Cut these labels to a desired length. Use color to identify equipment, materials, and documents at a glance.

Identify equipment and materials in low-light conditions.

These large decals have a pebbled nonskid surface and an adhesive backing that sticks to most surfaces.

These large decals have a pebbled nonskid surface and an adhesive backing that adheres to most surfaces.

Clearly identify areas that require personal protective equipment, such as face masks, gloves, hard hats, safety glasses, and hearing protection.

These large decals have a pebbled nonskid surface and an adhesive backing that adheres to most surfaces.

To limit the spread of illness by helping people social distance, these decals have brightly-colored symbols and text that make them easy to see and understand.

Insulate wire and cable splices, wrap wire harnesses, and repair cable jacketing with this stretchy tape.

Made with fiberglass for durability and abrasion resistance, this tape also withstands high temperatures.

This chemical-resistant tape has adhesive on both sides.

This puncture- and cut-resistant cotton tape is coated with a high-grade electrical-insulating varnish. Also known as cambric tape.

Use this tape to attach components to heat sinks and metal chassis walls in place of screws and other mechanical fasteners. It conducts heat away from sensitive electronics.

A coating on this polyimide tape minimizes ESD (electrostatic discharge) when unwound from the roll and also during removal.

Mark aisles and stairs with a high-contrast reflective strip.

Brush on this liquid to mask small surfaces and irregular shapes.

The adhesive on this crepe paper tape won't damage painted and finished surfaces.

Use this crepe paper tape for sharp paint lines.

Only one edge of this kraft paper tape has adhesive. Apply the sticky side along edges and molding, and the other edge sticks out to catch drips.

Use this tape to wrap and splice cables, mask components while soldering, or as a 3D printing surface.

Aluminum foil is laminated to a tough fiberglass cloth to form a high-strength, reflective tape that resists temperatures up to 500° F. Use it for flame-spray masking and wire harness heat shielding.

Dirt, dust, and paint overspray get trapped in this tape's fibers to protect surfaces and minimize cleanup. Its low-tack adhesive makes it easy to apply and remove.

Made of polyester plastic, this tape resists tearing in high-temperature masking jobs, such as on circuit boards and when powder coating.

This vinyl tape meets clean room requirements and won't leave residue behind. It comes sealed in a plastic bag.

Control the unwanted noise that comes from vibrating panels and support structures. This aluminum foil tape reduces vibration by converting it into a small amount of heat.

Temporarily protect highly polished plastic, metal, and glass surfaces from scratching and marring.

Quiet squeaky floor joists and reduce vibration with this foam tape.

Also known as Ruby Red lithographer's tape, this semi-clear tape filters out light that can affect photo-sensitive film and equipment.

Only 0.0019" thick, so spliced film and paper easily pass through machinery without breaking.

Often used to install carpet, padding, and linoleum.

Repair ceiling tiles and pass-through windows in clean rooms with this foam tape with adhesive on both sides.

Cut these sheets to the shape you need for a custom fit.

Tape is cut into convenient discs and rectangles.

These foam discs and squares have extra-strong adhesive on both sides to create permanent bonds.

The acrylic adhesive on these sheets sticks to hard-to-bond materials, such as plastics and powder-coated surfaces.

The acrylic adhesive on this tape sticks to hard-to-bond materials, such as plastics and powder-coated surfaces.

This tape has a high-tack adhesive that bonds quickly to rough surfaces such as wood, plaster, stucco, brick, metal, and cement.

Also known as gaffer's tape, this conformable cloth tape leaves no residue when removed. The matte finish won't reflect light. Choose a color that will blend in for temporary repairs.

It has the look of foil, but this polyethylene-coated cloth tape is more conformable so it won't twist or curl.

Meets ASME and NRC requirements for use in nuclear power plants. Use to seal end caps on stainless steel pipes, hold labels and signs, and seal ductwork.

For easy identification, this tape is printed with flexible duct standard UL 181A-P or UL 181B-FX.

Seal fiberglass duct and insulation that's faced with an all-service jacket (ASJ). Tape is reinforced with fiberglass.

Often used to repair vinyl facings, this tape can be used on water heater blankets and fiberglass insulation joints.

This uncoated tape is thinner and more conformable than our other repair tape to reinforce irregular shapes.

This tape has a high-bond adhesive that won't leave residue behind so it meets clean room requirements.

Use this glossy tape to seal seams and repair vinyl material such as banners.

Seal boxes with rough or challenging surfaces, such as corrugated and printed cardboard.

This general purpose tape is suitable for most packaging applications.

Seal and label packages in one step.

Seal and color-code bagged parts with this tape.

Secure doors and panels during shipping. This tape sticks to plastic, metal, and glass without leaving residue behind.

Use this tape for a watertight bond on gutters, roofing membranes, and other building materials.

This tough, abrasion-resistant tape sticks to itself, so you can layer it over joints and seams to create an extra-strong bond. The thick adhesive conforms to fasteners and gaps to keep water out, even in extreme conditions.

Also known as skived tape, this low-friction tape stretches to conform to irregular surfaces.

Protect small parts with these slippery UHMW rings, discs, and squares.

Use this slippery PTFE-coated tape for a smooth release on heat sealers and molds.

Often referred to as Rulon and bearing tape, this self-lubricating PTFE tape provides better abrasion and wear resistance than our standard slippery PTFE tape.

Thicker than other floor marking tape, this tape withstands abrasion in high-traffic areas.

These strips come in measured lengths for easy, peel-and-stick installation.

Make parking spaces and traffic lanes. This tape conforms to rough surfaces such as concrete and asphalt.

Make your markings stand out with this fluorescent tape.

Made of a pliable PVC with a rubber adhesive, this tape stretches and conforms to uneven surfaces for a secure hold.

Thicker than other floor marking tape, this tape withstands abrasion in high-traffic areas.

Call attention to hazards in low-light conditions.

Thicker than other floor marking dots, use these abrasion-resistant dots in high-traffic areas.

Direct traffic and identify safety zones in the dark for up to six hours.

Direct traffic in low-light conditions.

Stick safety messages and reminders right where they're needed.

The checkered pattern draws greater attention to safety zones and hazards than solid tape.

Bury this tape above piping and cable to warn excavators and prevent damage.