We will reply to your message within an hour.
More
These dual-material foam sheets and strips have ultra-soft polyurethane foam on one side and chemical-resistant polyethylene foam on the other. They are widely used in packaging applications to absorb shock and damp vibration.
Also known as Ethafoam.
Made of FDA-listed materials, these polyethylene foam sheets are often used as packaging for food products to absorb shock and damp vibration.
These sheets and strips are made of cross-linked polyethylene, so they are stronger and more chemical resistant than other types of polyethylene foam.
Often used as padding in helmets, gloves, and boots, this super-strong EVA foam absorbs shock and resists tearing better than other types of foam.
Exceptionally strong, this lightweight ionomer foam offers excellent resistance to impact, UV light, and water. It stands up to wear caused by rubbing and scraping and is often used on bumpers and buoys.
The open top allows these foam U-channels to slide over and cushion an edge.
Use these foam half rounds as a cushioning bumper.
There are hundreds of cushioning pillows in every foot of these pliable mesh sheets. They're often used as a protective liner in drawers and cabinets and anywhere a nonskid surface is required.
In addition to having good resistance to water, sunlight, and oxidation, these neoprene foam sheets and strips resist swelling when they come into contact with oil.
Made of a blend of neoprene and EDPM, these foam sheets and strips resist water, sunlight, and oxidation.
Just like the material found in wetsuits, these neoprene foam sheets are encased in nylon fabric for additional protection from wear caused by rubbing and abrasion.
EPDM is blended with neoprene and SBR to create a general-purpose foam that offers good resistance to water and wear.
Made of EPDM foam, these sheets and strips have the best resistance to water, sunlight, and oxidation of all the foam we offer.
These vinyl foam sheets and strips are so conformable that once they're compressed they won't fully spring back. Use them to fill gaps and seal uneven surfaces.
Neoprene is blended with EPDM and polyethylene for foam tubes that offer good resistance to water, sunlight, and oxidation.
These EPDM foam tubes have the best resistance to water, sunlight, and oxidation of all the foam tubes we offer.
These neoprene foam cords stand up to water, sunlight, and oxidation, plus they resist swelling when they come into contact with oil.
Made of EPDM, this foam has the best resistance to water, sunlight, and oxidation of all the foam we offer.
An economical alternative to neoprene foam, these Santoprene foam cords stand up to water, sunlight, and oxidation but lack oil resistance.
Silicone maintains its flexibility across a wide range of temperatures.
These sheets and strips will bounce back to shape, even after extended compression.
This premium silicone is the most resilient foam we offer. It is equivalent to Cohrlastic and is also known as Norseal and silicone sponge.
One layer of fiberglass fabric is sandwiched between layers of silicone foam giving these strips strength to handle high-stress applications, such as gasketing.
Prevent the spread of flames with these self-extinguishing silicone foam sheets and strips.
Seal and damp vibration around high-temperature food-service equipment with these silicone foam sheets and strips.
Even after exposure to sunlight, rain, and snow, these silicone foam strips remain flexible.
Protect sensitive equipment from heat buildup with this silicone foam. These sheets are commonly used to fill gaps and damp vibration in computers, battery installations, and pipe assemblies.
These silicone foam cords meet NSF/ANSI 51 for food equipment materials. Use them to seal and cushion narrow spaces in food service equipment.
Seal and cushion narrow spaces in hot environments with these silicone foam cords.
Seal and damp vibration in high-temperature equipment with these rings.
Made from a blend of Buna-N, neoprene, and vinyl, these foam strips have good resistance to oil.
This foam meets UL fire extinguishing specifications. It's made from a blend of Buna-N, neoprene, and vinyl to offer offer good resistance to oil.
Made of Epichlorohydrin, an alternative to Buna-N, these foam sheets have excellent resistance to oil.
Protect electronic components from electrostatic shocks and chemicals while safeguarding them from bumps and drops during shipping and storing.
An economical alternative to Viton® fluoroelastomer foam, these semi-rigid nylon foam sheets offer good resistance to a wide range of chemicals.
Offering excellent resistance to corrosive environments, these Viton® fluoroelastomer foam sheets and strips stand up to a wide variety of chemicals, fuels, and oils.
Know at a glance when a tool is missing from a toolbox with this dual-color foam.
Stiff yet moldable, this foam takes the shape of any object that's pressed into it and will never spring back.
Stick these gaskets around door and vent cutouts or replace worn seals to maintain your enclosure's NEMA rating.
Soft and easy to install, this insulation restricts absorption of water, air, and gas. It is often used on cold and hot water lines and refrigeration lines.
Ready to withstand weather and UV rays, this insulation comes wrapped in protective jacketing.
