg.
18-8 Stainless Steel



	0-80	5/32"	3/64"	MS35650-314	Fed. Spec. FF-N-836, Fed. Spec. QQ-P-35	5	91240A001	00000
	4-40	1/4"	3/32"	MS35649-244	Fed. Spec. FF-N-836, Fed. Spec. QQ-P-35	25	91240A005	00000
	6-32	5/16"	7/64"	MS35649-264	Fed. Spec. FF-N-836, Fed. Spec. QQ-P-35	25	91240A007	00000
	8-32	11/32"	1/8"	MS35649-284	Fed. Spec. FF-N-836, Fed. Spec. QQ-P-35	10	91240A009	0000
	10-24	3/8"	1/8"	MS35649-204	Fed. Spec. FF-N-836, Fed. Spec. QQ-P-35	10	91240A011	0000
	10-32	3/8"	1/8"	MS35650-304	Fed. Spec. FF-N-836, Fed. Spec. QQ-P-35	10	91240A411	0000
	1/4"-20	7/16"	3/16"	MS35649-2254	Fed. Spec. FF-N-836, Fed. Spec. QQ-P-35	10	91240A029	0000
	1/4"-28	7/16"	3/16"	MS35650-3254	Fed. Spec. FF-N-836, Fed. Spec. QQ-P-35	5	91240A078	0000
	1/4"-28	7/16"	7/32"	MS51972-1	Fed. Spec. FF-N-836, Fed. Spec. QQ-P-35	10	90762A115	0000
	5/16"-18	1/2"	17/64"	MS51971-2	Fed. Spec. FF-N-836, Fed. Spec. QQ-P-35	10	90762A118	0000


	5/16"-18	9/16"	7/32"	MS35649-2314	Fed. Spec. FF-N-836, Fed. Spec. QQ-P-35	5	91240A030	0000
	5/16"-24	1/2"	17/64"	MS51972-2	Fed. Spec. FF-N-836, Fed. Spec. QQ-P-35	5	90762A123	0000
	5/16"-24	9/16"	7/32"	MS35650-3314	Fed. Spec. FF-N-836, Fed. Spec. QQ-P-35	1	91240A511	0000
	3/8"-16	9/16"	21/64"	MS51971-3	Fed. Spec. FF-N-836, Fed. Spec. QQ-P-35	5	90762A127	0000
	3/8"-16	5/8"	1/4"	MS35649-2384	Fed. Spec. FF-N-836, Fed. Spec. QQ-P-35	5	91240A031	0000
	3/8"-24	9/16"	21/64"	MS51972-3	Fed. Spec. FF-N-836, Fed. Spec. QQ-P-35	5	90762A132	0000
	3/8"-24	5/8"	1/4"	MS35650-3384	Fed. Spec. FF-N-836, Fed. Spec. QQ-P-35	1	91240A512	0000
	1/2"-13	3/4"	7/16"	MS51971-5	Fed. Spec. FF-N-836, Fed. Spec. QQ-P-35	1	90762A136	0000
	1/2"-20	3/4"	7/16"	MS51972-5	Fed. Spec. FF-N-836, Fed. Spec. QQ-P-35	1	90762A139	0000
	5/8"-11	15/16"	35/64"	MS51971-7	Fed. Spec. FF-N-836, Fed. Spec. QQ-P-35	1	90762A144	0000


	3/4"-10	1 1/8"	41/64"	MS51971-8	Fed. Spec. FF-N-836, Fed. Spec. QQ-P-35	1	90762A147	0000

Corrosion-Resistant Stainless Steel with Material Certificate

18-8 Stainless Steel—The choice for wet and outdoor environments, these nuts resist rust. However, they won't hold up to the harsh chemicals that 316 stainless steel can.

Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.

	Wd.	Ht.	Mil. Spec.	Specs. Met	Pkg. Qty.		Pkg.
18-8 Stainless Steel



	2-56	3/16"	1/16"	MS35649-224	Fed. Spec. FF-N-836, Fed. Spec. QQ-P-35	25	91240A003	000000
	1/4"-20	7/16"	7/32"	MS51971-1	Fed. Spec. FF-N-836, Fed. Spec. QQ-P-35	10	90762A112	0000

Left-Hand-Thread Thin-Profile Hex Nuts

These nuts tighten when turned to the left. Use them with left-hand rods and screws to prevent counterclockwise-moving parts from loosening. About half the height of standard-profile nuts, these fit in spaces with low clearance. You can also use them as jam nuts by threading them against another hex nut to hold it in place.

Low-Strength Steel

Steel—Best for dry environments since moisture will cause these nuts to rust.

	Wd.	Ht.	Fastener Strength Grade/Class	Pkg. Qty.		Pkg.
Steel



	1/4"-20	7/16"	5/32"	SAE Grade 2	50	90083A029	00000
	1/4"-28	7/16"	5/32"	SAE Grade 2	100	90083A205	00000
	5/16"-18	1/2"	3/16"	SAE Grade 2	50	90083A030	0000
	5/16"-24	1/2"	3/16"	SAE Grade 2	100	90083A210	00000
	3/8"-16	9/16"	7/32"	SAE Grade 2	25	90083A031	0000
	3/8"-24	9/16"	7/32"	SAE Grade 2	50	90083A215	00000
	1/2"-13	3/4"	5/16"	SAE Grade 2	25	90083A222	00000
	1/2"-20	3/4"	5/16"	SAE Grade 2	25	90083A225	00000
	5/8"-11	15/16"	3/8"	SAE Grade 2	10	90083A230	00000
	5/8"-18	15/16"	3/8"	SAE Grade 2	10	90083A235	00000


	3/4"-10	1 1/8"	27/64"	SAE Grade 2	10	90083A240	00000
	3/4"-16	1 1/8"	27/64"	SAE Grade 2	10	90083A245	00000
	1"-8	1 1/2"	35/64"	SAE Grade 2	5	90083A255	00000
	1"-14	1 1/2"	35/64"	SAE Grade 2	5	90083A260	00000

Corrosion-Resistant Stainless Steel

18-8 Stainless Steel—The choice for wet and outdoor environments, these nuts resist rust. However, they won't hold up to the harsh chemicals that 316 stainless steel can.

Super-Corrosion-Resistant 316 Stainless Steel—Superior to 18-8 stainless steel, these nuts won't degrade when exposed to harsh weather, salt water, and most chemicals.

	Thread Size	Wd.	Ht.	Specs. Met	Pkg. Qty.		Pkg.
18-8 Stainless Steel



		4-40	1/4"	1/16"	—	1	94450A511	00000
		5-40	5/16"	3/32"	—	1	94450A513	0000
		6-32	5/16"	3/32"	—	1	94450A515	0000
		8-32	11/32"	7/64"	—	1	94450A517	0000
		10-24	3/8"	7/64"	—	1	94450A519	0000
		10-32	3/8"	7/64"	—	1	94450A521	0000
		12-24	7/16"	9/64"	—	1	94450A522	0000
		1/4"-20	7/16"	5/32"	—	5	94450A218	0000
		1/4"-28	7/16"	5/32"	—	5	94450A220	0000
		5/16"-18	1/2"	3/16"	—	5	94450A238	0000


		5/16"-24	1/2"	3/16"	—	5	94450A240	0000
		3/8"-16	9/16"	7/32"	—	5	94450A257	0000
		3/8"-24	9/16"	7/32"	—	5	94450A260	0000
		7/16"-14	11/16"	1/4"	ASME B18.2.2	1	94450A524	0000
		7/16"-20	11/16"	1/4"	ASME B18.2.2	1	94450A525	0000
		1/2"-13	3/4"	5/16"	—	5	94450A270	0000
		1/2"-20	3/4"	5/16"	—	5	94450A280	00000
		9/16"-12	7/8"	5/16"	ASME B18.2.2	1	94450A526	0000
		9/16"-18	7/8"	5/16"	ASME B18.2.2	1	94450A527	0000
		5/8"-11	15/16"	3/8"	—	1	94450A310	0000


		5/8"-18	15/16"	3/8"	—	1	94450A315	0000
		3/4"-10	1 1/8"	27/64"	—	1	94450A331	0000
		3/4"-16	1 1/8"	27/64"	—	1	94450A336	0000
		7/8"-9	1 5/16"	31/64"	ASME B18.2.2	1	94450A528	00000
		7/8"-14	1 5/16"	31/64"	ASME B18.2.2	1	94450A529	00000
		7/8"-20	1 5/16"	31/64"	ASME B18.2.2	1	94450A531	00000
		1"-8	1 1/2"	35/64"	ASME B18.2.2	1	94450A532	00000
		1"-12	1 1/2"	35/64"	ASME B18.2.2	1	94450A533	00000
		1"-14	1 1/2"	35/64"	ASME B18.2.2	1	94450A534	00000
		1 1/4"-12	1 7/8"	23/32"	ASME B18.2.2	1	94450A538	00000


