Dead Blow Hammers | McMaster-Carr

Filter by

Hammer Type

Head Weight

Face Color

Face Diameter

Overall Length

Face Shape

Face Material

Grip Style

Face Hardness Rating

Handle Material

Head Material

Handle Color

Face Mount Type

Material

Color

Length

Face Replaceable

DFARS Specialty Metals

REACH

RoHS

Handle Replaceable

Export Control Classification Number (ECCN)

Face Texture

Face Thread Size

Performance

Face Thread Type

130 Products

High-Visibility Dead Blow Mallets

A fluorescent orange color makes these mallets easy to see. The head is loaded with metal shot for added weight and a controlled impact with minimal rebound. All are suitable for driving chisels and striking work without damaging its surface. Choose a lighter weight mallet for tapping work into place and driving a chisel to make small cuts. Use heavier weight mallets when assembling joints, dislodging stuck parts, and making aggressive cuts with a chisel. Longer mallets allow for more powerful swings. A textured grip provides slip resistance.

Polyurethane Rubber Face

Image of Product. Front orientation. Hammers. High-Visibility Dead Blow Mallets .

Polyurethane rubber faces resist oils and solvents and won't crack under high impact. They're softer than metal faces, so they're good for striking plastic, wood, and sheet metal.

Soft Face—Soft faces have a hardness similar to that of a tire tread.

Medium Face—Medium faces have a hardness that's suitable for most general purpose applications.

Face Hardness Rating—All have a face hardness rating for comparing their hardness with other plastic faces.

	Face Dia.	Face Hardness Rating (Face Color)	Overall Lg.	Head Material	Handle Color	Handle Replaceable		Each
Polyurethane Rubber Handle with Steel Core—Textured Grip



	5 oz.	7/8"	Medium (Fluorescent Orange)	9 1/2"	Polyurethane Rubber	Fluorescent Orange	No	0000000	000000


	10 oz.	1 1/4"	Soft (Fluorescent Orange)	10 1/4"	Polyurethane Rubber	Fluorescent Orange	No	0000000	00000
	14 oz.	1 1/4"	Medium (Fluorescent Orange)	10 1/2"	Polyurethane Rubber	Fluorescent Orange	No	0000000	00000
	15 oz.	1 1/4"	Soft (Fluorescent Orange)	10 1/2"	Polyurethane Rubber	Fluorescent Orange	No	0000000	00000
	1 1/8 lb.	1 1/2"	Medium (Fluorescent Orange)	12 1/4"	Polyurethane Rubber	Fluorescent Orange	No	0000000	00000
	1 1/8 lb.	1 5/8"	Soft (Fluorescent Orange)	11 1/4"	Polyurethane Rubber	Fluorescent Orange	No	0000000	00000
	1 5/16 lb.	1 1/2"	Medium (Fluorescent Orange)	13"	Polyurethane Rubber	Fluorescent Orange	No	0000000	00000
	1 3/8 lb.	1 1/2"	Soft (Fluorescent Orange)	11 3/4"	Polyurethane Rubber	Fluorescent Orange	No	0000000	00000
	1 3/4 lb.	2"	Soft (Fluorescent Orange)	12 7/8"	Polyurethane Rubber	Fluorescent Orange	No	0000000	00000
	2 5/8 lb.	2 1/8"	Soft (Fluorescent Orange)	14 1/4"	Polyurethane Rubber	Fluorescent Orange	No	0000000	00000
	3 1/4 lb.	2 1/2"	Soft (Fluorescent Orange)	15 1/4"	Polyurethane Rubber	Fluorescent Orange	No	0000000	00000


	5 lb.	2 7/8"	Soft (Fluorescent Orange)	19 3/4"	Polyurethane Rubber	Fluorescent Orange	No	0000000	000000

Round Brass Face

Brass faces are suitable for striking steel, iron, and stone.

	Face Dia.	Overall Lg.	Head Material	Handle Color	Handle Replaceable		Each
Polyurethane Rubber Handle with Steel Core—Textured Grip



	1 1/2	1 3/4" 1 1/4"	13"	Polyurethane Rubber	Fluorescent Orange	No	0000000	000000

Dead Blow Mallets

The head on these mallets is loaded with metal shot for added weight and a controlled impact with minimal rebound. Use them to drive chisels and strike work without damaging its surface. To avoid marring, choose a mallet with a face that's softer than your workpiece. Lighter weight mallets are good for tapping work into place and driving a chisel to make small cuts. Use heavier weight mallets when assembling joints, dislodging stuck parts, and making aggressive cuts with a chisel. Longer mallets allow for more powerful swings. All have a textured or ribbed grip for slip resistance.

