Continuity Testers | McMaster-Carr

Filter by

Measures

Alert Type

Sensor End

Sheathed Alligator Clip

Test Leads with Needle Tips

Test Leads with Replaceable Alligator Clips

Test Leads with Sheathed Alligator Clips

Test End Component

Retractable Insulation Piercing Grabber

Threaded Needle Tip

Threaded Needle Tip with Alligator Clip

AC Voltage

30V AC to 122,000V AC

2.4 kV AC to 500 kV AC

Display Type

Battery Size

DC Voltage

Electrical Safety Rating

Batteries Required

U.S.–Mexico–Canada Agreement (USMCA) Qualifying

REACH

RoHS

Compliant with Exemptions

Not Compliant

Measurement Unit

Millivolts

Volts

Export Control Classification Number (ECCN)

3A992

5B991

EAR99

DFARS Specialty Metals

Exempt

Batteries Replaceable

Batteries Included

Lead Length

Number of Leads

Electrical Connection

Standard Banana

Wireless

For Fluke Model Number

Manufacturer Model Number

Voltage Increments

For Cable Type

Certification

78 Products

Line Break Detectors


Long-Reach-Tip Sensor End, Sheathed-Alligator-Clip Sensor End	Probe-Tip Sensor End, Sheathed-Alligator-Clip Sensor End	Test-Lead Sensor End with Replaceable Alligator Clips

Check continuity in circuits. If there are no line breaks, light or sound alerts signal continuity.

Line Break Detectors										Replacement Test Leads
			Test Leads		Batteries
Sensor End	Measures	Alert Type	No. of	Lg.	Included	Size	No. Required		Each		Pair
Long-Reach Tip, Sheathed Alligator Clip	Continuity, Ground Faults	Light	1	72"	Yes	CR2	1	6984K72	000000	———	0
Probe Tip, Sheathed Alligator Clip	Continuity	Light	1	36"	Yes	AAA	2	7256K11	0000	———	0
Test Leads with Replaceable Alligator Clips	Continuity	Sound	2	48"	No	9V	1	7411K38	000000	7411K39	000000

Batteries

	Pkg. Qty.		Pkg.
AAA Batteries	4	71455K62	00000
9V Battery	1	71455K56	0000
CR2 Battery	1	7821K72	0000

Voltage Detectors

Confirm that voltage is present in receptacles, cables, and other electrical components. The detectors have light or sound alerts to indicate voltage.

Voltage Detectors


Long-Reach-Tip Sensor End 6V DC to 50V DC	Long-Reach-Tip Sensor End 12V AC to 250V AC	Test-Lead Sensor End with Sheathed Alligator Clips

Test-Lead Sensor End with Needle Tips	Noncontact Sensor End 12V AC to 1,000V AC	Noncontact Sensor End 50V AC to 1,000V AC

Long-Reach-Tip Sensor End, Test-Lead Sensor End with Sheathed Alligator Clips, and Test-Lead Sensor End with Needle Tips—Long-reach tips, tests leads with sheathed alligator clips, and test leads with needle tips must touch the electrical component you're testing to sense voltage.

Noncontact Sensor End—Noncontact detectors can sense voltage when brought near the electrical component.

							Batteries
Sensor End	Electrical Safety Rating	DC Voltage, V DC	AC Voltage, V AC	Measures	Alert Type	Certification	Req.	Included		Each
Long-Reach Tip	—	6 to 50	—	DC Voltage	Light, Sound	UL Listed, C-UL Listed	No	—	69595K94	000000
Long-Reach Tip	CAT III, 250V	—	12 to 250	AC Voltage, Continuity	Light	ETL Listed, C-ETL Listed	Yes	Yes	6982K81	00000
Test Leads with Sheathed Alligator Clips	CAT I, 50V	5 to 50	5 to 50	AC Voltage, DC Voltage	Light	ETL Listed, C-ETL Listed	No	—	6982K51	0000
Test Leads with Needle Tips	CAT III, 600V	160 to 600	120 to 480	AC Voltage, DC Voltage	Light	CSA Certified	No	—	6982K71	00000
Noncontact	CAT IV, 600V	—	12 to 1,000	AC Voltage	Light, Sound	ETL Listed, C-ETL Listed	Yes	Yes	69595K91	00000
Noncontact	CAT IV, 1,000V	—	50 to 1,000	AC Voltage	Light, Sound	UL Listed, C-UL Listed	Yes	Yes	69595K93	00000

Fluke Voltage Detectors

Long-Reach-Tip Sensor End

Long-Reach-Tip Sensor End—Long-reach tips, tests leads with sheathed alligator clips, and test leads with needle tips must touch the electrical component you're testing to sense voltage.

