McMaster-Carr logo
    Filter by
    Spring Type
    Number of Turns
    Shaft Diameter
    DFARS Specialty Metals
    Number of Mounting Holes
    Export Control Classification Number (ECCN)
    Industrial Info Snippet
    U.S.–Mexico–Canada Agreement (USMCA) Qualifying
    Housing Material
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Comments
    E-mail address (if you would like a response)
    110 Products

    Rotor Springs

    Image of Product. Front orientation. Rotor Springs.
    Wind these springs to store power, then release them to create rotary motion—similar to winding a wristwatch. Also known as clock springs and power springs. All are stainless steel for corrosion resistance.
    Max. Torque,
    in·lbf
    For Shaft
    Dia.
    OD
    Wd.
    Thk.
    No. of
    Turns
    Material
    Each
    0.411/4"1.5"0.5"0.004"44301 Stainless Steel
    1842N10000000
    0.731/4"1"0.25"0.0075"11.5301 Stainless Steel
    1842N2000000
    0.931/4"1.5"0.5"0.006"30301 Stainless Steel
    1842N3000000
    1.651/4"1.5"0.5"0.008"22301 Stainless Steel
    1842N4000000
    2.581/4"1.5"0.5"0.01"17301 Stainless Steel
    1842N5000000
    4.25/8"2.8"0.25"0.018"14301 Stainless Steel
    1842N6000000
    4.321/4"1.5"0.5"0.013"11.5301 Stainless Steel
    1842N7000000
    4.51/4"1.8"0.375"0.016"12301 Stainless Steel
    1842N8000000
    71/4"1.8"0.375"0.02"9301 Stainless Steel
    1842N9000000
    8.35/8"3"0.5"0.018"16.5301 Stainless Steel
    1842N11000000