		1 1/2"-6	2 1/4"	27/32"	ASME B18.2.2	1	94450A539	00000
		1 1/2"-12	2 1/4"	27/32"	ASME B18.2.2	1	94450A541	00000
		2"-4 1/2	3"	1 3/32"	ASME B18.2.2	1	94450A544	00000
		2"-12	3"	1 3/32"	ASME B18.2.2	1	94450A545	00000
		M3 × 0.5 mm	5.5 mm	1.8 mm	DIN 439B	1	94450A546	0000
		M4 × 0.5 mm	7 mm	2.2 mm	DIN 439B	1	94450A565	0000
		M4 × 0.7 mm	7 mm	2.2 mm	DIN 439B	1	94450A547	0000
		M5 × 0.5 mm	8 mm	2.7 mm	DIN 439B	1	94450A566	0000
		M5 × 0.8 mm	8 mm	2.7 mm	DIN 439, ISO 4035	10	94450A111	0000
		M6 × 0.75 mm	10 mm	3.2 mm	DIN 439B	1	94450A567	0000


		M6 × 1 mm	10 mm	3.2 mm	DIN 439, ISO 4035	10	94450A112	0000
		M6 × 1 mm	10 mm	3.2 mm	DIN 439B	1	94450A549	0000
		M8 × 1 mm	13 mm	4 mm	DIN 439, ISO 4035	5	94450A114	0000
		M8 × 1.25 mm	13 mm	4 mm	DIN 439, ISO 4035	10	94450A113	0000
		M8 × 1.25 mm	13 mm	4 mm	DIN 439B	1	94450A551	0000
		M10 × 1 mm	17 mm	5 mm	DIN 439B	1	94450A569	0000
		M10 × 1.25 mm	17 mm	5 mm	DIN 439, ISO 4035	1	94450A116	0000
		M10 × 1.5 mm	17 mm	5 mm	DIN 439, ISO 4035	5	94450A115	0000
		M10 × 1.5 mm	17 mm	5 mm	DIN 439B	1	94450A552	0000
		M12 × 1.25 mm	19 mm	6 mm	DIN 439, ISO 4035	1	94450A118	0000


		M12 × 1.75 mm	19 mm	6 mm	DIN 439, ISO 4035	1	94450A117	0000
M12 × 1.75 mm		19 mm	6 mm	DIN 439B	1	94450A553	0000
M14 × 1.5 mm	22 mm	7 mm	DIN 439B	1	94450A572	0000
M14 × 2 mm	22 mm	7 mm	DIN 439, ISO 4035	1	94450A119	0000
M16 × 1.5 mm	24 mm	8 mm	DIN 439, ISO 4035	1	94450A122	0000
M16 × 1.5 mm	24 mm	8 mm	DIN 439B	1	94450A573	0000
M16 × 2 mm	24 mm	8 mm	DIN 439, ISO 4035	1	94450A121	0000
M16 × 2 mm	24 mm	8 mm	DIN 439B	1	94450A555	0000
M20 × 1.5 mm	30 mm	10 mm	DIN 439B	1	94450A575	00000
M20 × 2.5 mm	30 mm	10 mm	DIN 439, ISO 4035	1	94450A124	0000
M22 × 1.5 mm	32 mm	11 mm	DIN 439B	1	94450A576	00000
M22 × 2.5 mm	32 mm	11 mm	DIN 439B	1	94450A558	00000
M24 × 1.5 mm	36 mm	12 mm	DIN 439B	1	94450A577	00000
M24 × 3 mm	36 mm	12 mm	DIN 439, ISO 4035	1	94450A125	00000
M27 × 1.5 mm	41 mm	13.5 mm	DIN 439B	1	94450A579	00000
M30 × 1.5 mm	46 mm	15 mm	DIN 439B	1	94450A582	00000
M30 × 2 mm	46 mm	15 mm	DIN 439B	1	94450A581	00000

Super-Corrosion-Resistant 316 Stainless Steel



		4-40	1/4"	1/16"	—	1	93031A148	0000
		6-32	5/16"	3/32"	—	1	93031A153	0000
		8-32	11/32"	7/64"	—	1	93031A155	0000
		10-24	3/8"	7/64"	—	1	93031A157	0000
		10-32	3/8"	7/64"	—	1	93031A158	0000
		1/4"-20	7/16"	5/32"	—	1	93031A162	0000
		1/4"-28	7/16"	5/32"	—	1	93031A163	0000
		5/16"-24	1/2"	3/16"	—	1	93031A165	0000
		3/8"-16	9/16"	7/32"	—	1	93031A166	0000
		3/8"-24	9/16"	7/32"	—	1	93031A167	0000


		7/16"-20	11/16"	1/4"	—	1	93031A169	0000
		1/2"-13	3/4"	5/16"	—	1	93031A171	0000
		1/2"-20	3/4"	5/16"	—	1	93031A172	0000
		9/16"-18	7/8"	5/16"	—	1	93031A174	00000
		5/8"-18	15/16"	3/8"	—	1	93031A176	00000
		3/4"-10	1 1/8"	27/64"	—	1	93031A177	00000
		3/4"-16	1 1/8"	27/64"	—	1	93031A178	00000
		1"-12	1 1/2"	35/64"	—	1	93031A184	00000
		1"-14	1 1/2"	35/64"	—	1	93031A185	00000
		1 1/4"-12	1 7/8"	23/32"	—	1	93031A189	00000


		1 1/2"-6	2 1/4"	27/32"	—	1	93031A191	00000
		2"-12	3"	1 3/32"	—	1	93031A196	00000
		M6 × 0.75 mm	10 mm	3.2 mm	DIN 439B, ISO 4035	1	93031A132	0000
		M6 × 1 mm	10 mm	3.2 mm	DIN 439B, ISO 4035	1	93031A114	0000
		M8 × 1 mm	13 mm	4 mm	DIN 439B, ISO 4035	1	93031A133	0000
		M8 × 1.25 mm	13 mm	4 mm	DIN 439B, ISO 4035	1	93031A115	0000
		M10 × 1 mm	17 mm	5 mm	DIN 439B, ISO 4035	1	93031A134	0000
		M10 × 1.25 mm	17 mm	5 mm	DIN 439B	1	93031A211	0000
		M10 × 1.5 mm	17 mm	5 mm	DIN 439B, ISO 4035	1	93031A116	0000
		M12 × 1.25 mm	19 mm	6 mm	DIN 439B	1	93031A212	0000


		M12 × 1.5 mm	19 mm	6 mm	DIN 439B, ISO 4035	1	93031A135	0000
		M12 × 1.75 mm	19 mm	6 mm	DIN 439B, ISO 4035	1	93031A117	0000
		M14 × 1.5 mm	22 mm	7 mm	DIN 439B, ISO 4035	1	93031A136	00000
		M16 × 1.5 mm	24 mm	8 mm	DIN 439B, ISO 4035	1	93031A137	00000
		M16 × 2 mm	24 mm	8 mm	DIN 439B, ISO 4035	1	93031A119	00000
		M18 × 1.5 mm	27 mm	9 mm	DIN 439B, ISO 4035	1	93031A138	00000
		M20 × 1.5 mm	30 mm	10 mm	DIN 439B, ISO 4035	1	93031A139	00000
		M22 × 1.5 mm	32 mm	11 mm	DIN 439B, ISO 4035	1	93031A141	00000
		M24 × 2 mm	36 mm	12 mm	DIN 439B, ISO 4035	1	93031A213	00000
		M30 × 1.5 mm	46 mm	15 mm	DIN 439B, ISO 4035	1	93031A146	00000

Corrosion-Resistant Stainless Steel with Material Certificate

18-8 Stainless Steel—The choice for wet and outdoor environments, these nuts resist rust. However, they won't hold up to the harsh chemicals that 316 stainless steel can.

Super-Corrosion-Resistant 316 Stainless Steel—Superior to 18-8 stainless steel, these nuts won't degrade when exposed to harsh weather, salt water, and most chemicals.

	Wd.	Ht.	Specs. Met	Pkg. Qty.		Pkg.
18-8 Stainless Steel



	1 1/4"-7	1 7/8"	23/32"	ASME B18.2.2	1	94450A537	000000
	M3 × 0.35 mm	5.5 mm	1.8 mm	DIN 439B	1	94450A564	0000
	M5 × 0.8 mm	8 mm	2.7 mm	DIN 439B	1	94450A548	0000
	M27 × 2 mm	41 mm	13.5 mm	DIN 439B	1	94450A578	00000


	Super-Corrosion-Resistant 316 Stainless Steel



			M5 × 0.5 mm	8 mm	2.7 mm	DIN 439B, ISO 4035	1	93031A131	0000

Narrow-Profile Hex Nuts

When you have limited space for tightening with a wrench, use these nuts. Since they’re about 20% narrower, they fit in tight spots where standard-profile nuts won't fit. Also known as small-pattern hex nuts.

Steel

Steel—Best for dry environments since moisture will cause these nuts to rust.

