Run these cords through high-traffic areas in dirty and greasy environments. They have a thick insulation that resists water, oil, and chemicals, and protects against abrasion.

SOOW cords have both an outer and inner insulation that resists oil, making them more durable than SEOW cords, which only have an outer insulation. SOOW cords also have impact-resistant connectors.

Keep personnel safe from electric shock with these cords. The industry desgination is SJTW, so the insulation resists water.

Cords with manual GFCI reset prevent unexpected start-up.

Cord with a power-indicating light have a light on the socket that illuminates when the cord has power.

Avoid the clutter of multiple extension cords and overcrowded outlet strips—these extension cords have outlet boxes spread evenly along their length. They’re great for powering temporary workstations and areas with few wall outlets, such as construction or maintenance sites.

Each outlet box has cord grips on both ends for a connection that isn’t easy to yank out. The cord grips also take strain off the cord if it’s bent or pulled. Insulated with rubber and SOOW designated, these cords resist breaking down from oil, water, and chemicals. They won’t tear if dragged along the ground, and their outlet boxes won’t crack if dropped.

Cords with six outlets have an outlet box at the end.

Cords with seven outlets can be attached to another cord, so you can extend the length of your run.

Change the connection style between an outlet and your equipment.

NEMA 14-30 and NEMA 14-50 adapters are commonly used to charge electric vehicles.

Adapters with a power-indicating light have a light on the socket that illuminates when the adapter has power.

Use SJT adapters in dry or damp locations. STW and SJTW adapters have a water-resistant outer insulation. STOW and SJTOW adapters have an oil- and water-resistant outer insulation.

Power multiple devices from the same outlet with these splitters.

Two-outlet and three-outlet splitters plug into an outlet or extension cord. STOW splitters have an oil- and water-resistant insulation.

Provide power to multiple devices with these outlet strips. A circuit breaker prevents damage from current overload and short circuits.

The face of 360° outlets rotate a full circle.

Fasten mounting clips to a surface, and snap the channel on the back of outlet strips into the clips.

Keep personnel safe from electric shock with ground fault protection.

Flip-down covers protect outlets from dust when not in use.

Strips with an automatic reset immediately regain power after ground is established.

With a rubber housing, these outlet strips withstand drops and other impact.

Outlet strips with screw terminals allow you to attach your own power cord.

Install these extra-long strips onto the frame of an electrical cabinet. Screw the included mounting clips to the cabinet and snap the strips into the clips.

Bring power to workstations that are not near a wall—these poles mount from the ceiling. They are internally divided to accommodate power cable on one side and telephone and data cable on the other. Add phone jacks or RJ45 sockets to the knockouts to connect telephone and data cable, or run cable to equipment through the knockouts. Carpet/floor grippers hold fast on the flooring, so there’s no need to cut carpet or drill into the floor.

A ratchet holds the extension cord on these reels in place at any length; a quick pull releases the cord and the spring-driven winding mechanism retracts it. An adjustable ball lock controls how much cord retracts into the reel.

Reels with a swivel eye hook mount to the ceiling, so you can keep your cord on hand but out of the way.

Reels with a circuit breaker trip if there’s too much current to prevent overload damage.

Made of impact-resistant plastic, these reels are more durable than other automatic-wind cord reels. They have a ratchet to hold the extension cord in place at any length; a quick pull releases the cord and the spring-driven winding mechanism retracts it. A resettable circuit breaker prevents overload damage. Mount reels to a wall or ceiling with the quick-release mounting bracket. The included extension cord resists oil and water.

Intended to withstand demanding applications, these reels have a steel housing and an oil- and water-resistant extension cord. The automatic take-up feature maintains constant tension on the extension cord as the spring-driven winding mechanism retracts it. An adjustable ball lock controls how much cord retracts into the reel.

Reels with a swing out-mount bracket dispense cord at any angle.

Controlled winding prevents the cord from whipping at the end, making winding safer and extending the life of the cord and reel. These reels also have a ratchet to hold the extension cord in place at any length; a quick pull releases the cord and the spring-driven winding mechanism retracts it. An adjustable ball lock controls how much cord retracts into the reel. They have an adjustable arm so the cord can be accessed from any position around the reel.

Reels with a circuit breaker prevent overload damage.

These cord reels have a resettable circuit breaker to prevent overload damage. Connect an extension cord to the outlets on the reel.

Reels with NEMA 5-20 outlets have a power cord that connects directly to a power source. They have an adjustable brake to control tension during winding and stop the cord at the desired length.