Use ferrules to create a permanent connection between your air- and water-hose and barbed hose fittings.

Crimp these fittings to copper tubing with a crimping tool for a leak-tight connection that doesn’t require heat or soldering. They are comparable to Viega ProPress fittings.

Use these tools with a crimping ring (sold separately) to connect barbed tube fittings for drinking water to tubing.

Also known as ball-seat hose nipples, these fittings consist of a barbed shaft with a rounded end that sits inside a female threaded nut. When mated with a male threaded fitting, the rounded end presses tightly against the inside of the male threads for a better seal than a single-piece fitting. Once assembled, insert the barbed end into hose and secure with a clamp or a crimp-on hose ferrule.

Compatible with Schrader-shape plugs and sockets.

Compatible with Japanese-shape plugs and sockets.

With an unobstructed air path, these couplings have better airflow than other coupling shapes of the same size. Compatible with European-shape plugs and sockets.

Plugs and sockets are color coded by shape so you can't mix hose lines. Only plugs and sockets of the same color will fit together.

Also known as Thor couplings, these have two locking points to give you twice the gripping power of standard grip-lock couplings. They consist of a plug and a socket that connect with a quarter twist.

Fittings meet NSF/ANSI Standard 61 for drinking (potable) water.

Seal press-connect fittings onto steel and stainless steel pipe without threading or welding. Slide the tubing into a fitting and use these tools to crimp the connection.

The connection tab on these terminals is completely covered with insulation, leaving no metal exposed when mated. They are rated to 600 volts.

A plastic cover on the barrel provides electrical insulation.

The connection tab on these terminals is completely covered with insulation, leaving no metal exposed when mated.

The connection tab on these terminals is completely covered with insulation, leaving no metal exposed when mated.

A plastic cover on the barrel provides electrical insulation rated to 600 volts.

Rated UL 94 V-0 for flame resistance, these terminals are made of flame-retardant, self-extinguishing material to reduce the risk of fire.

The connection tab on these terminals is completely covered with insulation, leaving no metal exposed when mated.

These terminals withstand temperatures up to 900° F.

A plastic cover on the barrel provides electrical insulation.

A plastic cover on the barrel provides electrical insulation rated to 600 volts.

Mount these terminals on a threaded screw or stud for a more secure connection than spade and hook terminals.

The elongated ring can be mounted with a range of screw sizes. A plastic cover on the barrel provides electrical insulation rated to 600 volts.

A plastic cover on the barrel provides electrical insulation. These terminals can withstand temperatures up to 300°F.

A plastic cover on the barrel provides electrical insulation rated to 600 volts.

A plastic cover on the barrel provides electrical insulation rated to 600 volts.

When heat is applied, the enclosed solder melts, creating the most secure, electrically conductive, and environmentally sealed connection we offer.

Connect wire to a screw or stud at a right angle to fit connections into tight spaces.

Loosen your mounting screw to install—the open end eliminates the need to completely remove it.

When heat is applied, the enclosed solder melts and the insulation shrinks, creating the most secure, electrically conductive, and environmentally sealed connection we offer.

A plastic cover on the barrel provides electrical insulation rated to 600 volts.

Connect wire to a screw or stud at a right angle to fit connections into tight spaces.

A plastic cover provides electrical insulation.

A plastic cover on the barrel provides electrical insulation rated to 600 volts.

Maintain a supply of extra wire ferrules.

Thicker walls than standard battery terminal lugs make these more durable.

Connect these lugs to cable with a crimping tool or by soldering.

Solder these lugs in place, or use a crimping block and punch for the most secure connection of any of the welding lugs we offer.

Use these sleeves for non-lifting applications such as tethering, securing, and suspending.

These kits include two compression sleeves paired with two thimbles. The thimbles support the wire rope loops and prevent it from fraying.

Also known as socket-end swage fittings, install these eye-end fittings with a roller swage press for a strong, permanent hold.

Also known as socket-end swage fittings, install these stud-end fittings with a roller swage press for a strong, permanent hold.

Compress the thin shank wall with a hand tool to attach these light duty mounting-plate-end fittings. They are also known as hand swage fittings.

Compress the thin shank wall with a hand tool to attach these light duty clevis-end fittings. They are also known as hand swage fittings.

Compress sleeves with more force than hydraulic hand tools.

Permanently mount this press on a bench top.