Diameter Diameter |
|---|
Shape Shape |
|---|
 |  |
| Rod and Disc | Round Tube |
 | |
| Ball |
Material Material |
|---|
|
|
Thermal Conductivity Thermal Conductivity |
|---|
|
Specifications Met Specifications Met |
|---|
|
Density Density |
|---|
|
Yield Strength Yield Strength |
|---|
|
Appearance Appearance |
|---|
|
ID ID |
|---|
|
|
|
Certificate Certificate |
|---|
 | Material Certificate with Traceable Lot Number |
About Copper, Brass, and Bronze
More
Multipurpose 110 Copper Rods and Discs
- Yield Strength:
Inch sizes: Not Rated
Metric sizes: 17,000 psi - Hardness:
Inch sizes: Rockwell F65 (Soft)
Metric sizes: Brinell 35 (Soft) - Temper:
Inch sizes: H04 (Full Hard)
Metric sizes: Not Rated - Heat Treatable: No
- Specifications Met:
Inch sizes: ASTM B187
Metric sizes: European Standard EN 13601
Offering high electrical conductivity and formability, 110 copper is 99.9% pure. Also known as ETP copper, it's often used in electrical applications, such as for bus bars and wire connectors, as well as for flashing, gaskets, and rivets.
| Dia. | Dia. Tolerance Range | Straightness Tolerance | 1/2 ft. Lg. | 1 ft. Lg. | 2 ft. Lg. | 3 ft. Lg. | 6 ft. Lg. | |
| 1/8" | -0.002" to 0.002" | 1/2" per 10 ft. | 0000000 | |||||
| 3/16" | -0.002" to 0.002" | 1/2" per 10 ft. | 000000 | |||||
| 1/4" | -0.002" to 0.002" | 1/2" per 10 ft. | 000000 | |||||
| 5/16" | -0.002" to 0.002" | 1/2" per 10 ft. | 000000 | |||||
| 3/8" | -0.002" to 0.002" | 1/2" per 10 ft. | 0000000 | |||||
| 7/16" | -0.002" to 0.002" | 1/2" per 10 ft. | 0000000 | |||||
| 1/2" | -0.002" to 0.002" | 1/2" per 10 ft. | 0000000 | |||||
| 9/16" | -0.002" to 0.002" | 1/2" per 10 ft. | 0000000 | |||||
| 5/8" | -0.002" to 0.002" | 1/2" per 10 ft. | 0000000 | |||||
| 3/4" | -0.002" to 0.002" | 1/2" per 10 ft. | 0000000 | |||||
| 13/16" | -0.002" to 0.002" | 1/2" per 10 ft. | 0000000 | |||||
| 7/8" | -0.002" to 0.002" | 1/2" per 10 ft. | 0000000 | |||||
| 1" | -0.002" to 0.002" | 1/2" per 10 ft. | 0000000 | |||||
| 1 1/8" | -0.009" to 0.009" | 1/2" per 10 ft. | 0000000 | |||||
| 1 1/4" | -0.009" to 0.009" | 1/2" per 10 ft. | 0000000 | |||||
| 1 3/8" | -0.009" to 0.009" | 1/2" per 10 ft. | 0000000 | |||||
| 1 1/2" | -0.009" to 0.009" | 1/2" per 10 ft. | 0000000 | |||||
| 1 5/8" | -0.009" to 0.009" | 1/2" per 10 ft. | 0000000 | |||||
| 1 3/4" | -0.009" to 0.009" | 1/2" per 10 ft. | 0000000 | |||||
| 2" | -0.009" to 0.009" | 1/2" per 10 ft. | 0000000 | |||||
| 2 1/4" | -0.009" to 0.009" | 1/2" per 10 ft. | 0000000 | |||||
| 2 1/2" | -0.009" to 0.009" | 1/2" per 10 ft. | 0000000 | |||||
| 2 3/4" | -0.009" to 0.009" | 1/2" per 10 ft. | 0000000 | |||||
| 3" | -0.009" to 0.009" | 1/2" per 10 ft. | 0000000 | |||||
| 3 1/2" | -0.009" to 0.009" | 1/2" per 10 ft. | 0000000 | |||||
| 4" | -0.009" to 0.009" | 1/2" per 10 ft. | 0000000 | |||||
| 5" | -0.009" to 0.009" | 1/2" per 10 ft. | 0000000 | |||||
| 6" | -0.009" to 0.009" | 1/2" per 10 ft. | 0000000 |
| Dia. | Dia. Tolerance Range | Straightness Tolerance | 1/2" Lg. | 1" Lg. | 2" Lg. | 3" Lg. | 4" Lg. | |
| 1" | -0.002" to 0.002" | 1/2" per 10 ft. | 000000 | |||||
| 1 1/2" | -0.009" to 0.009" | 1/2" per 10 ft. | 000000 | |||||
| 2" | -0.009" to 0.009" | 1/2" per 10 ft. | 000000 | |||||
| 2 1/2" | -0.009" to 0.009" | 1/2" per 10 ft. | 000000 | |||||
| 3" | -0.009" to 0.009" | 1/2" per 10 ft. | 000000 | |||||
| 4" | -0.009" to 0.009" | 1/2" per 10 ft. | 000000 | |||||
| 5" | -0.009" to 0.009" | 1/2" per 10 ft. | 000000 | |||||
| 6" | -0.009" to 0.009" | 1/2" per 10 ft. | 000000 |
Super-Conductive 101 Copper Rods and Discs
- Yield Strength: Not Rated
- Hardness: See table
- Temper:
6" dia. rods and discs: Not Rated
All other sizes: H04 (Full Hard) - Heat Treatable: No
- Specifications Met: See table
With 99.99% copper content, 101 copper has higher purity than 110 copper, resulting in superior electrical conductivity. It's commonly called OFE and OFHC copper. Use it in electrical applications, such as for coaxial cables and terminal lugs.
