For Use With For Use With |
|---|
|
Overall Width Overall Width |
|---|
Tube Material Tube Material |
|---|
|
ID ID |
|---|
Maximum Pressure Maximum Pressure |
|---|
Connection Style Connection Style |
|---|
|
Cooling Capacity Cooling Capacity |
|---|
|
Overall Height Overall Height |
|---|
|
|
|
DFARS (Defense Acquisition Regulations Supplement) DFARS (Defense AcquisitionRegulations Supplement)  |
|---|
RoHS (Restriction of Hazardous Substances) RoHS (Restriction ofHazardous Substances) |
|---|
|
REACH (Registration, Evaluation, Authorization and Restriction of Chemicals) REACH (Registration,Evaluation, Authorization and Restriction of Chemicals) |
|---|
|
About Metal Tubing
More
Heat Sinks for Water
A fan cools water as it moves through the tubes to dissipate heat. These heat sinks have flanges with mounting slots for installation in frames and cabinets. Overall height, width, and depth do not include tube ends.
Heat sinks with 316 stainless steel tubes have excellent corrosion resistance to withstand deionized water and other corrosive liquid.
For technical drawings and 3-D models, click on a part number.
Overall | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Cooling Cap., Btu/hr. | Ht. | Wd. | Dp. | Heat Sink Material | No. of Fans | Max. Pressure, psi | Max. Flow Rate, gpm | Max. Temp., °F | Voltage (Electrical Phase) | Cord Lg., ft. | Mount. Slot Wd. | Tube OD | Choose a Tube Connection Type | Each | |
Copper Tube—For Use With Water | |||||||||||||||
| 1,300 | 6 9/16" | 6 3/4" | 2 13/16" | Copper | 1 | 150 | 2 | 400° | 120V AC (Single) | 2 | 3/16" | 3/8" | 00000000 | 0000000 | |
| 1,500 | 5 3/4" | 6 1/2" | 3 5/8" | Copper | 1 | 150 | 2 | 400° | 120V AC (Single) | 2 | 7/32" | 3/8" | 00000000 | 000000 | |
| 2,200 | 5 3/4" | 11 3/8" | 3 5/16" | Copper | 2 | 150 | 2 | 400° | 120V AC (Single) | 2 | 7/32" | 3/8" | 00000000 | 000000 | |
| 4,200 | 9" | 9 11/16" | 4 1/2" | Copper | 1 | 150 | 2 | 400° | 120V AC (Single) | 2 | 7/32" | 3/8" | 00000000 | 000000 | |
| 4,400 | 12" | 11 11/16" | 6 1/16" | Copper | 1 | 150 | 4 | 400° | 120V AC (Single) | 2 | 7/32" | 1/2" | 00000000 | 00000000 | |
| 7,100 | 9" | 17 11/16" | 4 1/2" | Copper | 2 | 150 | 2 | 400° | 120V AC (Single) | 2 | 7/32" | 3/8" | 00000000 | 00000000 | |
| 8,800 | 12" | 21 15/16" | 5 5/8" | Copper | 2 | 150 | 4 | 400° | 120V AC (Single) | 2 | 7/32" | 1/2" | 00000000 | 00000000 | |
316 Stainless Steel Tube—For Use With Corrosive Liquid, Deionized Water | |||||||||||||||
| 1,300 | 6 9/16" | 7" | 2 13/16" | Stainless Steel | 1 | 150 | 2 | 400° | 120V AC (Single) | 2 | 3/16" | 3/8" | 00000000 | 000000 | |
| 1,500 | 5 13/16" | 6 1/8" | 3 11/16" | Stainless Steel | 1 | 150 | 2 | 400° | 120V AC (Single) | 2 | 3/16" | 3/8" | 00000000 | 00000000 | |
| 2,200 | 5 13/16" | 10 7/8" | 3 11/16" | Stainless Steel | 2 | 150 | 2 | 400° | 120V AC (Single) | 2 | 3/16" | 3/8" | Plain | 000000000 | 00000000 |
| 4,200 | 9" | 9 3/16" | 4 13/16" | Stainless Steel | 1 | 150 | 2 | 400° | 120V AC (Single) | 2 | 3/16" | 3/8" | 00000000 | 00000000 | |
| 4,400 | 12" | 11 3/16" | 6 1/16" | Stainless Steel | 1 | 150 | 4 | 400° | 120V AC (Single) | 2 | 3/16" | 1/2" | Plain | 000000000 | 00000000 |
| 7,100 | 9" | 17 3/16" | 4 1/2" | Stainless Steel | 2 | 150 | 2 | 400° | 120V AC (Single) | 2 | 3/16" | 3/8" | Plain | 000000000 | 00000000 |
| 8,800 | 12" | 21 3/16" | 6 1/16" | Stainless Steel | 2 | 150 | 4 | 400° | 120V AC (Single) | 2 | 3/16" | 1/2" | Plain | 000000000 | 00000000 |
Heat Sinks for Oil
Dozens of fins and coolant tubes quickly dissipate excess heat. Also known as oil coolers, these heat sinks cool hydraulic fluid and lubricating oil in cylinders and compressors. Cooling and flow capacities are based on 50 SSU oil, 1,000 feet per minute of air, a 50° F initial temperature difference, and a 10 psi pressure drop.
