Patch concrete floors and stairs with these compounds.

Use these two-part compounds to patch concrete floors and stairs in cold environments, such as freezers. At room temperature, they cure faster than any of our other concrete patching compounds.

Repair sidewalks and factory floors in areas with heavy pedestrian traffic. They can also be used to fill minor depressions and cracks.

Fill cracks in horizontal, vertical, and overhead concrete surfaces.

Fill cracks up to 10" deep on vertical and overhead surfaces.

Stop slow-flowing and weeping leaks in concrete. Also known as hydraulic cement, these crack fillers begin to harden in three to five minutes to create a permanent fix that won't shrink.

Fill in and shape horizontal, vertical, and overhead concrete surfaces, such as steps and columns.

An easy way to make repairs in the field. Cut patches to size, peel off the backing, and press into place. Expose them to sunlight or a UV lamp and they begin to harden immediately.

Make castings and fill voids with these two-part pourable epoxies.

Used on ceramic, concrete, and stone floor and wall tiles, grout consists of fine sand, masonry cement, and coloring.

Thinner than non-sagging sealants, these flow easily into cracks and have a smooth finish.

The textured finish matches concrete surfaces.

These non-sagging sealants will not drip while hardening on vertical and overhead surfaces.

These non-sagging sealants will not drip while hardening on vertical and overhead surfaces.

Apply these sealants in cold temperatures, on wet surfaces, and even through running water.

With chemical and metal additives that are picked up by X-ray machines and metal detectors, these sealants are designed to help you comply with Hazard Analysis and Critical Control Point (HACCP) programs in food-processing facilities.

Clear enough to read through, this UV-resistant sealant allows optimal light transmission for use with solar cells and fiber optics.

Compliant with ASTM E-595, these sealants produce almost no volatile materials in a vacuum.

Also known as thumb-grade caulk, this forms a non-hardening, moisture-resistant seal that remains pliable.

Mix a small amount of water-based paint with this caulk to match the color of your surface.

Designed to withstand extreme environments, these fluoroelastomer sealants have excellent resistance to harsh chemicals. They’re non-sagging, so they won't drip from vertical and overhead surfaces.

Fix roof leaks in cold and wet conditions. These sealants can even be applied underwater.

These coatings are more durable than our standard coatings for concrete floors. They provide a stain-resistant finish that protects your floors from moisture, chemicals, foot traffic, and hand carts.

Designed for marine environments, these coatings stand up to harsh chemicals, such as sulfuric acid, citric acid, and diesel fuel. They have excellent abrasion, impact, and UV resistance, as well as low hardening temperatures.

Seal freshly finished concrete to prevent it from drying too quickly during the curing process. These coatings also protect against mild chemicals, salts, soaps, and detergents.

These coatings are some of the thickest and most durable on the market. They protect against abrasion and resist moisture and chemicals.

Keep working when temperatures drop—these coatings can be applied in temperatures down to 20° F, when other coatings would fail. Thicker than polyurethane and paint, they protect against abrasion and resist moisture and chemicals.

Used to insulate, create grips, and color-code components, these coatings resist high temperatures, light abrasion, and corrosion.

Designed for use in truck beds, these durable coatings create a tough, textured finish that prevents objects from sliding. Made from polyurethane, they resist abrasion and won’t fade from exposure to UV light.

Apply these coatings in temperatures down to 20° F, when other coatings would fail. They handle high humidity and have superior abrasion, impact, and UV resistance while providing great color and gloss retention.

Longer-lasting than antislip tape, these coatings contain grit to provide traction. They’re good for areas with pedestrian traffic.

These provide the highest traction and impact resistance of our antislip coatings. Longer-lasting than antislip tape, these coatings contain grit to provide traction.

Able to withstand temperatures of up to 2000° F, these coatings absorb heat and release it later. Use them to improve the thermal efficiency of heaters, furnaces, and ovens to reduce energy costs. Also known as high-emissivity coatings.

Also known as coal tar epoxy, these coatings are our most resistant to abrasion, chemicals, and corrosion on concrete and steel. They can be immersed in salt water and fresh water.

Seal brick, mortar, and concrete to prevent water damage. These coatings create a thin, clear layer that sits on the surface of masonry and repels water.