    Constant-Force Strip Springs

    Image of Product. Front orientation. Strip Springs. Constant-Force Strip Springs.
    No matter how far you extend them, these springs pull back with the same amount of force. Compact and tightly coiled, these springs extend to multiple times their length to pull objects in a linear direction. All are stainless steel for corrosion resistance. Please allow for 1 ½ coils on the shaft at full extension to hold the spring in place.
    Extended
    Lg.
    Load,
    lb.
    Wt. Load Tolerance,
    lb.
    Thk.
    Wd.
    ID
    ID Tolerance
    OD
    OD Tolerance
    Mounting
    Hole Dia.
    No. of Mounting
    Holes
    Material
    Each
    3,000 Cycle Useful Life
    12"0.37-0.04 to 0.040.003"0.187"0.21"-0.03" to 0.03"0.3"-0.03" to 0.03"0.096"1301 Stainless Steel
    9293K11100000
    12"1.23-0.12 to 0.120.005"0.375"0.38"0.47"0.131"1301 Stainless Steel
    9293K2540000
    15"0.49-0.05 to 0.050.004"0.187"0.29"-0.03" to 0.03"0.4"-0.04" to 0.04"0.096"1301 Stainless Steel
    9293K1120000
    15"0.66-0.07 to 0.070.004"0.25"0.28"-0.03" to 0.03"0.4"-0.04" to 0.04"0.13"1301 Stainless Steel
    9293K420000
    15"0.83-0.09 to 0.090.004"0.312"0.28"-0.03" to 0.03"0.4"-0.04" to 0.04"0.13"1301 Stainless Steel
    9293K1130000
    17"1.03-0.11 to 0.110.005"0.312"0.37"-0.04" to 0.04"0.5"-0.05" to 0.05"0.13"1301 Stainless Steel
    9293K440000
    18"0.75-0.08 to 0.080.005"0.31"0.42"-0.05" to 0.05"0.56"-0.06" to 0.06"0.131"1301 Stainless Steel
    9293K13200000
    22"1.12-0.12 to 0.120.006"0.37"0.51"-0.06" to 0.06"0.62"-0.07" to 0.07"0.131"1301 Stainless Steel
    9293K4600000
    22"2.3-0.23 to 0.230.007"0.5"0.5"0.7"0.191"1301 Stainless Steel
    9293K2630000
    22"2.87-0.28 to 0.280.007"0.625"0.5"0.71"0.191"1301 Stainless Steel
    9293K2950000
    24"1.48-0.15 to 0.150.006"0.375"0.45"-0.05" to 0.05"0.62"-0.07" to 0.07"0.196"1301 Stainless Steel
    9293K1140000
    24"4-0.4 to 0.400.009"0.75"0.62"-0.07" to 0.07"0.82"-0.09" to 0.09"0.196"1301 Stainless Steel
    9293K11700000
    24"4.93-0.49 to 0.490.012"0.625"0.86"1.11"0.191"1301 Stainless Steel
    9293K3370000
    25"1.97-0.2 to 0.200.006"0.5"0.45"-0.05" to 0.05"0.65"-0.07" to 0.07"0.196"1301 Stainless Steel
    9293K1150000
    26"1.62-0.17 to 0.170.007"0.5"0.59"-0.06" to 0.06"0.75"-0.08" to 0.08"0.131"1301 Stainless Steel
    9293K4800000
    28"6.88-0.69 to 0.690.014"0.75"1"1.29"0.191"1301 Stainless Steel
    9293K3490000
    28"9.19-0.92 to 0.920.014"1"1.1"1.31"0.191"1301 Stainless Steel
    9293K4430000
    30"2.63-0.27 to 0.270.008"0.5"0.59"-0.06" to 0.06"0.82"-0.09" to 0.09"0.196"1301 Stainless Steel
    9293K520000
    30"3.29-0.33 to 0.330.008"0.625"0.61"-0.07" to 0.07"0.83"-0.09" to 0.09"0.196"1301 Stainless Steel
    9293K1160000
    32"14.76-1.5 to 1.500.018"1.25"1.28"1.65"0.191"1301 Stainless Steel
    9293K4670000
    32"17.71-1.7 to 1.700.018"1.5"1.38"1.64"0.256"2301 Stainless Steel
    9293K5620000
    33"4.12-0.42 to 0.420.01"0.625"0.73"-0.08" to 0.08"0.99"-0.1" to 0.10"0.196"1301 Stainless Steel
    9293K540000
    33"4.95-0.5 to 0.500.01"0.75"0.71"-0.08" to 0.08"0.97"-0.1" to 0.10"0.196"1301 Stainless Steel
    9293K11800000
    34"3.5-0.35 to 0.350.01"0.68"0.85"-0.09" to 0.09"1.12"-0.12" to 0.12"0.187"1301 Stainless Steel
    9293K13300000
    36"28.71-2.87 to 2.870.025"1.75"1.88"2.16"0.256"2301 Stainless Steel
    9293K6900000
    36"32.81-3.28 to 3.280.025"2"1.78"2.11"0.256"2301 Stainless Steel
    9293K69800000
    38"5-0.5 to 0.500.012"0.81"1.02"-0.11" to 0.11"1.4"-0.14" to 0.14"0.187"1301 Stainless Steel
    9293K13400000
    39"5.94-0.6 to 0.600.012"0.75"0.88"-0.09" to 0.09"1.19"-0.12" to 0.12"0.196"1301 Stainless Steel
    9293K5600000
    39"7.92-0.8 to 0.800.012"1"0.88"-0.09" to 0.09"1.2"-0.12" to 0.12"0.196"1301 Stainless Steel
    9293K11900000
    40"10.6-1.06 to 1.060.016"1"1.2"-0.12" to 0.12"1.52"-0.16" to 0.16"0.196"1301 Stainless Steel
    9293K1200000
    43"7-0.7 to 0.700.014"1"1.19"-0.12" to 0.12"1.5"-0.15" to 0.15"0.187"1301 Stainless Steel
    9293K5800000
    50"16.5-1.65 to 1.650.02"1.25"1.47"-0.15" to 0.15"1.89"-0.19" to 0.19"0.196"1301 Stainless Steel
    9293K12100000
    52"24.8-2.48 to 2.480.025"1.5"1.77"-0.18" to 0.18"2.23"-0.23" to 0.23"0.265"2301 Stainless Steel
    9293K1300000
    52"33-0.33 to 0.330.025"2"1.78"-0.18" to 0.18"2.22"-0.22" to 0.22"0.265"2301 Stainless Steel
    9293K13100000
    60"40.9-4.09 to 4.090.031"2"2.5"-0.25" to 0.25"3.03"-0.31" to 0.31"0.265"2301 Stainless Steel
    9293K1400000
     
