End Angle End Angle |
|---|
 |
| Offset |
 |
| U-Shaped |
 |
| Gooseneck |
 |
| Deep Offset |
 |
| Straight |
Overall Length Overall Length |
|---|
End Style End Style |
|---|
|
|
End Width End Width |
|---|
|
|
|
End Finish End Finish |
|---|
|
Electrical Properties Electrical Properties |
|---|
|
Specifications Met Specifications Met |
|---|
|
Nail-Pulling Pry Bars
The claw-shaped end grips and extracts nails, tacks, and brads. Also known as claw bars.
Style A are also known as bear claws.
Style B are often used for stripping and removing wooden concrete forms after concrete has set.
Style G has a handle arch that allows more swing during pulling and prying without the need to use a block for leverage.
Style H are also known as crow bars.
Bar | ||||||||
|---|---|---|---|---|---|---|---|---|
| Overall Lg. | Weight | Size | Shape | End Wd. | Number of Nail Slots | Material | Each | |
| 7 3/4" | 11 oz. | 3/8" | Flat | 5/8" × 5/8" | 2 | Painted Steel | 00000000 | 000000 |
| 10 1/2" | 14 oz. | 1/2" | Flat | 13/16" × 13/16" | 2 | Painted Steel | 00000000 | 00000 |
| 11 3/4" | 1 1/8 lbs. | 1/2" | Flat | 7/8" × 7/8" | 2 | Painted Steel | 00000000 | 00000 |
| 14 1/4" | 1 5/8 lbs. | 5/8" | Flat | 1" × 1" | 2 | Painted Steel | 00000000 | 00000 |
 |  Chisel End |
Claw End |
Bar | ||||||||
|---|---|---|---|---|---|---|---|---|
| Overall Lg. | Weight | Size | Shape | End Wd. | Number of Nail Slots | Material | Each | |
| 18" | 1 3/8 lbs. | 3/8" | I-Beam | 1 3/4" × 1 3/8" | 3 | Painted Steel | 0000000 | 000000 |
Bar | ||||||||
|---|---|---|---|---|---|---|---|---|
| Overall Lg. | Weight | Size | Shape | End Wd. | Number of Nail Slots | Material | Each | |
| 18" | 2 1/2 lbs. | 3/4" | Hex | 1 7/8" × 1 3/8" | 3 | Painted Steel | 000000 | 000000 |
Bar | ||||||||
|---|---|---|---|---|---|---|---|---|
| Overall Lg. | Weight | Size | Shape | End Wd. | Number of Nail Slots | Material | Each | |
| 15 1/2" | 1 3/4 lbs. | 1 3/8" | Flat | 1 3/4" × 1 3/4" | 3 | Painted Steel | 0000000 | 000000 |
Bar | ||||||||
|---|---|---|---|---|---|---|---|---|
| Overall Lg. | Weight | Size | Shape | End Wd. | Number of Nail Slots | Material | Each | |
| 12" | 1 lbs. | 9/16" | Hex | 1 7/16" × 1" | 1 | Painted Steel | 0000000 | 00000 |
| 18" | 2 lbs. | 11/16" | Hex | 1 7/16" × 1" | 1 | Painted Steel | 0000000 | 00000 |
| 24" | 3 1/2 lbs. | 3/4" | Hex | 1 3/8" × 1" | 1 | Painted Steel | 0000000 | 00000 |
| 30" | 4 1/4 lbs. | 3/4" | Hex | 1 3/8" × 1" | 1 | Painted Steel | 0000000 | 00000 |
| 36" | 4 1/4 lbs. | 11/16" | Hex | 1 3/8" × 1" | 1 | Painted Steel | 0000000 | 00000 |
| 36" | 8 1/2 lbs. | 1" | Hex | 2 1/4" × 1 1/2" | 1 | Painted Steel | 000000 | 00000 |
| 42" | 9 lbs. | 7/8" | Hex | 1 5/8" × 1 1/8" | 1 | Painted Steel | 000000 | 00000 |
| 48" | 12 1/2 lbs. | 1" | Hex | 2 1/8" × 1 5/8" | 1 | Painted Steel | 0000000 | 00000 |
| 60" | 15 1/2 lbs. | 1" | Hex | 2 1/4" × 1 1/2" | 1 | Painted Steel | 000000 | 00000 |
Jaw-Style Nail-Pulling Pry Bars
Remove deeply embedded nails. The lower handle on these bars opens and closes the jaws for a good grip on the nail head and gives you extra leverage.
| Overall Lg. | Max. Jaw Capacity | Weight, lbs. | Bar Shape | Number of Nail Slots | Material | Handle Material | Features | Each | |
Straight Jaw End | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| 17 3/4" | 1/2" | 5 1/2 | Flat | 1 | Black-Oxide Steel | Iron | Cushion-Grip Handle | 0000000 | 000000 |
Screwdriver-Style Nail-Pulling Pry Bars
The claw-shaped end grips and extracts nails, tacks, and brads while the plastic handle provides a comfortable grip.