| Dia. | Dia. Tolerance Range | Hardness | Specifications Met | Straightness Tolerance | 1/2 ft. Lg. | 1 ft. Lg. | 2 ft. Lg. | 3 ft. Lg. | 6 ft. Lg. | |
| 1/8" | -0.008" to 0.008" | Rockwell F65 (Soft) | ASTM B187 | 1/2" per 6 ft. | 0000000 | |||||
| 5/32" | -0.008" to 0.008" | Rockwell F65 (Soft) | ASTM B187 | 1/2" per 6 ft. | 0000000 | |||||
| 3/16" | -0.008" to 0.008" | Rockwell F65 (Soft) | ASTM B187 | 1/2" per 6 ft. | 0000000 | |||||
| 1/4" | -0.008" to 0.008" | Rockwell F65 (Soft) | ASTM B187 | 1/2" per 6 ft. | 0000000 | |||||
| 5/16" | -0.008" to 0.008" | Rockwell F65 (Soft) | ASTM B187 | 1/2" per 6 ft. | 0000000 | |||||
| 3/8" | -0.008" to 0.008" | Rockwell F65 (Soft) | ASTM B187 | 1/2" per 6 ft. | 0000000 | |||||
| 7/16" | -0.008" to 0.008" | Rockwell F65 (Soft) | ASTM B187 | 1/2" per 6 ft. | 0000000 | |||||
| 1/2" | -0.008" to 0.008" | Rockwell F65 (Soft) | ASTM B187 | 1/2" per 6 ft. | 0000000 | |||||
| 9/16" | -0.008" to 0.008" | Rockwell F65 (Soft) | ASTM B187 | 1/2" per 6 ft. | 0000000 | |||||
| 5/8" | -0.008" to 0.008" | Rockwell F65 (Soft) | ASTM B187 | 1/2" per 6 ft. | 0000000 | |||||
| 11/16" | -0.008" to 0.008" | Rockwell F65 (Soft) | ASTM B187 | 1/2" per 6 ft. | 0000000 | |||||
| 3/4" | -0.008" to 0.008" | Rockwell F65 (Soft) | ASTM B187 | 1/2" per 6 ft. | 0000000 | |||||
| 7/8" | -0.008" to 0.008" | Rockwell F65 (Soft) | ASTM B187 | 1/2" per 6 ft. | 0000000 | |||||
| 1" | -0.008" to 0.008" | Rockwell F65 (Soft) | ASTM B187 | 1/2" per 6 ft. | 0000000 | |||||
| 1 1/8" | -0.008" to 0.008" | Rockwell F65 (Soft) | ASTM B187 | 1/2" per 6 ft. | 0000000 | |||||
| 1 1/4" | -0.008" to 0.008" | Rockwell F65 (Soft) | ASTM B187 | 1/2" per 6 ft. | 0000000 | |||||
| 1 1/2" | -0.008" to 0.008" | Rockwell F65 (Soft) | ASTM B187 | 1/2" per 6 ft. | 0000000 | |||||
| 2" | -0.008" to 0.008" | Rockwell F65 (Soft) | ASTM B187 | 1/2" per 6 ft. | 0000000 | |||||
| 2 1/2" | -0.008" to 0.008" | Rockwell F65 (Soft) | ASTM B187 | 1/2" per 6 ft. | 0000000 | |||||
| 3" | -0.008" to 0.008" | Rockwell F65 (Soft) | ASTM B187 | 1/2" per 6 ft. | 0000000 |
| Dia. | Dia. Tolerance Range | Hardness | Specifications Met | 1" Lg. | 2" Lg. | 3" Lg. | 4" Lg. | 5" Lg. | 6" Lg. | |
| 2" | -0.008" to 0.008" | Rockwell F75 (Soft) | ASTM B187, ASTM F68 | 0000000 | ||||||
| 3" | -0.008" to 0.008" | Rockwell F75 (Soft) | ASTM B187, ASTM F68 | 0000000 | ||||||
| 4" | -0.008" to 0.008" | Rockwell F75 (Soft) | ASTM B187, ASTM F68 | 0000000 | ||||||
| 5" | -0.01" to 0.01" | Rockwell F75 (Soft) | ASTM B187, ASTM F68 | 0000000 | ||||||
| 6" | -0.063" to 0.063" | Not Rated | ASTM B187, ASTM F68 | 0000000 |
Titanium-Clad Super-Conductive 101 Copper Rods
- Yield Strength: Not Rated
- Hardness: Not Rated
- Temper Rating: Not Rated
- Heat Treatable: No