    25,000 Cycle Useful Life
    18"0.23-0.03 to 0.030.004"0.25"0.53"-0.06" to 0.06"0.62"-0.07" to 0.07"0.13"1301 Stainless Steel
    9293K1220000
    18"0.36-0.04 to 0.040.005"0.312"0.69"-0.07" to 0.07"0.78"-0.08" to 0.08"0.13"1301 Stainless Steel
    9293K1230000
    25"0.43-0.05 to 0.050.005"0.375"0.65"-0.07" to 0.07"0.78"-0.08" to 0.08"0.13"1301 Stainless Steel
    9293K1240000
    25"0.52-0.06 to 0.060.006"0.375"0.7"-0.07" to 0.07"0.9"-0.09" to 0.09"0.196"1301 Stainless Steel
    9293K1250000
    25"0.7-0.07 to 0.070.006"0.5"0.8"-0.08" to 0.08"0.92"-0.1" to 0.10"0.196"1301 Stainless Steel
    9293K170000
    33"0.93-0.1 to 0.100.008"0.5"1.07"-0.11" to 0.11"1.23"-0.13" to 0.13"0.196"1301 Stainless Steel
    9293K180000
    35"1.46-0.15 to 0.150.01"0.625"1.36"-0.14" to 0.14"1.53"-0.16" to 0.16"0.196"1301 Stainless Steel
    9293K190000
    45"2.09-0.21 to 0.210.012"0.75"1.6"-0.16" to 0.16"1.82"-0.19" to 0.19"0.196"1301 Stainless Steel
    9293K2100000
    45"2.8-0.28 to 0.280.012"1"1.6"-0.16" to 0.16"1.84"-0.19" to 0.19"0.196"1301 Stainless Steel
    9293K12600000
    46"4.1-0.41 to 0.410.016"1"1.96"-0.2" to 0.20"2.21"-0.23" to 0.23"0.196"1301 Stainless Steel
    9293K2200000
    48"3.5-0.35 to 0.350.015"1"1.96"-0.2" to 0.20"2.2"-0.22" to 0.22"0.196"1301 Stainless Steel
    9293K12700000
    48"3.86-0.39 to 0.390.016"1.25"2.28"2.52"0.191"1301 Stainless Steel
    9293K76300000
    48"4.37-0.44 to 0.440.015"1.25"2.03"-0.21" to 0.21"2.29"-0.23" to 0.23"0.196"1301 Stainless Steel
    9293K12800000
    48"5.21-0.52 to 0.520.018"1.5"2.65"2.86"0.256"2301 Stainless Steel
    9293K76800000
    55"5.83-0.59 to 0.590.02"1.25"2.53"-0.26" to 0.26"2.82"-0.29" to 0.29"0.196"1301 Stainless Steel
    9293K2300000
    56"7.24-0.72 to 0.720.025"1.5"3.54"3.75"0.256"2301 Stainless Steel
    9293K90500000
    60"8.74-0.88 to 0.880.025"1.5"3.35"-0.34" to 0.34"3.7"-0.37" to 0.37"0.265"2301 Stainless Steel
    9293K2400000
    60"11.7-1.17 to 1.170.025"2"3.37"-0.34" to 0.34"3.68"-0.37" to 0.37"0.265"2301 Stainless Steel
    9293K12900000
    70"14.4-1.44 to 1.440.031"2"4.35"-0.44" to 0.44"4.74"-0.48" to 0.48"0.265"2301 Stainless Steel
    9293K2500000
     
    50,000 Cycle Useful Life
    30"0.44-0.07 to 0.070.006"0.5"1"-0.1" to 0.10"1.22"-0.13" to 0.13"0.196"1301 Stainless Steel
    9293K280000
    36"0.58-0.09 to 0.090.008"0.5"1.49"-0.15" to 0.15"1.61"-0.17" to 0.17"0.196"1301 Stainless Steel
    9293K290000
    50"1.31-0.2 to 0.200.012"0.75"2.24"-0.23" to 0.23"2.4"-0.24" to 0.24"0.196"1301 Stainless Steel
    9293K3200000
     

    Constant-Force Retractors

    Image of Product. Front orientation. Constant-Force Retractors. Right Cable Exit.
    Image of Product. Front orientation. Constant-Force Retractors. Left Cable Exit.

