Search Results
Cut Direction Cut Direction |
|---|
 | Right Hand |
 | Left Hand |
 | Neutral |
For Insert Code For Insert Code |
|---|
|
|
--41a096a29da1602001744-p9@1x_637375809502281682.png?ver=ImageNotFound)
Insert Holding Method Insert Holding Method |
|---|
|
Clamp Reference Number Clamp Reference Number |
|---|
|
Turning Carbide Insert Holders
Pair these holders with an ANSI standard carbide insert (sold separately). When one edge of the insert dulls, rotate it to use another edge. Right-hand holders cut from right to left, left-hand holders cut from left to right, and neutral holders can cut in either direction.
M series holders are good general-purpose holders. They are best for roughing cuts but can also perform medium and finishing cuts.
D series holders have a wedge-style clamping system that provides an extremely rigid hold for reduced chatter and extended tool life. These holders are best for medium cuts but can also perform roughing and finishing operations.
Holders with an offset shank are good for reaching into tight corners and when working close to the chuck.
MCLN Holders with Offset Shank—For Along-the-Length Turning, Chamfering, and Facing
Right Hand
Left Hand
Holders | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Shank | For Insert | Replacement Clamps | Replacement Clamp Screws | Replacement Lock Pin Screws | Replacement Seats | ||||||||||
| Wd. | Ht. | O'all Lg. | Code | Inscribed Circle Dia. (IC) | Thick. | Each | Each | Each | Each | Each | |||||
Right Hand | |||||||||||||||
| 3/4" | 3/4" | 4 1/2" | CNGG-431 CNGG-432 CNMG-431 CNMG-432 CNMG-433 | 1/2" | 3/16" | 00000000 | 000000 | 00000000 | 000000 | 00000000 | 00000 | 00000000 | 00000 | 00000000 | 00000 |
| 1" | 1" | 6" | CNGG-431 CNGG-432 CNMG-431 CNMG-432 CNMG-433 | 1/2" | 3/16" | 00000000 | 00000 | 00000000 | 00000 | 00000000 | 0000 | 00000000 | 0000 | 00000000 | 0000 |
| 1" | 1" | 6" | CNMG-542 CNMG-543 CNMG-544 | 5/8" | 1/4" | 00000000 | 00000 | 00000000 | 00000 | 00000000 | 0000 | 00000000 | 0000 | 00000000 | 0000 |
Left Hand | |||||||||||||||
| 3/4" | 3/4" | 4 1/2" | CNGG-431 CNGG-432 CNMG-431 CNMG-432 CNMG-433 | 1/2" | 3/16" | 00000000 | 00000 | 00000000 | 00000 | 00000000 | 0000 | 00000000 | 0000 | 00000000 | 0000 |
| 1" | 1" | 6" | CNGG-431 CNGG-432 CNMG-431 CNMG-432 CNMG-433 | 1/2" | 3/16" | 00000000 | 00000 | 00000000 | 00000 | 00000000 | 0000 | 00000000 | 0000 | 00000000 | 0000 |
| 1" | 1" | 6" | CNMG-542 CNMG-543 CNMG-544 | 5/8" | 1/4" | 00000000 | 00000 | 00000000 | 00000 | 00000000 | 0000 | 00000000 | 0000 | 00000000 | 0000 |
Economy Inserts for MCLN Holders
CNMG
CNMG
Each | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Insert Code | Inscribed Circle Dia. (IC) | Thick. | Cutting Edge Lg. | Tip Radius | For Cutting Operation | Finish | Coating Process | 1-9 | 10-Up | |
For Use On Aluminum, Brass, Bronze | ||||||||||
| CNMG-432 | 1/2" | 3/16" | 0.51" | 1/32" | Medium | Uncoated | __ | 0000000 | 00000 | 00000 |
| CNMG-543 | 5/8" | 1/4" | 0.64" | 3/64" | Medium | Uncoated | __ | 0000000 | 0000 | 0000 |
For Use On Steel, Stainless Steel | ||||||||||
| CNMG-432 | 1/2" | 3/16" | 0.51" | 1/32" | Medium | Titanium Nitride (TiN) Coated | PVD (Physical Vapor Deposition) | 0000000 | 0000 | 0000 |