							Batteries
Sensor End	Mfr. Model No.	Electrical Safety Rating	AC Voltage, V AC	Measures	Alert Type	Certification	Req.	Included		Each
Long-Reach Tip	1AC-II	CAT IV, 1,000V	90 to 1,000	AC Voltage	Light, Sound	CSA Certified, CSA-US Certified	Yes	Yes	7053K51	000000
Long-Reach Tip	1LAC-II	CAT IV, 1,000V	20 to 90	AC Voltage	Light, Sound	CSA Certified, CSA-US Certified	Yes	Yes	7053K52	00000

Data Cable Testing Adapters

Attach the included cord to an RJ45 wall outlet to isolate the signals of a data line, and use alligator clips to connect your testing device.

No. of Test Connections	Includes		Each
8	Cord with RJ45 Plugs	9240T2	000000

Fluke Vibrating Voltage Meters

Detect voltage with three types of alerts for extra safety—light, sound, and vibration. There are LEDs that light up to show the approximate voltage level, and a digital LCD shows precise voltage measurements. Fluke meters are known for quality and durability.

											Batteries
Mfr. Model No.	Electrical Safety Rating	Measures	Voltage Increments	Max. Resistance, kohm	Alert Type	Display Type	Display Features	Includes	Lead Lg.	Certification	Req.	Included		Each
T+Pro	CAT IV, 600V	AC Voltage, Continuity, DC Voltage, Resistance	12V, 24V, 48V, 120V, 208V, 240V, 277V, 480V, 600V	10	Light, Sound, Vibrating Alarm	Digital, Light Indicator	Backlight	Test Leads	34"	UL Listed, C-UL Listed	Yes	Yes	7053K16	0000000

Tone-Generating Line Testers


RJ11 Plug	RJ45 Plug

Generate an audible signal when testing for short circuits, line continuity, or when locating a cable. Use an amplifier (sold separately) to hear the signal. These tone generators have a light signal to verify polarity.

Line Testers									Pouches
Measures	Alert Type	Features	Includes	Batteries Included	No. of Batteries Req.	Battery Size		Each		Each
Cable Location, Continuity, Polarity	Light, Sound	RJ11 Plug	Test Leads with Alligator Clips	No	1	9V	57175T1	000000	57175T15	000000
Cable Location, Continuity, Polarity	Light, Sound	RJ45 Plug	Test Leads with Alligator Clips	No	1	9V	57175T9	000000	57175T71	00000

Line Tester Adapters

Connect to an RJ11 wall outlet to isolate telephone line signals, letting you pinpoint faults on a specific line without interference from other connected equipment. An included cord and alligator clips provide a quick connection between the wall outlet and your testing device.

No. of Test Connections	Includes		Each
6	Cord with RJ11 Plugs	9240T4	000000

Line Testers

Diagnose problems with analog and digital telephone lines.

		Display
Measures	Alert Type	Type	Features	Includes	Batteries Included	No. of Batteries Req.	Battery Size		Each
DC Current, DC Voltage, Dial Tone	Light	Digital	Call Waiting, Caller ID, Number Dialed	Headset, Test Leads with Alligator Clips and RJ11 Plug	No	2	AA	57595T35	0000000

Vibrating Voltage Meters

In addition to vibrating to confirm the presence of voltage, these meters have LEDs that light up to show an approximate voltage level.