    Right Cable Exit

    Left Cable Exit

    For controlled extension and retraction, these retractors provide the same amount of force no matter how far you extend them. The flexible attachment cable allows a wider range of movement than standard constant-force springs.
    Cable
    Spring
    Housing
    Storage
    Drums
    Mounting
    Holes
    Tension,
    lb.
    Travel,
    ft.
    Dia.
    Material
    Torque,
    in·lbf
    Material
    Ht.
    Wd.
    Dp.
    Material
    No.
    of
    Material
    Mounting Fasteners
    Included
    Dia.
    No.
    of
    Each
    Right Cable Exit
    0.37531/16"Nylon
    0.10Stainless Steel
    1 1/2"1"1/2"Stainless Steel
    1Nylon
    61115A10000000
    161/16"Stainless Steel
    0.78Stainless Steel
    3 3/4"2 1/2"1 1/4"Zinc-Plated Steel1Acetal
    No11/64"461115A2000000
    261/16"Stainless Steel
    1.56Stainless Steel
    3 3/4"2 1/2"1 1/4"Zinc-Plated Steel1Acetal
    No11/64"461115A3000000
    361/16"Stainless Steel
    2.33Stainless Steel
    3 3/4"2 1/2"1 1/4"Zinc-Plated Steel2Acetal
    No11/64"461115A4000000
    3223/64"Steel3.63Stainless Steel
    6 1/4"3 1/4"2 1/4"Zinc-Plated Steel1Acetal
    No11/64"661115A111000000
    461/16"Stainless Steel
    3.12Stainless Steel
    3 3/4"2 1/2"1 1/4"Zinc-Plated Steel2Acetal
    No11/64"461115A5000000
    561/16"Stainless Steel
    3.90Stainless Steel
    3 3/4"2 1/2"1 1/4"Zinc-Plated Steel2Acetal
    No11/64"461115A6000000
    5193/64"Steel5.62Stainless Steel
    6 1/4"3 1/4"2 1/4"Zinc-Plated Steel1Acetal
    No11/64"661115A113000000
    7.533/64"Steel6.65Stainless Steel
    5 1/4"2 3/4"2 1/4"Zinc-Plated Steel1Acetal
    No11/64"661115A115000000
    7.5173/64"Steel8.06Stainless Steel
    6 1/4"3 1/4"2 1/4"Zinc-Plated Steel1Acetal
    No11/64"661115A117000000
    1033/64"Steel7.95Stainless Steel
    5 1/4"2 3/4"2 1/4"Zinc-Plated Steel1Acetal
    No11/64"661115A119000000
    10153/64"Steel10.60Stainless Steel
    6 1/4"3 1/4"2 1/4"Zinc-Plated Steel1Acetal
    No11/64"661115A122000000
    13.5133/64"Steel13.90Stainless Steel
    6 1/4"3 1/4"2 1/4"Zinc-Plated Steel1Acetal
    No11/64"661115A124000000
    1523/64"Steel11.90Stainless Steel
    5 1/4"2 3/4"2 1/4"Zinc-Plated Steel1Acetal
    No11/64"661115A126000000
    15133/64"Steel15.50Stainless Steel
    6 1/4"3 1/4"2 1/4"Zinc-Plated Steel1Acetal
    No11/64"661115A128000000
     
    Left Cable Exit
    3223/64"Steel3.63Stainless Steel
    6 1/4"3 1/4"2 1/4"Zinc-Plated Steel1Acetal
    No11/64"661115A112000000
    5193/64"Steel5.62Stainless Steel
    6 1/4"3 1/4"2 1/4"Zinc-Plated Steel1Acetal
    No11/64"661115A114000000
    7.5173/64"Steel8.06Stainless Steel
    6 1/4"3 1/4"2 1/4"Zinc-Plated Steel1Acetal
    No11/64"661115A118000000
    1033/64"Steel7.95Stainless Steel
    5 1/4"2 3/4"2 1/4"Zinc-Plated Steel1Acetal
    No11/64"661115A121000000
    10153/64"Steel10.60Stainless Steel
    6 1/4"3 1/4"2 1/4"Zinc-Plated Steel1Acetal
    No11/64"661115A123000000
    13.5133/64"Steel13.90Stainless Steel
    6 1/4"3 1/4"2 1/4"Zinc-Plated Steel1Acetal
    No11/64"661115A125000000
    1523/64"Steel11.90Stainless Steel
    5 1/4"2 3/4"2 1/4"Zinc-Plated Steel1Acetal
    No11/64"661115A127000000
    15133/64"Steel15.50Stainless Steel
    6 1/4"3 1/4"2 1/4"Zinc-Plated Steel1Acetal
    No11/64"661115A129000000
     

