Custom Shims | McMaster-Carr

Filter by

Shape

Material

System of Measurement

Thickness

Maximum Shim Size

Performance

Hardness

Export Control Classification Number (ECCN)

Specifications Met

Length

DFARS Specialty Metals

Compliant

Exempt

Certificate Type

Material Certificate with Traceable Lot Number

Material Certificate with Traceable Lot Number and Test Report

REACH

Compliant

RoHS

Compliant

Compliant with Exemptions

U.S.–Mexico–Canada Agreement (USMCA) Qualifying

Minimum Hardness

Wall Thickness

Magnetic Properties

May Be Mildly Magnetic

Sold As

Hole Size

Passivation

Temper Rating

Heat Treatment

Military Specification

396 Products

Made-to-Order Shims

Image of Product. Front orientation. Shims. Sold Individually, Made-to-Order.

If you need a unique shim shape or size, we’ll precision cut it for you. With thickness tolerances as fine as a strand of hair, these shims precisely align, space, and level components on shafts, arbors, and machinery.

You can stack multiple shims to achieve your exact thickness, but stacking more than four may cause them to shift. Remember, fewer shims are better, so a couple of thicker shims are more stable than a bunch of thin shims.

Send your dimensioned DWG, DXF, IGES, or STEP file to sales@mcmaster.com. Please leave at least _1/8" wall between shim edge and holes. Minimum hole size is _1/8". Shims should be no smaller than 1" × 1" square or 1" OD. Maximum shim dimension is the largest overall length, width, or diameter of your custom shim.

18-8 Stainless Steel—The choice for wet and outdoor environments, these shims resist rust. However, they’ll corrode or pit when exposed to salt water and chemicals.

Highly Corrosion-Resistant 316 Stainless Steel—Superior to 18-8 stainless steel, these shims won't degrade when exposed to harsh weather, salt water, and most chemicals.

Carbon Steel—Best for dry environments since moisture will cause these shims to rust.

Brass—With a warm, polished look, these shims are often chosen for their appearance. Similar to 18-8 stainless steel, brass is corrosion resistant enough to stand up to wet environments.

						2" × 2" Maximum Shim Size			5" × 5" Maximum Shim Size			7" × 7" Maximum Shim Size			11" × 11" Maximum Shim Size			23" × 23" Maximum Shim Size
	Thk.	Thk. Tolerance	Min. Hardness	Specs. Met	Mil. Spec.	Pkg. Qty.		Pkg.	Pkg. Qty.		Pkg.	Pkg. Qty.		Pkg.	Pkg. Qty.		Pkg.	Pkg. Qty.		Pkg.
18-8 Stainless Steel



		0.001"	-0.00005" to 0.00005"	Rockwell C42	ASTM A240	—	16	11885N172	000000	4	11885N187	000000	9	11885N203	0000000	4	11885N218	0000000	1	11885N234	0000000


		0.002"	-0.0001" to 0.0001"	Rockwell C42	ASTM A240	—	16	11885N173	00000	4	11885N188	00000	9	11885N204	000000	4	11885N219	000000	1	11885N235	000000
		0.003"	-0.00015" to 0.00015"	Rockwell C42	ASTM A240	—	16	11885N174	00000	4	11885N189	00000	9	11885N205	000000	4	11885N221	000000	1	11885N236	000000
		0.004"	-0.0002" to 0.0002"	Rockwell C42	ASTM A240	—	16	11885N175	00000	4	11885N191	00000	9	11885N206	000000	4	11885N222	000000	1	11885N237	000000
		0.005"	-0.00025" to 0.00025"	Rockwell C42	ASTM A240	—	16	11885N176	00000	4	11885N192	00000	9	11885N207	000000	4	11885N223	000000	1	11885N238	000000
		0.006"	-0.0003" to 0.0003"	Rockwell C42	ASTM A240	—	16	11885N177	00000	4	11885N193	00000	9	11885N208	000000	4	11885N224	000000	1	11885N239	000000
		0.007"	-0.00035" to 0.00035"	Rockwell C42	ASTM A240	—	16	11885N178	00000	4	11885N194	00000	9	11885N209	000000	4	11885N225	000000	1	11885N241	000000
		0.008"	-0.0004" to 0.0004"	Rockwell C42	ASTM A240	—	16	11885N179	00000	4	11885N195	00000	9	11885N211	000000	4	11885N226	000000	1	11885N242	000000
		0.009"	-0.00045" to 0.00045"	Rockwell C42	ASTM A240	—	16	11885N181	00000	4	11885N196	00000	9	11885N212	000000	4	11885N227	000000	1	11885N243	000000
		0.01"	-0.0005" to 0.0005"	Rockwell C42	ASTM A240	—	16	11885N182	00000	4	11885N197	00000	9	11885N213	000000	4	11885N228	000000	1	11885N244	000000
		0.015"	-0.00075" to 0.00075"	Rockwell C42	ASTM A240	—	16	11885N183	00000	4	11885N198	00000	9	11885N214	000000	4	11885N229	000000	1	11885N245	000000