	Wd.	Ht.	Pkg. Qty.		Pkg.
Steel



	4-40	3/16"	1/16"	100	90760A210	00000

Corrosion-Resistant Stainless Steel

18-8 Stainless Steel—The choice for wet and outdoor environments, these nuts resist rust. However, they won't hold up to the harsh chemicals that 316 stainless steel can.

Super-Corrosion-Resistant 316 Stainless Steel—Superior to 18-8 stainless steel, these nuts won't degrade when exposed to harsh weather, salt water, and most chemicals.

	Wd.	Ht.	Pkg. Qty.		Pkg.
18-8 Stainless Steel



	0-80	1/8"	3/64"	50	90730A001	00000
	1-64	1/8"	3/64"	50	90730A511	0000
	1-72	7/64"	1/16"	5	90001A605	00000
	2-56	5/32"	1/16"	100	90730A003	0000
	4-40	3/16"	1/16"	100	90730A005	0000
	5-40	1/4"	3/32"	100	90730A006	0000
	6-32	1/4"	3/32"	100	90730A007	0000
	8-32	1/4"	3/32"	100	90730A009	0000
	8-32	5/16"	7/64"	100	90730A010	0000
	10-24	5/16"	7/64"	100	90730A011	0000


	10-24	11/32"	1/8"	100	90730A512	00000
	10-32	5/16"	7/64"	100	90730A411	0000
	10-32	11/32"	1/8"	100	90730A015	00000


	Super-Corrosion-Resistant 316 Stainless Steel



			4-40	3/16"	1/16"	1	90205A321	0000
			5-40	1/4"	3/32"	1	90205A322	0000
			6-32	1/4"	3/32"	1	90205A323	0000
			8-32	1/4"	3/32"	50	90205A309	00000
			8-32	5/16"	7/64"	1	90205A324	0000
			10-24	1/4"	3/32"	1	90205A325	0000
			10-24	5/16"	7/64"	50	90205A313	00000
			10-24	11/32"	1/8"	1	90205A326	0000
			10-32	5/16"	7/64"	50	90205A319	00000
			10-32	11/32"	1/8"	1	90205A328	0000


			M3.5 × 0.6 mm	5.5 mm	2.5 mm	1	90205A343	0000
			M4 × 0.7 mm	5.5 mm	2.5 mm	1	90205A344	0000
			M4 × 0.7 mm	7 mm	2.9 mm	1	90205A345	0000
			M5 × 0.8 mm	7 mm	2.5 mm	1	90205A346	0000

Corrosion-Resistant Stainless Steel with Material Certificate

Super-Corrosion-Resistant 316 Stainless Steel—Superior to 18-8 stainless steel, these nuts won't degrade when exposed to harsh weather, salt water, and most chemicals.

	Wd.	Ht.	Pkg. Qty.		Pkg.
Super-Corrosion-Resistant 316 Stainless Steel



	10-32	1/4"	3/32"	1	90205A327	00000
	M3 × 0.5 mm	5 mm	1.7 mm	1	90205A342	0000
	M5 × 0.8 mm	7.5 mm	2.9 mm	1	90205A347	0000

Heavy-Profile Hex Nuts

About 10% wider and taller than standard-profile hex nuts, these handle heavier loads by distributing them over a larger area.

Medium-Strength Steel

These Grade 5 or Class 8 nuts are your go-to for fastening most machinery and equipment. To avoid stripped threads during installation, make sure your screw has a comparable strength rating.

Steel—Best for dry environments since moisture will cause these nuts to rust.

	Wd.	Ht.	Fastener Strength Grade/Class	Pkg. Qty.		Pkg.
Steel



	1/4"-20	1/2"	15/64"	SAE Grade 5	100	95045A029	00000
	5/16"-18	9/16"	19/64"	SAE Grade 5	100	95045A030	00000
	3/8"-16	11/16"	23/64"	SAE Grade 5	50	95045A031	00000
	7/16"-14	3/4"	27/64"	SAE Grade 5	25	95045A032	0000
	1/2"-13	7/8"	31/64"	SAE Grade 5	25	95045A033	00000
	9/16"-12	15/16"	35/64"	SAE Grade 5	25	95045A034	00000
	5/8"-11	1 1/16"	39/64"	SAE Grade 5	10	95045A035	0000
	3/4"-10	1 1/4"	47/64"	SAE Grade 5	10	95045A036	00000
	7/8"-9	1 7/16"	55/64"	SAE Grade 5	5	95045A037	00000
	1"-8	1 5/8"	63/64"	SAE Grade 5	5	95045A038	00000


	1 1/8"-7	1 13/16"	1 7/64"	SAE Grade 5	1	95045A039	0000
	1 1/4"-7	2"	1 7/32"	SAE Grade 5	1	95045A040	0000
	1 3/8"-6	2 3/16"	1 11/32"	SAE Grade 5	1	95045A041	0000
	1 1/2"-6	2 3/8"	1 15/32"	SAE Grade 5	1	95045A042	0000
	1 3/4"-5	2 3/4"	1 23/32"	SAE Grade 5	1	95045A044	00000
	2"-4 1/2	3 1/8"	1 31/32"	SAE Grade 5	1	95045A046	00000
	2 1/4"-4 1/2	3 1/2"	2 13/64"	SAE Grade 5	1	95045A048	00000
	2 1/2"-4	3 7/8"	2 29/64"	SAE Grade 5	1	95045A049	00000

High-Strength Steel

Steel—Best for dry environments since moisture will cause these nuts to rust.

	Wd., mm	Ht., mm	Fastener Strength Grade/Class	Specs. Met	Pkg. Qty.		Pkg.
Steel



	M12 × 1.75 mm	22	10	ISO Class 10	DIN 6915, ISO 4775	5	91872A120	000000
	M16 × 2 mm	27	13	ISO Class 10	DIN 6915, ISO 4775	5	91872A220	0000
	M20 × 2.5 mm	32	16	ISO Class 10	DIN 6915, ISO 4775	5	91872A320	00000
	M24 × 3 mm	41	19	ISO Class 10	DIN 6915, ISO 4775	1	91872A420	0000
	M30 × 3.5 mm	50	24	ISO Class 10	DIN 6915	1	91872A122	0000

Extreme-Strength Steel

These nuts are about 20% stronger than high-strength steel nuts. To avoid stripped threads during installation, make sure your screw has a comparable strength rating.

Steel—Best for dry environments since moisture will cause these nuts to rust.

	Thread Size	Wd.	Ht.	Fastener Strength Grade/Class	Specs. Met	Pkg. Qty.		Pkg.
Steel



		1/4"-20	1/2"	15/64"	ASTM Grade 2H	ASTM A194	100	90521A106	000000
		1/4"-28	1/2"	15/64"	ASTM Grade 2H	ASME B18.2.2, ASTM A194	50	90521A104	00000
		5/16"-18	9/16"	19/64"	ASTM Grade 2H	ASTM A194	50	90521A107	00000
		5/16"-24	9/16"	19/64"	ASTM Grade 2H	ASME B18.2.2, ASTM A194	50	90521A108	00000
		3/8"-16	11/16"	23/64"	ASTM Grade 2H	ASTM A194	50	90521A225	00000
		3/8"-24	11/16"	23/64"	ASTM Grade 2H	ASME B18.2.2, ASTM A194	25	90521A229	0000
		7/16"-14	3/4"	27/64"	ASTM Grade 2H	ASTM A194	25	90521A109	00000
		7/16"-20	3/4"	27/64"	ASTM Grade 2H	ASME B18.2.2, ASTM A194	25	90521A110	00000
		1/2"-13	7/8"	31/64"	ASTM Grade 2H	ASTM A194	25	90521A235	00000
		1/2"-20	7/8"	31/64"	ASTM Grade 2H	ASME B18.2.2, ASTM A194	25	90521A236	00000


		9/16"-12	15/16"	35/64"	ASTM Grade 2H	ASME B18.2.2, ASTM A194	10	90521A281	0000
		5/8"-11	1 1/16"	39/64"	ASTM Grade 2H	ASTM A194	10	90521A240	00000
		5/8"-18	1 1/16"	39/64"	ASTM Grade 2H	ASME B18.2.2, ASTM A194	25	90521A242	00000
		3/4"-10	1 1/4"	47/64"	ASTM Grade 2H	ASTM A194	10	90521A245	00000
		3/4"-16	1 1/4"	47/64"	ASTM Grade 2H	ASME B18.2.2, ASTM A194	10	90521A247	00000
		7/8"-9	1 7/16"	55/64"	ASTM Grade 2H	ASTM A194	10	90521A250	00000
		7/8"-14	1 7/16"	55/64"	ASTM Grade 2H	ASME B18.2.2, ASTM A194	10	90521A253	00000
		1"-8	1 5/8"	63/64"	ASTM Grade 2H	ASTM A194	5	90521A255	00000
		1"-12	1 5/8"	63/64"	ASTM Grade 2H	ASME B18.2.2, ASTM A194	1	90521A257	0000
		1"-14	1 5/8"	63/64"	ASTM Grade 2H	ASME B18.2.2, ASTM A194	5	90521A259	00000