    Variable-Force Strip Springs

    Image of Product. Front orientation. Strip Springs. Variable-Force Strip Springs.
    Compared to constant-force springs, these are easier to pull at first but become harder to pull the farther you extend them. Use them for applications where the load becomes lighter as the spring contracts, such as in automated dispensing machines. All are stainless steel for corrosion resistance. Please allow for 1 ½ coils on the shaft at full extension to hold the spring in place.
    Wt. Load,
    lb.
    Extended
    Lg.
    Thk.
    Wd.
    ID
    OD
    OD Tolerance
    Mounting
    Hole Dia.
    No. of Mounting
    Holes
    Material
    Each
    5,000 Cycle Useful Life
    0.5 to 1.0022"0.0045"0.5"0.4"0.85"-0.031" to 0.03"0.191"1301 Stainless Steel
    1846N700000
    0.55 to 1.2028"0.0045"0.5"0.4"0.73"-0.031" to 0.03"0.191"1301 Stainless Steel
    1846N20000
    0.75 to 1.5022"0.005"0.5"0.5"0.8"-0.031" to 0.03"0.191"1301 Stainless Steel
    1846N80000
    0.9 to 1.8022"0.007"0.5"0.5"1.125"-0.031" to 0.03"0.191"1301 Stainless Steel
    1846N90000
    1 to 2.2022"0.007"0.5"0.55"1.03"-0.031" to 0.03"0.191"1301 Stainless Steel
    1846N110000
    1 to 2.2028"0.007"0.5"0.55"0.95"-0.031" to 0.03"0.191"1301 Stainless Steel
    1846N30000
    1.5 to 2.6022"0.008"0.5"0.63"1.2"-0.031" to 0.03"0.191"1301 Stainless Steel
    1846N120000
    1.5 to 2.6028"0.008"0.5"0.63"1.275"-0.031" to 0.03"0.191"1301 Stainless Steel
    1846N40000
    1.75 to 3.3022"0.01"0.5"0.98"1.38"-0.031" to 0.03"0.191"1301 Stainless Steel
    1846N130000
    1.75 to 3.3028"0.01"0.5"0.98"1.46"-0.031" to 0.03"0.191"1301 Stainless Steel
    1846N50000
    2 to 4.0028"0.012"0.5"0.95"1.55"-0.031" to 0.03"0.191"1301 Stainless Steel
    1846N60000
     
    7,500 Cycle Useful Life
    0.55 to 1.0028"0.0045"0.5"0.4"0.8"-0.031" to 0.03"0.191"1301 Stainless Steel
    1846N10000
     

    Clip-On Constant-Force Strip Springs

    Image of Product. Front orientation. Strip Springs. Clip-On Constant-Force Strip Springs.
    Clip the end onto a flat surface to install—no fasteners needed. Once installed, these springs pull back with the same amount of force no matter how far you extend them. Compact and tightly coiled, they extend to multiple times their length to pull objects in a linear direction. All are stainless steel for corrosion resistance. When using, please allow for 1 ½ extra coils on the shaft at full extension to hold the spring in place.
    Extended
    Lg.
    Load,
    lb.
    Wt. Load Tolerance,
    lb.
    Thk.
    Wd.
    ID
    ID Tolerance
    OD
    OD Tolerance
    For Max. Mounting
    Surface Thk.
    Material
    Each
    5,000 Cycle Useful Life
    24"1.5-0.15 to 0.150.006"0.5"0.53"-0.05" to 0.05"0.68"-0.031" to 0.03"0.138"301 Stainless Steel
    1845N700000
    24"1.75-0.17 to 0.170.007"0.5"0.63"-0.05" to 0.05"0.725"-0.031" to 0.03"0.136"301 Stainless Steel
    1845N80000
     
    13,000 Cycle Useful Life
    24"0.2-0.02 to 0.020.003"0.25"0.35"-0.02" to 0.02"0.45"-0.031" to 0.03"0.119"301 Stainless Steel
    1845N10000
    24"0.4-0.04 to 0.040.004"0.25"0.4"-0.04" to 0.04"0.55"-0.031" to 0.03"0.117"301 Stainless Steel
    1845N20000
    24"0.6-0.06 to 0.060.005"0.25"0.45"-0.05" to 0.05"0.6"-0.031" to 0.03"0.115"301 Stainless Steel
    1845N30000
    24"0.8-0.08 to 0.080.005"0.312"0.5"-0.05" to 0.05"0.675"-0.031" to 0.03"0.115"301 Stainless Steel
    1845N40000
    24"1-0.1 to 0.100.006"0.312"0.51"-0.05" to 0.05"0.6"-0.031" to 0.03"0.138"301 Stainless Steel
    1845N50000
    24"1.25-0.12 to 0.120.006"0.375"0.55"-0.05" to 0.05"0.675"-0.031" to 0.03"0.138"301 Stainless Steel
    1845N60000
     
    back to top