About Grease
More
About Lubricants
More
Electrically Conductive Antiseize Lubricants
Copper allows these lubricants to conduct electricity, while graphite gives them good chemical and corrosion resistance. Also known as thread lubricants, antiseize lubricants prevent threaded fasteners and close-fitting parts from locking together due to corrosion, contamination, or heat.
Loctite® C5-A Copper-Based Anti-Seize lubricants can be used with salt water and petroleum-based chemicals. LB 8065 comes as a stick for no-mess application.
Lubricants that meet MIL-A-907 and MIL-PRF-907 have been tested to prevent corrosion of copper and for antiseize properties when used with steel nuts and studs.
Dielectric strength measures the maximum voltage a lubricant can withstand without losing its insulating properties. The higher the dielectric strength, the better its quality as an insulator.
Electrical resistivity is a measure of how well a material opposes the flow of electricity. The lower the rating, the more electricity it conducts.
Lubricants that cannot be sold to the areas listed exceed local regulatory limits on VOC (volatile organic compounds).
Container | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Size | Net Weight | Type | Additive | Electrical Resistivity | Dielectric Strength, V/mil | Temp. Range, °F | Color | Specifications Met | Compatible With | Cannot Be Sold To | Each | |
Loctite® LB 8008 C5-A Copper-Based Anti-Seize | ||||||||||||
| __ | 0.07 oz. | One-Time-Use Pack | Copper, Graphite | Not Rated | Not Rated | -20° to 1800° | Copper | __ | Aluminum, Brass, Copper, Iron, Plastic, Stainless Steel, Steel | __ | 000000 | 00000 |
| __ | 0.24 oz. | One-Time-Use Pack | Copper, Graphite | Not Rated | Not Rated | -20° to 1800° | Copper | __ | Aluminum, Brass, Copper, Iron, Plastic, Stainless Steel, Steel | __ | 0000000 | 0000 |
| 1 fl. oz. | __ | Tube | Copper, Graphite | Not Rated | Not Rated | -20° to 1800° | Copper | __ | Aluminum, Brass, Copper, Iron, Plastic, Stainless Steel, Steel | __ | 0000000 | 00000 |
| 4 fl. oz. | __ | Brush-Top Can | Copper, Graphite | Not Rated | Not Rated | -20° to 1800° | Copper | __ | Aluminum, Brass, Copper, Iron, Plastic, Stainless Steel, Steel | __ | 0000000 | 00000 |
| 4 fl. oz. | __ | Tube | Copper, Graphite | Not Rated | Not Rated | -20° to 1800° | Copper | __ | Aluminum, Brass, Copper, Iron, Plastic, Stainless Steel, Steel | __ | 0000000 | 00000 |
| 8 fl. oz. | __ | Brush-Top Can | Copper, Graphite | Not Rated | Not Rated | -20° to 1800° | Copper | __ | Aluminum, Brass, Copper, Iron, Plastic, Stainless Steel, Steel | __ | 0000000 | 00000 |
| 10 fl. oz. | __ | Brush-Top Can | Copper, Graphite | Not Rated | Not Rated | -20° to 1800° | Copper | __ | Aluminum, Brass, Copper, Iron, Plastic, Stainless Steel, Steel | __ | 0000000 | 00000 |
| __ | 1 lbs. | Brush-Top Can | Copper, Graphite | Not Rated | Not Rated | -20° to 1800° | Copper | __ | Aluminum, Brass, Copper, Iron, Plastic, Stainless Steel, Steel | __ | 0000000 | 00000 |
| __ | 1 lbs. | Can | Copper, Graphite | Not Rated | Not Rated | -20° to 1800° | Copper | __ | Aluminum, Brass, Copper, Iron, Plastic, Stainless Steel, Steel | __ | 0000000 | 00000 |
| __ | 2 1/2 lbs. | Can | Copper, Graphite | Not Rated | Not Rated | -20° to 1800° | Copper | __ | Aluminum, Brass, Copper, Iron, Plastic, Stainless Steel, Steel | __ | 000000 | 00000 |
| __ | 8 lbs. | Can | Copper, Graphite | Not Rated | Not Rated | -20° to 1800° | Copper | __ | Aluminum, Brass, Copper, Iron, Plastic, Stainless Steel, Steel | __ | 0000000 | 000000 |
| __ | 42 lbs. | Pail | Copper, Graphite | Not Rated | Not Rated | -20° to 1800° | Copper | __ | Aluminum, Brass, Copper, Iron, Plastic, Stainless Steel, Steel | __ | 0000000 | 000000 |
Loctite® LB 8065 C5-A Copper-Based Anti-Seize | ||||||||||||
| __ | 0.71 oz. | Stick | Copper, Graphite | Not Rated | Not Rated | Not Rated to 1800° | Copper | __ | Aluminum, Brass, Copper, Iron, Plastic, Stainless Steel, Steel | __ | 0000000 | 00000 |
