Container Type Container Type |
|---|
|
Electrical Properties Electrical Properties |
|---|
|
Compatible With Compatible With |
|---|
|
|
For Use On For Use On |
|---|
Container Size Container Size |
|---|
Trade Name Trade Name |
|---|
|
Lubricant Type Lubricant Type |
|---|
|
Electrical Resistivity Electrical Resistivity |
|---|
|
Maximum Temperature Maximum Temperature |
|---|
|
Dielectric Strength Dielectric Strength |
|---|
|
|
Melting Temperature Melting Temperature |
|---|
|
|
Thermal Conductivity Thermal Conductivity |
|---|
|
Specifications Met Specifications Met |
|---|
|
|
About Lubricants
More
About Grease
More
Electrically Conductive Antiseize Lubricants
Copper allows these lubricants to conduct electricity, while graphite gives them good chemical and corrosion resistance. Also known as thread lubricants, antiseize lubricants prevent threaded fasteners and close-fitting parts from locking together due to corrosion, contamination, or heat.
Loctite® C5-A Copper-Based Anti-Seize lubricants can be used with salt water and petroleum-based chemicals. LB 8065 comes as a stick for no-mess application.
Lubricants that meet MIL-A-907F and MIL-PRF-907F have been tested to prevent corrosion of copper and for antiseize properties when used with steel nuts and studs.
Dielectric strength measures the maximum voltage a lubricant can withstand without losing its insulating properties. The higher the dielectric strength, the better its quality as an insulator.
Electrical resistivity is a measure of how well a material opposes the flow of electricity. The lower the rating, the more electricity it conducts.
Container | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Size | Type | Additive | Electrical Resistivity | Dielectric Strength, V/mil | Temp. Range, °F | Color | Specifications Met | Compatible With | Each | |
Loctite® LB 8008 C5-A Copper-Based Anti-Seize | ||||||||||
| 0.1 oz. | One-Time-Use Pack | Copper, Graphite | Not Rated | Not Rated | -20° to 1800° | Copper | __ | Aluminum, Brass, Copper, Iron, Plastic, Stainless Steel, Steel | 000000 | 00000 |
| 0.2 oz. | One-Time-Use Pack | Copper, Graphite | Not Rated | Not Rated | -20° to 1800° | Copper | __ | Aluminum, Brass, Copper, Iron, Plastic, Stainless Steel, Steel | 0000000 | 0000 |
| 1 oz. | Tube | Copper, Graphite | Not Rated | Not Rated | -20° to 1800° | Copper | __ | Aluminum, Brass, Copper, Iron, Plastic, Stainless Steel, Steel | 0000000 | 0000 |
| 4 oz. | Brush-Top Can | Copper, Graphite | Not Rated | Not Rated | -20° to 1800° | Copper | __ | Aluminum, Brass, Copper, Iron, Plastic, Stainless Steel, Steel | 0000000 | 00000 |
| 4 oz. | Tube | Copper, Graphite | Not Rated | Not Rated | -20° to 1800° | Copper | __ | Aluminum, Brass, Copper, Iron, Plastic, Stainless Steel, Steel | 0000000 | 00000 |
| 8 oz. | Brush-Top Can | Copper, Graphite | Not Rated | Not Rated | -20° to 1800° | Copper | __ | Aluminum, Brass, Copper, Iron, Plastic, Stainless Steel, Steel | 0000000 | 00000 |
| 10 oz. | Brush-Top Can | Copper, Graphite | Not Rated | Not Rated | -20° to 1800° | Copper | __ | Aluminum, Brass, Copper, Iron, Plastic, Stainless Steel, Steel | 0000000 | 00000 |
| 1 lbs. | Brush-Top Can | Copper, Graphite | Not Rated | Not Rated | -20° to 1800° | Copper | __ | Aluminum, Brass, Copper, Iron, Plastic, Stainless Steel, Steel | 0000000 | 00000 |
| 1 lbs. | Can | Copper, Graphite | Not Rated | Not Rated | -20° to 1800° | Copper | __ | Aluminum, Brass, Copper, Iron, Plastic, Stainless Steel, Steel | 0000000 | 00000 |