		1 1/8"-7	1 13/16"	1 7/64"	ASTM Grade 2H	ASTM A194	1	90521A260	0000
		1 1/8"-8	1 13/16"	1 7/64"	ASTM Grade 2H	ASTM A194	1	90521A265	0000
		1 1/8"-12	1 13/16"	1 7/64"	ASTM Grade 2H	ASME B18.2.2, ASTM A194	1	90521A267	0000
		1 1/4"-7	2"	1 7/32"	ASTM Grade 2H	ASTM A194	1	90521A270	0000
		1 1/4"-8	2"	1 7/32"	ASTM Grade 2H	ASTM A194	1	90521A275	0000
		1 1/4"-12	2"	1 7/32"	ASTM Grade 2H	ASME B18.2.2, ASTM A194	1	90521A278	0000
		1 3/8"-6	2 3/16"	1 11/32"	ASTM Grade 2H	ASME B18.2.2, ASTM A194	1	90521A290	0000
		1 3/8"-8	2 3/16"	1 11/32"	ASTM Grade 2H	ASTM A194	1	90521A042	0000
		1 3/8"-12	2 3/16"	1 11/32"	ASTM Grade 2H	ASME B18.2.2, ASTM A194	1	90521A295	0000
		1 1/2"-6	2 3/8"	1 15/32"	ASTM Grade 2H	ASTM A194	1	90521A039	0000


		1 1/2"-8	2 3/8"	1 15/32"	ASTM Grade 2H	ASTM A194	1	90521A041	0000
		1 1/2"-12	2 3/8"	1 15/32"	ASTM Grade 2H	ASTM A194	1	90521A052	0000
		1 5/8"-8	2 9/16"	1 19/32"	ASTM Grade 2H	ASME B18.2.2, ASTM A194	1	90521A055	0000
		1 3/4"-5	2 3/4"	1 23/32"	ASTM Grade 2H	ASTM A194	1	90521A043	00000
		1 3/4"-8	2 3/4"	1 23/32"	ASTM Grade 2H	ASTM A194	1	90521A044	00000
		1 7/8"-8	2 15/16"	1 27/32"	ASTM Grade 2H	ASME B18.2.2, ASTM A194	1	90521A037	00000
		2"-4 1/2	3 1/8"	1 31/32"	ASTM Grade 2H	ASTM A194	1	90521A038	00000
		2"-8	3 1/8"	1 31/32"	ASTM Grade 2H	ASTM A194	1	90521A046	00000
		2 1/4"-4 1/2	3 1/2"	2 13/64"	ASTM Grade 2H	ASME B18.2.2, ASTM A194	1	90521A282	00000
		2 1/4"-8	3 1/2"	2 13/64"	ASTM Grade 2H	ASME B18.2.2, ASTM A194	1	90521A050	00000


		2 1/2"-4	3 7/8"	2 29/64"	ASTM Grade 2H	ASME B18.2.2, ASTM A194	1	90521A283	00000
		M10 × 1.5 mm	19 mm	12 mm	ASTM Grade 2H	ASTM A194	5	98498A111	0000
		M12 × 1.75 mm	21 mm	12 mm	ASTM Grade 2H	ASTM A194, DIN 6915	5	98498A100	0000
		M14 × 2 mm	24 mm	14 mm	ASTM Grade 2H	ASTM A194, DIN 6915	5	98498A112	0000
		M16 × 2 mm	27 mm	17 mm	ASTM Grade 2H	ASTM A194, DIN 6915	5	98498A300	0000
		M18 × 2.5 mm	30 mm	19 mm	ASTM Grade 2H	ASTM A194, DIN 6915	5	98498A113	00000
		M20 × 2.5 mm	33 mm	20 mm	ASTM Grade 2H	ASTM A194, DIN 6915	5	98498A500	00000
		M22 × 2.5 mm	36 mm	23 mm	ASTM Grade 2H	ASTM A194, DIN 6915	1	98498A114	0000
		M24 × 3 mm	41 mm	24 mm	ASTM Grade 2H	ASTM A194, DIN 6915	1	98498A600	0000
		M27 × 3 mm	46 mm	27 mm	ASTM Grade 2H	ASTM A194, DIN 6915	1	98498A115	0000


		M30 × 3.5 mm	50 mm	30 mm	ASTM Grade 2H	ASTM A194, DIN 6915	1	98498A700	00000
M33 × 3.5 mm		55 mm	33 mm	ASTM Grade 2H	ASTM A194, DIN 6915	1	98498A116	00000
M36 × 3 mm	60 mm	36 mm	ASTM Grade 2H	ASTM A194, DIN 6915	1	98498A123	00000
M36 × 4 mm	60 mm	36 mm	ASTM Grade 2H	ASTM A194, DIN 6915	1	98498A800	00000
M39 × 4 mm	65 mm	39 mm	ASTM Grade 2H	ASTM A194	1	98498A117	00000
M42 × 3 mm	70 mm	42 mm	ASTM Grade 2H	ASTM A194	1	98498A140	00000
M42 × 4.5 mm	70 mm	42 mm	ASTM Grade 2H	ASTM A194	1	98498A118	00000
M45 × 4.5 mm	75 mm	45 mm	ASTM Grade 2H	ASTM A194	1	98498A211	00000
M48 × 3 mm	80 mm	48 mm	ASTM Grade 2H	ASTM A194	1	98498A212	00000
M48 × 5 mm	80 mm	48 mm	ASTM Grade 2H	ASTM A194	1	98498A119	00000
M52 × 5 mm	85 mm	52 mm	ASTM Grade 2H	ASTM A194	1	98498A121	00000
M56 × 5.5 mm	90 mm	56 mm	ASTM Grade 2H	ASTM A194	1	98498A213	00000
M64 × 6 mm	100 mm	64 mm	ASTM Grade 2H	ASTM A194	1	98498A122	00000

Low-Strength Steel

Steel—Best for dry environments since moisture will cause these nuts to rust.

	Wd.	Ht.	Specs. Met	Pkg. Qty.		Pkg.
Steel



	1/4"-20	1/2"	15/64"	ASME B18.2.2	100	90498A029	00000
	5/16"-18	9/16"	19/64"	ASME B18.2.2	100	90498A030	0000
	3/8"-16	11/16"	23/64"	ASME B18.2.2	100	90498A031	00000
	7/16"-14	3/4"	27/64"	ASME B18.2.2	50	90498A032	00000
	1/2"-13	7/8"	31/64"	ASME B18.2.2	50	90498A033	00000
	9/16"-12	15/16"	35/64"	ASME B18.2.2, SAE J995	25	90498A345	0000
	5/8"-11	1 1/16"	39/64"	ASME B18.2.2	25	90498A355	00000
	3/4"-10	1 1/4"	47/64"	ASME B18.2.2	25	90498A365	00000
	1"-8	1 5/8"	63/64"	ASME B18.2.2	5	90498A385	00000
	1 1/8"-7	1 13/16"	1 7/64"	ASME B18.2.2	5	90498A395	00000


	1 1/4"-7	2"	1 7/32"	ASME B18.2.2	5	90498A410	00000
	1 3/8"-6	2 3/16"	1 11/32"	ASME B18.2.2	1	90498A042	0000
	1 1/2"-6	2 3/8"	1 15/32"	ASME B18.2.2	1	90498A041	0000
	2"-4 1/2	3 1/8"	1 31/32"	ASME B18.2.2	1	90498A046	00000

Corrosion-Resistant Stainless Steel

18-8 Stainless Steel—The choice for wet and outdoor environments, these nuts resist rust. However, they won't hold up to the harsh chemicals that 316 stainless steel can.

Super-Corrosion-Resistant 316 Stainless Steel—Superior to 18-8 stainless steel, these nuts won't degrade when exposed to harsh weather, salt water, and most chemicals.