A thin layer of titanium is bonded to these copper rods for long life and dimensional stability in corrosive environments. With 99.99% copper content, 101 copper has higher purity than 110 copper, resulting in superior electrical conductivity. It's commonly called OFE and OFHC copper. Use it in electrical applications, such as for coaxial cables and terminal lugs.
Certificates with a traceable lot number are available for these products. Download certificates from ACTIVITY after your order ships.
Super-Conductive 101 Copper Tubes
- Yield Strength: 30,000 psi
- Hardness: Rockwell F90 (Soft)
- Temper: H80 (Full Hard)
- Heat Treatable: No
- Specifications Met: ASTM B75, ASTM F68
With 99.99% copper content, 101 copper has higher purity than 110 copper, resulting in superior electrical conductivity. It's commonly called OFE and OFHC copper. Use it in electrical applications, such as for coaxial cables and terminal lugs.
| OD | OD Tolerance Range | ID | Straightness Tolerance | 1 ft. Lg. | 3 ft. Lg. | 6 ft. Lg. | |
0.032" Wall Thick. (-0.006" to 0.006" Tolerance) | |||||||
|---|---|---|---|---|---|---|---|
| 1/8" | -0.003" to 0.003" | 0.061" | 0.5" | 0000000 | |||
| 3/16" | -0.003" to 0.003" | 0.124" | 0.5" | 0000000 | |||
| 3/8" | -0.003" to 0.003" | 0.311" | 0.5" | 0000000 | |||
| 1/2" | -0.003" to 0.003" | 0.436" | 0.5" | 0000000 | |||
| 3/4" | -0.003" to 0.003" | 0.686" | 0.5" | 0000000 | |||
0.035" Wall Thick. (-0.006" to 0.006" Tolerance) | |||||||
| 1/4" | -0.003" to 0.003" | 0.18" | 0.5" | 0000000 | |||
0.065" Wall Thick. (-0.006" to 0.006" Tolerance) | |||||||
| 3/8" | -0.003" to 0.003" | 0.245" | 0.5" | 0000000 | |||
| 1/2" | -0.003" to 0.003" | 0.37" | 0.5" | 0000000 | |||
| 3/4" | -0.003" to 0.003" | 0.62" | 0.5" | 0000000 | |||
1/8" Wall Thick. (-0.006" to 0.006" Tolerance) | |||||||
| 1" | -0.003" to 0.003" | 3/4" | 0.5" | 0000000 | |||
Super-Conductive 102 Copper Balls
- Yield Strength: Not Rated
- Hardness: Not Rated
- Temper: H04 (Full Hard)
- Heat Treatable: No
- Specifications Met: ASTM B2, ASTM B3
With 99.99% copper content, 102 copper has higher purity than 110 copper, resulting in superior electrical conductivity. It's commonly called OFE and OFHC copper. Use it in electrical applications, such as for coaxial cables and terminal lug.
For technical drawings and 3-D models, click on a part number.
Easy-to-Machine 145 Copper Rods
- Yield Strength: 30,000 psi
- Hardness: Not Rated
- Temper: H02 (1/2 Hard)
- Heat Treatable: No
Also called tellurium copper, 145 copper contains tellurium, which makes it more machinable than all other copper while maintaining good corrosion resistance and high electrical conductivity. It’s often used for transformer and circuit-breaker terminals, welding torch tips, and fasteners.
For technical drawings and 3-D models, click on a part number.