		AC Voltage, V AC		DC Voltage, V DC							Batteries
Electrical Safety Rating	Measures	Min.	Max.	Min.	Max.	Alert Type	Display Type	Includes	Lead Lg.	Certification	Req.	Included		Each
CAT III, 600V	AC Voltage, DC Voltage	100	600	100	600	Light, Vibrating Alarm	Light Indicator	Test Leads	28"	UL Listed, C-UL Listed	No	—	7258K23	000000
CAT III, 600V	AC Voltage, Continuity, DC Voltage	5	600	5	600	Light, Vibrating Alarm	Light Indicator	Test Leads	28"	UL Listed, C-UL Listed	Yes	Yes	7258K24	000000

Accessories and Replacements for Voltage Meters


Optional Fabric Case	7258K34	Each	000000
Replacement Sheathed Probe Tip Test Leads (28" Lg.)	7258K35	Pair	00000

Fluke Wireless Remote-Reading Voltage Meters

Measure voltage from a distance with these wireless connection-enabled meters that transmit readings to a separate display. Fluke is known for quality and durability.

The meters work with the Fluke 3000 FC multimeter, a computer with a Fluke pc3000 FC connector plugged in (not included), or a mobile device that has the Fluke Connect app.

True RMS AC Calculation—The true RMS meter takes accurate AC measurements regardless of the load type or sine wave shape. This is important for testing electronic devices that draw current in short pulses that can distort the shape of the wave, such as computers and adjustable-speed drives.

Display Count—Display count is an industry designation and not an actual value. These 1,000-count meters show numbers up to 999.

												Batteries
Mfr. Model No.	AC Calculation	Electrical Safety Rating	Measures	Max. AC Voltage, V AC	Max. DC Voltage, V DC	Display Type	Display Features	Data Log Cap.	Display Count	Includes	Certification	Req.	Included		Each
v3000 FC	True RMS	CAT IV, 600V	AC Voltage	1,000	—	Digital	Backlight	65,000	1,000	Alligator Clips, Magnetic Hanger, Test Leads	CSA Certified, CSA-US Certified	Yes	Yes	7093K421	0000000
v3001 FC	—	CAT IV, 600V	DC Voltage	—	1,000	Digital	Backlight	65,000	1,000	Alligator Clips, Magnetic Hanger, Test Leads	CSA Certified, CSA-US Certified	Yes	Yes	7093K621	000000

Noise-Filtering Telephone Line Testing Amplifiers

Use this amplifier with a tone generator or tester to identify a cable without making direct contact with the wire. The tone will get louder the closer you get to the correct cable.

Amplifiers					Pouches
Measures	Alert Type	Features		Each		Each
Cable Location	Sound	Noise Filter, Socket for Lineman's Butt Set	57175T8	0000000	57175T57	000000

Telephone Line Testing Amplifiers

Use this amplifier with a tone generator or tester to identify a cable without making direct contact with the wire. The tone will get louder the closer you get to the correct cable.

Amplifiers					Pouches
Measures	Alert Type	Features		Each		Each
Cable Location	Sound	Socket for Lineman's Butt Set	57175T5	000000	57175T57	000000

Fluke Test Lead Kits

These kits include a set of red and black Fluke test leads with a variety of interchangeable tips.

The connection end on the test leads is a 4 mm banana plug, which is the standard for connecting to a multimeter.

Mfr. Model No.	For Fluke Model No.	AC Voltage, V AC	DC Voltage, V DC	Current, amp	Electrical Safety Rating	Includes	Cord Lg.	Color		Each
TL220	27 II, 28 II, 83V, 87V, 114, 115, 116, 117, 123, 175, 177, 179, 233, 287, 289, 373, 374, 787, 789	1,000	1,000	10	CAT II, 1,000V	Two Cords with Sheathed Straight Banana Plug and Sheathed Right-Angle Banana Plug Two Needle Tips Two Insulated Plunger Style Alligator Clips	59"	Black, Red	7093K27	0000000
TLK-225	27 II, 28 II, 83V, 87V, 175, 177, 179, 287, 289, 787, 789, 1577, 1587	1,000	1,000	1	CAT IV, 600V	Two Cords with Sheathed Straight Banana Plug and Sheathed Right-Angle Banana Plug Two Needle Tips Two Insulated Alligator Clips Two Retractable Grabbers Two Retractable Precision Grabbers Two Retractable Precision Hooks Pouch	59"	Black, Red	7093K44	000000
TLK289	287, 289, 376, 381	1,000	1,000	3	CAT II, 1,000V	Two Cords with Sheathed Straight Banana Plug and Sheathed Right-Angle Banana Plug Two Needle Tips Two Insulated Alligator Clips Two Retractable Grabbers Two Retractable Precision Hooks Thermocouple Magnetic Hanger Pouch	59"	Black, Red	7093K49	000000

Build-Your-Own Test Leads


Style A	Style B	Style C

Style D	Style E	Style F

Style G	Style H	Style J

Style K	Style L

Choose your own combination of test lead tips and cords.