Round PVC Face

Fiberglass Handle with

Ribbed Grip

Textured Grip

PVC faces are softer than metal faces, so they're good for striking plastic, wood, and sheet metal.

PVC Handle—PVC handles with steel core resist breakage if you miss your mark.

Fiberglass Handle—Fiberglass handles combine high strength with good vibration resistance.

Soft Face—Soft faces have a hardness similar to that of a tire tread.

Hard Face—Hard faces have a hardness similar to that of a bowling ball.

Face Hardness Rating—All have a face hardness rating for comparing their hardness with other plastic faces.

	Face Dia.	Face Hardness Rating (Face Color)	Overall Lg.	Head Material	Handle Color	Handle Replaceable		Each
PVC Handle with Steel Handle Core—Textured Grip



	8 oz.	1 5/8"	Soft (Black)	10 3/4"	PVC	Black	No	0000000	000000


	1 lb.	1 3/4"	Soft (Black)	12"	PVC	Black	No	0000000	00000
	1 1/2 lb.	1 7/8"	Soft (Black)	13"	PVC	Black	No	0000000	00000
	2 lb.	2 1/8"	Soft (Black)	13 1/2"	PVC	Black	No	0000000	00000
	3 lb.	2 7/8"	Soft (Black)	14"	PVC	Black	No	0000000	00000
	4 lb.	2 5/8"	Soft (Black)	14 3/4"	PVC	Black	No	0000000	00000


	Fiberglass Handle with Ribbed Grip



			2 lb.	2"	Hard (Black)	14"	PVC	Black	No	0000000	00000


			2 3/4 lb.	2 3/8"	Hard (Black)	14 1/4"	PVC	Black	No	0000000	00000
			3 3/8 lb.	2 5/8"	Hard (Black)	15 1/4"	PVC	Black	No	0000000	00000

Replaceable-Face Dead Blow Mallets

The replaceable faces can be changed out when worn. These mallets have a head loaded with metal shot for added weight and a controlled impact with minimal rebound. Use them to drive chisels and strike work without damaging its surface. The polyurethane rubber faces resist oils and solvents and won't crack under high impact; they're often used on plastic, wood, and sheet metal. To avoid marring when tapping or striking, choose a face that's softer than your workpiece. Lighter weight mallets are good for tapping work into place and driving a chisel to make small cuts. Use heavier weight mallets when assembling joints, dislodging stuck parts, and making aggressive cuts with a chisel. Longer mallets allow for more powerful swings. The handle has a ribbed grip for slip resistance.

Rectangular Press-Fit Polyurethane Rubber Face

Steel Handle—Steel handles are stronger than wooden handles but have less vibration resistance.

Medium Face—Medium faces have a hardness that's suitable for most general purpose applications.

	Face Lg.	Face Wd.	Face Hardness Rating (Face Color)	Overall Lg.	Head Material	Handle Replaceable		Each
Steel Handle—Ribbed Grip



	1	1 3/16"	1 9/16"	Medium (Yellow)	11 3/4"	Steel	No	0000000	000000

Polyurethane Rubber Faces

			Medium Hard (Off-White)
Press-Fit Polyurethane Rubber Faces


1 3/16"	1 9/16"	0000000	00000

Round Screw-In Polyurethane Rubber Face

Hickory Handle—Hickory handles resist vibration.

Medium Face—Medium faces have a hardness that's suitable for most general purpose applications.

Extra-Hard Face—Extra-hard faces have a hardness similar to that of a hard hat.

				Face
	Head Wt.	Face Dia.	Face Hardness Rating (Face Color)	Thread Size	Thread Type	Overall Lg.	Head Material	Handle Replaceable		Each
Hickory Handle—Ribbed Grip



		10 oz.	1"	Medium (Green) × Extra Hard (Black)	1/4"-20	UNC	11"	Aluminum	Yes	0000000	000000


