Compression Force Gauge Kits

Filter by

System of Measurement

Inch

Metric

Weight Capacity

Less than 1,000 lb.

1,000 lb. to 1,999 lb.

2,000 lb. to 9,999 lb.

10,000 lb. to 19,999 lb.

20,000 lb. or greater

Shape

Measures

Component

PLC/PC Connection Kit

Wireless PC Connection Kit

Measurement Unit

Load Connection Thread Size

Operating System

Diameter

PC Connection

Number of Load Connections

Height

Load Sensor Connection

Button

Dual-Sided Threaded Standoff

Dual-Sided Threaded Stud

Threaded Hole

Threaded Standoff

Threaded Stud

Threaded Through Hole

Data Connection

Maximum Temperature

Weight Measuring Increments

Load Connection Location

Bottom

Side

Top

Sensor Material

17-4 PH Stainless Steel

Operating Mode

Cord Length

DFARS Specialty Metals

Exempt

Export Control Classification Number (ECCN)

REACH

Force Capacity

RoHS

Legal-for-Trade

140 Products

Compression Force Sensors for Tight Spaces

Thinner than a credit card, these force sensors fit into narrow spaces to measure the applied load between two surfaces. While they’re less accurate than larger alternatives such as load cells and handheld force gauges, these will fit almost anywhere. Place them within an industrial press to make sure it’s operating in a safe range, or form them to the contour of a forklift seat to test the concept of adding a smart switch that detects when an operator is sitting and ready to operate the forklift. Sensors should be calibrated before first use. Also known as force sensing resistors.

Kits


Kit with USB-A Connection	Kit with Wi-Fi Connection	Tab Connection	2-Pin Connection
Kit with USB-A Connection	3-Pin Connection

Kits come with software to analyze data from sensors. Kits with USB-A connection include a hub that plugs into your computer’s USB port. Kits with Wi-Fi connection use a hub that wirelessly connects to a computer or tablet within a sensing distance of 210 feet. The hub’s transmitter is certified 802.11b radio – 802.11b/g/n to meet IEEE standards for compatibility with other devices.

Additional sensors and hubs (both sold separately) expand the connections kits.

To connect 3-pin and 2-pin sensors into hubs with USB connections, adapters (sold separately) are required.

			Sensor					Hub
PC Connection Type	Sensor Connection Type	No. of Sensors Included	Capacity, English	Capacity, Newtons	Lg., mm	Wd., mm	Sensing Area Dia., mm	Sensing Distance, ft.	Battery Life, hrs.	No. of Batteries Included	Cord Lg., ft.	For Max. No. of Sensors	For Operating System		Each
USB-A	Tab	3	1 lbs. 25 lbs. 150 lbs.	4.4 N 111 N 667 N	229	14	9.53	__	__	__	10	16	Windows Vista Windows 7 Windows 8 Windows 8.1 Windows 10 Windows 11	0000000	000000000
Wi-Fi	3 Pin, 2 Pin	3	1 lbs. 25 lbs. 150 lbs.	4.4 N 111 N 667 N	197	14	9.53	0-210	5	3	__	16	Windows 2000 Windows XP Windows Vista Windows 7 Windows 8 Windows 8.1 Windows 10 Windows 11	0000000	00000000

Pin Connectors

Male Connector

Female Connector

Use male pin connectors to create a new male end on a trimmed sensor. Install a female end onto a sensor or another component with female pin connectors.

	Sensor Connection Type
Component	Input	Output		Each
Male Pin Connector	3-Pin and 2-Pin Female	3-Pin Male	0000000	00000
Female Pin Connector	3-Pin and 2-Pin Female	3-Pin Female	0000000	0000

Ready-to-Use Tension and Compression Force Sensor Kits

PC Connection Kit

PLC Connection Kit

Wireless PC Connection Kit

With a sensor that’s already calibrated and everything you need to relay data, these kits come ready to operate. Use them to measure forces in equipment and send the data directly to a computer or programmable logic controller (PLC) to monitor, document, and trigger actions in machinery. They’re also used as the foundation within custom-built scales and force gauges, and to measure force in crash tests and other quality control processes. These sensors are also known as load cells.

When choosing a sensor, consider whether you’ll be measuring tension, compression, or both. Select sensors with a capacity rating higher than the greatest load you expect them to receive. They’re designed to briefly handle forces 1.5 times their load capacity to protect from overload. Choose between a rectangle, round, or S-shape sensor to best suit your application.

PC connection kits link to a computer, tablet, or LCD display. All include a calibrated force sensor, a data conversion hub, and data-recording software. The conversion hub turns electrical signals from the sensor into usable force measurements. The software plots and analyzes measurements, so you can track high, low, and average values over time. It can also set off connected alarms or notify you when readings fall outside a set range. Export the data to Microsoft Excel and other analytical software such as MATLAB and LabVIEW. Wired PC connection kits come with a 6-ft. hub-to-PC USB cord. Wireless PC connection kits transmit data over Wi-Fi to your computer from their conversion hub without a cord.