		0.02"	-0.001" to 0.001"	Rockwell C42	ASTM A240	—	16	11885N184	00000	4	11885N199	00000	9	11885N215	000000	4	11885N231	000000	1	11885N246	000000
		0.025"	-0.00125" to 0.00125"	Rockwell C42	ASTM A240	—	16	11885N185	00000	4	11885N201	00000	9	11885N216	000000	4	11885N232	000000	1	11885N247	000000
		0.031"	-0.00155" to 0.00155"	Rockwell C42	ASTM A240	—	16	11885N186	00000	4	11885N202	00000	9	11885N217	000000	4	11885N233	000000	1	11885N248	000000


		Highly Corrosion-Resistant 316 Stainless Steel



				0.001"	-0.00005" to 0.00005"	Not Rated	ASTM A240	Fed. Spec. QQ-S-766	16	11885N101	00000	4	11885N116	00000	—	———	0	—	———	0	—	———	0


				0.002"	-0.0001" to 0.0001"	Not Rated	ASTM A240	Fed. Spec. QQ-S-766	16	11885N102	00000	4	11885N117	00000	9	11885N132	000000	4	11885N145	000000	1	11885N158	000000
				0.003"	-0.00015" to 0.00015"	Not Rated	ASTM A240	Fed. Spec. QQ-S-766	16	11885N103	00000	4	11885N118	00000	9	11885N133	000000	4	11885N146	000000	1	11885N159	000000
				0.004"	-0.0002" to 0.0002"	Not Rated	ASTM A240	Fed. Spec. QQ-S-766	16	11885N104	00000	4	11885N119	00000	9	11885N134	000000	4	11885N147	000000	1	11885N161	000000
				0.005"	-0.00025" to 0.00025"	Not Rated	ASTM A240	Fed. Spec. QQ-S-766	16	11885N105	00000	4	11885N121	00000	9	11885N135	000000	4	11885N148	000000	1	11885N162	000000
				0.006"	-0.0003" to 0.0003"	Not Rated	ASTM A240	Fed. Spec. QQ-S-766	16	11885N106	00000	4	11885N122	00000	9	11885N136	000000	4	11885N149	000000	1	11885N163	000000
				0.007"	-0.00035" to 0.00035"	Not Rated	ASTM A240	Fed. Spec. QQ-S-766	16	11885N107	00000	4	11885N123	00000	9	11885N137	000000	4	11885N151	000000	1	11885N164	000000
				0.008"	-0.0004" to 0.0004"	Not Rated	ASTM A240	Fed. Spec. QQ-S-766	16	11885N108	00000	4	11885N124	00000	9	11885N138	000000	4	11885N152	000000	1	11885N165	000000
				0.009"	-0.00045" to 0.00045"	Not Rated	ASTM A240	Fed. Spec. QQ-S-766	16	11885N109	00000	4	11885N125	00000	—	———	0	—	———	0	—	———	0
				0.01"	-0.0005" to 0.0005"	Not Rated	ASTM A240	Fed. Spec. QQ-S-766	16	11885N111	00000	4	11885N126	00000	9	11885N139	000000	4	11885N153	000000	1	11885N166	000000
				0.015"	-0.00075" to 0.00075"	Not Rated	ASTM A240	Fed. Spec. QQ-S-766	16	11885N112	00000	4	11885N127	00000	9	11885N141	000000	4	11885N154	000000	1	11885N167	000000


