Dip components into acid baths, assemble circuits, and take on other clean room tasks involving hazardous chemicals. Made from a blend of neoprene, latex, and nitrile, these gloves withstand harsh substances such as hydrochloric acid and isopropyl alcohol. They’re flexible enough to let you handle small parts with control. Cleaned and bagged in an environment with low levels of particulates, these gloves won't contaminate your clean room. Plus, they're powder-free and unlined, so they won't shed particles either.

All meet EN 374, a European safety standard for protection from chemicals. Rated Type B, they resist chemical permeation for at least 30 minutes. They also meet EN 388 standards for resistance to abrasions, cuts, and tears.

Often worn when stress-testing semiconductors—where parts go from freezer to furnace—these gloves won't contaminate your clean room. They’re cleaned and bagged in environments with low levels of particulates. These gloves also give you more dexterity when handling items than the basic pinching you get with mitts. Plus, they're ambidextrous, so you can wear them on either hand to extend their life.

The accordion design prevents the sleeve from collapsing and allows more air circulation. For applications that require frequent glove changes, the sleeves stay connected to the glove box so you can quickly change the size or type of glove being used. Use these gloves in glove boxes to safely handle hazardous substances or avoid contaminating sensitive materials. They fit 8" diameter glove box access holes. Attach gloves to sleeves using the included sleeve-to-glove connecting spring clamp and sleeve-to-glove connecting ring clamp. Attach sleeves to a glove box using glove box mounting clamps (sold separately).

Handle everything from frozen samples to freshly soldered circuit boards without contaminating your clean room. These mitts protect your hands between -75° and 390° F. They don’t shed fibers, so your clean room stays clean. Compared to gloves, they’re easier to slip on and off—and they can even be worn over gloves—but aren’t a good choice when you need high dexterity. These mitts meet EN 374 standards for protection against chemicals.

Snip circuit board leads, inspect silicon wafers, and handle other sharp components in clean rooms. Not only are these gloves rated to protect your hands from cuts, they’re also lint-free and unlined to prevent shedding. They’re cleaned and bagged in environments with low levels of particulates, so they won’t contaminate your work area.

All meet ANSI/ISEA 105 standards for various forms of protection, such as cuts, abrasions, and punctures.

Irradiated with gamma rays and individually bagged, these gloves have a sterility assurance level (SAL) of 10-6. This means that the chance you’ll receive a less-than-sterile glove is less than one in a million. They’re also powder free, so they won’t shed particles. These gloves are often used in labs or pharmaceutical plants to maintain sterile conditions.

Protect objects in your clean room from skin oil and other contaminants when dexterity is essential and full hand coverage is not needed. Cleaned and bagged in clean environments, these powder-free, unlined cots won't contaminate your work area.

Cleaned and bagged in environments with low levels of particulates, these gloves won't contaminate your work area.

Seamless one-piece construction provides maximum strength and integrity. Use these gloves in glove boxes to safely handle hazardous substances or avoid contaminating sensitive materials. Attach them to a glove box using glove box mounting clamps (sold separately).