PLC connection kits send an analog signal to your PLC to trigger actions such as diverting items that exceed a certain weight on a conveyor. They include a calibrated sensor and a data conversion hub. They’re not for use with LCD displays.

PLC/PC connection kits combine the trigger functions of a PLC with the tracking and notification features of computer software. They include a calibrated force sensor, a data conversion hub, data-recording software, and a 6-ft. hub-to-USB cord.

IP rated sensors seal out dust. IP66 rated sensors stand up to spraying water. IP67 rated sensors won’t fail if briefly submerged.

Legal-for-trade sensors are NTEP approved for use with equipment that measures materials sold by weight.

Rectangle

With 8 Threaded Holes

With 8 Threaded Through Holes

With 4 Threaded Through Holes

With 4 Threaded Holes

Rectangle sensors are also known as single-point or shear beam load cells. They can be used in multiples across surfaces to measure uneven loads. They’re often used in bench-top and floor scales where loads are often unbalanced. They’re also used in packaging, machine bins, conveyors, and chutes.

PC Connection Kits
Cap.	Accuracy	Measuring Increments	Load Connection Thread Size	Lg.	Wd.	Ht.	Sensor Material	Temp. Range, °F		Each
For Measuring Tension and Compression
With 8 Threaded Holes
1,650 lbs. (750 kg)	±7.9 oz (±225 g)	0.1 lbs. (0.01 kg)	M8 × 1.25 mm	6 7/8"	2 3/8"	2 9/16"	Aluminum	15° to 100°	0000000	000000000
With 8 Threaded Through Holes
110 lbs. (50 kg)	±0.35 oz. (±10 g)	0.01 lbs. (0.01 kg)	M8 × 1.25 mm	6 7/8"	2 3/8"	1 3/16"	Alloy Steel	15° to 100°	00000000	00000000
For Measuring Compression
With 8 Threaded Holes
1,650 lbs. (750 kg)	±7.9 oz (±225 g)	0.1 lbs. (0.01 kg)	M8 × 1.25 mm	6 7/8"	2 3/8"	2 9/16"	Aluminum	15° to 100°	0000000	000000
For Measuring Tension and Compression—IP65 Rated
With 4 Threaded Through Holes
22 lbs. (10 kg)	±0.053 oz. (±1.5 g)	0.01 oz. (0.1 g)	M6 × 1 mm	5 1/8"	1 3/16"	7/8"	Aluminum	15° to 100°	0000000	000000
44 lbs. (20 kg)	±0.11 oz. (±3 g)	0.01 oz. (0.001 kg)	M6 × 1 mm	5 1/8"	1 3/16"	7/8"	Aluminum	15° to 100°	0000000	000000
For Measuring Tension and Compression—IP66 Rated
With 4 Threaded Through Holes
2.2 lbs. (1 kg)	±0.007 oz. (±0.2 g)	0.001 oz. (0.1 g)	M3 × 0.5 mm	2 13/16"	1/2"	3/4"	Aluminum	15° to 100°	00000000	000000
4.4 lbs. (2 kg)	±0.014 oz. (±0.4 g)	0.001 oz. (0.1 g)	M3 × 0.5 mm	2 13/16"	1/2"	3/4"	Aluminum	15° to 100°	00000000	000000
6.6 lbs. (3 kg)	±0.021 oz. (±0.6 g)	0.01 oz. (0.1 g)	M3 × 0.5 mm	2 13/16"	1/2"	3/4"	Aluminum	15° to 100°	00000000	000000