Bar | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| Overall Lg. | Shaft Lg. | Weight, oz. | Size | Shape | End Wd. | Number of Nail Slots | Material | Each | |
Offset Claw End | |||||||||
| 7 1/4" | 3 3/4" | 2 | 1/4" | Round | 7/16" | 1 | Nickel-Plated Steel | 0000000 | 00000 |
Pry Bars
Style L are good for separating die sets. Also known as die bars.
Pry bars with offset and gooseneck ends give you more leverage than straight ends.
Screwdriver-Style Pry Bar Sets
The plastic handle provides a comfortable grip. The end is tapered on both sides of the bar.
Bar | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Number of Pieces | End Style | Overall Lg. | Shaft Lg. | Weight | Size | Shape | End Wd. | Material | Each | |
| 3 | Offset Wedge | 12" 17" 25" | 7" 12" 18" | 6 oz. 8 oz. 1 1/2 lbs. | 3/8" 3/8" 1/2" | Flat Flat Flat | 5/8" 5/8" 3/4" | Black-Oxide Steel | 0000000 | 000000 |
Screwdriver-Style Pry Bars
The plastic handle provides a comfortable grip. The end is tapered on both sides of the bar.
Pry bars 36" and longer have a cap on the end of the handle that lets you strike it without damage.
Bar | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| Overall Lg. | Shaft Lg. | Weight | Size | Shape | End Wd. | Material | Features | Each | |
Offset Wedge End | |||||||||
| 12" | 7" | 6 oz. | 3/8" | Flat | 5/8" | Black-Oxide Steel | __ | 00000000 | 000000 |
| 17" | 12" | 8 oz. | 3/8" | Flat | 5/8" | Black-Oxide Steel | __ | 00000000 | 00000 |
| 25" | 18" | 1 1/2 lbs. | 1/2" | Flat | 3/4" | Black-Oxide Steel | __ | 00000000 | 00000 |
| 31" | 24" | 2 lbs. | 1/2" | Flat | 3/4" | Black-Oxide Steel | __ | 00000000 | 00000 |
| 36" | 29" | 4 lbs. | 5/8" | Flat | 1" | Black-Oxide Steel | Striking Cap | 00000000 | 00000 |
| 42" | 35" | 5 1/2 lbs. | 5/8" | Flat | 1" | Black-Oxide Steel | Striking Cap | 00000000 | 00000 |
| 48" | 38" | 7 1/2 lbs. | 3/4" | Flat | 1" | Black-Oxide Steel | Striking Cap | 00000000 | 000000 |
Nonmarring Pry Bars
The gooseneck end of these pry bars is aluminum-bronze coated to prevent scratching. Often used to separate die blocks, they're also known as die bars.
Miniature Pry Bars
Lift and pry small objects, such as electronic and circuit board-mounted components. These tools have a static-dissipative handle that drains static from your application, preventing buildup from electrostatic discharge (ESD) that can damage sensitive equipment. They are also known as chip lifters.
Bar | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Overall Lg. | Wt., oz. | Shaft Lg. | Size | Shape | End Wd. | Material | Handle Material | Surface Resistivity, ohms | Each | |
Offset Claw End | ||||||||||
| 5 3/4" | 1 | 2" | 1/8" | Flat | 1/8" | Chrome-Plated Steel | Plastic | 106-109 | 0000000 | 00000 |
Electrical-Insulating Pry Bars
An insulated handle protects against shock from accidental contact with live electrical circuits. These tools are tested to 1,000 volts to meet IEC 60900 and ASTM F1505. The end is tapered on both sides of the bar.
Bar | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Overall Lg. | Shaft Lg. | Weight, lbs. | Size | Shape | End Wd. | Material | Handle Material | Specifications Met | Each | |
Offset Wedge End | ||||||||||
| 36" | 8 3/4" | 8 | 1 3/8" | Round | 1" | Black-Oxide Steel | Plastic | IEC 60900, ASTM F1505 | 0000000 | 0000000 |
Forked Wedges
Like the claw end of a hammer around a nail, these wedges grip studs or rods from both sides to give you leverage for prying apart two joined components. They’re often used to separate ball joints and tie rod ends in suspension and steering systems. Strike the wide, flat base with a hammer until the forked end pries apart the joint. Also known as pickle forks.