	Wd.	Ht.	Pkg. Qty.		Pkg.
18-8 Stainless Steel



	1/4"-20	1/2"	15/64"	100	91849A029	000000
	1/4"-28	1/2"	15/64"	50	91849A128	0000
	5/16"-18	9/16"	19/64"	50	91849A030	0000
	5/16"-24	9/16"	19/64"	25	91849A131	0000
	3/8"-16	11/16"	23/64"	25	91849A625	0000
	3/8"-24	11/16"	23/64"	10	91849A628	0000
	7/16"-14	3/4"	27/64"	10	91849A630	0000
	7/16"-20	3/4"	27/64"	10	91849A655	0000
	1/2"-13	7/8"	31/64"	10	91849A635	0000
	1/2"-20	7/8"	31/64"	5	91849A636	0000


	9/16"-12	15/16"	35/64"	5	91849A637	0000
	5/8"-11	1 1/16"	39/64"	10	91849A640	00000
	5/8"-18	1 1/16"	39/64"	5	91849A660	0000
	3/4"-10	1 1/4"	47/64"	5	91849A645	0000
	3/4"-16	1 1/4"	47/64"	1	91849A665	0000
	7/8"-9	1 7/16"	55/64"	1	91849A650	0000
	1"-8	1 5/8"	63/64"	1	91849A038	0000
	1 1/8"-7	1 13/16"	1 7/64"	1	91849A039	0000
	1 1/4"-7	2"	1 7/32"	1	91849A040	0000
	1 3/8"-6	2 3/16"	1 11/32"	1	91849A042	0000


	1 1/2"-6	2 3/8"	1 15/32"	1	91849A043	00000
	1 3/4"-5	2 3/4"	1 23/32"	1	91849A044	00000


	Super-Corrosion-Resistant 316 Stainless Steel



			1/4"-20	1/2"	15/64"	50	91850A029	00000
			1/4"-28	1/2"	15/64"	25	91850A128	00000
			5/16"-18	9/16"	19/64"	25	91850A185	0000
			5/16"-24	9/16"	19/64"	10	91850A188	0000
			3/8"-16	11/16"	23/64"	10	91850A190	0000
			3/8"-24	11/16"	23/64"	5	91850A193	0000
			7/16"-14	3/4"	27/64"	10	91850A195	0000
			7/16"-20	3/4"	27/64"	5	91850A230	0000
			1/2"-13	7/8"	31/64"	5	91850A210	0000
			1/2"-20	7/8"	31/64"	5	91850A204	00000


			5/8"-11	1 1/16"	39/64"	5	91850A220	0000
			5/8"-18	1 1/16"	39/64"	1	91850A235	0000
			3/4"-10	1 1/4"	47/64"	1	91850A225	0000
			3/4"-16	1 1/4"	47/64"	1	91850A240	0000
			7/8"-9	1 7/16"	55/64"	1	91850A037	0000
			1"-8	1 5/8"	63/64"	1	91850A038	0000
			1 1/8"-7	1 13/16"	1 7/64"	1	91850A039	0000
			1 1/4"-7	2"	1 7/32"	1	91850A040	0000
			1 3/8"-6	2 3/16"	1 11/32"	1	91850A042	00000
			1 1/2"-6	2 3/8"	1 15/32"	1	91850A043	00000


			1 3/4"-5	2 3/4"	1 23/32"	1	91850A046	00000
			2"-4 1/2	3 1/8"	1 31/32"	1	91850A049	00000

Corrosion-Resistant Stainless Steel with Material Certificate

18-8 Stainless Steel—The choice for wet and outdoor environments, these nuts resist rust. However, they won't hold up to the harsh chemicals that 316 stainless steel can.

Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.

	Wd.	Ht.	Pkg. Qty.		Pkg.
18-8 Stainless Steel



	2"-4 1/2	3 1/8"	1 31/32"	1	91849A048	000000

Left-Hand-Thread Hex Nuts

These nuts tighten when turned to the left. Use them with left-hand rods and screws to prevent counterclockwise-moving parts from loosening.

Medium-Strength Steel

Image of Product. Front orientation. Contains Annotated, MultipleImages. Hex Nuts. Left-Hand-Thread Hex Nuts.

These Grade 5 or Class 8 nuts are your go-to for fastening most machinery and equipment. To avoid stripped threads during installation, make sure your screw has a comparable strength rating.

Steel—Best for dry environments since moisture will cause these nuts to rust.

	Wd.	Ht.	Fastener Strength Grade/Class	Pkg. Qty.		Pkg.
Steel



	1/4"-20	7/16"	7/32"	SAE Grade 5	100	95140A111	000000
	1/4"-28	7/16"	7/32"	SAE Grade 5	100	95140A115	00000
	5/16"-18	1/2"	17/64"	SAE Grade 5	50	95140A119	0000
	5/16"-24	1/2"	17/64"	SAE Grade 5	50	95140A123	0000
	3/8"-16	9/16"	21/64"	SAE Grade 5	50	95140A127	00000
	3/8"-24	9/16"	21/64"	SAE Grade 5	50	95140A131	00000
	7/16"-14	11/16"	3/8"	SAE Grade 5	25	95140A135	0000
	7/16"-20	11/16"	3/8"	SAE Grade 5	25	95140A139	0000
	1/2"-13	3/4"	7/16"	SAE Grade 5	25	95140A143	00000
	1/2"-20	3/4"	7/16"	SAE Grade 5	25	95140A147	00000


	9/16"-18	7/8"	31/64"	SAE Grade 5	25	95140A153	00000
	5/8"-11	15/16"	35/64"	SAE Grade 5	10	95140A155	0000
	5/8"-18	15/16"	35/64"	SAE Grade 5	10	95140A159	0000
	3/4"-10	1 1/8"	41/64"	SAE Grade 5	10	95140A163	00000
	3/4"-16	1 1/8"	41/64"	SAE Grade 5	10	95140A165	00000
	7/8"-9	1 5/16"	3/4"	SAE Grade 5	5	95140A167	00000
	7/8"-14	1 5/16"	3/4"	SAE Grade 5	5	95140A169	00000
	1"-8	1 1/2"	55/64"	SAE Grade 5	1	95140A171	0000
	1 1/8"-7	1 11/16"	31/32"	SAE Grade 5	1	95140A175	0000
	1 1/4"-7	1 7/8"	1 1/16"	SAE Grade 5	1	95140A177	0000


	1 1/4"-12	1 7/8"	1 1/16"	SAE Grade 5	1	95140A179	0000
	1 1/2"-6	2 1/4"	1 9/32"	SAE Grade 5	1	95140A181	00000

Low-Strength Steel

Steel—Best for dry environments since moisture will cause these nuts to rust.

	Wd.	Ht.	Fastener Strength Grade/Class	Pkg. Qty.		Pkg.
Steel



	1/4"-20	7/16"	7/32"	SAE Grade 2	100	90519A029	000000
	1/4"-28	7/16"	7/32"	SAE Grade 2	100	90519A205	00000
	3/8"-16	9/16"	21/64"	SAE Grade 2	25	90519A031	0000
	3/8"-24	9/16"	21/64"	SAE Grade 2	50	90519A215	00000
	1/2"-20	3/4"	7/16"	SAE Grade 2	25	90519A235	00000
	5/8"-11	15/16"	35/64"	SAE Grade 2	10	90519A240	00000
	5/8"-18	15/16"	35/64"	SAE Grade 2	10	90519A245	00000
	3/4"-10	1 1/8"	41/64"	SAE Grade 2	5	90519A247	0000
	3/4"-16	1 1/8"	41/64"	SAE Grade 2	10	90519A250	00000
	1"-8	1 1/2"	55/64"	SAE Grade 2	1	90519A257	0000


	1"-14	1 1/2"	55/64"	SAE Grade 2	1	90519A260	0000
	1 1/8"-7	1 11/16"	31/32"	SAE Grade 2	1	90519A039	0000
	1 1/4"-7	1 7/8"	1 1/16"	SAE Grade 2	1	90519A040	00000
	1 1/4"-12	1 7/8"	1 1/16"	SAE Grade 2	1	90519A266	00000
	1 1/2"-6	2 1/4"	1 9/32"	SAE Grade 2	1	90519A041	00000

Corrosion-Resistant Stainless Steel

18-8 Stainless Steel—The choice for wet and outdoor environments, these nuts resist rust. However, they won't hold up to the harsh chemicals that 316 stainless steel can.

Super-Corrosion-Resistant 316 Stainless Steel—Superior to 18-8 stainless steel, these nuts won't degrade when exposed to harsh weather, salt water, and most chemicals.