10.5 oz. (300 g)	±0.0021 oz. (±0.06 g)	0.001 oz. (0.01 g)	M3 × 0.5 mm	2 13/16"	1/2"	3/4"	Aluminum	15° to 100°	00000000	000000
For Measuring Tension and Compression—IP67 Rated (Legal-for-Trade)
With 4 Threaded Holes
22 lbs. (10 kg)	±0.07 oz. (±2 g)	0.01 lbs. (0.001 kg)	1/4"-20	5 15/16"	1"	1 9/16"	Aluminum	15° to 100°	0000000	000000
44 lbs. (20 kg)	±0.14 oz. (±4 g)	0.01 lbs. (0.001 kg)	1/4"-20	5 15/16"	1"	1 9/16"	Aluminum	15° to 100°	00000000	000000
110 lbs. (50 kg)	±0.35 oz. (±10 g)	0.01 lbs. (0.01 kg)	1/4"-20	5 15/16"	1"	1 9/16"	Aluminum	15° to 100°	00000000	000000
220 lbs. (100 kg)	±0.7 oz. (±20 g)	0.01 oz. (1 g)	1/4"-20	5 15/16"	1"	1 9/16"	Aluminum	15° to 100°	00000000	000000
With 8 Threaded Holes
550 lbs. (250 kg)	±1.8 oz. (±50 g)	0.01 lbs. (0.01 kg)	5/16"-18	7 3/8"	2 1/2"	2 7/16"	Aluminum	15° to 100°	0000000	00000000
1,100 lbs. (500 kg)	±3.5 oz. (±100 g)	0.1 lbs. (0.01 kg)	5/16"-18	7 3/8"	2 1/2"	2 7/16"	Aluminum	15° to 100°	0000000	00000000
PLC Connection Kits
For Measuring Tension and Compression
With 8 Threaded Through Holes
110 lbs. (50 kg)	±0.35 oz. (±10 g)	0.01 lbs. (0.01 kg)	M8 × 1.25 mm	6 7/8"	2 3/8"	1 3/16"	Alloy Steel	15° to 100°	00000000	00000000
For Measuring Tension and Compression—IP66 Rated
With 4 Threaded Through Holes
2.2 lbs. (1 kg)	±0.007 oz. (±0.2 g)	0.001 oz. (0.1 g)	M3 × 0.5 mm	2 13/16"	1/2"	3/4"	Aluminum	15° to 100°	00000000	000000
4.4 lbs. (2 kg)	±0.014 oz. (±0.4 g)	0.001 oz. (0.1 g)	M3 × 0.5 mm	2 13/16"	1/2"	3/4"	Aluminum	15° to 100°	00000000	000000
6.6 lbs. (3 kg)	±0.021 oz. (±0.6 g)	0.01 oz. (0.1 g)	M3 × 0.5 mm	2 13/16"	1/2"	3/4"	Aluminum	15° to 100°	00000000	000000
10.5 oz. (300 g)	±0.0021 oz. (±0.06 g)	0.001 oz. (0.01 g)	M3 × 0.5 mm	2 13/16"	1/2"	3/4"	Aluminum	15° to 100°	00000000	000000
For Measuring Tension and Compression—IP67 Rated (Legal-for-Trade)
With 4 Threaded Holes
22 lbs. (10 kg)	±0.07 oz. (±2 g)	0.01 lbs. (0.001 kg)	1/4"-20	5 15/16"	1"	1 9/16"	Aluminum	15° to 100°	00000000	000000
44 lbs. (20 kg)	±0.14 oz. (±4 g)	0.01 lbs. (0.001 kg)	1/4"-20	5 15/16"	1"	1 9/16"	Aluminum	15° to 100°	00000000	000000
110 lbs. (50 kg)	±0.35 oz. (±10 g)	0.01 lbs. (0.01 kg)	1/4"-20	5 15/16"	1"	1 9/16"	Aluminum	15° to 100°	00000000	000000
220 lbs. (100 kg)	±0.7 oz. (±20 g)	0.01 oz. (1 g)	1/4"-20	5 15/16"	1"	1 9/16"	Aluminum	15° to 100°	00000000	000000
Wireless PC Connection Kits
For Measuring Compression
With 8 Threaded Holes
1,650 lbs. (750 kg)	±7.9 oz (±225 g)	0.1 lbs. (0.01 kg)	M8 × 1.25 mm	6 7/8"	2 3/8"	2 9/16"	Aluminum	15° to 100°	0000000	00000000