		14 oz.	1"	Medium (Green) × Extra Hard (Black)	1/4"-20	UNC	11"	Iron	Yes	0000000	00000
		14 oz.	1 1/4"	Medium (Green) × Extra Hard (Black)	5/16"-18	UNC	12"	Aluminum	Yes	0000000	00000
		1 3/8 lb.	1 1/4"	Medium (Green) × Extra Hard (Black)	5/16"-18	UNC	12"	Iron	Yes	0000000	00000
		1 3/8 lb.	1 1/2"	Medium (Green) × Extra Hard (Black)	5/16"-18	UNC	13"	Aluminum	Yes	0000000	00000
		1 7/8 lb.	1 1/2"	Medium (Green) × Extra Hard (Black)	5/16"-18	UNC	13"	Iron	Yes	0000000	00000
		2 3/8 lb.	2"	Medium (Green) × Extra Hard (Black)	3/8"-16	UNC	15"	Aluminum	Yes	0000000	000000
		3 1/2 lb.	2"	Medium (Green) × Extra Hard (Black)	3/8"-16	UNC	15"	Iron	Yes	0000000	000000
		4 1/8 lb.	2 1/2"	Medium (Green) × Extra Hard (Black)	7/16"-14	UNC	17"	Aluminum	Yes	0000000	000000
		6 1/2 lb.	2 1/2"	Medium (Green) × Extra Hard (Black)	7/16"-14	UNC	17"	Iron	Yes	0000000	000000

Polyurethane Rubber Faces

Image of Product. Front orientation. Hammer Faces. Replaceable-Face Dead Blow Mallets , Polyurethane Rubber Face.

Soft Face—Soft faces have a hardness similar to that of a tire tread.

Medium Face—Medium faces have a hardness that's suitable for most general purpose applications.

Hard Face—Hard faces have a hardness similar to that of a bowling ball.

Extra-Hard Face—Extra-hard faces have a hardness similar to that of a hard hat.

		Face		Soft (Orange)		Medium (Green)		Hard (Red)		Extra Hard (Black)
	Face Dia.	Thread Size	Thread Type		Each		Each		Each		Each
Screw-In Polyurethane Rubber Faces



		1"	1/4"-20	UNC	0000000	000000	0000000	000000	0000000	000000	0000000	000000


		1 1/4"	5/16"-18	UNC	0000000	00000	0000000	00000	0000000	00000	0000000	00000
		1 1/2"	5/16"-18	UNC	0000000	00000	0000000	00000	0000000	00000	0000000	00000
		2"	3/8"-16	UNC	0000000	00000	0000000	00000	0000000	00000	0000000	00000
		2 1/2"	7/16"-14	UNC	0000000	00000	0000000	00000	0000000	00000	0000000	00000

Dead Blow Sledge Hammers

These hammers have a head loaded with metal shot for added weight and a controlled impact with minimal rebound. A fluorescent orange color makes them easy to see. Use them to demolish material, form metal, and drive punches, chisels, and masonry drills. All have a long handle and heavy head to deliver a powerful strike. Made from polyurethane rubber, the faces resist oil and solvents and won't crack under high impact. The hardness of the faces is similar to that of a tire tread.

Polyurethane Rubber Face

Image of Product. Front orientation. Hammers. Dead Blow Sledge Hammers .

	Face Dia.	Face Hardness Rating (Face Color)	Overall Lg.	Head Material	Handle Color	Handle Replaceable		Each
Polyurethane Rubber Handle with Steel Core—Textured Grip



	10 1/2	3 3/8"	Soft (Fluorescent Orange)	30"	Polyurethane Rubber	Fluorescent Orange	No	0000000	0000000


	11 1/2	3 3/8"	Soft (Fluorescent Orange)	36 1/4"	Polyurethane Rubber	Fluorescent Orange	No	0000000	000000

Dead Blow Ball Peen Hammers

These hammers have a head loaded with metal shot for added weight and a controlled impact with minimal rebound. Their fluorescent color makes them easy to see. Use the domed end of the head for forming soft metal, rounding off edges, and closing rivets. The flat striking face is for driving nails, pins, punches, and chisels. A textured grip provides slip resistance.

Round Steel Face

Image of Product. Front orientation. Hammers. Dead Blow Ball Peen Hammers .

