McMaster-Carr logo
    Forward
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Print
    How can we improve?
    Comments
    E-mail address (if you would like a response)
    19 Products

    Milling, Turning, and Sawing Lubricants for Aluminum and Copper

    Image of Product. Front orientation. Machining and Fabricating Lubricants. Milling, Turning, and Sawing Lubricants for Aluminum and Copper, Jug.
    Image of Product. Front orientation. Machining and Fabricating Lubricants. Milling, Turning, and Sawing Lubricants for Aluminum and Copper, Pail.

    Jug

    Pail

    Also known as plumber's lard oil, these light-colored, sulfur-free lubricants won't stain soft metal, such as aluminum or copper. They reduce friction between your cutting tool and workpiece to make cutting cycles faster and easier, improve surface finishes, and extend tool life. Lubricants are chlorine free for use where chlorine waste disposal is a concern. Use at full strength.
    Container
    Each
    Package
    Size,
    gal.
    Type
    For Use With
    Each
    Pkg.
    Qty.
    Pkg.
    1JugAluminum, Brass, Carbide, Cast Iron, Copper, Stainless Steel, Steel, Titanium0000000000006000000000000000
    5PailAluminum, Brass, Carbide, Cast Iron, Copper, Stainless Steel, Steel, Titanium000000000000————0
     

    Grinding, Sanding, and Finishing Coolants

    Image of Product. Front orientation. Coolants. Grinding, Sanding, and Finishing Coolants, Jug.
    Image of Product. Front orientation. Coolants. Grinding, Sanding, and Finishing Coolants, Pail.

    Jug

    Pail

    For general-purpose grinding, sanding, and finishing, these coolants prevent material from building up to ensure a high-quality finish and preserve tool life. All are sulfur free.
    Lubricants without chlorine can be used where chlorine waste disposal is a concern.
    Oil Based—Dilute oil-based coolants with water.
    Mineral Base Oil—Mineral-oil-based coolants are economical for quick jobs and touch-ups.
    Semi-Synthetic Base Oil—Semi-synthetic-oil-based coolants are a mix of mineral and synthetic oil for extra lubricity and long-lasting performance.
    Chlorine Additive—Lubricants with chlorine resist high pressure and are for use with difficult-to-machine material, such as stainless steel and hard metal.
    Container
    Each
    Package
    Size,
    gal.
    Type
    Additive
    For Use With
    Each
    Pkg.
    Qty.
    Pkg.
    Oil Based
     
    Mineral Base Oil
    1JugChlorineAluminum, Brass, Carbide, Cast Iron, Copper, Stainless Steel, Steel, Titanium00000000000006000000000000000
    5PailChlorineAluminum, Brass, Carbide, Cast Iron, Copper, Stainless Steel, Steel, Titanium0000000000000————0
     
    Semi-Synthetic Base Oil
    1Jug—Aluminum, Brass, Carbide, Cast Iron, Copper, Stainless Steel, Steel, Titanium000000000000600000000000000
    5Pail—Aluminum, Brass, Carbide, Cast Iron, Copper, Stainless Steel, Steel, Titanium0000000000000————0
     

    Food and Beverage Milling, Turning, and Sawing Lubricants

    Image of Product. Front orientation. Machining and Fabricating Lubricants. Food and Beverage Milling, Turning, and Sawing Lubricants, Jug.
    Image of Product. Front orientation. Machining and Fabricating Lubricants. Food and Beverage Milling, Turning, and Sawing Lubricants, Pail.

    Jug

    Pail

    For use in food-processing and preparation areas, these lubricants are NSF registered H1 for incidental food contact. They reduce friction between your cutting tool and workpiece to make cutting cycles faster and easier, improve surface finishes, and extend tool life. Lubricants are chlorine free, for use where chlorine waste disposal is a concern, and sulfur free. Use at full strength.
    Container
    Each
    Package
    Size,
    gal.
    Type
    Food Industry
    Std.
    For Use With
    Each
    Pkg.
    Qty.
    Pkg.
    1JugNSF Registered H1
    		Aluminum, Brass, Carbide, Cast Iron, Copper, Stainless Steel, Steel, Titanium0000000000006000000000000000
    5PailNSF Registered H1
    		Aluminum, Brass, Carbide, Cast Iron, Copper, Stainless Steel, Steel, Titanium000000000000————0
     

    Long-Life Grinding, Sanding, and Finishing Coolants

    Image of Product. Front orientation. Coolants. Long-Life Grinding, Sanding, and Finishing Coolants, Jug.
    Image of Product. Front orientation. Coolants. Long-Life Grinding, Sanding, and Finishing Coolants, Pail.

    Jug

    Pail

    Increase the time between coolant changes—wear-resistant properties allow these coolants to perform longer than standard grinding coolants. They prevent material from building up to ensure a high-quality finish and preserve tool life. Coolants inhibit bacteria growth to prevent foul odors. They are sulfur free. Dilute with water.
    Mineral Base Oil—Mineral-oil-based coolants have chlorine additives to handle hard metal, such as stainless steel and titanium.
    Container
    Each
    Package
    Size,
    gal.
    Type
    Additive
    For Use With
    Each
    Pkg.
    Qty.
    Pkg.
    Mineral Base Oil
    1JugChlorineAluminum, Brass, Carbide, Cast Iron, Copper, Stainless Steel, Steel, Titanium00000000000006000000000000000
    5PailChlorineAluminum, Brass, Carbide, Cast Iron, Copper, Stainless Steel, Steel, Titanium0000000000000————0
     

    Milling, Drilling, and Turning Coolants for Nearly Dry Machining

    Image of Product. Front orientation. Coolants. Milling, Drilling, and Turning Coolants for Nearly Dry Machining, Squeeze Bottle.

    Squeeze

    Bottle

    Apply these coolants to your cutting tools before and during milling and machining to reduce heat with very little cleanup. They are chlorine free, for use where chlorine waste disposal is a concern, and sulfur free. Use at full strength.
    Oil Based—Remove oil-based coolants with alcohol, methyl ethyl ketone, or a parts washer.
    Container
    Each
    Package
    Size, fl.
    oz.
    Type
    For Use With
    Each
    Pkg.
    Qty.
    Pkg.
    Oil Based
     
    Machining and Fabricating Lubricants—Synthetic Base Oil
    4Squeeze BottleAluminum, Brass, Carbide, Cast Iron, Copper, Stainless Steel, Steel, Titanium00000000000036000000000000000
     

    Solid and Paste Milling, Drilling, and Turning Coolants

    Image of Product. Front orientation. Coolants. Solid and Paste Milling, Drilling, and Turning Coolants, Jar.

    Jar

    An alternative to nearly dry machining, apply these coolants to tools before milling and machining to reduce heat with minimal cleanup. They’re often used with shallow drilling, reaming, and tapping, as well as on saw blades. Remove from tools and work surfaces with alcohol, methyl ethyl ketone, or a parts washer. They are chlorine free, for use where chlorine waste disposal is a concern, and sulfur free. Use at full strength.
    Jar—Coolant in a jar is a paste. It can also be used as a bending and forming paste.
    Container
    Each
    Package
    Size, fl.
    oz.
    Type
    For Use With
    Each
    Pkg.
    Qty.
    Pkg.
    Synthetic Base Oil
    12JarAluminum, Brass, Carbide, Cast Iron, Copper, Stainless Steel, Steel, Titanium00000000000012000000000000000
     
    back to top