Round with Button

Round sensors have a low profile to fit in tight-clearance spaces. Those with a button are often used to measure weight in packaging machinery and for pressure sensing in medical device prototypes.

PC Connection Kits
Capacity	Accuracy	Measuring Increments	Dia.	Ht.	Sensor Material	Temp. Range, °F		Each
For Measuring Compression
4.4 lbs. (2 kg)	±0.7 oz. (±20 g)	0.1 lbs. (0.01 kg)	1/2"	1/4"	Alloy Steel	0° to 140°	00000000	000000000
10 lbs. (4.5 kg)	±0.8 oz. (±23 g)	0.001 lbs. (0.001 kg)	1 1/4"	13/32"	17-4 PH Stainless Steel	70° to 85°	00000000	000000
22 lbs. (10 kg)	±3.5 oz. (±100 g)	0.1 lbs. (0.1 kg)	1/2"	1/4"	Alloy Steel	0° to 140°	00000000	00000000
100 lbs. (45 kg)	±8 oz. (±225 g)	0.1 lbs. (0.001 kg)	1 1/4"	13/32"	17-4 PH Stainless Steel	70° to 85°	00000000	000000
200 lbs. (90 kg)	±1 lbs. (±450 g)	1 lbs. (0.01 kg)	1 1/4"	13/32"	17-4 PH Stainless Steel	70° to 85°	00000000	000000
For Measuring Compression—IP66 Rated
55 lbs. (25 kg)	±0.44 oz. (±12.5 g)	0.01 lbs. (0.01 kg)	2 1/16"	7/8"	Alloy Steel	0° to 140°	00000000	000000
110 lbs. (50 kg)	±0.88 oz. (±25 g)	0.01 lbs. (0.001 kg)	2 1/16"	7/8"	Alloy Steel	0° to 140°	00000000	000000
550 lbs. (250 kg)	±4.4 oz. (±125 g)	0.01 lbs. (0.01 kg)	2 1/16"	7/8"	Alloy Steel	0° to 140°	00000000	000000
1,100 lbs. (500 kg)	±8.8 oz. (±250 g)	0.1 lbs. (0.01 kg)	2 1/16"	7/8"	Alloy Steel	0° to 140°	00000000	000000
2,200 lbs. (1,000 kg)	±1.1 lbs. (±500 g)	0.1 lbs. (0.01 kg)	2 1/16"	7/8"	Alloy Steel	0° to 140°	00000000	000000
4,405 lbs. (2,000 kg)	±2.2 lbs. (±1 kg)	0.1 lbs. (0.1 kg)	3 1/4"	1 3/4"	Alloy Steel	0° to 140°	0000000	00000000
11,020 lbs. (5,000 kg)	±5.5 lbs. (±2.5 kg)	1 lbs. (0.1 kg)	3 1/4"	1 3/4"	Alloy Steel	0° to 140°	0000000	00000000
PLC Connection Kits
For Measuring Compression
4.4 lbs. (2 kg)	±0.7 oz. (±20 g)	0.1 lbs. (0.01 kg)	1/2"	1/4"	Alloy Steel	0° to 140°	0000000	000000
22 lbs. (10 kg)	±3.5 oz. (±100 g)	0.1 lbs. (0.1 kg)	1/2"	1/4"	Alloy Steel	0° to 140°	00000000	000000
For Measuring Compression—IP66 Rated
55 lbs. (25 kg)	±0.44 oz. (±12.5 g)	0.01 lbs. (0.01 kg)	2 1/16"	7/8"	Alloy Steel	0° to 140°	00000000	000000
110 lbs. (50 kg)	±0.88 oz. (±25 g)	0.01 lbs. (0.001 kg)	2 1/16"	7/8"	Alloy Steel	0° to 140°	00000000	000000
220 lbs. (100 kg)	±1.8 oz. (±50 g)	0.01 lbs. (0.01 kg)	2 1/16"	7/8"	Alloy Steel	0° to 140°	0000000	000000
550 lbs. (250 kg)	±4.4 oz. (±125 g)	0.01 lbs. (0.01 kg)	2 1/16"	7/8"	Alloy Steel	0° to 140°	00000000	000000
1,100 lbs. (500 kg)	±8.8 oz. (±250 g)	0.1 lbs. (0.01 kg)	2 1/16"	7/8"	Alloy Steel	0° to 140°	00000000	000000
2,200 lbs. (1,000 kg)	±1.1 lbs. (±500 g)	0.1 lbs. (0.01 kg)	2 1/16"	7/8"	Alloy Steel	0° to 140°	00000000	000000
Wireless PC Connection Kits
For Measuring Compression—IP66 Rated
550 lbs. (250 kg)	±4.4 oz. (±125 g)	0.01 lbs. (0.01 kg)	2 1/16"	7/8"	Alloy Steel	0° to 140°	0000000	00000000
1,100 lbs. (500 kg)	±8.8 oz. (±250 g)	0.1 lbs. (0.01 kg)	2 1/16"	7/8"	Alloy Steel	0° to 140°	0000000	00000000
2,200 lbs. (1,000 kg)	±1.1 lbs. (±500 g)	0.1 lbs. (0.01 kg)	2 1/16"	7/8"	Alloy Steel	0° to 140°	0000000	00000000
4,405 lbs. (2,000 kg)	±2.2 lbs. (±1 kg)	0.1 lbs. (0.1 kg)	3 1/4"	1 3/4"	Alloy Steel	0° to 140°	0000000	00000000
11,020 lbs. (5,000 kg)	±5.5 lbs. (±2.5 kg)	1 lbs. (0.1 kg)	3 1/4"	1 3/4"	Alloy Steel	0° to 140°	0000000	00000000

Round with Threaded Through Hole

Round sensors have a low profile to fit in tight-clearance spaces. Those with a threaded through hole are also known as pancake load cells. They can be bolted to surfaces in any orientation and are commonly used to measure clamping forces.