| 2.5 lbs. | Can | Copper, Graphite | Not Rated | Not Rated | -20° to 1800° | Copper | __ | Aluminum, Brass, Copper, Iron, Plastic, Stainless Steel, Steel | 000000 | 00000 |
| 8 lbs. | Can | Copper, Graphite | Not Rated | Not Rated | -20° to 1800° | Copper | __ | Aluminum, Brass, Copper, Iron, Plastic, Stainless Steel, Steel | 0000000 | 000000 |
| 42 lbs. | Pail | Copper, Graphite | Not Rated | Not Rated | -20° to 1800° | Copper | __ | Aluminum, Brass, Copper, Iron, Plastic, Stainless Steel, Steel | 0000000 | 000000 |
Loctite® LB 8065 C5-A Copper-Based Anti-Seize | ||||||||||
| 0.7 oz. | Stick | Copper, Graphite | Not Rated | Not Rated | Not Rated to 1800° | Copper | __ | Aluminum, Brass, Copper, Iron, Plastic, Stainless Steel, Steel | 0000000 | 0000 |
Lubricants | ||||||||||
| 4 oz. | Brush-Top Can | Copper, Graphite | 3.5×109 ohms-cm | 13.4 | -65° to 2000° | Copper | MIL-A-907F | Aluminum, Brass, Carbide, Copper, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium | 0000000 | 00000 |
| 8 oz. | Brush-Top Can | Copper, Graphite | 3.5×109 ohms-cm | 13.4 | -65° to 2000° | Silver | MIL-PRF-907F | Aluminum, Brass, Carbide, Copper, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium | 00000000 | 00000 |
| 8 oz. | Brush-Top Can | Copper, Graphite | 3.5×109 ohms-cm | 13.4 | -65° to 2000° | Copper | MIL-A-907F | Aluminum, Brass, Carbide, Copper, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium | 0000000 | 00000 |
| 12 oz. | Aerosol Can | Copper, Graphite | 3.5×109 ohms-cm | 13.4 | -65° to 2000° | Copper | MIL-A-907F | Aluminum, Brass, Carbide, Copper, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium | 0000000 | 00000 |
| 16 oz. | Grease Gun Cartridge | Copper, Graphite | 3.5×109 ohms-cm | 13.4 | -65° to 2000° | Copper | MIL-A-907F | Aluminum, Brass, Carbide, Copper, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium | 0000000 | 00000 |
| 1 lbs. | Brush-Top Can | Copper, Graphite | 3.5×109 ohms-cm | 13.4 | -65° to 2000° | Silver | MIL-PRF-907F | Aluminum, Brass, Carbide, Copper, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium | 00000000 | 00000 |
| 1 lbs. | Brush-Top Can | Copper, Graphite | 3.5×109 ohms-cm | 13.4 | -65° to 2000° | Copper | MIL-A-907F | Aluminum, Brass, Carbide, Copper, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium | 0000000 | 00000 |
| 2 lbs. | Can | Copper, Graphite | 3.5×109 ohms-cm | 13.4 | -65° to 2000° | Copper | MIL-A-907F | Aluminum, Brass, Carbide, Copper, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium | 0000000 | 00000 |
| 1 gal. | Can | Copper, Graphite | 3.5×109 ohms-cm | 13.4 | -65° to 2000° | Copper | MIL-A-907F | Aluminum, Brass, Carbide, Copper, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium | 0000000 | 000000 |
Container | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Size | Type | Additive | Electrical Resistivity | Dielectric Strength, V/mil | Temp. Range, °F | Color | Specifications Met | Compatible With | Pkg. Qty. | Pkg. | |
Lubricants | |||||||||||
| 4 oz. | Brush-Top Can | Copper, Graphite | 3.5×109 ohms-cm | 13.4 | -65° to 2000° | Copper | MIL-A-907F | Aluminum, Brass, Carbide, Copper, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium | 24 | 00000000 | 0000000 |
| 8 oz. | Brush-Top Can | Copper, Graphite | 3.5×109 ohms-cm | 13.4 | -65° to 2000° | Silver | MIL-PRF-907F | Aluminum, Brass, Carbide, Copper, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium | 12 | 000000000 | 000000 |
| 8 oz. | Brush-Top Can | Copper, Graphite | 3.5×109 ohms-cm | 13.4 | -65° to 2000° | Copper | MIL-A-907F | Aluminum, Brass, Carbide, Copper, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium | 12 | 00000000 | 000000 |