				0.02"	-0.001" to 0.001"	Not Rated	ASTM A240	Fed. Spec. QQ-S-766	16	11885N113	000000	4	11885N128	000000	9	11885N142	000000	4	11885N155	000000	1	11885N168	000000
				0.025"	-0.00125" to 0.00125"	Not Rated	ASTM A240	Fed. Spec. QQ-S-766	16	11885N114	00000	4	11885N129	00000	9	11885N143	000000	4	11885N156	000000	1	11885N169	000000
				0.031"	-0.00155" to 0.00155"	Not Rated	ASTM A240	Fed. Spec. QQ-S-766	16	11885N115	000000	4	11885N131	000000	9	11885N144	000000	4	11885N157	000000	1	11885N171	000000


				Carbon Steel



						0.001"	-0.00005" to 0.00005"	Rockwell B90	ASTM A109	Fed. Spec. QQ-S-698	16	11885N249	00000	4	11885N265	00000	—	———	0	—	———	0	—	———	0


						0.002"	-0.0001" to 0.0001"	Rockwell B90	ASTM A109	Fed. Spec. QQ-S-698	16	11885N251	00000	4	11885N266	00000	9	11885N281	000000	4	11885N295	000000	1	11885N309	000000
						0.003"	-0.00015" to 0.00015"	Rockwell B90	ASTM A109	Fed. Spec. QQ-S-698	16	11885N252	00000	4	11885N267	00000	9	11885N282	000000	4	11885N296	000000	1	11885N311	000000
						0.004"	-0.0002" to 0.0002"	Rockwell B90	ASTM A109	Fed. Spec. QQ-S-698	16	11885N253	00000	4	11885N268	00000	9	11885N283	000000	4	11885N297	000000	1	11885N312	000000
						0.005"	-0.00025" to 0.00025"	Rockwell B90	ASTM A109	Fed. Spec. QQ-S-698	16	11885N254	00000	4	11885N269	00000	9	11885N284	00000	4	11885N298	00000	1	11885N313	00000
						0.006"	-0.0003" to 0.0003"	Rockwell B90	ASTM A109	Fed. Spec. QQ-S-698	16	11885N255	00000	4	11885N271	00000	9	11885N285	00000	4	11885N299	00000	1	11885N314	00000
						0.007"	-0.00035" to 0.00035"	Rockwell B90	ASTM A109	Fed. Spec. QQ-S-698	16	11885N256	00000	4	11885N272	00000	9	11885N286	00000	4	11885N301	00000	1	11885N315	00000
						0.008"	-0.0004" to 0.0004"	Rockwell B90	ASTM A109	Fed. Spec. QQ-S-698	16	11885N257	00000	4	11885N273	00000	9	11885N287	00000	4	11885N302	00000	1	11885N316	00000
						0.009"	-0.00045" to 0.00045"	Rockwell B90	ASTM A109	Fed. Spec. QQ-S-698	16	11885N258	00000	4	11885N274	00000	9	11885N288	00000	4	11885N303	00000	1	11885N317	00000
						0.01"	-0.0005" to 0.0005"	Rockwell B90	ASTM A109	Fed. Spec. QQ-S-698	16	11885N259	00000	4	11885N275	00000	9	11885N289	00000	4	11885N304	00000	1	11885N318	00000
						0.015"	-0.00075" to 0.00075"	Rockwell B90	ASTM A109	Fed. Spec. QQ-S-698	16	11885N261	00000	4	11885N276	00000	9	11885N291	00000	4	11885N305	00000	1	11885N319	00000


0.02"	-0.001" to 0.001"					Rockwell B90	ASTM A109	Fed. Spec. QQ-S-698	16	11885N262	00000	4	11885N277	00000	9	11885N292	00000	4	11885N306	00000	1	11885N321	00000
0.025"	-0.00125" to 0.00125"					Rockwell B90	ASTM A109	Fed. Spec. QQ-S-698	16	11885N263	00000	4	11885N278	00000	9	11885N293	00000	4	11885N307	00000	1	11885N322	00000
0.031"	-0.00155" to 0.00155"					Rockwell B90	ASTM A109	Fed. Spec. QQ-S-698	16	11885N264	00000	4	11885N279	00000	9	11885N294	00000	4	11885N308	00000	1	11885N323	00000