The connection end on the cords is a 4 mm banana plug, which is the standard for connecting to a multimeter.

Cords


Style A	Style B	Style C

Connection End	Connection End Shape	AC Voltage, V AC	DC Voltage	Current, amp	Electrical Safety Rating	No. of Cords	Cord Lg.	AWG	Color		Pair



A	Sheathed Standard Banana Plug x Sheathed Standard Banana Plug	90° Angle x 90° Angle	1,000	1,000 mV DC	10	CAT III, 1,000V	2	47"	18	Black, Red	6571K83	000000


B	Sheathed Standard Banana Plug x Sheathed Standard Banana Plug	Straight x 90° Angle	1,000	1,000V DC	10	CAT III, 1,000V	2	47"	18	Black, Red	6571K16	00000
C	Sheathed Standard Banana Plug x Sheathed Standard Banana Plug	Straight x Straight	1,000	1,000V DC	10	CAT III, 1,000V	2	47"	18	Black, Red	6571K17	00000

Tips


Style D	Style E	Style F	Style G

Style H	Style J	Style K	Style L

Test End	AC Voltage, V AC	DC Voltage, V DC	Current, amp	Electrical Safety Rating	Test End Material	Color		Pair



D	Alligator Clip	1,000	1,000	20	CAT II, 1,000V	Nickel-Plated Steel	Black, Red	6571K21	000000


E	Alligator Clip	1,000	1,000	20	CAT III, 1,000V	Nickel-Plated Brass	Black, Red	6571K32	00000
F	Pointed Banana Plug	1,000	1,000	10	CAT III, 1,000V	Nickel-Plated Brass	Black, Red	6571K33	00000
G	Retractable Grabber	1,000	1,000	10	CAT III, 1,000V	Nickel-Plated Brass	Black, Red	6571K65	00000
H	Precision Retractable Grabber	1,000	1,000	10	CAT II, 1,000V	Nickel-Plated Stainless Steel	Black, Red	6571K69	00000
J	Retractable Hook	1,000	1,000	10	CAT III, 1,000V	Nickel-Plated Copper	Black, Red	6571K66	00000
K	Precision Retractable Hook	1,000	1,000	20	CAT III, 1,000V	Nickel-Plated Brass	Black, Red	6571K24	00000
L	Retractable Insulation Piercing Grabber	1,000	1,000	5	CAT III, 1,000V	Stainless Steel	Black, Red	6571K68	000000

Fluke Current-Sensing Test Leads

Current Clamp

Measure current without interrupting the circuit by connecting these test leads to a multimeter or current meter.

The connection end is a 4 mm banana plug, which is the standard for connecting to a multimeter or current meter.

These test leads step down the sensed current to a level that works with a multimeter or current meter—the signal reduction ratio is the factor by which they reduce current.

	Test End	For Max. Cord Dia.	Connection End	AC Current, amp	Current Accuracy	Current Output Signal per amp Supplied, mA	For Current Range	AC Voltage, V AC	Electrical Safety Rating	Freq. Range	Jaw Opening	For Fluke Model No.	Cord Lg.	Batteries Req.		Each
Measures AC Current



	i400	Current Clamp	1.25"	Sheathed Standard Banana Plug	1 to 400	2%	1.000	1 amp to 400 amp	1,000	CAT IV, 600V	5 Hz to 20 kHz	1.25"	27 II, 28 II, 77IV, 83V, 87V, 179, 287, 289, 787, 789, 1577, 1587	59"	No	7575K66	0000000

High-Voltage Detectors

Safely check for the presence of voltage in high-voltage equipment and lines. This noncontact detector checks for voltage by sensing electrostatic fields when brought near the electrical component. Light and sound alerts indicate voltage.

					Batteries
Sensor End	AC Voltage, V AC	Measures	Alert Type	Includes	Req.	Included		Each
Noncontact	30 to 122,000	AC Voltage	Light, Sound	Carrying Case	Yes	Yes	7440K29	0000000

Sticks

Hot Stick (48" Long)—For testing 1,500-122,000V AC, a hot stick is required (not included). It attaches to the high-voltage detector to extend your reach and detect voltage from a distance.