| 12 oz. | Aerosol Can | Copper, Graphite | 3.5×109 ohms-cm | 13.4 | -65° to 2000° | Copper | MIL-A-907F | Aluminum, Brass, Carbide, Copper, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium | 12 | 00000000 | 000000 |
| 16 oz. | Grease Gun Cartridge | Copper, Graphite | 3.5×109 ohms-cm | 13.4 | -65° to 2000° | Copper | MIL-A-907F | Aluminum, Brass, Carbide, Copper, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium | 12 | 00000000 | 000000 |
| 1 lbs. | Brush-Top Can | Copper, Graphite | 3.5×109 ohms-cm | 13.4 | -65° to 2000° | Silver | MIL-PRF-907F | Aluminum, Brass, Carbide, Copper, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium | 12 | 000000000 | 000000 |
| 1 lbs. | Brush-Top Can | Copper, Graphite | 3.5×109 ohms-cm | 13.4 | -65° to 2000° | Copper | MIL-A-907F | Aluminum, Brass, Carbide, Copper, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium | 12 | 00000000 | 000000 |
| 2 lbs. | Can | Copper, Graphite | 3.5×109 ohms-cm | 13.4 | -65° to 2000° | Copper | MIL-A-907F | Aluminum, Brass, Carbide, Copper, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium | 6 | 00000000 | 000000 |
| 1 gal. | Can | Copper, Graphite | 3.5×109 ohms-cm | 13.4 | -65° to 2000° | Copper | MIL-A-907F | Aluminum, Brass, Carbide, Copper, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium | 4 | 00000000 | 000000 |
Electrically and Thermally Conductive Grease
A high silver content gives this grease excellent conductivity for applications where electricity and heat transfer are required. It is suitable for ESD (electrostatic discharge) and EMI (electromagnetic interference) shielding applications.
NLGI viscosity grade is a rating of a grease's consistency. NLGI 2 is about the consistency of peanut butter.
Electrical resistivity is a measure of how well a material opposes the flow of electricity. The lower the rating, the more electricity it conducts.
Thermal conductivity measures a material’s ability to transfer heat. The higher the rating, the more heat it transfers.
Grease lubricates most efficiently within the listed temperature range. Melting temperature is the point at which grease will fail and run out of equipment, leaving it to run dry.
Container | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| NLGI Viscosity Grade | Base Oil | Additive | Size, oz. | Type | Temp. Range, °F | Melting Temp., °F | Electrical Resistivity, ohms-cm | Thermal Conductivity | Color | Each | |
Silicone Thickener | |||||||||||
| Not Rated | Synthetic | 100% Silver | 0.2 | Syringe | -70° to 485° | 490° | 0.010 | 40 Btu/hr. × in./sq. ft./°F | Silver | 0000000 | 000000 |
Grease without Thickener | |||||||||||
| 2 | Synthetic | 85% Silver | 0.5 | Jar | -40° to 300° | Not Rated | 0.005 | 60 Btu/hr. × in./sq. ft./°F | Silver | 0000000 | 000000 |
| 2 | Synthetic | 85% Silver | 1 | Jar | -40° to 300° | Not Rated | 0.005 | 60 Btu/hr. × in./sq. ft./°F | Silver | 0000000 | 000000 |
Grease for Electrical Contacts
Lubricate, clean, deoxidize, and prevent corrosion on electrical contacts to improve their performance.
NLGI viscosity grade is a rating of a grease's consistency. NLGI 2 is about the consistency of peanut butter.
Grease with quartz has quartz particles to assist oxide breakup. Grease with copper has copper particles to assist oxidize breakup and resist abrasion on surfaces that require conductivity. Grease with aluminum is for use on aluminum parts that won’t come in contact with each other. Grease with graphite has graphite particles to absorb and dissipate heat. Grease with only deoxidizer provides the best lubrication and is for use on clean surfaces.