Brass



						0.001"	-0.00005" to 0.00005"	Rockwell B60	ASTM B36	Fed. Spec. QQ-B-613	16	11885N324	00000	4	11885N334	00000	—	———	0	—	———	0	—	———	0


						0.002"	-0.0001" to 0.0001"	Rockwell B60	ASTM B36	Fed. Spec. QQ-B-613	16	11885N325	00000	4	11885N335	00000	9	11885N344	000000	4	11885N352	000000	1	11885N359	000000
						0.003"	-0.00015" to 0.00015"	Rockwell B60	ASTM B36	Fed. Spec. QQ-B-613	16	11885N326	00000	4	11885N336	00000	9	11885N345	000000	4	11885N353	000000	1	11885N361	000000
						0.004"	-0.0002" to 0.0002"	Rockwell B60	ASTM B36	Fed. Spec. QQ-B-613	16	11885N327	00000	4	11885N337	00000	—	———	0	—	———	0	—	———	0
						0.005"	-0.00025" to 0.00025"	Rockwell B60	ASTM B36	Fed. Spec. QQ-B-613	16	11885N328	00000	4	11885N338	00000	9	11885N346	000000	4	11885N354	000000	1	11885N362	000000
						0.01"	-0.0005" to 0.0005"	Rockwell B60	ASTM B36	Fed. Spec. QQ-B-613	16	11885N329	00000	4	11885N339	00000	9	11885N347	000000	4	11885N355	000000	1	11885N363	000000
						0.02"	-0.001" to 0.001"	Rockwell B60	ASTM B36	Fed. Spec. QQ-B-613	16	11885N331	00000	4	11885N341	00000	9	11885N348	000000	4	11885N356	000000	1	11885N364	000000
						0.025"	-0.00125" to 0.00125"	Rockwell B60	ASTM B36	Fed. Spec. QQ-B-613	16	11885N332	00000	4	11885N342	00000	9	11885N349	000000	4	11885N357	000000	1	11885N365	000000
						0.031"	-0.00155" to 0.00155"	Rockwell B60	ASTM B36	Fed. Spec. QQ-B-613	16	11885N333	00000	4	11885N343	00000	9	11885N351	000000	4	11885N358	000000	1	11885N366	000000

Peel-Away Multilayer Made-to-Order Shims

Image of Product. Front orientation. Shims. Multilayer, Sold Individually, Made-to-Order, Peel Away.

If you need a unique peel-away shim shape or size, we’ll precision cut it for you. Use these shims to fine-tune thickness without worrying about stacking multiple shims. They're made of metal layers bonded with adhesive—peel off the layers with a utility knife until you reach your desired thickness. To make peeling easier, warm the shims to soften the adhesive. With thickness tolerances as fine as a strand of hair, all of these shims precisely align, space, and level components on shafts, arbors, and machinery.

Send your dimensioned DWG, DXF, IGES, or STEP file to sales@mcmaster.com. Please leave at least _1/8" wall between shim edge and holes. Minimum hole size is _1/4". Shims should be no smaller than 1" × 1" square or 1" OD. Maximum shim dimension is the largest overall length, width, or diameter of your custom shim.

18-8 Stainless Steel—The choice for wet and outdoor environments, these shims resist rust. However, they’ll corrode or pit when exposed to salt water and chemicals.

Carbon Steel—Best for dry environments since moisture will cause these shims to rust.

Aluminum—These shims are an alternative to stainless steel for rust resistance but aren't as hard so they may not retain their shape as well. One-third the weight of steel, they’re commonly used in robotics and automation.

Brass—With a warm, polished look, these shims are often chosen for their appearance. Similar to 18-8 stainless steel, brass is corrosion resistant enough to stand up to wet environments.