PC Connection Kits
Capacity	Accuracy	Measuring Increments	Load Connection Thread Size	Dia.	Ht.	Sensor Material	Temp. Range, °F		Each
For Measuring Tension and Compression
550 lbs. (250 kg)	±4.4 oz. (±125 g)	0.01 lbs. (0.01 kg)	M10 × 1.5 mm	2 15/16"	1"	Alloy Steel	0° to 140°	00000000	000000000
1,100 lbs. (500 kg)	±8.8 oz. (±250 g)	0.1 lbs. (0.01 kg)	M10 × 1.5 mm	2 15/16"	1"	Alloy Steel	0° to 140°	00000000	00000000
2,200 lbs. (1,000 kg)	±1.1 lbs. (±500 g)	0.1 lbs. (0.01 kg)	M12 × 1.75 mm	3 9/16"	1"	Alloy Steel	0° to 140°	00000000	00000000
5,510 lbs. (2,500 kg)	±2.8 lbs. (±1.25 kg)	0.1 lbs. (0.1 kg)	M12 × 1.75 mm	3 9/16"	1"	Alloy Steel	0° to 140°	0000000	00000000
11,020 lbs. (5,000 kg)	±5.5 lbs. (±2.5 kg)	1 lbs. (0.1 kg)	M24 × 3 mm	5 1/2"	1 3/4"	Alloy Steel	0° to 140°	00000000	00000000
For Measuring Compression
1,100 lbs. (500 kg)	±8.8 oz. (±250 g)	0.1 lbs. (0.01 kg)	M10 × 1.5 mm	2 15/16"	1"	Alloy Steel	0° to 140°	00000000	00000000
2,200 lbs. (1,000 kg)	±1.1 lbs. (±500 g)	0.1 lbs. (0.01 kg)	M12 × 1.75 mm	3 9/16"	1"	Alloy Steel	0° to 140°	00000000	00000000
5,510 lbs. (2,500 kg)	±2.8 lbs. (±1.25 kg)	0.1 lbs. (0.1 kg)	M12 × 1.75 mm	3 9/16"	1"	Alloy Steel	0° to 140°	0000000	00000000
11,020 lbs. (5,000 kg)	±5.5 lbs. (±2.5 kg)	1 lbs. (0.1 kg)	M24 × 3 mm	5 1/2"	1 3/4"	Alloy Steel	0° to 140°	00000000	00000000
PLC Connection Kits
For Measuring Tension and Compression
550 lbs. (250 kg)	±4.4 oz. (±125 g)	0.01 lbs. (0.01 kg)	M10 × 1.5 mm	2 15/16"	1"	Alloy Steel	0° to 140°	00000000	00000000
1,100 lbs. (500 kg)	±8.8 oz. (±250 g)	0.1 lbs. (0.01 kg)	M10 × 1.5 mm	2 15/16"	1"	Alloy Steel	0° to 140°	00000000	00000000
2,200 lbs. (1,000 kg)	±1.1 lbs. (±500 g)	0.1 lbs. (0.01 kg)	M12 × 1.75 mm	3 9/16"	1"	Alloy Steel	0° to 140°	00000000	00000000
5,510 lbs. (2,500 kg)	±2.8 lbs. (±1.25 kg)	0.1 lbs. (0.1 kg)	M12 × 1.75 mm	3 9/16"	1"	Alloy Steel	0° to 140°	00000000	00000000
11,020 lbs. (5,000 kg)	±5.5 lbs. (±2.5 kg)	1 lbs. (0.1 kg)	M24 × 3 mm	5 1/2"	1 3/4"	Alloy Steel	0° to 140°	00000000	00000000
For Measuring Compression
1,100 lbs. (500 kg)	±8.8 oz. (±250 g)	0.1 lbs. (0.01 kg)	M10 × 1.5 mm	2 15/16"	1"	Alloy Steel	0° to 140°	00000000	000000
2,200 lbs. (1,000 kg)	±1.1 lbs. (±500 g)	0.1 lbs. (0.01 kg)	M12 × 1.75 mm	3 9/16"	1"	Alloy Steel	0° to 140°	00000000	000000
5,510 lbs. (2,500 kg)	±2.8 lbs. (±1.25 kg)	0.1 lbs. (0.1 kg)	M12 × 1.75 mm	3 9/16"	1"	Alloy Steel	0° to 140°	00000000	000000
11,020 lbs. (5,000 kg)	±5.5 lbs. (±2.5 kg)	1 lbs. (0.1 kg)	M24 × 3 mm	5 1/2"	1 3/4"	Alloy Steel	0° to 140°	00000000	000000

Round with Threaded Standoff

Round sensors have a low profile to fit in tight-clearance spaces.

								PC Connection Kits
Capacity	Accuracy	Measuring Increments	Load Connection Thread Size	Dia.	Ht.	Sensor Material	Temp. Range, °F		Each
For Measuring Compression
50 lbs. (22 kg)	±1.2 oz. (±33 g)	0.1 lbs. (0.01 kg)	1/2"-20	3 1/4"	1 3/16"	17-4 PH Stainless Steel	70° to 85°	00000000	0000000
100 lbs. (45 kg)	±2.4 oz. (±68 g)	0.01 lbs. (0.001 kg)	1/2"-20	3 1/4"	1 3/16"	17-4 PH Stainless Steel	70° to 85°	00000000	000000
250 lbs. (113 kg)	±6 oz. (±170 g)	0.01 lbs. (0.1 kg)	1/2"-20	3 1/4"	1 3/16"	17-4 PH Stainless Steel	70° to 85°	0000000	000000
500 lbs. (225 kg)	±12 oz. (±338 g)	0.01 lbs. (0.1 kg)	1/2"-20	3 1/4"	1 3/16"	17-4 PH Stainless Steel	70° to 85°	00000000	000000
1,000 lbs. (450 kg)	±2.5 lbs. (±1.13 kg)	0.1 lbs. (0.01 kg)	1/2"-20	3 1/4"	1 3/16"	17-4 PH Stainless Steel	70° to 85°	00000000	000000
2,500 lbs. (1,130 kg)	±25 lbs. (±11.3 kg)	1 lbs. (1 kg)	1/2"-20	3 1/4"	1 3/16"	17-4 PH Stainless Steel	70° to 85°	00000000	000000

Round with Dual-Sided Threaded Standoff

Round sensors have a low profile to fit in tight-clearance spaces.