	Face Dia.	Overall Lg.	Head Material	Handle Color	Handle Replaceable		Each
Polyurethane Rubber Handle with Steel Core—Textured Grip



	32	1 3/4"	13 3/4"	Polyurethane Rubber	Fluorescent Orange	No	0000000	000000

High-Visibility Replaceable-Face Dead Blow Mallets

Change the faces out when worn rather than replacing the entire tool. A fluorescent orange color makes these mallets easy to see. All have a head loaded with metal shot for added weight and a controlled impact with minimal rebound. Use them to drive chisels and strike work without damaging its surface. Often used on plastic, wood, and sheet metal, the polyurethane rubber faces resist oils and solvents and won't crack under high impact. The medium-hard face has a hardness similar to that of a plastic cutting board; the extra-hard face has a hardness similar to that of a hard hat. Use a face that's softer than your workpiece to avoid marring. Lighter weight mallets are good for tapping work into place and driving a chisel to make small cuts. Choose heavier weight mallets for assembling joints, dislodging stuck parts, and making aggressive cuts with a chisel. Longer mallets allow for more powerful swings. A textured grip provides slip resistance.

Round Screw-In Polyurethane Rubber Face

				Face
	Head Wt.	Face Dia.	Face Hardness Rating (Face Color)	Pipe Size	Thread Type	Overall Lg.	Head Material	Handle Color	Handle Replaceable		Each
Polyurethane Rubber Handle with Steel Core—Textured Grip



		12 oz.	1 3/8"	Medium Hard (Red) × Extra Hard (Black)	3/4	NPT	10"	Polyurethane Rubber	Fluorescent Orange	No	0000000	000000


		1 1/2 lb.	1 3/4"	Medium Hard (Red) × Extra Hard (Black)	1	NPT	11"	Polyurethane Rubber	Fluorescent Orange	No	0000000	00000
		2 lb.	1 7/8"	Medium Hard (Red) × Extra Hard (Black)	1	NPT	11 3/4"	Polyurethane Rubber	Fluorescent Orange	No	0000000	00000
		3 lb.	2 1/2"	Medium Hard (Red) × Extra Hard (Black)	1 1/4	NPT	13 3/4"	Polyurethane Rubber	Fluorescent Orange	No	0000000	00000
		4 1/2 lb.	2 7/8"	Medium Hard (Red) × Extra Hard (Black)	1 1/2	NPT	14 3/4"	Polyurethane Rubber	Fluorescent Orange	No	0000000	000000
		7 lb.	2 7/8"	Medium Hard (Red) × Extra Hard (Black)	1 1/2	NPT	19 1/4"	Polyurethane Rubber	Fluorescent Orange	No	0000000	000000

Polyurethane Rubber Faces

Image of Product. Front orientation. Hammer Faces. High-Visibility Replaceable-Face Dead Blow Mallets , Polyurethane Rubber Face.

Extra-Soft Face—Extra-soft faces have a hardness similar to that of a pencil eraser.

Soft Face—Soft faces have a hardness similar to that of a tire tread.

Medium Face—Medium faces have a hardness that's suitable for most general purpose applications.

Medium-Hard Face—Medium-hard faces have a hardness similar to that of a plastic cutting board.

Hard Face—Hard faces have a hardness similar to that of a bowling ball.

Extra-Hard Face—Extra-hard faces have a hardness similar to that of a hard hat.

		Face		Extra Soft (Clear)		Soft (Blue)		Medium (Green)		Medium Hard (Red)		Hard (Amber)		Extra Hard (Black)
	Face Dia.	Pipe Size	Thread Type		Each		Each		Each		Each		Each		Each
Screw-In Polyurethane Rubber Faces



		1 3/8"	3/4	NPT	00000000	000000	00000000	000000	00000000	000000	00000000	000000	00000000	000000	00000000	000000


		1 3/4"	1	NPT	00000000	00000	00000000	00000	00000000	00000	00000000	00000	00000000	00000	00000000	00000
		1 7/8"	1	NPT	00000000	00000	00000000	00000	00000000	00000	00000000	00000	00000000	00000	00000000	00000
		2 1/2"	1 1/4	NPT	00000000	00000	00000000	00000	00000000	00000	00000000	00000	00000000	00000	00000000	00000
		2 7/8"	1 1/2	NPT	00000000	00000	00000000	00000	00000000	00000	00000000	00000	00000000	00000	00000000	00000

Mallets

Drive chisels and strike work without damaging its surface. To avoid marring, choose a mallet with faces that are softer than your workpiece. Lighter weight mallets are good for tapping work into place and driving a chisel to make small cuts. Use heavier weight mallets when assembling joints, dislodging stuck parts, and making aggressive cuts with a chisel. Longer mallets allow for more powerful swings.

Brass Face

Style M

Brass faces are suitable for striking steel, iron, and stone.