								2" × 2" Maximum Shim Size			5" × 5" Maximum Shim Size			7" × 7" Maximum Shim Size			11" × 11" Maximum Shim Size			23" × 23" Maximum Shim Size
	Thk.	Thk. Tolerance	No. of Layers	Layer Thk.	Min. Hardness	Specs. Met	Mil. Spec.	Pkg. Qty.		Pkg.	Pkg. Qty.		Pkg.	Pkg. Qty.		Pkg.	Pkg. Qty.		Pkg.	Pkg. Qty.		Pkg.
18-8 Stainless Steel



		0.008"	-0.0004" to 0.0004"	4	0.002"	Rockwell B80	ASTM A240	—	16	11885N367	0000000	4	11885N374	0000000	9	11885N381	0000000	4	11885N387	0000000	1	11885N394	0000000


		0.016"	-0.0008" to 0.0008"	8	0.002"	Rockwell B80	ASTM A240	—	16	11885N368	000000	4	11885N375	000000	9	11885N382	000000	4	11885N388	000000	1	11885N395	000000
		0.032"	-0.0016" to 0.0016"	16	0.002"	Rockwell B80	ASTM A240	—	16	11885N369	000000	4	11885N376	000000	9	11885N383	000000	4	11885N389	000000	1	11885N396	000000
		0.048"	-0.0024" to 0.0024"	24	0.002"	Rockwell B80	ASTM A240	—	16	11885N371	000000	4	11885N377	000000	9	11885N384	000000	4	11885N391	000000	1	11885N397	000000
		0.062"	-0.0031" to 0.0031"	32	0.002"	Rockwell B80	ASTM A240	—	16	11885N372	000000	4	11885N378	000000	9	11885N385	000000	4	11885N392	000000	1	11885N398	000000
		0.124"	-0.0062" to 0.0062"	62	0.002"	Rockwell B80	ASTM A240	—	16	11885N373	000000	4	11885N379	000000	9	11885N386	00000000	4	11885N393	00000000	1	11885N399	00000000


		Carbon Steel



				0.008"	-0.0004" to 0.0004"	4	0.002"	Rockwell B54	—	Fed. Spec. QQ-S-698	16	11885N401	00000	4	11885N407	00000	9	11885N414	000000	4	11885N421	000000	1	11885N427	000000


				0.016"	-0.0008" to 0.0008"	8	0.002"	Rockwell B54	—	Fed. Spec. QQ-S-698	16	11885N402	00000	4	11885N408	00000	9	11885N415	000000	4	11885N422	000000	1	11885N428	000000
				0.032"	-0.0016" to 0.0016"	16	0.002"	Rockwell B54	—	Fed. Spec. QQ-S-698	16	11885N403	000000	4	11885N409	000000	9	11885N416	000000	4	11885N423	000000	1	11885N429	000000
				0.048"	-0.0024" to 0.0024"	24	0.002"	Rockwell B54	—	Fed. Spec. QQ-S-698	16	11885N404	000000	4	11885N411	000000	9	11885N417	000000	4	11885N424	000000	1	11885N431	000000
				0.062"	-0.0031" to 0.0031"	32	0.002"	Rockwell B54	—	Fed. Spec. QQ-S-698	16	11885N405	000000	4	11885N412	000000	9	11885N418	000000	4	11885N425	000000	1	11885N432	000000
				0.124"	-0.0062" to 0.0062"	62	0.002"	Rockwell B54	—	Fed. Spec. QQ-S-698	16	11885N406	000000	4	11885N413	000000	9	11885N419	000000	4	11885N426	000000	1	11885N433	000000


				Aluminum



						0.008"	-0.0004" to 0.0004"	4	0.002"	Not Rated	ASTM B209, SAE AMS-DTL-22499	—	16	11885N434	00000	4	11885N441	00000	9	11885N447	000000	4	11885N454	000000	1	11885N461	000000