								PLC/PC Connection Kits
Capacity	Accuracy	Measuring Increments	Load Connection Thread Size	Dia.	Ht.	Sensor Material	Temp. Range, °F		Each
For Measuring Tension and Compression
50 lbs. (22 kg)	±1.2 oz. (±33 g)	0.1 lbs. (0.01 kg)	1/2"-20	3 1/4"	2 3/16"	17-4 PH Stainless Steel	70° to 85°	00000000	000000000
250 lbs. (113 kg)	±6 oz. (±170 g)	0.01 lbs. (0.1 kg)	1/2"-20	3 1/4"	2 3/16"	17-4 PH Stainless Steel	70° to 85°	0000000	00000000
1,000 lbs. (450 kg)	±2.5 lbs. (±1.13 kg)	0.1 lbs. (0.01 kg)	1/2"-20	3 1/4"	2 3/16"	17-4 PH Stainless Steel	70° to 85°	00000000	00000000
2,500 lbs. (1,130 kg)	±25 lbs. (±11.3 kg)	1 lbs. (1 kg)	1/2"-20	3 1/4"	2 3/16"	17-4 PH Stainless Steel	70° to 85°	00000000	00000000

Round with Threaded Stud

Round sensors have a low profile to fit in tight-clearance spaces. Those with a threaded stud screw into equipment.

			Load Connection
Cap.	Accuracy	Measuring Increments	Thread Size	Stud Lg.	Dia.	Ht.	Sensor Material	Temp. Range, °F		Each
PC Connection Kits
For Measuring Tension and Compression—IP66 Rated
110 lbs. (50 kg)	±8.8 oz. (±250 g)	0.01 lbs. (0.001 kg)	M12 × 1.75 mm	1"	2"	2"	Alloy Steel	0° to 140°	00000000	000000000
220 lbs. (100 kg)	±1.1 lbs. (±500 g)	0.01 lbs. (0.01 kg)	M12 × 1.75 mm	1"	2"	2"	Alloy Steel	0° to 140°	00000000	00000000
440 lbs. (200 kg)	±2.2 lbs. (±1 kg)	0.01 lbs. (0.01 kg)	M12 × 1.75 mm	1"	2"	2"	Alloy Steel	0° to 140°	00000000	00000000
1,100 lbs. (500 kg)	±5.5 lbs. (±2.5 kg)	0.01 lbs. (0.01 kg)	M12 × 1.75 mm	1"	2"	2"	Alloy Steel	0° to 140°	00000000	00000000
For Measuring Compression
50 lbs. (22 kg)	±4 oz. (±110 g)	0.1 lbs. (0.01 kg)	10-32	1/2"	1 1/4"	13/16"	17-4 PH Stainless Steel	70° to 85°	00000000	000000
PLC Connection Kits
For Measuring Tension and Compression—IP66 Rated
110 lbs. (50 kg)	±8.8 oz. (±250 g)	0.01 lbs. (0.001 kg)	M12 × 1.75 mm	1"	2"	2"	Alloy Steel	0° to 140°	00000000	00000000
220 lbs. (100 kg)	±1.1 lbs. (±500 g)	0.01 lbs. (0.01 kg)	M12 × 1.75 mm	1"	2"	2"	Alloy Steel	0° to 140°	00000000	00000000
440 lbs. (200 kg)	±2.2 lbs. (±1 kg)	0.01 lbs. (0.01 kg)	M12 × 1.75 mm	1"	2"	2"	Alloy Steel	0° to 140°	0000000	00000000
1,100 lbs. (500 kg)	±5.5 lbs. (±2.5 kg)	0.01 lbs. (0.01 kg)	M12 × 1.75 mm	1"	2"	2"	Alloy Steel	0° to 140°	00000000	00000000

Round with Dual-Sided Threaded Stud

Round sensors have a low profile to fit in tight-clearance spaces. Those with a dual-sided threaded stud can monitor push-pull forces. For example, they might be used to test the durability of products that repeatedly fold and unfold.