Mounting kits (sold separately) are required for installation.
For technical drawings and 3-D models, click on a part number.
Overall | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Cooling Cap., Btu/hr. | Pipe Size | Thread Type | Gender | Ht. | Wd. | Dp. | Heat Sink Material | Max. Pressure, psi | Max. Flow Rate, gpm | Max. Temp., °F | No. of Mount. Kits Required | Each | |
Copper Tube—For Use with Oil | |||||||||||||
| 3,300 | 1/2 | NPT | Female | 4 1/2" | 15" | 1 1/2" | Aluminum | 300 | 7 | 350° | 2 | 0000000 | 0000000 |
| 6,100 | 1/2 | NPT | Female | 6 1/2" | 18" | 1 1/2" | Aluminum | 300 | 9 | 350° | 4 | 0000000 | 000000 |
| 8,100 | 1/2 | NPT | Female | 6 1/2" | 24" | 1 1/2" | Aluminum | 300 | 7 | 350° | 4 | 0000000 | 000000 |
| 9,600 | 1/2 | NPT | Female | 8 1/2" | 21" | 1 1/2" | Aluminum | 300 | 11 | 350° | 4 | 0000000 | 000000 |
| 11,800 | 3/4 | NPT | Female | 12 3/4" | 18" | 1 1/2" | Aluminum | 300 | 19 | 350° | 4 | 0000000 | 000000 |
| 24,000 | 3/4 | NPT | Female | 18 3/4" | 24" | 1 1/2" | Aluminum | 300 | 22 | 350° | 6 | 0000000 | 000000 |
| 31,000 | 1 | NPT | Female | 25" | 24" | 1 1/2" | Aluminum | 300 | 28 | 350° | 8 | 0000000 | 000000 |
| 49,000 | 1 | NPT | Female | 31" | 30" | 1 1/2" | Aluminum | 300 | 30 | 350° | 8 | 0000000 | 000000 |
| 57,000 | 1 1/4 | NPT | Female | 37 7/16" | 30" | 1 1/2" | Aluminum | 300 | 36 | 350° | 8 | 0000000 | 00000000 |
| Includes | Each | |
| Two Carriage Bolts, Two Flat Washers, Two Lock Washers, Two Nuts, Two Rubber Blocks | 0000000 | 000000 |
Cold Plates
Connect these plates to cold liquid lines in process chillers and liquid-to-air cooling systems to cool equipment through direct contact. All have U-shaped tubes that pass through a thermally conductive aluminum plate. Drill or tap the plate for mounting.
Cold plates with 316 stainless steel tubes can stand up to corrosive liquid and deionized water.
For technical drawings and 3-D models, click on a part number.
Cleaned and Capped Copper Tubing
- Temperature Range: 32° to 400° F
- Bending Method: Tube Bender
- Compatible Tube Fittings: Compression and Solder Connect
This tubing comes cleaned and capped to prevent moisture and dirt from contaminating the inside. It is also known as refrigeration and air conditioning tubing. Tubing has good corrosion resistance and excellent heat transfer qualities. It is seamless, which provides a smooth interior for unrestricted flow. It can be flared without splitting.
Note: Copper tube size is an accepted industry designation, not an actual size.
For technical drawings and 3-D models, click on a part number.
| Copper Tube Size | OD | Wall Thick. | ID | Max. Pressure | Temper Rating | 50 ft. | 100 ft. | |
For Use With Natural Gas, Oil, R22 Refrigerant, Water | ||||||||
|---|---|---|---|---|---|---|---|---|
| __ | 1/8" | 0.03" | 0.065" | 3,000 psi @ 72° F | Soft | 000000 | ||
| __ | 3/16" | 0.03" | 0.128" | 1,900 psi @ 72° F | Soft | 000000 | ||
| __ | 1/4" | 0.03" | 0.19" | 1,400 psi @ 72° F | Soft | 0000000 | ||
| __ | 5/16" | 0.032" | 0.248" | 1,100 psi @ 72° F | Soft | 0000000 | ||
| 1/4 | 3/8" | 0.032" | 0.311" | 980 psi @ 72° F | Soft | 0000000 | ||
| 3/8 | 1/2" | 0.032" | 0.436" | 720 psi @ 72° F | Soft | 0000000 | ||
| 1/2 | 5/8" | 0.035" | 0.555" | 610 psi @ 72° F | Soft | 0000000 | ||
| 5/8 | 3/4" | 0.035" | 0.68" | 510 psi @ 72° F | Soft | 0000000 | ||
| 3/4 | 7/8" | 0.045" | 0.785" | 580 psi @ 72° F | Soft | 0000000 | ||
| 1 | 1 1/8" | 0.05" | 1.025" | 490 psi @ 72° F | Soft | 0000000 | ||
| 1 1/4 | 1 3/8" | 0.055" | 1.265" | 430 psi @ 72° F | Soft | 0000000 | ||
| 1 1/2 | 1 5/8" | 0.06" | 1.505" | 400 psi @ 72° F | Soft | 0000000 | ||
General Purpose Copper Tubing
This tubing has good corrosion resistance and excellent heat transfer qualities. It is seamless, which provides a smooth interior for unrestricted flow. It can be flared without splitting. All tubing meets international standards for copper tubing.