						0.016"	-0.0008" to 0.0008"	8	0.002"	Not Rated	ASTM B209, SAE AMS-DTL-22499	—	16	11885N435	00000	4	11885N442	00000	9	11885N448	000000	4	11885N455	000000	1	11885N462	000000
						0.032"	-0.0016" to 0.0016"	16	0.002"	Not Rated	ASTM B209, SAE AMS-DTL-22499	—	16	11885N436	00000	4	11885N443	00000	9	11885N449	000000	4	11885N456	000000	1	11885N463	000000
						0.048"	-0.0024" to 0.0024"	24	0.002"	Not Rated	ASTM B209, SAE AMS-DTL-22499	—	16	11885N437	00000	4	11885N444	00000	9	11885N451	000000	4	11885N457	000000	1	11885N464	000000
						0.062"	-0.0031" to 0.0031"	32	0.002"	Not Rated	ASTM B209, SAE AMS-DTL-22499	—	16	11885N438	000000	4	11885N445	000000	9	11885N452	000000	4	11885N458	000000	1	11885N465	000000
						0.124"	-0.0062" to 0.0062"	62	0.002"	Not Rated	ASTM B209, SAE AMS-DTL-22499	—	16	11885N439	000000	4	11885N446	000000	9	11885N453	000000	4	11885N459	000000	1	11885N466	000000


						Brass



								0.008"	-0.0004" to 0.0004"	4	0.002"	Not Rated	ASTM B36	—	16	11885N467	000000	4	11885N474	000000	9	11885N481	000000	4	11885N487	000000	1	11885N494	000000


								0.016"	-0.0008" to 0.0008"	8	0.002"	Not Rated	ASTM B36	—	16	11885N468	000000	4	11885N475	000000	9	11885N482	000000	4	11885N488	000000	1	11885N495	000000
								0.032"	-0.0016" to 0.0016"	16	0.002"	Not Rated	ASTM B36	—	16	11885N469	000000	4	11885N476	000000	9	11885N483	000000	4	11885N489	000000	1	11885N496	000000
								0.048"	-0.0024" to 0.0024"	24	0.002"	Not Rated	ASTM B36	—	16	11885N471	000000	4	11885N477	000000	9	11885N484	000000	4	11885N491	000000	1	11885N497	000000
								0.062"	-0.0031" to 0.0031"	32	0.002"	Not Rated	ASTM B36	—	16	11885N472	000000	4	11885N478	000000	9	11885N485	000000	4	11885N492	000000	1	11885N498	000000
								0.124"	-0.0062" to 0.0062"	62	0.002"	Not Rated	ASTM B36	—	16	11885N473	000000	4	11885N479	000000	9	11885N486	00000000	4	11885N493	00000000	1	11885N499	00000000

Made-to-Order Unthreaded Spacers

When you need a custom spacer, we’ll get it made for you. Each one is built to your exact specifications, so you'll get the material, OD, length, and ID that's just right for your application.

18-8 Stainless Steel—The choice for wet and outdoor environments, these spacers resist rust. However, they won't hold up to the harsh chemicals that 316 stainless steel can.

Carbon Steel—Best for dry environments since moisture will cause these spacers to rust.

Lightweight 6061 Aluminum—One-third the weight of steel, these spacers are commonly used in applications that have weight limits. They're an alternative to stainless steel for rust resistance but are not as strong.

Brass—These conductive and nonmagnetic spacers won’t rust in wet environments.

Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.

						Each
	Choose an OD	Choose a Length	Choose an ID	Certificate Type		1-4	5-9	10-Up
18-8 Stainless Steel



		0.125" to 0.250"	0.125" to 2.000"	0.063" to 0.200"	Material Certificate	90018A112	000000	000000	000000


		0.251" to 0.500"	0.125" to 4.000"	0.125" to 0.440"	Material Certificate	90018A122	00000	00000	00000
		0.501" to 1.000"	0.125" to 5.000"	0.188" to 0.880"	Material Certificate	90018A132	00000	00000	00000
		1.001" to 1.500"	0.125" to 3.000"	0.250" to 1.340"	Material Certificate	90018A142	00000	00000	00000
		1.001" to 1.500"	3.001" to 6.000"	0.250" to 1.340"	Material Certificate	90018A152	000000	00000	00000
		1.501" to 2.000"	0.125" to 3.000"	0.375" to 1.750"	Material Certificate	90018A162	000000	00000	00000
		1.501" to 2.000"	3.001" to 6.000"	0.375" to 1.750"	Material Certificate	90018A172	000000	000000	00000
		2.001" to 3.000"	0.125" to 3.000"	0.625" to 2.625"	Material Certificate	90018A182	000000	000000	000000
		2.001" to 3.000"	3.001" to 6.000"	0.625" to 2.625"	Material Certificate	90018A192	000000	000000	000000