	Thread Size	Wd.	Ht.	Specs. Met	Pkg. Qty.		Pkg.
18-8 Stainless Steel



		1/4"-20	7/16"	7/32"	—	25	95195A120	000000
		1/4"-28	7/16"	7/32"	—	25	95195A130	00000
		5/16"-18	1/2"	17/64"	—	10	95195A140	0000
		5/16"-24	1/2"	17/64"	—	10	95195A150	0000
		3/8"-16	9/16"	21/64"	—	10	95195A160	0000
		3/8"-24	9/16"	21/64"	—	10	95195A170	0000
		1/2"-13	3/4"	7/16"	—	5	95195A180	0000
		1/2"-20	3/4"	7/16"	—	5	95195A190	0000
		5/8"-11	15/16"	35/64"	—	1	95195A200	0000
		5/8"-18	15/16"	35/64"	—	1	95195A210	0000


		3/4"-10	1 1/8"	41/64"	—	1	95195A220	0000
		3/4"-16	1 1/8"	41/64"	—	1	95195A230	0000
		7/8"-9	1 5/16"	3/4"	—	1	95195A240	0000
		7/8"-14	1 5/16"	3/4"	—	1	95195A245	00000
		1"-8	1 1/2"	55/64"	—	1	95195A250	00000
		1"-14	1 1/2"	55/64"	—	1	95195A260	00000
		1 1/8"-7	1 11/16"	31/32"	—	1	95195A270	00000
		1 1/4"-7	1 7/8"	1 1/16"	—	1	95195A280	00000
		1 1/4"-12	1 7/8"	1 1/16"	—	1	95195A290	00000
		1 1/2"-6	2 1/4"	1 9/32"	—	1	95195A300	00000


		M3 × 0.5 mm	5.5 mm	2.4 mm	DIN 934L	10	93510A105	00000
		M4 × 0.7 mm	7 mm	3.2 mm	DIN 934L	10	93510A110	0000
		M5 × 0.8 mm	8 mm	4 mm	DIN 934L	25	93510A115	00000
		M6 × 1 mm	10 mm	5 mm	DIN 934L	10	93510A120	0000
		M8 × 1.25 mm	13 mm	6.5 mm	DIN 934L	10	93510A125	0000
		M10 × 1.5 mm	17 mm	8 mm	DIN 934L	5	93510A130	0000
		M12 × 1.75 mm	19 mm	10 mm	DIN 934L	5	93510A135	00000
		M14 × 2 mm	22 mm	11 mm	DIN 934L	1	93510A138	0000
		M16 × 2 mm	24 mm	13 mm	DIN 934L	1	93510A140	0000
		M20 × 2.5 mm	30 mm	16 mm	DIN 934L	1	93510A145	0000


		M24 × 3 mm	36 mm	19 mm	DIN 934L	1	93510A155	00000
		M30 × 3.5 mm	46 mm	24 mm	DIN 934L	1	93510A165	00000


		Super-Corrosion-Resistant 316 Stainless Steel



				10-24	5/16"	5/32"	—	1	3022T711	0000
				1/4"-20	7/16"	7/32"	—	1	95355A215	00000
				1/4"-28	7/16"	7/32"	—	1	95355A219	00000
				5/16"-18	1/2"	17/64"	—	1	95355A223	0000
				5/16"-24	1/2"	17/64"	—	1	95355A227	00000
				3/8"-16	9/16"	21/64"	—	1	95355A231	00000
				3/8"-24	9/16"	21/64"	—	1	95355A235	00000
				7/16"-14	11/16"	3/8"	—	1	95355A239	00000
				7/16"-20	11/16"	3/8"	—	1	95355A243	00000
				1/2"-13	3/4"	7/16"	—	1	95355A247	0000


				1/2"-20	3/4"	7/16"	—	1	95355A251	00000
				5/8"-11	15/16"	35/64"	—	1	95355A259	00000
				5/8"-18	15/16"	35/64"	—	1	95355A263	00000
				3/4"-16	1 1/8"	41/64"	—	1	95355A271	00000
				7/8"-9	1 5/16"	3/4"	—	1	95355A275	00000
7/8"-14				1 5/16"	3/4"	—	1	95355A279	00000
1"-8	1 1/2"			55/64"	—	1	95355A281	00000
1"-14	1 1/2"			55/64"	—	1	95355A284	00000
1 1/4"-7	1 7/8"			1 1/16"	—	1	95355A290	00000
1 1/4"-12	1 7/8"			1 1/16"	—	1	95355A293	00000


1 1/2"-6	2 1/4"			1 9/32"	—	1	95355A294	000000

Thin-Heavy-Profile Hex Nuts

About half the height of standard-profile hex nuts and 10% wider, these fit in spaces with low clearance and handle heavier loads by distributing them over a larger area. You can also use them as jam nuts by threading them against another hex nut to hold it in place.

Extreme-Strength Steel

These nuts are about 20% stronger than high-strength steel nuts. To avoid stripped threads during installation, make sure your screw has a comparable strength rating.

Steel—Best for dry environments since moisture will cause these nuts to rust.

	Wd.	Ht.	Fastener Strength Grade/Class	Specs. Met	Pkg. Qty.		Pkg.
Steel



	1/4"-20	1/2"	11/64"	ASTM Grade 2H	ASME B18.2.2, ASTM A194	1	95010A130	00000
	3/8"-16	11/16"	15/64"	ASTM Grade 2H	ASME B18.2.2, ASTM A194	5	95010A140	00000
	7/16"-14	3/4"	17/64"	ASTM Grade 2H	ASME B18.2.2, ASTM A194	1	95010A145	0000
	1/2"-13	7/8"	19/64"	ASTM Grade 2H	ASME B18.2.2, ASTM A194	5	95010A150	00000
	5/8"-11	1 1/16"	23/64"	ASTM Grade 2H	ASME B18.2.2, ASTM A194	1	95010A160	0000
	3/4"-10	1 1/4"	27/64"	ASTM Grade 2H	ASME B18.2.2, ASTM A194	1	95010A165	0000
	7/8"-9	1 7/16"	31/64"	ASTM Grade 2H	ASME B18.2.2, ASTM A194	1	95010A170	0000
	1"-8	1 5/8"	35/64"	ASTM Grade 2H	ASME B18.2.2, ASTM A194	1	95010A175	0000
	1 1/8"-7	1 13/16"	39/64"	ASTM Grade 2H	ASME B18.2.2, ASTM A194	1	95010A180	0000
	1 1/4"-7	2"	23/32"	ASTM Grade 2H	ASME B18.2.2, ASTM A194	1	95010A190	0000


	1 3/8"-6	2 3/16"	25/32"	ASTM Grade 2H	ASME B18.2.2, ASTM A194	1	95010A320	0000
	1 1/2"-6	2 3/8"	27/32"	ASTM Grade 2H	ASME B18.2.2, ASTM A194	1	95010A210	0000
	1 3/4"-5	2 3/4"	31/32"	ASTM Grade 2H	ASME B18.2.2, ASTM A194	1	95010A220	00000
	2"-4 1/2	3 1/8"	1 3/32"	ASTM Grade 2H	ASME B18.2.2, ASTM A194	1	95010A240	00000

Low-Strength Steel

Steel—Best for dry environments since moisture will cause these nuts to rust.

	Wd.	Ht.	Fastener Strength Grade/Class	Pkg. Qty.		Pkg.
Steel



	1/4"-20	1/2"	11/64"	SAE Grade 2	100	90502A029	00000
	5/16"-18	9/16"	13/64"	SAE Grade 2	100	90502A030	0000
	3/8"-16	11/16"	15/64"	SAE Grade 2	100	90502A031	00000
	7/16"-14	3/4"	17/64"	SAE Grade 2	50	90502A032	0000
	1/2"-13	7/8"	19/64"	SAE Grade 2	50	90502A033	00000
	5/8"-11	1 1/16"	23/64"	SAE Grade 2	25	90502A410	00000
	3/4"-10	1 1/4"	27/64"	SAE Grade 2	25	90502A415	00000
	7/8"-9	1 7/16"	31/64"	SAE Grade 2	10	90502A420	00000
	1"-8	1 5/8"	35/64"	SAE Grade 2	10	90502A425	00000
	1 1/8"-7	1 13/16"	39/64"	SAE Grade 2	5	90502A430	00000


	1 1/4"-7	2"	23/32"	SAE Grade 2	5	90502A435	00000
	1 1/2"-6	2 3/8"	27/32"	SAE Grade 2	1	90502A440	0000
	1 3/4"-5	2 3/4"	31/32"	SAE Grade 2	1	90502A044	0000
	2"-4 1/2	3 1/8"	1 3/32"	SAE Grade 2	1	90502A046	00000
	2 1/2"-4	3 7/8"	1 29/64"	SAE Grade 2	1	90502A049	00000

Corrosion-Resistant Stainless Steel

18-8 Stainless Steel—The choice for wet and outdoor environments, these nuts resist rust. However, they won't hold up to the harsh chemicals that 316 stainless steel can.

	Wd.	Ht.	Pkg. Qty.		Pkg.
18-8 Stainless Steel



	1/4"-20	1/2"	11/64"	25	91851A620	00000
	5/16"-18	9/16"	13/64"	20	91851A030	0000
	3/8"-16	11/16"	15/64"	10	91851A630	0000
	1/2"-13	7/8"	19/64"	10	91851A640	00000
	5/8"-11	1 1/16"	23/64"	5	91851A645	00000
	3/4"-10	1 1/4"	27/64"	1	91851A650	0000
	7/8"-9	1 7/16"	31/64"	1	91851A037	0000
	1"-8	1 5/8"	35/64"	1	91851A038	0000
	1 1/8"-7	1 13/16"	39/64"	1	91851A655	0000
	1 1/4"-7	2"	23/32"	1	91851A660	0000


	1 1/2"-6	2 3/8"	27/32"	1	91851A665	00000
	1 3/4"-5	2 3/4"	31/32"	1	91851A670	00000

Heavy-Profile Hex Nuts for High-Pressure Applications

These nuts are hardened, so they maintain their strength under high pressure and temperature. Pair them with ASTM A193 screws to fasten critical components, such as valves and flanges, in pressure tanks, boilers, and heat exchangers. About 10% wider and taller than standard-profile hex nuts, these handle heavier loads by distributing them over a larger area.