			Load Connection
Capacity	Accuracy	Measuring Increments	Thread Size	Stud Lg.	Dia.	Ht.	Sensor Material	Temp. Range, °F		Each
PC Connection Kits
For Measuring Tension and Compression
2.2 lbs. (1 kg)	±0.35 oz. (±10 g)	0.001 oz. (0.1 g)	M3 × 0.5 mm	5/16"	1"	1 1/4"	Alloy Steel	0° to 140°	00000000	000000000
4.4 lbs. (2 kg)	±0.7 oz. (±20 g)	0.001 oz. (0.1 g)	M3 × 0.5 mm	5/16"	1"	1 1/4"	Alloy Steel	0° to 140°	00000000	00000000
11 lbs. (5 kg)	±1.8 oz. (±50 g)	0.01 oz. (0.1 g)	M5 × 0.8 mm	5/16"	1"	1 7/16"	Alloy Steel	0° to 140°	00000000	00000000
22 lbs. (10 kg)	±3.5 oz. (±100 g)	0.01 lbs. (0.001 kg)	M5 × 0.8 mm	5/16"	1"	1 7/16"	Alloy Steel	0° to 140°	0000000	00000000
100 lbs. (45 kg)	±8 oz. (±225 g)	0.1 lbs. (0.001 kg)	1/4"-28	1/2"	1 1/4"	1 13/16"	17-4 PH Stainless Steel	70° to 85°	00000000	00000000
220 lbs. (100 kg)	±2.2 lbs. (±1 kg)	0.01 lbs. (0.001 kg)	M6 × 1 mm	5/16"	1"	1 7/16"	Alloy Steel	0° to 140°	00000000	00000000
For Measuring Compression
2.2 lbs. (1 kg)	±0.35 oz. (±10 g)	0.001 oz. (0.1 g)	M3 × 0.5 mm	5/16"	1"	1 1/4"	Alloy Steel	0° to 140°	00000000	00000000
4.4 lbs. (2 kg)	±0.7 oz. (±20 g)	0.001 oz. (0.1 g)	M3 × 0.5 mm	5/16"	1"	1 1/4"	Alloy Steel	0° to 140°	00000000	00000000
220 lbs. (100 kg)	±2.2 lbs. (±1 kg)	0.01 lbs. (0.001 kg)	M6 × 1 mm	5/16"	1"	1 7/16"	Alloy Steel	0° to 140°	00000000	00000000
PLC Connection Kits
For Measuring Tension and Compression
2.2 lbs. (1 kg)	±0.35 oz. (±10 g)	0.001 oz. (0.1 g)	M3 × 0.5 mm	5/16"	1"	1 1/4"	Alloy Steel	0° to 140°	00000000	00000000
4.4 lbs. (2 kg)	±0.7 oz. (±20 g)	0.001 oz. (0.1 g)	M3 × 0.5 mm	5/16"	1"	1 1/4"	Alloy Steel	0° to 140°	00000000	00000000
11 lbs. (5 kg)	±1.8 oz. (±50 g)	0.01 oz. (0.1 g)	M5 × 0.8 mm	5/16"	1"	1 7/16"	Alloy Steel	0° to 140°	00000000	00000000
22 lbs. (10 kg)	±3.5 oz. (±100 g)	0.01 lbs. (0.001 kg)	M5 × 0.8 mm	5/16"	1"	1 7/16"	Alloy Steel	0° to 140°	00000000	00000000
220 lbs. (100 kg)	±2.2 lbs. (±1 kg)	0.01 lbs. (0.001 kg)	M6 × 1 mm	5/16"	1"	1 7/16"	Alloy Steel	0° to 140°	00000000	00000000

S-Shape with Threaded Through Holes

S-shape sensors with threaded through holes monitor and test tension in wires, cords, ropes, and harnesses. They’re often used in hanging scales.