| CNMG-543 | 5/8" | 1/4" | 0.64" | 3/64" | Medium | Titanium Nitride (TiN) Coated | PVD (Physical Vapor Deposition) | 0000000 | 00000 | 0000 |
Inserts for MCLN Holders
CNGG
CNMG
CNGG
CNMG
Each | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Insert Code | Inscribed Circle Dia. (IC) | Thick. | Cutting Edge Lg. | Tip Radius | For Cutting Operation | Finish | Coating Process | 1-9 | 10-Up | |
For Use On Aluminum, Brass, Bronze, Cast Iron, Nickel, Stainless Steel, Steel, and Titanium | ||||||||||
| CNGG-431 | 1/2" | 3/16" | 0.33" | 1/64" | Finishing | Uncoated | __ | 00000000 | 000000 | 000000 |
| CNGG-432 | 1/2" | 3/16" | 0.33" | 1/32" | Finishing | Uncoated | __ | 00000000 | 00000 | 00000 |
| CNMG-431 | 1/2" | 3/16" | 0.49" | 1/64" | Medium | Titanium Nitride (TiN) Coated | CVD (Chemical Vapor Deposition) | 00000000 | 00000 | 00000 |
| CNMG-432 | 1/2" | 3/16" | 0.48" | 1/32" | Medium | Titanium Nitride (TiN) Coated | CVD (Chemical Vapor Deposition) | 00000000 | 00000 | 00000 |
| CNMG-433 | 1/2" | 3/16" | 0.46" | 3/64" | Medium | Titanium Nitride (TiN) Coated | CVD (Chemical Vapor Deposition) | 00000000 | 00000 | 00000 |
| CNMG-542 | 5/8" | 1/4" | 0.6" | 1/32" | Medium | Aluminum Chromium Oxide ((Al,Cr)₂O₃) Coated | PVD (Physical Vapor Deposition) | 00000000 | 00000 | 00000 |
| CNMG-543 | 5/8" | 1/4" | 0.59" | 3/64" | Roughing | Titanium Nitride (TiN) Coated | CVD (Chemical Vapor Deposition) | 00000000 | 00000 | 00000 |
For Use On Aluminum, Brass, and Bronze | ||||||||||
| CNMG-431 | 1/2" | 3/16" | 0.49" | 1/64" | Medium | Uncoated | __ | 00000000 | 00000 | 00000 |
| CNMG-432 | 1/2" | 3/16" | 0.48" | 1/32" | Medium | Uncoated | __ | 00000000 | 00000 | 00000 |
| CNMG-433 | 1/2" | 3/16" | 0.46" | 3/64" | Medium | Uncoated | __ | 00000000 | 00000 | 00000 |
| CNMG-542 | 5/8" | 1/4" | 0.6" | 1/32" | Medium | Uncoated | __ | 00000000 | 00000 | 00000 |
| CNMG-543 | 5/8" | 1/4" | 0.59" | 3/64" | Medium | Uncoated | __ | 00000000 | 00000 | 00000 |
| CNMG-544 | 5/8" | 1/4" | 0.42" | 1/16" | Medium | Titanium Nitride (TiN) Coated | CVD (Chemical Vapor Deposition) | 00000000 | 00000 | 00000 |
For Use On Stainless Steel | ||||||||||
| CNGG-431 | 1/2" | 3/16" | 0.33" | 1/64" | Finishing | Titanium Aluminum Nitride (TiAlN) Coated | PVD (Physical Vapor Deposition) | 00000000 | 00000 | 00000 |
| CNGG-432 | 1/2" | 3/16" | 0.33" | 1/32" | Finishing | Titanium Aluminum Nitride (TiAlN) Coated | PVD (Physical Vapor Deposition) | 00000000 | 00000 | 00000 |
| CNMG-431 | 1/2" | 3/16" | 0.49" | 1/64" | Finishing | Titanium Nitride (TiN) Coated | CVD (Chemical Vapor Deposition) | 00000000 | 00000 | 00000 |
| CNMG-432 | 1/2" | 3/16" | 0.48" | 1/32" | Medium | Titanium Nitride (TiN) Coated | CVD (Chemical Vapor Deposition) | 00000000 | 00000 | 00000 |
| CNMG-433 | 1/2" | 3/16" | 0.46" | 3/64" | Medium | Titanium Nitride (TiN) Coated | CVD (Chemical Vapor Deposition) | 00000000 | 00000 | 00000 |
| CNMG-542 | 5/8" | 1/4" | 0.6" | 1/32" | Medium | Titanium Nitride (TiN) Coated | CVD (Chemical Vapor Deposition) | 00000000 | 00000 | 00000 |
| CNMG-543 | 5/8" | 1/4" | 0.59" | 3/64" | Medium | Titanium Nitride (TiN) Coated | CVD (Chemical Vapor Deposition) | 00000000 | 00000 | 00000 |