High-Strength Steel

Rated Grade 7 or Grade 8, these nuts are about 25% stronger than medium-strength steel nuts. To avoid stripped threads during installation, make sure your screw has a comparable strength rating.

Steel—Best for dry environments since moisture will cause these nuts to rust.

	Wd.	Ht.	Fastener Strength Grade/Class	Specs. Met	Pkg. Qty.		Pkg.
Steel



	1/4"-20	1/2"	15/64"	ASTM Grade 7	ASTM A194	10	94485A121	00000
	3/8"-16	11/16"	23/64"	ASTM Grade 7	ASTM A194	10	94485A029	0000
	1/2"-13	7/8"	31/64"	ASTM Grade 7	ASTM A194	10	94485A033	00000
	5/8"-11	1 1/16"	39/64"	ASTM Grade 7	ASTM A194	10	94485A035	00000
	3/4"-10	1 1/4"	47/64"	ASTM Grade 7	ASTM A194	10	94485A036	00000
	7/8"-9	1 7/16"	55/64"	ASTM Grade 7	ASTM A194	5	94485A037	0000
	1"-8	1 5/8"	63/64"	ASTM Grade 7	ASTM A194	5	94485A038	00000
	1 1/8"-7	1 13/16"	1 7/64"	ASTM Grade 7	ASTM A194	1	94485A041	0000
	1 1/8"-8	1 13/16"	1 7/64"	ASTM Grade 7	ASTM A194	1	94485A111	0000
	1 1/4"-7	2"	1 7/32"	ASTM Grade 7	ASTM A194	1	94485A044	0000


	1 1/4"-8	2"	1 7/32"	ASTM Grade 7	ASTM A194	1	94485A112	0000

Corrosion-Resistant Stainless Steel

18-8 Stainless Steel—The choice for wet and outdoor environments, these nuts resist rust. However, they won't hold up to the harsh chemicals that 316 stainless steel can.

Super-Corrosion-Resistant 316 Stainless Steel—Superior to 18-8 stainless steel, these nuts won't degrade when exposed to harsh weather, salt water, and most chemicals.

	Wd.	Ht.	Fastener Strength Grade/Class	Specs. Met	Pkg. Qty.		Pkg.
18-8 Stainless Steel



	1/4"-28	1/2"	15/64"	ASTM Grade 8	ASTM A194	1	94252A705	000000
	5/16"-24	9/16"	19/64"	ASTM Grade 8	ASTM A194	1	94252A707	00000
	3/8"-24	11/16"	23/64"	ASTM Grade 8	ASTM A194	1	94252A710	00000
	7/16"-14	3/4"	27/64"	ASTM Grade 8	ASTM A194	1	94252A711	00000
	7/16"-20	3/4"	27/64"	ASTM Grade 8	ASTM A194	1	94252A713	00000
	1/2"-20	7/8"	31/64"	ASTM Grade 8	ASTM A194	1	94252A714	00000
	5/8"-18	1 1/16"	39/64"	ASTM Grade 8	ASTM A194	1	94252A716	00000
	3/4"-16	1 1/4"	47/64"	ASTM Grade 8	ASTM A194	1	94252A720	00000
	1"-14	1 5/8"	63/64"	ASTM Grade 8	ASTM A194	1	94252A726	00000


	Super-Corrosion-Resistant 316 Stainless Steel



			1/4"-20	1/2"	1/4"	ASTM Grade 8M	ASTM A194	50	97619A890	0000
			5/16"-18	9/16"	19/64"	ASTM Grade 8M	ASTM A194	10	97619A110	0000
			3/8"-16	11/16"	23/64"	ASTM Grade 8M	ASTM A194	5	97619A220	0000
			7/16"-14	3/4"	27/64"	ASTM Grade 8M	ASTM A194	5	97619A330	0000
			1/2"-13	7/8"	31/64"	ASTM Grade 8M	ASTM A194	5	97619A440	0000
			5/8"-11	1 1/16"	39/64"	ASTM Grade 8M	ASTM A194	1	97619A550	0000
			3/4"-10	1 1/4"	47/64"	ASTM Grade 8M	ASTM A194	1	97619A660	0000
			1"-8	1 5/8"	63/64"	ASTM Grade 8M	ASTM A194	1	97619A880	0000
			1 1/8"-7	1 13/16"	1 9/64"	ASTM Grade 8M	ASTM A194	1	97619A910	0000
			1 1/8"-8	1 13/16"	1 9/64"	ASTM Grade 8M	ASTM A194	1	97619A920	0000


			1 1/4"-7	2"	1 1/4"	ASTM Grade 8M	ASTM A194	1	97619A930	0000
			1 1/4"-8	2"	1 1/4"	ASTM Grade 8M	ASTM A194	1	97619A940	0000
			1 1/2"-8	2 3/8"	1 1/2"	ASTM Grade 8M	ASTM A194	1	97619A960	00000
			1 5/8"-8	2 9/16"	1 5/8"	ASTM Grade 8M	ASTM A194	1	97619A970	00000
			1 3/4"-8	2 3/4"	1 3/4"	ASTM Grade 8M	ASTM A194	1	97619A980	00000

Corrosion-Resistant Stainless Steel with Material Certificate

18-8 Stainless Steel—The choice for wet and outdoor environments, these nuts resist rust. However, they won't hold up to the harsh chemicals that 316 stainless steel can.

Super-Corrosion-Resistant 316 Stainless Steel—Superior to 18-8 stainless steel, these nuts won't degrade when exposed to harsh weather, salt water, and most chemicals.

	Wd.	Ht.	Fastener Strength Grade/Class	Specs. Met	Pkg. Qty.		Pkg.
18-8 Stainless Steel



	1/4"-20	1/2"	15/64"	ASTM Grade 8	ASTM A194	25	94252A703	000000
	5/16"-18	9/16"	19/64"	ASTM Grade 8	ASTM A194	10	94252A706	0000
	3/8"-16	11/16"	23/64"	ASTM Grade 8	ASTM A194	10	94252A709	00000
	1/2"-13	7/8"	31/64"	ASTM Grade 8	ASTM A194	10	94252A712	00000
	5/8"-11	1 1/16"	39/64"	ASTM Grade 8	ASTM A194	5	94252A715	00000
	3/4"-10	1 1/4"	47/64"	ASTM Grade 8	ASTM A194	1	94252A719	0000
	7/8"-9	1 7/16"	55/64"	ASTM Grade 8	ASTM A194	1	94252A722	0000
	1"-8	1 5/8"	63/64"	ASTM Grade 8	ASTM A194	1	94252A725	00000
	1 1/8"-7	1 13/16"	1 7/64"	ASTM Grade 8	ASTM A194	1	94252A730	0000
	1 1/4"-7	2"	1 7/32"	ASTM Grade 8	ASTM A194	1	94252A735	0000


	Super-Corrosion-Resistant 316 Stainless Steel



			7/8"-9	1 7/16"	55/64"	ASTM Grade 8M	ASTM A194	1	97619A770	0000
			1 1/2"-6	2 3/8"	1 1/2"	ASTM Grade 8M	ASTM A194	1	97619A950	00000
			2"-8	3 1/8"	2 1/64"	ASTM Grade 8M	ASTM A194	1	97619A990	00000

Hex Nut Assortments

With a range of sizes on hand, you can use these assortments to fasten a variety of machinery and equipment.

18-8 Stainless Steel—The choice for wet and outdoor environments, these nuts resist rust. However, they won't hold up to the harsh chemicals that 316 stainless steel can.

	No. of Pieces	Specs. Met	Container Type		Each
18-8 Stainless Steel



	1/4"-20 to 3/4"-10	90	—	Plastic Box	93608A200	000000
	2-56 to 1/4"-20	700	—	Plastic Box	90625A207	00000
	M2 to M12	600	DIN 934	Plastic Box	98185A414	000000

Mil. Spec. Narrow-Profile Hex Nuts

These nuts are manufactured and tested to strict U.S. military standards for material and construction. They are about 20% narrower to fit in tight spots where standard-profile nuts won't fit. Also known as small-pattern hex nuts.

Corrosion-Resistant Stainless Steel

18-8 Stainless Steel—The choice for wet and outdoor environments, these nuts resist rust. However, they won't hold up to the harsh chemicals that 316 stainless steel can.