Lubricants | ||||||||||||
| __ | 12 oz. | Aerosol Can | Copper, Graphite | 3.5×10-9 ohms-cm | 13.4 | -65° to 2000° | Copper | MIL-A-907, MIL-PRF-907 | Aluminum, Brass, Carbide, Copper, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium | CA, Canada | 0000000 | 00000 |
| 4 fl. oz. | __ | Brush-Top Can | Copper, Graphite | 3.5×10-9 ohms-cm | 13.4 | -65° to 2000° | Copper | MIL-A-907, MIL-PRF-907 | Aluminum, Brass, Carbide, Copper, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium | __ | 0000000 | 00000 |
| 8 fl. oz. | __ | Brush-Top Can | Copper, Graphite | 3.5×10-9 ohms-cm | 13.4 | -65° to 2000° | Silver | MIL-PRF-907 | Aluminum, Brass, Carbide, Copper, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium | __ | 00000000 | 00000 |
| 8 fl. oz. | __ | Brush-Top Can | Copper, Graphite | 3.5×10-9 ohms-cm | 13.4 | -65° to 2000° | Copper | MIL-A-907, MIL-PRF-907 | Aluminum, Brass, Carbide, Copper, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium | __ | 0000000 | 00000 |
| 16 fl. oz. | __ | Grease Gun Cartridge | Copper, Graphite | 3.5×10-9 ohms-cm | 13.4 | -65° to 2000° | Copper | MIL-A-907, MIL-PRF-907 | Aluminum, Brass, Carbide, Copper, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium | __ | 0000000 | 00000 |
| __ | 1 lbs. | Brush-Top Can | Copper, Graphite | 3.5×10-9 ohms-cm | 13.4 | -65° to 2000° | Silver | MIL-PRF-907 | Aluminum, Brass, Carbide, Copper, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium | __ | 00000000 | 00000 |
| __ | 1 lbs. | Brush-Top Can | Copper, Graphite | 3.5×10-9 ohms-cm | 13.4 | -65° to 2000° | Copper | MIL-A-907, MIL-PRF-907 | Aluminum, Brass, Carbide, Copper, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium | __ | 0000000 | 00000 |
| __ | 2 lbs. | Can | Copper, Graphite | 3.5×10-9 ohms-cm | 13.4 | -65° to 2000° | Copper | MIL-A-907, MIL-PRF-907 | Aluminum, Brass, Carbide, Copper, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium | __ | 0000000 | 00000 |
| 1 gal. | __ | Can | Copper, Graphite | 3.5×10-9 ohms-cm | 13.4 | -65° to 2000° | Copper | MIL-A-907, MIL-PRF-907 | Aluminum, Brass, Carbide, Copper, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium | __ | 0000000 | 000000 |
Container | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Size | Net Weight | Type | Additive | Electrical Resistivity | Dielectric Strength, V/mil | Temp. Range, °F | Color | Specifications Met | Compatible With | Cannot Be Sold To | Pkg. Qty. | Pkg. | |
Lubricants | |||||||||||||
| __ | 12 oz. | Aerosol Can | Copper, Graphite | 3.5×10-9 ohms-cm | 13.4 | -65° to 2000° | Copper | MIL-A-907, MIL-PRF-907 | Aluminum, Brass, Carbide, Copper, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium | CA, Canada | 12 | 00000000 | 0000000 |
| 4 fl. oz. | __ | Brush-Top Can | Copper, Graphite | 3.5×10-9 ohms-cm | 13.4 | -65° to 2000° | Copper | MIL-A-907, MIL-PRF-907 | Aluminum, Brass, Carbide, Copper, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium | __ | 24 | 00000000 | 000000 |
| 8 fl. oz. | __ | Brush-Top Can | Copper, Graphite | 3.5×10-9 ohms-cm | 13.4 | -65° to 2000° | Silver | MIL-PRF-907 | Aluminum, Brass, Carbide, Copper, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium | __ | 12 | 000000000 | 000000 |
| 8 fl. oz. | __ | Brush-Top Can | Copper, Graphite | 3.5×10-9 ohms-cm | 13.4 | -65° to 2000° | Copper | MIL-A-907, MIL-PRF-907 | Aluminum, Brass, Carbide, Copper, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium | __ | 12 | 00000000 | 000000 |
| 16 fl. oz. | __ | Grease Gun Cartridge | Copper, Graphite | 3.5×10-9 ohms-cm | 13.4 | -65° to 2000° | Copper | MIL-A-907, MIL-PRF-907 | Aluminum, Brass, Carbide, Copper, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium | __ | 12 | 00000000 | 000000 |
| __ | 1 lbs. | Brush-Top Can | Copper, Graphite | 3.5×10-9 ohms-cm | 13.4 | -65° to 2000° | Silver | MIL-PRF-907 | Aluminum, Brass, Carbide, Copper, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium | __ | 12 | 000000000 | 000000 |