PC Connection Kits
Capacity	Accuracy	Measuring Increments	Load Connection Thread Size	Lg.	Wd.	Ht.	Sensor Material	Temp. Range, °F		Each
For Measuring Tension and Compression
11 lbs. (5 kg)	±0.88 oz. (±25 g)	0.01 lbs. (0.001 kg)	M3 × 0.5 mm	11/16"	1/4"	3/4"	Alloy Steel	0° to 140°	00000000	000000000
22 lbs. (10 kg)	±1.8 oz. (±50 g)	0.1 lbs. (0.01 kg)	M3 × 0.5 mm	11/16"	1/4"	3/4"	Alloy Steel	0° to 140°	00000000	00000000
25 lbs. (11 kg)	±0.08 oz. (±2.2 g)	0.01 lbs. (0.001 kg)	1/4"-28	2"	1/2"	2 1/2"	Alloy Steel	0° to 140°	0000000	00000000
50 lbs. (22 kg)	±0.16 oz. (±4.4 g)	0.01 lbs. (0.001 kg)	1/4"-28	2"	1/2"	2 1/2"	Alloy Steel	0° to 140°	00000000	00000000
100 lbs. (45 kg)	±0.32 oz. (±9 g)	0.01 lbs. (0.01 kg)	1/4"-28	2"	1/2"	2 1/2"	Alloy Steel	0° to 140°	00000000	00000000
110 lbs. (50 kg)	±8.8 oz. (±250 g)	0.1 lbs. (0.001 kg)	M4 × 0.7 mm	11/16"	1/4"	3/4"	Alloy Steel	0° to 140°	00000000	00000000
250 lbs. (113 kg)	±0.8 oz. (±23 g)	0.01 lbs. (0.001 kg)	1/2"-20	2"	3/4"	3"	Alloy Steel	0° to 140°	00000000	00000000
500 lbs. (225 kg)	±1.6 oz. (±45 g)	0.1 lbs. (0.01 kg)	1/2"-20	2"	3/4"	3"	Alloy Steel	0° to 140°	00000000	00000000
1,000 lbs. (450 kg)	±3.2 oz. (±90 g)	0.01 lbs. (0.01 kg)	1/2"-20	2"	3/4"	3"	Alloy Steel	0° to 140°	00000000	00000000
2,500 lbs. (1,130 kg)	±8 oz. (±226 g)	0.1 lbs. (0.1 kg)	1/2"-20	2"	1"	3"	Alloy Steel	0° to 140°	00000000	00000000
5,000 lbs. (2,265 kg)	±1 lbs. (±453 g)	0.1 lbs. (0.1 kg)	3/4"-16	3"	1"	4 1/4"	Alloy Steel	0° to 140°	00000000	00000000
10,000 lbs. (4,535 kg)	±2 lbs. (±907 g)	0.1 lbs. (0.1 kg)	3/4"-16	3"	1"	4 1/4"	Alloy Steel	0° to 140°	00000000	00000000
20,000 lbs. (9,070 kg)	±4 lbs. (±1.8 kg)	1 lbs. (0.1 kg)	1 1/4"-12	5"	2"	7"	Alloy Steel	0° to 140°	00000000	00000000
40,000 lbs. (18,140 kg)	±8 lbs. (±3.6 kg)	1 lbs. (1 kg)	1 1/2"-12	5 1/2"	2 3/8"	7 3/8"	Alloy Steel	0° to 140°	000000	00000000
For Measuring Tension and Compression—IP67 Rated (Legal-for-Trade)
1,000 lbs. (450 kg)	±4.8 oz. (±135 g)	0.1 lbs. (0.01 kg)	1/2"-20	2"	3/4"	2 1/2"	Alloy Steel	-40° to 175°	0000000	00000000
2,500 lbs. (1,130 kg)	±12 oz. (±338 g)	0.1 lbs. (0.1 kg)	3/4"-16	3"	1"	4"	Alloy Steel	-40° to 175°	0000000	00000000
5,000 lbs. (2,265 kg)	±1.5 lbs. (±680 g)	1 lbs. (0.1 kg)	1/2"-20	2"	1"	2 1/2"	Alloy Steel	-40° to 175°	0000000	00000000
PLC Connection Kits
For Measuring Tension and Compression
50 lbs. (22 kg)	±0.16 oz. (±4.4 g)	0.01 lbs. (0.001 kg)	1/4"-28	2"	1/2"	2 1/2"	Alloy Steel	0° to 140°	00000000	00000000
50 lbs. (22 kg)	±1 lbs. (±453 g)	0.1 lbs. (0.1 kg)	3/4"-16	3"	1"	4 1/4"	Alloy Steel	0° to 140°	0000000	00000000
100 lbs. (45 kg)	±0.32 oz. (±9 g)	0.01 lbs. (0.01 kg)	1/4"-28	2"	1/2"	2 1/2"	Alloy Steel	0° to 140°	00000000	00000000
110 lbs. (50 kg)	±8.8 oz. (±250 g)	0.1 lbs. (0.001 kg)	M4 × 0.7 mm	11/16"	1/4"	3/4"	Alloy Steel	0° to 140°	00000000	00000000
250 lbs. (113 kg)	±0.8 oz. (±23 g)	0.01 lbs. (0.001 kg)	1/2"-20	2"	3/4"	3"	Alloy Steel	0° to 140°	00000000	00000000
500 lbs. (225 kg)	±1.6 oz. (±45 g)	0.1 lbs. (0.01 kg)	1/2"-20	2"	3/4"	3"	Alloy Steel	0° to 140°	00000000	00000000
1,000 lbs. (450 kg)	±3.2 oz. (±90 g)	0.01 lbs. (0.01 kg)	1/2"-20	2"	3/4"	3"	Alloy Steel	0° to 140°	00000000	00000000
2,500 lbs. (1,130 kg)	±8 oz. (±226 g)	0.1 lbs. (0.1 kg)	1/2"-20	2"	1"	3"	Alloy Steel	0° to 140°	00000000	00000000
10,000 lbs. (4,535 kg)	±2 lbs. (±907 g)	0.1 lbs. (0.1 kg)	3/4"-16	3"	1"	4 1/4"	Alloy Steel	0° to 140°	00000000	00000000
Wireless PC Connection Kits
For Measuring Tension and Compression
1,000 lbs. (450 kg)	±3.2 oz. (±90 g)	0.01 lbs. (0.01 kg)	1/2"-20	2"	3/4"	3"	Alloy Steel	0° to 140°	0000000	00000000
2,500 lbs. (1,130 kg)	±8 oz. (±226 g)	0.1 lbs. (0.1 kg)	1/2"-20	2"	1"	3"	Alloy Steel	0° to 140°	0000000	00000000
5,000 lbs. (2,265 kg)	±1 lbs. (±453 g)	0.1 lbs. (0.1 kg)	3/4"-16	3"	1"	4 1/4"	Alloy Steel	0° to 140°	0000000	00000000
10,000 lbs. (4,535 kg)	±2 lbs. (±907 g)	0.1 lbs. (0.1 kg)	3/4"-16	3"	1"	4 1/4"	Alloy Steel	0° to 140°	0000000	00000000
20,000 lbs. (9,070 kg)	±4 lbs. (±1.8 kg)	1 lbs. (0.1 kg)	1 1/4"-12	5"	2"	7"	Alloy Steel	0° to 140°	0000000	00000000

Accessories

With Female USB-A Connections

Display

		Each
USB Hub for PC Connection Kits	00000000	000000
Data-Recording Software	00000000	000000
LCD Display for PC and PLC/PC Connection Kits—For 1 Sensor	00000000	000000
LCD Display for PC and PLC/PC Connection Kits—For 4 Sensors	00000000	000000