| CNMG-544 | 5/8" | 1/4" | 0.57" | 1/16" | Medium | Titanium Nitride (TiN) Coated | CVD (Chemical Vapor Deposition) | 00000000 | 00000 | 00000 |
For Use On Steel | ||||||||||
| CNGG-431 | 1/2" | 3/16" | 0.33" | 1/64" | Finishing | Aluminum Chromium Oxide ((Al,Cr)₂O₃) Coated | PVD (Physical Vapor Deposition) | 00000000 | 00000 | 00000 |
| CNGG-432 | 1/2" | 3/16" | 0.33" | 1/32" | Finishing | Aluminum Chromium Oxide ((Al,Cr)₂O₃) Coated | PVD (Physical Vapor Deposition) | 00000000 | 00000 | 00000 |
| CNMG-431 | 1/2" | 3/16" | 0.49" | 1/64" | Medium | Titanium Nitride (TiN) Coated | CVD (Chemical Vapor Deposition) | 00000000 | 00000 | 00000 |
| CNMG-432 | 1/2" | 3/16" | 0.48" | 1/32" | Medium | Titanium Nitride (TiN) Coated | CVD (Chemical Vapor Deposition) | 00000000 | 00000 | 00000 |
| CNMG-433 | 1/2" | 3/16" | 0.46" | 3/64" | Medium | Titanium Nitride (TiN) Coated | CVD (Chemical Vapor Deposition) | 00000000 | 00000 | 00000 |
| CNMG-542 | 5/8" | 1/4" | 0.6" | 1/32" | Medium | Titanium Nitride (TiN) Coated | CVD (Chemical Vapor Deposition) | 00000000 | 00000 | 00000 |
| CNMG-543 | 5/8" | 1/4" | 0.59" | 3/64" | Medium | Titanium Nitride (TiN) Coated | CVD (Chemical Vapor Deposition) | 00000000 | 00000 | 00000 |
| CNMG-544 | 5/8" | 1/4" | 0.57" | 1/16" | Medium | Titanium Nitride (TiN) Coated | CVD (Chemical Vapor Deposition) | 00000000 | 00000 | 00000 |
Inserts for MVJN Holders
Each | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Insert Code | Inscribed Circle Dia. (IC) | Thick. | Cutting Edge Lg. | Tip Radius | For Cutting Operation | Finish | Coating Process | 1-9 | 10-Up | |
For Use On Aluminum, Brass, Bronze, Cast Iron, Nickel, Stainless Steel, Steel, and Titanium | ||||||||||
| VNMG-332 | 3/8" | 3/16" | 0.09" | 1/32" | Finishing | Uncoated | CVD (Chemical Vapor Deposition) | 00000000 | 000000 | 000000 |
For Use On Stainless Steel | ||||||||||
| VNMG-332 | 3/8" | 3/16" | 0.62" | 1/32" | Finishing | Titanium Nitride (TiN) Coated | CVD (Chemical Vapor Deposition) | 00000000 | 00000 | 00000 |
For Use On Steel | ||||||||||
| VNMG-332 | 3/8" | 3/16" | 0.62" | 1/32" | Finishing | Titanium Nitride (TiN) Coated | CVD (Chemical Vapor Deposition) | 00000000 | 00000 | 00000 |
MVVN Holders with Straight Shank—For Along-the-Length Turning, Chamfering, and External Profiling
Inserts for MVVN Holders
Each | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Insert Code | Inscribed Circle Dia. (IC) | Thick. | Cutting Edge Lg. | Tip Radius | For Cutting Operation | Finish | Coating Process | 1-9 | 10-Up | |
For Use On Aluminum, Brass, Bronze, Cast Iron, Nickel, Stainless Steel, Steel, and Titanium | ||||||||||
| VNMG-332 | 3/8" | 3/16" | 0.09" | 1/32" | Finishing | Uncoated | CVD (Chemical Vapor Deposition) | 00000000 | 000000 | 000000 |
For Use On Stainless Steel | ||||||||||
| VNMG-332 | 3/8" | 3/16" | 0.62" | 1/32" | Finishing | Titanium Nitride (TiN) Coated | CVD (Chemical Vapor Deposition) | 00000000 | 00000 | 00000 |
For Use On Steel | ||||||||||
| VNMG-332 | 3/8" | 3/16" | 0.62" | 1/32" | Finishing | Titanium Nitride (TiN) Coated | CVD (Chemical Vapor Deposition) | 00000000 | 00000 | 00000 |