Note: Copper tube size is an accepted industry designation, not an actual size.
For technical drawings and 3-D models, click on a part number.
- Temperature Range: -420° to 400° F
- Bending Method: By Hand
- Specifications Met: ASTM B75
- Compatible Tube Fittings: Compression and Solder Connect
| Copper Tube Size | OD | Wall Thick. | ID | Max. Pressure | Temper Rating | 10 ft. | 50 ft. | |
For Use With Air, Hydraulic Fluid, Oil, Water | ||||||||
|---|---|---|---|---|---|---|---|---|
| __ | 1/4" | 0.049" | 0.152" | 2,200 psi @ 72° F | Soft | 00000000 | ||
| __ | 1/4" | 0.065" | 0.12" | 2,900 psi @ 72° F | Soft | 00000000 | ||
| __ | 5/16" | 0.049" | 0.215" | 1,700 psi @ 72° F | Soft | 00000000 | ||
| __ | 5/16" | 0.065" | 0.183" | 2,200 psi @ 72° F | Soft | 00000000 | ||
| 1/4 | 3/8" | 0.049" | 0.277" | 1,400 psi @ 72° F | Soft | 00000000 | ||
| 1/4 | 3/8" | 0.065" | 0.245" | 1,800 psi @ 72° F | Soft | 00000000 | ||
| 3/8 | 1/2" | 0.049" | 0.402" | 1,000 psi @ 72° F | Soft | 00000000 | ||
| 3/8 | 1/2" | 0.065" | 0.37" | 1,400 psi @ 72° F | Soft | 00000000 | ||
| 1/2 | 5/8" | 0.065" | 0.495" | 1,000 psi @ 72° F | Soft | 00000000 | ||
| 5/8 | 3/4" | 0.065" | 0.62" | 890 psi @ 72° F | Soft | 00000000 | ||
| __ | 1" | 0.065" | 0.87" | 640 psi @ 72° F | Soft | 00000000 | ||
- Temperature Range: -20° to 400° F
- Bending Method: Tube Bender
- Specifications Met: ASTM B68, ASTM B75
- Compatible Tube Fittings: Solder Connect
10 m | ||||||
|---|---|---|---|---|---|---|
| OD, mm | Wall Thick., mm | ID, mm | Max. Pressure | Temper Rating | Each | |
For Use With Air, Hydraulic Fluid, Oil, Water | ||||||
| 4 | 1 | 2 | 3,400 psi @ 72° F | Soft | 0000000 | 0000000 |
| 6 | 1 | 4 | 2,000 psi @ 72° F | Soft | 0000000 | 000000 |
| 8 | 1 | 6 | 1,300 psi @ 72° F | Soft | 0000000 | 000000 |
| 10 | 1 | 8 | 1,000 psi @ 72° F | Soft | 0000000 | 000000 |
| 12 | 1 | 10 | 790 psi @ 72° F | Soft | 0000000 | 000000 |
| 14 | 1 | 12 | 840 psi @ 72° F | Soft | 0000000 | 000000 |
| 16 | 1 | 14 | 730 psi @ 72° F | Soft | 0000000 | 000000 |
| 18 | 1 | 16 | 730 psi @ 72° F | Soft | 0000000 | 000000 |
Precision Steel Tubing
- Temperature Range: -40° to 250° F
- Bending Method: Tube Bender
- Compatible Tube Fittings: Compression
With the lowest OD tolerance of all our steel tubing, this tubing is designed for precision applications. Also known as Bundyweld tubing, it is plated with copper and rolled into a tube, then the copper is melted to form a strong cohesive bond. For added corrosion resistance, tubing is finished with a coat of aluminum-based paint or zinc.
For technical drawings and 3-D models, click on a part number.
25 ft. | |||||||
|---|---|---|---|---|---|---|---|
| OD | OD Tolerance | Wall Thick. | ID | Max. Pressure | Temper Rating | Each | |
Painted Steel | |||||||
For Use With Hydraulic Fluid and R22 Refrigerant | |||||||
| 3/16" | -0.003" to 0.003" | 0.028" | 0.132" | 3,600 psi @ 72° F | Soft | 0000000 | 000000 |
| 1/4" | -0.003" to 0.003" | 0.028" | 0.194" | 2,600 psi @ 72° F | Soft | 0000000 | 00000 |
Zinc-Plated Steel | |||||||
For Use With Hydraulic Fluid and R22 Refrigerant | |||||||
| 5/16" | -0.003" to 0.003" | 0.028" | 0.257" | 2,100 psi @ 72° F | Soft | 0000000 | 00000 |
| 3/8" | -0.003" to 0.003" | 0.028" | 0.319" | 1,600 psi @ 72° F | Soft | 0000000 | 00000 |