		Carbon Steel



				0.125" to 0.250"	0.125" to 2.000"	0.063" to 0.200"	Material Certificate	90018A113	00000	00000	00000


				0.251" to 0.500"	0.125" to 4.000"	0.125" to 0.440"	Material Certificate	90018A121	00000	00000	00000
				0.501" to 1.000"	0.125" to 5.000"	0.188" to 0.880"	Material Certificate	90018A131	00000	00000	00000
				1.001" to 1.500"	0.125" to 3.000"	0.250" to 1.340"	Material Certificate	90018A141	00000	00000	00000
				1.001" to 1.500"	3.001" to 6.000"	0.250" to 5.840"	Material Certificate	90018A151	000000	00000	00000
				1.501" to 2.000"	0.125" to 3.000"	0.375" to 1.625"	Material Certificate	90018A161	000000	00000	00000
				1.501" to 2.000"	3.001" to 6.000"	0.375" to 1.750"	Material Certificate	90018A171	000000	000000	00000
				2.001" to 3.000"	0.125" to 3.000"	0.625" to 2.625"	Material Certificate	90018A181	000000	000000	000000
				2.001" to 3.000"	3.001" to 6.000"	0.625" to 2.625"	Material Certificate	90018A191	000000	000000	000000


				Lightweight 6061 Aluminum



						0.125" to 0.250"	0.125" to 2.000"	0.063" to 0.200"	Material Certificate	90018A110	00000	00000	00000


						0.251" to 0.500"	0.125" to 4.000"	0.125" to 0.440"	Material Certificate	90018A120	00000	00000	00000
						0.501" to 1.000"	0.125" to 5.000"	0.188" to 0.880"	Material Certificate	90018A130	00000	00000	00000
						1.001" to 1.500"	0.125" to 3.000"	0.250" to 1.340"	Material Certificate	90018A140	00000	00000	00000
						1.001" to 1.500"	3.001" to 6.000"	0.250" to 1.340"	Material Certificate	90018A150	000000	00000	00000
						1.501" to 2.000"	0.125" to 3.000"	0.375" to 1.750"	Material Certificate	90018A160	000000	00000	00000
						1.501" to 2.000"	3.001" to 6.000"	0.375" to 1.750"	Material Certificate	90018A170	000000	000000	00000
						2.001" to 3.000"	0.125" to 3.000"	0.625" to 2.625"	Material Certificate	90018A180	000000	000000	000000
						2.001" to 3.000"	3.001" to 6.000"	0.625" to 2.625"	Material Certificate	90018A190	000000	000000	000000


						Brass



								0.125" to 0.250"	0.125" to 2.000"	0.063" to 0.200"	Material Certificate	90018A114	00000	00000	00000


								0.251" to 0.500"	0.125" to 4.000"	0.125" to 0.440"	Material Certificate	90018A123	00000	00000	00000
								0.501" to 1.000"	0.125" to 5.000"	0.188" to 0.812"	Material Certificate	90018A133	00000	00000	00000
								1.001" to 1.500"	0.125" to 3.000"	0.250" to 1.250"	Material Certificate	90018A143	00000	00000	00000
								1.001" to 1.500"	3.001" to 6.000"	0.250" to 1.340"	Material Certificate	90018A153	000000	00000	00000
								1.501" to 2.000"	0.125" to 3.000"	0.375" to 1.750"	Material Certificate	90018A163	000000	00000	00000
								1.501" to 2.000"	3.001" to 6.000"	0.375" to 1.750"	Material Certificate	90018A173	000000	000000	00000
								2.001" to 3.000"	0.125" to 3.000"	0.625" to 2.625"	Material Certificate	90018A183	000000	000000	000000
2.001" to 3.000"								3.001" to 6.000"	0.625" to 2.625"	Material Certificate	90018A193	000000	000000	000000