Grease lubricates most efficiently within the listed temperature range. Melting temperature is the point at which grease will fail and run out of equipment, leaving it to run dry.
Container | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| NLGI Viscosity Grade | Base Oil | Additive | Size, oz. | Type | Temp. Range, °F | Melting Temp., °F | Dielectric Strength, V/mil | Color | Each | |
Lithium Thickener | ||||||||||
| 2 | Synthetic | Deoxidizer | 0.1 | One-Time-Use Pack | -30° to 200° | 285° | 115 | Amber | 0000000 | 00000 |
| 2 | Synthetic | Deoxidizer | 8 | Tube | -30° to 200° | 285° | 115 | Amber | 000000 | 00000 |
| 2 | Synthetic | Deoxidizer | 10 | Aerosol Can | -30° to 200° | 285° | 115 | Amber | 0000000 | 00000 |
| 2 | Synthetic | Deoxidizer, Aluminum | 8 | Tube | -30° to 200° | 285° | 115 | Amber | 0000000 | 00000 |
| 2 | Synthetic | Deoxidizer, Copper | 8 | Tube | -30° to 200° | 285° | 115 | Amber | 0000000 | 00000 |
| 2 | Synthetic | Deoxidizer, Graphite | 8 | Tube | -30° to 200° | 285° | 115 | Amber | 0000000 | 00000 |
| 2 | Synthetic | Deoxidizer, Quartz | 8 | Tube | -30° to 200° | 285° | 115 | Amber | 0000000 | 00000 |
Container | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| NLGI Viscosity Grade | Base Oil | Additive | Size, oz. | Type | Temp. Range, °F | Melting Temp., °F | Dielectric Strength, V/mil | Color | Pkg. Qty. | Pkg. | |
Lithium Thickener | |||||||||||
| 2 | Synthetic | Deoxidizer | 0.1 | One-Time-Use Pack | -30° to 200° | 285° | 115 | Amber | 12 | 0000000 | 000000 |
| 2 | Synthetic | Deoxidizer | 8 | Tube | -30° to 200° | 285° | 115 | Amber | 12 | 000000 | 000000 |
| 2 | Synthetic | Deoxidizer | 10 | Aerosol Can | -30° to 200° | 285° | 115 | Amber | 12 | 0000000 | 000000 |
| 2 | Synthetic | Deoxidizer, Aluminum | 8 | Tube | -30° to 200° | 285° | 115 | Amber | 12 | 0000000 | 000000 |
| 2 | Synthetic | Deoxidizer, Copper | 8 | Tube | -30° to 200° | 285° | 115 | Amber | 12 | 0000000 | 000000 |
| 2 | Synthetic | Deoxidizer, Graphite | 8 | Tube | -30° to 200° | 285° | 115 | Amber | 12 | 0000000 | 000000 |
| 2 | Synthetic | Deoxidizer, Quartz | 8 | Tube | -30° to 200° | 285° | 115 | Amber | 12 | 0000000 | 000000 |
Electrical-Insulating Grease
Also known as dielectric grease, use insulating grease to lubricate and protect electrical systems. It resists water and corrosion. This grease can be used on most rubber and plastic.
NLGI viscosity grade is a rating of a grease's consistency. NLGI 1 is about the consistency of tomato paste. NLGI 2 is about the consistency of peanut butter. NLGI 3 is about the consistency of vegetable shortening.
Dielectric strength measures the maximum voltage a grease can withstand without losing its insulating properties. The higher the dielectric strength, the better its quality as an insulator.
Grease lubricates most efficiently below the maximum temperature. Nonmelting grease can be used at temperatures above the maximum temperature briefly, but then will break down more quickly.
Molykote 5 Compound is for use on insulators, bushings, and high-current switches.
