Extend the service life of air-powered tools and equipment by removing particles and water droplets from compressed air.

Extend the service life of air-powered tools and equipment by removing particles and water droplets from compressed air.

Extend the service life of air-powered tools and equipment by removing particles and water droplets from compressed air.

Extend the service life of air-powered tools and equipment by removing particles and water droplets from compressed air.

Use these filters where high water and dirt removal is needed—they have a two-layer filter element made of stainless steel wire mesh and cotton/polyester packing.

Use these filters to extend the service life of air-powered tools and then throw them away when you're done.

A polyurethane bowl provides good chemical resistance for use with synthetic compressor oils and cleaning fluids.

Discharge up to 300 gallons of water and particles per hour—these filters handle compressed air that’s high in moisture content.

Assembled, inspected, and packaged in a clean environment, these filters come sealed in antistatic double bags.

Replace the filter element in your Wilkerson modular compressed air filter to trap solid particles and water droplets as small as 5 microns.

Replace the filter element in your Norgren modular compressed air filter to trap solid particles and water droplets.

Replace the filter element in your Aventics modular compressed air filter to trap solid particles and water droplets.

Replace the filter element in your Festo modular compressed air filter to trap solid particles and water droplets.

Also known as coalescing filters, these filter elements fit in SMC modular compressed air filters to remove oil and particles as small as 0.01 microns.

Also known as coalescing filters, these filter elements fit in Parker modular compressed air filters to remove oil and particles as small as 0.01 microns.

Also known as coalescing filters, these filter elements fit in Aventics modular compressed air filters to remove oil and particles as small as 0.01 microns.

Also known as coalescing filters, these filters remove compressor oil to extend the service life of air-powered tools and equipment.

Also known as coalescing filters, these filters remove compressor oil to extend the service life of air-powered tools and equipment.

Also known as coalescing filters, these filters remove compressor oil to extend the service life of air-powered tools and equipment.

Also known as coalescing filters, these filters remove compressor oil to extend the service life of air-powered tools and equipment.

Designed for use in main lines with high contamination, these filters remove oil to extend the service life of air-powered tools and equipment.

Housing and bowl are 316 stainless steel to handle extremely corrosive environments and meet NACE (National Association of Corrosion Engineers) specifications.

Mount these filters to a 35 mm DIN rail with the included brackets.

Use these filters in applications where high-quality air is critical. They remove particles down to 0.003 microns, eliminating small traces of oil vapor and its associated odor.

Replace a damaged bowl, or change the bowl material or drain type on your SMC modular compressed air filter.

Replace a damaged bowl, or change the bowl material or drain type on your Parker modular compressed air filter.

Replace a damaged bowl on your Aventics modular compressed air filter.

Two-stage filtration is like getting two filters in one—the first stage removes large particles, while the second removes fine particles.

Produce clean air for instrumentation and other applications, such as food or medical device manufacturing.

Often used in medical device manufacturing and food-processing facilities, these filters have a stainless steel element that can be sterilized in an autoclave.

Replace failing or lost O-rings in Wilkerson modular compressed air filters.

Replace failing or lost O-rings and gaskets in Norgren modular compressed air filters.

A filter and regulator joined top-to-bottom, these filter/regulators fit in the same space as a filter alone.

A filter and regulator joined top-to-bottom, these filter/regulators fit in the same space as a filter alone.

A filter and regulator joined top-to-bottom, these filter/regulators fit in the same space as a filter alone.

A filter and regulator joined top-to-bottom, these filter/regulators fit in the same space as a filter alone.

A stainless steel housing and bowl allow these filter/regulators to withstand corrosive environments in the semiconductor, marine, chemical, instrumentation, and paper industries.

With ±0.2 psi accuracy, these filter/regulators provide more precise control than our other compressed air filter/regulators.

A clear polyurethane bowl makes these filter/regulators chemical resistant for use with synthetic compressor oils and cleaning fluids and allows you to see inside to monitor contents.

A Wilkerson filter, regulator, and lubricator are combined to provide clean, lubricated compressed air at your required pressure.

A Norgren filter, regulator, and lubricator are combined to provide clean, lubricated compressed air at your required pressure.

A Festo filter, regulator, and lubricator are combined to provide clean, lubricated compressed air at your required pressure.

An ASCO Numatics filter, regulator, and lubricator are combined to provide clean, lubricated compressed air at your required pressure.

With one outlet port before the lubricator and one after, these filter/regulator/lubricators work in systems that require lubrication in some lines but not in others.

Use these dryer/filters to protect air-powered tools from water, oil, oil vapor, and particles, then throw them away when you're done.

With a clear polycarbonate bowl that’s visible from all angles and silica gel desiccant that changes from blue to pink, it’s easy to see when it’s time to change the cartridge on these dryer/filters and dryer/filter/regulators.

Once aftercoolers and separators have removed the bulk of the water, use these dryers to remove any remaining moisture in your air line.

Get dry compressed air in high-pressure systems—these dryers have a maximum pressure rating of 300 psi. Once aftercoolers and separators have removed the bulk of the water, they remove any remaining moisture in your air line.

These all-in-one dryers with filters eliminate the need for individual dryers and filters. They cool air through refrigeration to condense water vapor for removal.

These separators have higher flow rates compared to our other compressed air separators. Prevent equipment damage and wear caused by moisture in your compressed air supply. The first step in water removal, use one of these separators to remove the large amount of water created as compressed air cools.

In addition to removing large amounts of water, these separators also remove particles and oil droplets. Place them after your compressor and aftercooler, or at the point of use in applications that don't require an aftercooler.

Remove oil from condensate without needing to service these separators when they’re full.

These tanks have drain ports on the bottom to remove condensation.