Less flexible than rubber foam, this insulation restricts absorption of water, air, and gas. It is typically used in plumbing applications
Even at high temperatures, these tubes remain flexible to stretch over components without tearing. They restrict absorption of water, air, and gas and are typically used on hot and cold water lines and electrical components.
This very rigid insulation offers the lowest heat-flow rate of our pipe insulation and restricts absorption of water, air, and gas. It is typically used in process piping and chiller plants and performs best in applications below 50° F.
These sheets resist the absorption of water, air, and gas and are widely used in cold-storage and packaging applications.
Made of rugged PVC foam, these rigid sheets absorb impact and restrict the absorption of water, air, and gas. Use in applications with operating temperatures below 32° F.
The fiberglass facing on these flexible silicone foam sheets protects against highly abrasive conditions and resists tearing.
Made of EPDM foam rubber, these seals have hollow construction for more compressibility than solid seals.
These seals are made of solid EPDM foam rubber.
It’s the hollow construction that makes these seals more compressible than solid seals. Made of silicone foam rubber, they also resist water and salts.
Made of solid silicone foam rubber, these seals also resist water and salts.
These seals have solid construction.
These hollow seals offer better compressibility than solid seals.
Softer and more flexible than EPDM rubber seals, these EPDM foam rubber seals will effortlessly conform to uneven surfaces.
These seals have an EPDM foam rubber bulb.
Made of EPDM foam, these seals resist water, sunlight, and ozone while also meeting transportation industry standards for flames, smoke, and toxicity.
Instead of cutting and adhering straight pieces together to cover a corner, these seals save you time and effort by coming already formed to 90°. All are made of EPDM foam to resist water, sunlight, and ozone.
The Buna-N foam rubber bulb on these seals also resists grease, salts, water, steam, and most detergents.
Already formed to 90°, these seals save you time and effort because you don’t have to cut and adhere straight pieces together to cover a corner. They’re made of Buna-N foam, so they resist oil, grease, salts, water, and most detergents.
In addition to oil, these Buna-N seals resist grease, salts, water, steam, and most detergents.
FDA compliant, these seals can directly touch food. They’re made of Buna-N foam, so they resist oil, grease, salts, water, and most detergents.
Save time covering corners—these seals come formed to a corner, so they don't require bending or cutting.
More compressible than seals with a solid bulb, these seals have a hollow bulb.
These seals have a solid bulb.
Quickly seal corners without needing to bend, cut, or piece straight seals together. All of these seals are made of EPDM foam to resist water, sunlight, and ozone.
These seals have an EPDM foam rubber wiper, which is softer and more flexible than EPDM rubber wipers.
With an accordion shape, these seals extend to cover large gaps, so they block debris and allow the two edges they connect to move.
Softer and more flexible than EPDM rubber, these EPDM foam seals have a wiper that clears debris and a bulb that conforms to uneven surfaces to guard against dust, noise, and vibration.
Made of EPDM foam or EPDM rubber, these seals stand up to water, sunlight, and ozone.
The most conformable foam tape we offer, use this tape for mounting, gasketing, and damping sound and vibration. It has adhesive on both sides.
Use this tape outdoors for sealing and mounting signs and security control panels.
Mount lightweight signs and trim with this economical tape.
Tape is cut into convenient discs and rectangles.
Repair ceiling tiles and pass-through windows in clean rooms with this foam tape with adhesive on both sides.
Remove mounted objects from most surfaces without leaving residue behind.
Create strong, permanent bonds that can replace mechanical fasteners.
Use this clear tape for strong, invisible bonds.
This tape can withstand temperatures up to 300° F.
The acrylic adhesive on this tape sticks to hard-to-bond materials, such as plastics and powder-coated surfaces.
These foam discs and squares have extra-strong adhesive on both sides to create permanent bonds.
Use these clear shapes for strong, invisible bonds.
The acrylic adhesive on these sheets sticks to hard-to-bond materials, such as plastics and powder-coated surfaces.
Use these clear sheets for strong, invisible bonds.
Cut these sheets to create a customized, permanent bond in the shape you need.
Foam damps vibration while securing lightweight objects, such as nameplates, dispensers, and smoke alarms. This tape has a tacky adhesive on one side and a permanent adhesive on the other.
Stop water penetration with this tacky, flexible tape. It conforms to irregular shapes and expands to fill gaps. Use it on freezers, windows, and in marine applications.
Quiet squeaky floor joists and reduce vibration with this foam tape.
Create lightweight molds with these two-part compounds.
Provide support for sealants in gaps—insert these backer rods into gaps and fill in with sealant.