| __ | 1 lbs. | Brush-Top Can | Copper, Graphite | 3.5×10-9 ohms-cm | 13.4 | -65° to 2000° | Copper | MIL-A-907, MIL-PRF-907 | Aluminum, Brass, Carbide, Copper, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium | __ | 12 | 00000000 | 000000 |
| __ | 2 lbs. | Can | Copper, Graphite | 3.5×10-9 ohms-cm | 13.4 | -65° to 2000° | Copper | MIL-A-907, MIL-PRF-907 | Aluminum, Brass, Carbide, Copper, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium | __ | 6 | 00000000 | 000000 |
| 1 gal. | __ | Can | Copper, Graphite | 3.5×10-9 ohms-cm | 13.4 | -65° to 2000° | Copper | MIL-A-907, MIL-PRF-907 | Aluminum, Brass, Carbide, Copper, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium | __ | 4 | 00000000 | 000000 |
Electrically and Thermally Conductive Grease
A high silver content gives this grease excellent conductivity for applications where electricity and heat transfer are required. It is suitable for ESD (electrostatic discharge) and EMI (electromagnetic interference) shielding applications. Product regulations restrict sales to the listed jurisdictions/areas.
NLGI viscosity grade is a rating of a grease's consistency. NLGI 2 is about the consistency of peanut butter.
Electrical resistivity is a measure of how well a material opposes the flow of electricity. The lower the rating, the more electricity it conducts.
Thermal conductivity measures a material’s ability to transfer heat. The higher the rating, the more heat it transfers.
Grease lubricates most efficiently within the listed temperature range. Melting temperature is the point at which grease will fail and run out of equipment, leaving it to run dry.
Container | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| NLGI Viscosity Grade | Base Oil | Additive | Size, fl. oz. | Type | Temp. Range, °F | Melting Temp., °F | Electrical Resistivity, ohms-cm | Thermal Conductivity | Color | Cannot Be Sold To | Each | |
Silicone Thickener | ||||||||||||
| Not Rated | Synthetic | 100% Silver | 0.2 | Syringe | -70° to 485° | 490° | 0.010 | 40 Btu/hr. × in./sq. ft./°F | Silver | Outside United States and Canada | 0000000 | 000000 |
Grease without Thickener | ||||||||||||
| 2 | Synthetic | 75% Silver | 1 | Jar | -70° to 500° | Not Rated | 0.005 | 60 Btu/hr. × in./sq. ft./°F | Silver | __ | 0000000 | 000000 |
| 2 | Synthetic | 85% Silver | 0.5 | Jar | -40° to 300° | Not Rated | 0.005 | 60 Btu/hr. × in./sq. ft./°F | Silver | __ | 0000000 | 000000 |
| 2 | Synthetic | 85% Silver | 1 | Jar | -40° to 300° | Not Rated | 0.005 | 60 Btu/hr. × in./sq. ft./°F | Silver | __ | 0000000 | 000000 |
Conductive Liquid Gallium
A safe alternative to mercury in thermometers and thermostats, gallium transfers heat and electricity without toxic vapor that can be inhaled. Also known as Galinstan. Its low melting point means it's liquid at room temperature. When used next to parts that generate concentrated heat, it dissipates the heat quickly, making it good thermal interface material. It also allows electricity to pass throughout it, so it's often used in switches and electronics that must bend and flex.
Gallium clings to both metallic and nonmetallic surfaces such as glass and quartz. However, it eats away at most metal when used at high temperatures and dissolves aluminum even at ambient temperatures.
When choosing gallium, keep in mind its composition. The higher the gallium and indium content, the better it is at transferring heat. Gallium with tin reduces the melting point, but also decreases how well it transfers heat.
Material Composition | Container | ||||||||
|---|---|---|---|---|---|---|---|---|---|
| Gallium | Indium | Tin | Size, fl. oz. | Type | Melting Temperature, °F | Maximum Temperature, °F | For Use On | Each | |
| 66.5% | 20.5% | 13% | 0.1 | Syringe | 50° | 930° | Glass, Nickel Alloys, Quartz, Stainless Steel, Steel | 0000000 | 0000000 |
| 75.5% | 24.5% | __ | 0.1 | Syringe | 60° | 930° | Glass, Nickel Alloys, Quartz, Stainless Steel, Steel | 0000000 | 000000 |