DCLN Holders with Offset Shank—For Along-the-Length Turning and Facing
Right Hand
Left Hand
Holders | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Shank | For Insert | Replacement Clamps | Replacement Seats | Replacement Seat Screws | Replacement Slotted Pins | ||||||||||
| Wd. | Ht. | O'all Lg. | Code | Inscribed Circle Dia. (IC) | Thick. | Each | Each | Each | Each | Each | |||||
Right Hand | |||||||||||||||
| 3/4" | 3/4" | 4 1/2" | CNGG-432, CNMG-432 | 1/2" | 3/16" | 00000000 | 000000 | 00000000 | 000000 | 00000000 | 00000 | 00000000 | 00000 | 00000000 | 00000 |
| 1" | 1" | 6" | CNGG-432, CNMG-432 | 1/2" | 3/16" | 00000000 | 00000 | 00000000 | 00000 | 00000000 | 0000 | 00000000 | 0000 | 00000000 | 000 |
| 1" | 1" | 6" | CNMG-543 | 5/8" | 1/4" | 00000000 | 00000 | 00000000 | 00000 | 00000000 | 00000 | 00000000 | 00000 | 00000000 | 000 |
Left Hand | |||||||||||||||
| 3/4" | 3/4" | 4 1/2" | CNGG-432, CNMG-432 | 1/2" | 3/16" | 00000000 | 00000 | 00000000 | 00000 | 00000000 | 0000 | 00000000 | 0000 | 00000000 | 000 |
| 1" | 1" | 6" | CNGG-432, CNMG-432 | 1/2" | 3/16" | 00000000 | 00000 | 00000000 | 00000 | 00000000 | 0000 | 00000000 | 0000 | 00000000 | 000 |
| 1" | 1" | 6" | CNMG-543 | 5/8" | 1/4" | 00000000 | 00000 | 00000000 | 00000 | 00000000 | 00000 | 00000000 | 00000 | 00000000 | 000 |
Economy Inserts for DCLN Holders
CNMG
CNMG
Each | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Insert Code | Inscribed Circle Dia. (IC) | Thick. | Cutting Edge Lg. | Tip Radius | For Cutting Operation | Finish | Coating Process | 1-9 | 10-Up | |
For Use On Aluminum, Brass, Bronze | ||||||||||
| CNMG-432 | 1/2" | 3/16" | 0.51" | 1/32" | Medium | Uncoated | __ | 0000000 | 00000 | 00000 |
| CNMG-543 | 5/8" | 1/4" | 0.64" | 3/64" | Medium | Uncoated | __ | 0000000 | 0000 | 0000 |
For Use On Steel, Stainless Steel | ||||||||||
| CNMG-432 | 1/2" | 3/16" | 0.51" | 1/32" | Medium | Titanium Nitride (TiN) Coated | PVD (Physical Vapor Deposition) | 0000000 | 0000 | 0000 |
| CNMG-543 | 5/8" | 1/4" | 0.64" | 3/64" | Medium | Titanium Nitride (TiN) Coated | PVD (Physical Vapor Deposition) | 0000000 | 00000 | 0000 |
Inserts for DCLN Holders
CNGG
CNMG
CNGG
CNMG
Each | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Insert Code | Inscribed Circle Dia. (IC) | Thick. | Cutting Edge Lg. | Tip Radius | For Cutting Operation | Finish | Coating Process | 1-9 | 10-Up | |
For Use On Aluminum, Brass, Bronze, Cast Iron, Nickel, Stainless Steel, Steel, and Titanium | ||||||||||
| CNGG-432 | 1/2" | 3/16" | 0.33" | 1/32" | Finishing | Uncoated | __ | 00000000 | 000000 | 000000 |
| CNMG-432 | 1/2" | 3/16" | 0.48" | 1/32" | Medium | Titanium Nitride (TiN) Coated | CVD (Chemical Vapor Deposition) | 00000000 | 00000 | 00000 |
| CNMG-543 | 5/8" | 1/4" | 0.59" | 3/64" | Roughing | Titanium Nitride (TiN) Coated | CVD (Chemical Vapor Deposition) | 00000000 | 00000 | 00000 |
For Use On Aluminum, Brass, and Bronze | ||||||||||
| CNMG-432 | 1/2" | 3/16" | 0.48" | 1/32" | Medium | Uncoated | __ | 00000000 | 00000 | 00000 |
| CNMG-543 | 5/8" | 1/4" | 0.59" | 3/64" | Medium | Uncoated | __ | 00000000 | 00000 | 00000 |
For Use On Stainless Steel | ||||||||||