Container | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| NLGI Viscosity Grade | Base Oil | Size | Type | Temp. Range, °F | Melting Temp. | Dielectric Strength, V/mil | Color | Each | |
DuPont Molykote 5 Compound—Silica Thickener | |||||||||
| 3 | Synthetic | 5.3 oz. | Tube | -65° to 450° | Not Rated | 545 | Gray | 0000000 | 000000 |
Loctite® LB 8423 Dielectric Grease—Silica Thickener | |||||||||
| 3 | Synthetic | 0.3 oz. | Tube | -65° to 400° | Not Rated | 500 | Clear | 0000000 | 0000 |
Silica Thickener | |||||||||
| 1 | Synthetic | 5.3 oz. | Tube | -50° to 400° | Not Rated | 385 | White | 0000000 | 00000 |
| 1 | Synthetic | 14 oz. | Grease Gun Cartridge | -50° to 400° | Not Rated | 385 | White | 0000000 | 00000 |
| 1 | Synthetic | 16 oz. | Jar | -50° to 400° | Not Rated | 385 | White | 0000000 | 00000 |
| 2 | Synthetic | 0.2 oz. | One-Time-Use Pack | -40° to 400° | Not Rated | 830 | White | 0000000 | 000 |
| 2 | Synthetic | 5.3 oz. | Tube | -40° to 400° | Nonmelting | 830 | White | 0000000 | 00000 |
| 2 | Synthetic | 14 oz. | Grease Gun Cartridge | -40° to 400° | Nonmelting | 830 | White | 0000000 | 00000 |
Container | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| NLGI Viscosity Grade | Base Oil | Size | Type | Temp. Range, °F | Melting Temp. | Dielectric Strength, V/mil | Color | Pkg. Qty. | Pkg. | |
DuPont Molykote 5 Compound—Silica Thickener | ||||||||||
| 3 | Synthetic | 5.3 oz. | Tube | -65° to 450° | Not Rated | 545 | Gray | 12 | 00000000 | 0000000 |
Silica Thickener | ||||||||||
| 1 | Synthetic | 5.3 oz. | Tube | -50° to 400° | Not Rated | 385 | White | 12 | 00000000 | 000000 |
| 1 | Synthetic | 16 oz. | Jar | -50° to 400° | Not Rated | 385 | White | 16 | 00000000 | 000000 |
| 2 | Synthetic | 5.3 oz. | Tube | -40° to 400° | Nonmelting | 830 | White | 12 | 00000000 | 000000 |
Food Industry Electrical-Insulating Grease
Use this grease in areas where there is the possibility of contact with food. Also known as dielectric grease, it lubricates and protects electrical systems. It resists water and corrosion. This grease can be used on most rubber and plastic.
NLGI viscosity grade is a rating of a grease's consistency. NLGI 1 is about the consistency of tomato paste. NLGI 2 is about the consistency of peanut butter. NLGI 3 is about the consistency of vegetable shortening.
Dielectric strength measures the maximum voltage a grease can withstand without losing its insulating properties. The higher the dielectric strength, the better its quality as an insulator.
Grease that is NSF Registered H1 and grease that meets FDA Compliant 21 CFR 178.3570 are rated for incidental contact with food. Grease that meets NSF/ANSI 51 and FDA Compliant 21 CFR 175.300 are rated for direct contact with food. Grease that meets NSF/ANSI 61 is certified for use with components that come into contact with drinking water.
Grease lubricates most efficiently below the maximum temperature. Nonmelting grease can be used at temperatures above the maximum temperature briefly, but then will break down more quickly.
DuPont Molykote 4 Electrical Insulating Compound also acts as a moisture barrier.