		Each
Hot Stick (48" Long)	7440K32	0000000

Current-Sensing Test Leads


Current Loop	Current Clamp

Measure current without interrupting the circuit by connecting these test leads to a multimeter or current meter.

The connection end is a 4 mm banana plug, which is the standard for connecting to a multimeter or current meter.

These test leads step down the sensed current to a level that works with a multimeter or current meter—the signal reduction ratio is the factor by which they reduce current.

	For Max. Cord Dia.	Connection End	AC Current, amp	DC Current, amp	Current Accuracy	Voltage Output Signal Per Amp Supplied	For Current Range	AC Voltage, V AC	Electrical Safety Rating	Freq. Range	Jaw Opening	Loop Opening	Cord Lg.	Batteries Req.	Batteries Included		Each
Measures AC Current



	Flexible Current Loop	—	Sheathed Standard Banana Plug	5 to 3,000	—	1%	10.000 mV AC, 1.000 mV AC, 1.000 mV DC	5 amp to 300 amp 50 amp to 3,000 amp	1,000	CAT IV, 600V	5 kHz to 40 kHz	—	7.6"	78"	Yes	Yes	7575K81	0000000


	Measures AC Current and DC Current



			Current Clamp	1.22"	Sheathed Standard Banana Plug	0 to 1,000	0 to 1,000	1%	1.000 mV AC, 1.000 mV DC	0 amp to 200 amp 0 amp to 1,000 amp	300	CAT III, 300V	0 Hz to 10 kHz	1.25"	—	59"	Yes	Yes	65775K79	000000

Test Lead Kits

Perform electrical tests with a set of red and black test leads and interchangeable tips.

The connection end on the test leads is a 4 mm banana plug, which is the standard for connecting to a multimeter.

Includes	Cord Lg.	Color	AWG		Each
Two Cords with Sheathed Straight and Sheathed Right-Angle Banana Plugs, CAT III, 1,000V, 10A Two Insulated Alligator Clips, CAT II, 1,000V, 10A Two Pointed Banana Plugs, CAT III, 1,000V, 10A Two Precision Retractable Grabbers, CAT II, 1,000V, 10A Pouch	47"	Black, Red	18	6571K95	0000000
Two Cords with Sheathed Straight and Sheathed Right-Angle Banana Plugs, CAT III, 1,000V, 10A Two Alligator Clips, CAT III, 1,000V, 10A Two Pointed Banana Plugs, CAT III, 1,000V, 6A Two Retractable Precision Grabbers, CAT III, 1,000V, 4A Two Retractable Grabbers, CAT III, 1,000V, 10A Two Retractable Hooks, CAT III, 1,000V, 10A Pouch	63"	Black, Red	18	6571K94	000000

Test Leads


Sheathed 90° Standard Banana Plug	Sheathed Straight Standard Banana Plug

Replace a test lead or complete a set with a red or black lead.

The connection end is a 4 mm banana plug, which is the standard for connecting to a multimeter.

Connection End	Connection End Shape	AC Voltage, V AC	DC Voltage, V DC	Current, amp	Electrical Safety Rating	No. of Cords	Cord Lg.	AWG	Test End Material	Cord Insulation Material	Choose a Color		Each



Retractable Hook	Sheathed Standard Banana Plug	90° Angle	300	300	5	CAT II, 300V	1	48"	18	Gold-Plated Copper	Silicone Rubber	Black, Red	6927K37	000000


Retractable Hook	Sheathed Standard Banana Plug	Straight	300	300	5	CAT II, 300V	1	48"	18	Gold-Plated Copper	Silicone Rubber	Black, Red	6927K38	00000

Test Leads with Reel

Extend the distance between your multimeter and the equipment you’re testing.

One end of the test leads is a 4 mm banana plug, which is the standard for connecting to a multimeter. The other end is a 4 mm banana jack that attaches to test leads that have a 4 mm banana plug.