Certificates with a traceable lot number are available for these products. Download certificates from ACTIVITY after your order ships.
| Dia. | Dia. Tolerance | 1 ft. Lg. | 3 ft. Lg. | 6 ft. Lg. | |
| 1/8" | -0.0025" to 0.0025" | 0000000 | |||
| 3/16" | -0.0025" to 0.0025" | 0000000 | |||
| 1/4" | -0.0025" to 0.0025" | 0000000 | |||
| 5/16" | -0.0025" to 0.0025" | 0000000 | |||
| 3/8" | -0.0025" to 0.0025" | 0000000 | |||
| 1/2" | -0.0025" to 0.0025" | 0000000 | |||
| 5/8" | -0.0025" to 0.0025" | 0000000 | |||
| 3/4" | -0.0025" to 0.0025" | 0000000 | |||
| 7/8" | -0.0025" to 0.0025" | 0000000 | |||
| 1" | -0.0025" to 0.0025" | 0000000 | |||
| 1 1/8" | -0.0025" to 0.0025" | 0000000 | |||
| 1 1/4" | -0.0025" to 0.0025" | 0000000 | |||
| 1 3/8" | -0.0025" to 0.0025" | 0000000 | |||
| 1 1/2" | -0.0025" to 0.0025" | 0000000 | |||
| 1 5/8" | -0.0025" to 0.0025" | 0000000 | |||
| 1 3/4" | -0.0025" to 0.0025" | 0000000 | |||
| 2" | -0.0025" to 0.0025" | 0000000 |
High-Strength 182 Copper Rods
- Yield Strength: Not Rated
- Hardness: Hardness B70 (Medium)
- Temper: H04 (Full Hard)
- Heat Treatable: Yes
182 copper is stronger, harder, and more wear resistant than 110 copper. Also known as RWMA Class 2 chromium copper, it's commonly used in resistance welding, for circuit-breaker parts, and for molds to make plastic parts.
For technical drawings and 3-D models, click on a part number.
Certificates with a traceable lot number are available for these products. Download certificates from ACTIVITY after your order ships.
| Dia. | Dia. Tolerance | 1 ft. Lg. | 3 ft. Lg. | 6 ft. Lg. | |
| 1/8" | -0.003" to 0.003" | 000000000 | |||
| 3/16" | -0.003" to 0.003" | 000000000 | |||
| 1/4" | -0.003" to 0.003" | 000000000 | |||
| 3/8" | -0.003" to 0.003" | 000000000 | |||
| 1/2" | -0.003" to 0.003" | 000000000 | |||
| 5/8" | -0.005" to 0.005" | 000000000 | |||
| 3/4" | -0.005" to 0.005" | 000000000 | |||
| 1" | -0.005" to 0.005" | 000000000 | |||
| 1 1/4" | -0.005" to 0.005" | 000000000 | |||
| 1 1/2" | -0.005" to 0.005" | 000000000 |
Weldable 122 Copper Tubes
- Yield Strength: Not Rated
- Hardness: Not Rated
- Temper: H02 (1/2 Hard)
- Heat Treatable: No
- Specifications Met: ASTM B251
The addition of phosphorus makes 122 copper easier to weld and braze than 110 copper. It has excellent resistance to corrosion caused by water, soil, and weather, making it the go-to material for plumbing and underground applications. It’s also used for storage tanks and chemical equipment. It's less electrically conductive than other copper. Each tube fits inside the next larger size for creating telescoping tubes.
For technical drawings and 3-D models, click on a part number.
1 ft. Lg. | 6 ft. Lg. | ||||||
|---|---|---|---|---|---|---|---|
| OD | OD Tolerance Range | ID | Pkg. Qty. | Pkg. | Each | ||
0.014" Wall Thick. (-0.001" to 0.001" Tolerance) | |||||||
| 1/16" | -0.002" to 0.002" | 0.035" | 3 | 0000000 | 00000 | 0000000 | 00000 |
| 3/32" | -0.002" to 0.002" | 0.066" | 3 | 0000000 | 0000 | 0000000 | 0000 |
| 1/8" | -0.002" to 0.002" | 0.097" | 1 | 0000000 | 0000 | 0000000 | 0000 |
| 5/32" | -0.002" to 0.002" | 0.128" | 1 | 0000000 | 0000 | 0000000 | 0000 |
| 3/16" | -0.002" to 0.002" | 0.16" | 1 | 0000000 | 0000 | 0000000 | 00000 |
| 7/32" | -0.002" to 0.002" | 0.191" | 1 | 0000000 | 0000 | 0000000 | 00000 |
| 1/4" | -0.002" to 0.002" | 0.222" | 1 | 0000000 | 0000 | 0000000 | 00000 |