Protect metal parts from corrosion. Also known as rust-inhibiting film, these coatings can be removed with a simple degreaser or mineral spirits.

These low-odor coatings form a waxy film similar to lube oil, so parts can remain coated for assembly. They can be removed with an alkaline cleaner.

Stick these adhesive-backed products inside electrical enclosures, tool boxes, and cabinets to coat metal components—they emit a corrosion-inhibiting vapor for up to two years.

Protect tools, dies, and other parts during shipping and storage with these durable peel-away coatings. They resist abrasion, moisture, and corrosion. Once removed, coatings can be melted again for repeat use.

These soft, pliable coatings add cushion and absorb shock. Use them to protect tools, dies, and other parts during shipping and storage. Once removed, coatings can be melted again for repeat use.

Tough and long-lasting, these flexible coatings protect against rust and corrosion.

Protect brass, bronze, copper, and silver from moisture, chemicals, oxidation, and abrasion.

Thicker than polyurethane and paint, these coatings have high moisture resistance and protect against abrasion and chemicals.

These two-part epoxy coatings resist chemicals and other solvents. They contain 316 stainless steel flakes, which provide durability and superior corrosion resistance.

Apply these coatings directly to rust to prevent it from spreading and to stop new rust from forming. Often used on containers, trailers, and in marine restoration, they create a durable, impact-resistant surface that permanently stops rust.

For use with steel and iron parts, these kits create a flat, black protective finish that resists corrosion and reduces glare. Use as an alternative to purchasing black-oxide tools.

Made with flakes of 316 stainless steel, these flexible silicone coatings have excellent durability and corrosion resistance. They withstand temperatures up to 1200° F for use on boilers, stacks, piping, and similar indoor applications.

Use these dyes after anodizing and before sealing to add a decorative appearance.

Use these dyes at the end of your zinc-plating process to add a decorative appearance.

More durable and scratch resistant than liquid paint, use this dry paint with your powder coating system.

Also known as brushable ceramic, these coatings create a hard, low-friction surface. They're often used on liquid processing equipment to protect worn areas and reduce turbulence.

Apply these coatings in temperatures down to 20° F, when other coatings would fail. They handle high humidity and have superior abrasion, impact, and UV resistance while providing great color and gloss retention.

These coatings are used in enclosed, high-traffic spaces. Thicker than polyurethane and paint, they protect against abrasion and resist moisture and chemicals.

Use these coatings on tanks to create a low-friction lining that prevents bubble formation and turbulence in the liquids within.

Keep working when temperatures drop—these coatings can be applied in temperatures down to 20° F, when other coatings would fail. Thicker than polyurethane and paint, they protect against abrasion and resist moisture and chemicals.

Made with Viton® fluoroelastomer, use these coatings to create a flexible coating on rollers, heavy equipment, and anything else that’s exposed to corrosive chemicals or extreme temperatures.

These coatings provide chemical, corrosion, and impact resistance on grit-blasted concrete and primed steel in immersion, underground, and waste-water treatment applications.

Also known as antifouling paint, the copper additive in these coatings prevents organic material, such as algae, barnacles, and slime from attaching to the surface. Use on boats, submerged structures, and inside tanks.

Able to withstand temperatures of up to 2500° F, these coatings absorb heat and release it later. Use them to improve the thermal efficiency of heaters, furnaces, and ovens to reduce energy costs. Also known as high-emissivity coatings.

Also known as coal tar epoxy, these coatings are our most resistant to abrasion, chemicals, and corrosion on concrete and steel. They can be immersed in salt water and fresh water.

Reflect at least 85% of the sun's rays to reduce cooling costs. These coatings also restore and reinforce your roof by filling cracks and forming a water-resistant seal.

These acid-free rust removers are safe for contact with people and surfaces.

Paint metal surfaces to stop rust from starting and prevent existing rust from spreading.

Prep, paint, and seal small scratches on metal surfaces with these pens.

This paint resists heat and automotive fluids for use on engines. Match the color to your manufacturers' equipment color.

Cover scratches and wear on storage racks and carts. Match the color to your manufacturers' equipment color.

Touch up scratches and wear on powder-coated metal without a primer. Choose the color that matches your equipment—this paint matches some of the most common colors used in powder-coating applications.

This acrylic-lacquer paint produces a thick, durable finish that won’t run or drip as it dries.

These primers stand up to marine exposure and salt spray. Use them to prepare your surface to extend the life of paint and coatings.

Protect steel and iron parts from corrosion without having to remove the primer before welding them together. Often used on structural steel in demanding environments, these primers can be welded through without affecting the weld’s integrity.

Get the power of a two-part epoxy primer in an easy-to-use aerosol can. These primers have excellent chemical and corrosion resistance. Spray them on uncoated or rusty metal to extend the life of paint and coatings.

A high concentration of zinc gives these primers excellent corrosion resistance for protecting steel—when exposed to moisture and chemicals, the zinc rusts before the underlying steel can. They’re often used with structural steel.

Use these primers on your surface before antislip coatings to maximize longevity.

Increase the wear resistance of thin floor coatings. These additives consist of an aluminum-oxide blend that improves abrasion resistance by up to 40%.

Fill cracks with these coatings to stop leaks and deaden sound.