	Connection End	Connection End Shape	AC Voltage, V AC	DC Voltage, V DC	Current, amp	Electrical Safety Rating	AWG	Cord Insulation Material		Each
40 ft. Long



	Black	Sheathed Standard Banana Plug x Sheathed Standard Banana Jack	90° Angle x Straight	1,000	1,000	20	CAT III, 1,000V	18	Silicone Rubber	5920T111	000000


	Red	Sheathed Standard Banana Plug x Sheathed Standard Banana Jack	90° Angle x Straight	1,000	1,000	20	CAT III, 1,000V	18	Silicone Rubber	5920T121	00000

Voltage Detectors for Hard Hats


Shown with Hard Hat (Sold Separately)

Clip these detectors to your hard hat to identify voltage and current from 360°. Without making physical contact, they flash light in the direction of the electrical threat and beep louder as you get closer to it. These lightweight detectors are comfortable to wear all day. They’re often used to identify live conductors, energized lines underground, and residual voltage.

Set the sensitivity level to determine when the detector alerts you. While the battery life varies depending on the number of alerts, a full charge can last up to five days. Recharge the battery with the included USB charging cable or a standard USB 2.0 Micro-B charger.

120V AC to 500 kV AC—120V AC-500kV AC detectors sense voltages as low as those in a power socket and as high as those in high-power transmission lines. Since they detect a wide range of voltages, they’re a helpful tool for rescue workers, electricians, and telecom workers. They can also connect to an app to notify emergency response services when there is a fall, injury, or no movement detected. The app is optional, and it requires a paid subscription. This safety feature makes these detectors a great option for those working alone.

2.4 kV AC to 500 kV AC—2.4kV AC to 500kV AC detectors identify a wide range of voltages found in high-power transmission lines, so they’re often used by linemen. However, they won’t detect the low voltage ranges found in telecom lines or small machinery.

Voltage Detectors														Replacement Hard Hat Clips
				Batteries
AC Voltage	No. of Sensitivity Levels	AC Current, amp	Measures	Life, hr.	Included	Includes	Alert Type	Flammability Rating	Wt., oz.	Enclosure Rating	Features		Each		Each
120V AC to 500 kV AC	11	1 to 200	AC Current, AC Voltage	40	Yes	Carrying Case, USB Charging Cable	Light, Sound	UL 94 V-0	0.95	IP67	App Connectivity	8018N12	0000000	8018N13	00000
2.4 kV AC to 500 kV AC	7	1 to 200	AC Current, AC Voltage	80	Yes	Carrying Case, USB Charging Cable	Light, Sound	UL 94 V-0	0.5	IP67	—	8018N11	000000	———	0

Test Lead Sets


Style A	Style B	Style C

Style D	Style E	Style F

Ready to connect to a multimeter or other electrical test equipment, these red and black test leads come as a pair. The connection end is a standard 4 mm banana plug that fits most multimeters.

Style D—Threaded needle tips allow precise contact on small test points such as circuit board pads. Included alligator clips screw onto the tips for hands-free connections to wires and terminals, giving two testing options with one set.

Style F—Precision tweezer tips grip individual SMD components directly on the board. They're well suited for surface-mount troubleshooting and measuring small, closely spaced parts that standard probes cannot isolate.

Style	Test End	Connection End	AC Voltage, V AC	DC Voltage, V DC	Current, amp	Electrical Safety Rating	No. of Cords	Cord Lg.	Color	Test End Material		Pair
A	Precision Retractable Hook	Sheathed Standard Banana Plug	300	300	5	CAT II, 300V	2	48"	Black, Red	Gold-Plated Copper	6929K11	000000
B	Precision Retractable Hook	Sheathed Standard Banana Plug	300	300	5	CAT II, 300V	2	48"	Black, Red	Gold-Plated Copper	6929K12	00000
C	Threaded Needle Tip	Sheathed Standard Banana Plug	1,000	1,000	20	CAT II, 1,000V	2	48"	Black, Red	Stainless Steel	6929K751	00000
D	Threaded Needle Tip with Alligator Clip	Sheathed Standard Banana Plug	1,000	1,000	20	CAT II, 300V	2	44"	Black, Red	Stainless Steel	6929K55	00000
E	Notched Probe Tip	Sheathed Standard Banana Plug	1,000	1,000	10	CAT II, 1,000V	2	48"	Black, Red	Nickel-Plated Brass	6929K29	00000
F	Precision Tweezer	Sheathed Standard Banana Plug	30	60	3	—	2	48"	Black	Brass	6927K28	00000

Fluke Test Lead Sets


Model Number FTPL-1	Model Number TL175

Model Number TL222	Model Number TL224

Model Number TL26A	Model Number TL27

Model Number TL28A	Model Number TL40

Model Number TL71	Model Number TL75

Model Number TL76	Model Number TL910

Connect to Fluke multimeters with a set of red and black test leads.