| CNGG-432 | 1/2" | 3/16" | 0.33" | 1/32" | Finishing | Titanium Aluminum Nitride (TiAlN) Coated | PVD (Physical Vapor Deposition) | 00000000 | 00000 | 00000 |
| CNMG-432 | 1/2" | 3/16" | 0.48" | 1/32" | Medium | Titanium Nitride (TiN) Coated | CVD (Chemical Vapor Deposition) | 00000000 | 00000 | 00000 |
| CNMG-543 | 5/8" | 1/4" | 0.59" | 3/64" | Medium | Titanium Nitride (TiN) Coated | CVD (Chemical Vapor Deposition) | 00000000 | 00000 | 00000 |
For Use On Steel | ||||||||||
| CNGG-432 | 1/2" | 3/16" | 0.33" | 1/32" | Finishing | Aluminum Chromium Oxide ((Al,Cr)₂O₃) Coated | PVD (Physical Vapor Deposition) | 00000000 | 00000 | 00000 |
| CNMG-432 | 1/2" | 3/16" | 0.48" | 1/32" | Medium | Titanium Nitride (TiN) Coated | CVD (Chemical Vapor Deposition) | 00000000 | 00000 | 00000 |
| CNMG-543 | 5/8" | 1/4" | 0.59" | 3/64" | Medium | Titanium Nitride (TiN) Coated | CVD (Chemical Vapor Deposition) | 00000000 | 00000 | 00000 |
Shank-Style Holders for Indexable
Cutoff and Grooving Carbide Inserts
Fit these holders directly into a lathe tool post or appropriately sized holder without the need for a tool block. Pair with a square-nose carbide insert (sold separately) to make a cutoff and grooving tool or a round-nose insert to make a grooving and profiling tool. These holders have an opening at one end.
Holders
Shank | ||||||||
|---|---|---|---|---|---|---|---|---|
| Max. Dp. of Cut | Wd. | Ht. | O'all Lg. | For Insert Thick. | Material | Hex Key Size | Each | |
| 0.35" | 3/4" | 3/4" | 5" | 0.118" | Steel | 0.197" | 0000000 | 000000 |
| 0.35" | 1" | 1" | 6" | 0.118" | Steel | 0.197" | 0000000 | 000000 |
| 0.47" | 3/4" | 3/4" | 5" | 0.157" | Steel | 0.197" | 0000000 | 00000 |
| 0.47" | 1" | 1" | 6" | 0.157" | Steel | 0.197" | 0000000 | 000000 |
| 0.55" | 3/4" | 3/4" | 5" | 0.118" | Steel | 0.197" | 0000000 | 00000 |
| 0.55" | 1" | 1" | 6" | 0.118" | Steel | 0.197" | 0000000 | 000000 |
| 0.71" | 3/4" | 3/4" | 5" | 0.157" | Steel | 0.197" | 0000000 | 00000 |
| 0.71" | 1" | 1" | 6" | 0.157" | Steel | 0.197" | 0000000 | 000000 |
| 0.79" | 3/4" | 3/4" | 5" | 0.118" | Steel | 0.197" | 0000000 | 000000 |
| 0.79" | 1" | 1" | 6" | 0.118" | Steel | 0.197" | 0000000 | 000000 |
| 0.95" | 3/4" | 3/4" | 5" | 0.157" | Steel | 0.197" | 0000000 | 000000 |
| 0.95" | 1" | 1" | 6" | 0.157" | Steel | 0.197" | 0000000 | 000000 |
Grooving and Profiling Inserts
External Grooving
External Profiling
The rounded nose on these inserts contours the outside of the workpiece and cuts grooves with rounded edges. Pair an insert with a compatible shank-style holder. When the first cutting edge dulls, flip the insert to use the other edge, giving it twice the life of a standard grooving insert.
| Thick. | Max. Dp. of Cut | Lg. | Lead Angle | Radius | Material | Material Grade | Finish | For Use On | Each | |
For Use On Aluminum, Cast Iron, Stainless Steel, and Steel | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| 0.118" | 0.06" | 0.866" | 0° | 0.059" | Carbide | C5 | Titanium Aluminum Nitride (TiAlN) Coated | Aluminum, Cast Iron, Stainless Steel, Steel | 0000000 | 000000 |
| 0.157" | 0.08" | 0.984" | 0° | 0.079" | Carbide | C5 | Titanium Aluminum Nitride (TiAlN) Coated | Aluminum, Cast Iron, Stainless Steel, Steel | 0000000 | 00000 |