Container | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| NLGI Viscosity Grade | Base Oil | Additive | Size | Type | Temp. Range, °F | Dielectric Strength, V/mil | Color | Specifications Met | Each | |
DuPont Molykote 4 Electrical Insulating Compound—Silica Thickener | ||||||||||
| 2-3 | Synthetic | __ | 5.3 oz. | Tube | -40° to 400° | 450 | White | SAE AS8660, FDA Compliant 21 CFR 175.300, NSF/ANSI 61, NSF/ANSI 51 | 0000000 | 000000 |
| 2-3 | Synthetic | __ | 8 lbs. | Pail | -40° to 400° | 450 | White | SAE AS8660, FDA Compliant 21 CFR 175.300, NSF/ANSI 61, NSF/ANSI 51 | 0000000 | 000000 |
Silica Thickener | ||||||||||
| 1 | Synthetic | Silicone | 1 oz. | Tube | -40° to 400° | 350 | Clear | NSF Registered H1 | 0000000 | 0000 |
| 1 | Synthetic | Silicone | 4 oz. | Tube | -40° to 400° | 350 | Clear | NSF Registered H1 | 0000000 | 00000 |
Nonmelting Grease without Thickener | ||||||||||
| 2 | Synthetic | Silicone | 3 oz. | Tube | -40° to 500° | 400 | White | FDA Compliant 21 CFR 178.3570, NSF Registered H1 | 0000000 | 00000 |
| 2 | Synthetic | Silicone | 14.1 oz. | Grease Gun Cartridge | -40° to 500° | 400 | White | FDA Compliant 21 CFR 178.3570, NSF Registered H1 | 0000000 | 00000 |
Container | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| NLGI Viscosity Grade | Base Oil | Additive | Size | Type | Temp. Range, °F | Dielectric Strength, V/mil | Color | Specifications Met | Pkg. Qty. | Pkg. | |
DuPont Molykote 4 Electrical Insulating Compound—Silica Thickener | |||||||||||
| 2-3 | Synthetic | __ | 5.3 oz. | Tube | -40° to 400° | 450 | White | SAE AS8660, FDA Compliant 21 CFR 175.300, NSF/ANSI 61, NSF/ANSI 51 | 12 | 00000000 | 0000000 |
Silica Thickener | |||||||||||
| 1 | Synthetic | Silicone | 4 oz. | Tube | -40° to 400° | 350 | Clear | NSF Registered H1 | 12 | 00000000 | 000000 |
Nonmelting Grease without Thickener | |||||||||||
| 2 | Synthetic | Silicone | 3 oz. | Tube | -40° to 500° | 400 | White | FDA Compliant 21 CFR 178.3570, NSF Registered H1 | 12 | 0000000 | 000000 |
| 2 | Synthetic | Silicone | 14.1 oz. | Grease Gun Cartridge | -40° to 500° | 400 | White | FDA Compliant 21 CFR 178.3570, NSF Registered H1 | 12 | 0000000 | 000000 |
Penetrating Lubricants for Electrical Applications
Protect electrical components—these lubricants insulate and block moisture, preventing electrical malfunctions. They cut through dirt, grease, and rust to clean connections and relays, leaving behind a thin film for long-lasting protection.
Dielectric strength measures the maximum voltage a lubricant can withstand without losing its insulating properties. The higher the dielectric strength, the better its quality as an insulator.
Container | |||||
|---|---|---|---|---|---|
| Size, oz. | Type | Dielectric Strength, V/mil | Temp. Range, °F | Each | |
CRC 3-36 Technical Grade | |||||
| 11 | Aerosol Can | 51,300 | Not Rated to 250° | 0000000 | 00000 |
Container | ||||||
|---|---|---|---|---|---|---|
| Size, oz. | Type | Dielectric Strength, V/mil | Temp. Range, °F | Pkg. Qty. | Pkg. | |
CRC 3-36 Technical Grade | ||||||
| 11 | Aerosol Can | 51,300 | Not Rated to 250° | 12 | 00000000 | 0000000 |
Non-Bonding Heat Transfer Compounds
Also known as thermal paste, these boron-nitride compounds increase heat transfer between parts while preventing them from sticking. Unlike antiseize compounds, they don't conduct electricity, so you won't risk shorting out sensitive electronics. They're often used on thermocouple probes to improve accuracy. You can also use them in 3D printer heating blocks and other high-temperature areas to keep parts from fusing together.
Container | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Size, oz. | Type | Chemical | Max. Temp., °F | Thermal Conductivity | Color | Includes | For Use On | Compatible With | Each | |
| 0.2 | Syringe | Boron Nitride | 1830° | 31.4 W/m-K @ 212° F | White | Three Applicator Brushes | 3D Printer Extruder Heating Elements, Electrical Components | Aluminum, Brass, Copper, Iron, Nickel, Stainless Steel, Steel, Titanium | 0000000 | 000000 |