	Wd.	Ht.	Specs. Met	Pkg. Qty.		Pkg.
18-8 Stainless Steel



	0-80	1/8"	3/64"	Fed. Spec. FF-N-836, NAS671C0	10	91834A106	000000
	2-56	5/32"	1/16"	Fed. Spec. FF-N-836, NAS671C2	10	91834A101	00000
	4-40	3/16"	1/16"	Fed. Spec. FF-N-836, NAS671C4	10	91834A102	00000
	6-32	1/4"	3/32"	Fed. Spec. FF-N-836, NAS671C6	10	91834A103	00000
	8-32	5/16"	7/64"	Fed. Spec. FF-N-836, NAS671C8	10	91834A104	00000
	10-32	11/32"	1/8"	Fed. Spec. FF-N-836, NAS671C10	5	91834A105	00000

Hex Nuts for High-Pressure Applications

Corrosion-Resistant Stainless Steel

Super-Corrosion-Resistant 316 Stainless Steel—Superior to 18-8 stainless steel, these nuts won't degrade when exposed to harsh weather, salt water, and most chemicals.

	Wd.	Ht.	Fastener Strength Grade/Class	Specs. Met	Pkg. Qty.		Pkg.
Super-Corrosion-Resistant 316 Stainless Steel



	5/16"-18	1/2"	17/64"	ASTM Grade 8M	ASTM A194	5	95005A125	000000
	3/8"-16	9/16"	21/64"	ASTM Grade 8M	ASTM A194	1	95005A130	0000
	1/2"-13	3/4"	7/16"	ASTM Grade 8M	ASTM A194	1	95005A135	0000
	5/8"-11	15/16"	35/64"	ASTM Grade 8M	ASTM A194	1	95005A140	0000
	3/4"-10	1 1/8"	41/64"	ASTM Grade 8M	ASTM A194	1	95005A145	00000
	1"-8	1 1/2"	55/64"	ASTM Grade 8M	ASTM A194	1	95005A150	00000

High-Profile Hex Nuts

Slightly taller than standard-profile hex nuts, these have a larger gripping area so your wrench or socket won't slip off as you tighten them. They're often used in vehicles and machinery where fasteners can be difficult to reach.

High-Strength Steel

Steel—Best for dry environments since moisture will cause these nuts to rust.

	Wd.	Ht.	Fastener Strength Grade/Class	Specs. Met	Pkg. Qty.		Pkg.
Steel



	3/8"-16	9/16"	17/32"	SAE Grade 8	SAE J995	1	90565A120	00000
	3/8"-24	9/16"	17/32"	SAE Grade 8	SAE J995	1	90565A360	00000
	7/16"-20	5/8"	39/64"	SAE Grade 8	SAE J995	25	90565A325	00000
	1/2"-13	3/4"	11/16"	SAE Grade 8	SAE J995	1	90565A140	0000
	1/2"-20	3/4"	11/16"	SAE Grade 8	SAE J995	25	90565A330	00000
	9/16"-18	7/8"	49/64"	SAE Grade 8	SAE J995	10	90565A333	0000
	5/8"-11	15/16"	27/32"	SAE Grade 8	SAE J995	1	90565A160	0000
	5/8"-18	15/16"	27/32"	SAE Grade 8	SAE J995	10	90565A335	00000
	3/4"-10	1 1/16"	1"	SAE Grade 8	SAE J995	1	90565A180	00000
	3/4"-16	1 1/8"	1"	SAE Grade 8	SAE J995	10	90565A340	00000


	7/8"-14	1 5/16"	1 5/32"	SAE Grade 8	SAE J995	5	90565A345	00000
	1"-8	1 1/2"	1 5/16"	SAE Grade 8	SAE J995	1	90565A220	00000
	1"-14	1 7/16"	1 5/16"	SAE Grade 8	SAE J995	5	90565A350	00000
	1 1/4"-12	1 13/16"	1 5/8"	SAE Grade 8	SAE J995	1	90565A355	00000
	1 1/2"-12	2 3/16"	2"	SAE Grade 8	SAE J995	1	90565A061	00000

Corrosion-Resistant Stainless Steel

18-8 Stainless Steel—The choice for wet and outdoor environments, these nuts resist rust. However, they won't hold up to the harsh chemicals that 316 stainless steel can.

	Wd.	Ht.	Pkg. Qty.		Pkg.
18-8 Stainless Steel



	1/4"-20	7/16"	11/32"	1	91763A110	00000
	5/16"-18	1/2"	21/64"	1	91763A210	0000
	3/8"-16	9/16"	17/32"	1	91763A310	0000
	1/2"-13	3/4"	11/16"	1	91763A410	0000

JIS Hex Nuts

Fasten parts and components that are made to Japanese Industrial Standards.

Corrosion-Resistant Stainless Steel

18-8 Stainless Steel—The choice for wet and outdoor environments, these nuts resist rust. However, they won't hold up to the harsh chemicals that 316 stainless steel can.

	Wd., mm	Ht., mm	JIS Specification	Pkg. Qty.		Pkg.
18-8 Stainless Steel



	M3 × 0.5 mm	5.5	2.4	JIS B 1181	50	91028A652	000000
	M4 × 0.7 mm	7	3.2	JIS B 1181	50	91028A655	00000
	M5 × 0.8 mm	8	4	JIS B 1181	50	91028A658	00000
	M6 × 1 mm	10	5	JIS B 1181	25	91028A661	00000
	M8 × 1.25 mm	12	6.5	JIS B 1181	10	91028A664	00000
	M10 × 1.25 mm	14	8	JIS B 1181	5	91028A667	00000
	M12 × 1.75 mm	17	7	JIS B 1181	1	91028A711	00000
	M14 × 2 mm	19	8	JIS B 1181	1	91028A712	00000
	M16 × 2 mm	22	10	JIS B 1181	1	91028A713	00000
	M18 × 2.5 mm	24	11	JIS B 1181	1	91028A714	00000


	M20 × 2.5 mm	27	12	JIS B 1181	1	91028A715	00000
	M22 × 2.5 mm	30	13	JIS B 1181	1	91028A716	00000

Mil. Spec. Thin-Profile Hex Nuts

These nuts are manufactured and tested to strict U.S. military standards for material and construction. About half the height of standard-profile nuts, they fit in spaces with low clearance. You can also use them as jam nuts by threading them against another hex nut to hold it in place.

Corrosion-Resistant Stainless Steel

18-8 Stainless Steel—The choice for wet and outdoor environments, these nuts resist rust. However, they won't hold up to the harsh chemicals that 316 stainless steel can.

	Wd.	Ht.	Mil. Spec.	Specs. Met	Pkg. Qty.		Pkg.
18-8 Stainless Steel



	1/4"-20	7/16"	5/32"	MS35691-3	Fed. Spec. FF-N-836	5	92101A210	000000
	1/4"-28	7/16"	5/32"	MS35691-7	Fed. Spec. FF-N-836	1	92101A320	0000
	5/16"-18	1/2"	3/16"	MS35691-11	Fed. Spec. FF-N-836	5	92101A430	00000
	5/16"-24	1/2"	3/16"	MS35691-15	Fed. Spec. FF-N-836	5	92101A540	00000
	3/8"-16	9/16"	7/32"	MS35691-19	Fed. Spec. FF-N-836	1	92101A650	0000
	3/8"-24	9/16"	7/32"	MS35691-23	Fed. Spec. FF-N-836	1	92101A760	0000
	7/16"-14	11/16"	1/4"	MS35691-27	Fed. Spec. FF-N-836	1	92101A101	0000
	7/16"-20	11/16"	1/4"	MS35691-31	Fed. Spec. FF-N-836	1	92101A102	0000
	1/2"-13	3/4"	5/16"	MS35691-35	Fed. Spec. FF-N-836	1	92101A870	0000
	1/2"-20	3/4"	5/16"	MS35691-39	Fed. Spec. FF-N-836	1	92101A980	0000


	5/8"-11	15/16"	3/8"	MS35691-51	Fed. Spec. FF-N-836	1	92101A103	00000
	5/8"-18	15/16"	3/8"	MS35691-55	Fed. Spec. FF-N-836	1	92101A104	00000

Left-Hand-Thread Heavy-Profile Hex Nuts

These nuts tighten when turned to the left. Use them with left-hand rods and screws to prevent counterclockwise-moving parts from loosening. About 10% wider and taller than standard-profile hex nuts, these handle heavier loads by distributing them over a larger area.

Medium-Strength Steel

These Grade 5 or Class 8 nuts are your go-to for fastening most machinery and equipment. To avoid stripped threads during installation, make sure your screw has a comparable strength rating.

Steel—Best for dry environments since moisture will cause these nuts to rust.

	Wd.	Ht.	Fastener Strength Grade/Class	Pkg. Qty.		Pkg.
Steel



	1/4"-20	1/2"	15/64"	SAE Grade 5	25	90570A710	00000
	3/8"-16	11/16"	23/64"	SAE Grade 5	10	90570A720	0000
	1/2"-13	7/8"	31/64"	SAE Grade 5	10	90570A725	00000
	5/8"-11	1 1/16"	39/64"	SAE Grade 5	5	90570A730	0000
	3/4"-10	1 1/4"	47/64"	SAE Grade 5	5	90570A735	00000
	1"-8	1 5/8"	63/64"	SAE Grade 5	1	90570A038	0000