The connection end is a 4 mm banana plug, which is the standard for connecting to a multimeter.

Mfr. Model No.	For Fluke Model No.	Test End	Connection End	AC Voltage, V AC	DC Voltage, V DC	Current, amp	Electrical Safety Rating	Certification	No. of Cords	Cord Lg.	Color	Test End Material		Pair
FTPL-1	289	Notched Threaded Probe Tip	Sheathed Standard Banana Plug	1,000	1,000	10	CAT IV, 600V	CSA Certified, CSA-US Certified	2	48"	Black, Red	Nickel-Plated Brass	7093K125	0000000
TL175	77IV, 113, 114, 115, 116, 117, 175, 177, 179, 233, 287, 289	Notched Threaded Probe Tip	Sheathed Standard Banana Plug	1,000	1,000	10	CAT IV, 600V	CSA Certified, CSA-US Certified	2	48"	Black, Red	Nickel-Plated Brass	7093K123	00000
TL222	83V, 87V, 787	Sheathed Banana Plug	Sheathed Standard Banana Plug	1,000	1,000	10	CAT III, 1,000V; CAT IV, 600V	CSA Certified, CSA-US Certified	2	60"	Black, Red	Copper	7093K127	00000
TL224	87V, 107, 179, 233, 287, 3000	Sheathed Banana Plug	Sheathed Standard Banana Plug	1,000	1,000	10	CAT III, 1,000V; CAT IV, 600V	CSA Certified, CSA-US Certified	2	60"	Black, Red	Copper	7093K128	00000
TL26A	83V, 87V, 88V/A, 107, 179, 287, 289	Serrated Alligator Clip	Sheathed Standard Banana Plug	30	30	8	—	CSA Certified, CSA-US Certified	2	60"	Black, Red	Nickel-Plated Copper	7093K129	00000
TL27	107, 175, 177, 179, 787	Sheathed Banana Plug	Sheathed Standard Banana Plug	1,000	1,000	10	CAT III, 1,000V	CSA Certified, CSA-US Certified	2	60"	Black, Red	Copper	7093K131	00000
TL28A	88V/A, 107, 175, 177, 179, 287, 289	Serrated Alligator Clip	Sheathed Standard Banana Plug	30	30	10	CAT I, 30V	CSA Certified, CSA-US Certified	2	60"	Black, Red	Copper	7093K132	00000
TL40	83V, 87V, 88V/A, 287, 289, 787	Retractable Probe Tip	Sheathed Standard Banana Plug	600	600	3	CAT II, 600V	CSA Certified, CSA-US Certified	2	48"	Black, Red	Stainless Steel	7093K133	00000
TL71	27 II, 28 II, 83V, 87V, 88V, 114, 115, 116, 117, 175, 177, 179, 233, 787, 789	Notched Probe Tip	Sheathed Standard Banana Plug	1,000	1,000	10	CAT IV, 600V	CSA Certified, CSA-US Certified	2	48"	Black, Red	Nickel-Plated Brass	7093K124	00000
TL75	83V, 87V, 113, 175, 177, 179, 287, 289, 787, 789	Notched Probe Tip	Sheathed Standard Banana Plug	1,000	1,000	10	CAT IV, 600V	CSA Certified, CSA-US Certified	2	48"	Black, Red	Nickel-Plated Brass	75085K98	00000
TL76	87V, 107, 179, 287, 289, 787	Pointed Threaded Probe Tip	Sheathed Standard Banana Plug	1,000	1,000	10	CAT II, 1,000V	CSA Certified, CSA-US Certified	2	48"	Black, Red	Nickel-Plated Brass	7093K134	00000
TL910	83V, 87V, 287, 289, 787	Pointed Probe Tip	Sheathed Standard Banana Plug	1,000	1,000	3	CAT II, 1,000V	CSA Certified, CSA-US Certified	2	40"	Black, Red	Gold-Plated Copper	7093K126	00000