Aluminum Handle—Aluminum handles are stronger than hickory handles but have less vibration resistance.

Textured Grip—Textured grips provide slip resistance.

	Head Wt., lb.	Face Dia.	Overall Lg.	Grip Style	Handle Replaceable		Each
Aluminum Handle



	M	2	1 1/2"	10 1/2"	Textured	No	000000	000000

Screw-In Hammer Faces

These faces have screw threads to attach to the head of your hammer or mallet. Replace existing faces or switch to a face with a different hardness.

PVC


	Screw-In Face

PVC faces are softer than metal faces, so they're good for sheet metal work.

Extra-Soft Face—Extra-soft faces have a hardness similar to that of a pencil eraser.

Soft Face—Soft faces have a hardness similar to that of a tire tread.

Medium-Soft Face—Medium-soft faces have a hardness similar to that of a shoe heel.

Medium Face—Medium faces have a hardness that's suitable for most general purpose applications.

Medium-Hard Face—Medium-hard faces have a hardness similar to that of a plastic cutting board.

Hard Face—Hard faces have a hardness similar to that of a bowling ball.

Extra-Hard Face—Extra-hard faces have a hardness similar to that of a hard hat.

Face Hardness Rating—All have a face hardness rating for comparing their hardness with other rubber and plastic faces.

	Face		Extra-Soft Face			Soft Face			Medium-Soft Face			Medium Face			Medium-Hard Face			Hard Face			Extra-Hard Face
Face Dia.	Thread Size	Thread Type	Face Color		Each	Face Color		Each	Face Color		Each	Face Color		Each	Face Color		Each	Face Color		Each	Face Color		Each
1"	1/4"-20	UNC	—	———	0	—	———	0	Red	0000000	00000	Green	0000000	00000	Off-White	0000000	00000	Black	0000000	00000	Yellow	0000000	00000
1 1/2"	5/16"-18	UNC	Gray	0000000	000000	Brown	0000000	00000	Red	0000000	0000	Green	0000000	0000	Off-White	0000000	00000	Black	0000000	00000	Yellow	0000000	00000
2"	3/8"-16	UNC	Gray	0000000	00000	Brown	0000000	00000	Red	0000000	00000	Green	0000000	00000	Off-White	0000000	00000	Black	0000000	00000	Yellow	0000000	00000
3"	1/2"-13	UNC	—	———	0	—	———	0	Red	0000000	00000	Green	0000000	00000	—	———	0	Black	0000000	00000	—	———	0

Polyurethane Rubber


	Screw-In Face

Polyurethane rubber faces are softer than metal faces, so they're good for sheet metal work.

Soft Face—Soft faces have a hardness similar to that of a tire tread.

Medium Face—Medium faces have a hardness that's suitable for most general purpose applications.

Hard Face—Hard faces have a hardness similar to that of a bowling ball.

Extra-Hard Face—Extra-hard faces have a hardness similar to that of a hard hat.

Face Hardness Rating—All have a face hardness rating for comparing their hardness with other rubber and plastic faces.

	Face		Soft Face			Medium Face			Hard Face			Extra-Hard Face
Face Dia.	Thread Size	Thread Type	Face Color		Each	Face Color		Each	Face Color		Each	Face Color		Each
1"	1/4"-20	UNC	Orange	0000000	000000	Green	0000000	000000	Red	0000000	000000	Black	0000000	000000
2 1/2"	7/16"-14	UNC	Orange	0000000	00000	Green	0000000	00000	Red	0000000	00000	Black	0000000	00000
3"	1/2"-13	UNC	Orange	0000000	00000	Green	0000000	00000	Red	0000000	00000	Black	0000000	00000

Replaceable-Face Dead Blow Sledge Hammers

Change out the faces when they become worn. The head on these hammers is loaded with metal shot for added weight and a controlled impact with minimal rebound. Use them to demolish material, form metal, and drive punches, chisels, and masonry drills. For demolition work, choose a hammer with a face that's harder than your workpiece. Longer and heavier hammers deliver greater impact.

Screw-In Polyurethane Rubber Faces

Image of Product. Front orientation. Hammers. Replaceable-Face Dead Blow Sledge Hammers , Round Face, Screw-In Face.

Screw-in hammers have polyurethane rubber faces that resist oils and solvents and won't crack under high impact. Each face can be switched out for a face with a different hardness. The medium face has a hardness that's suitable for most general purpose applications. The extra-hard face has a hardness similar to that of a hard hat.

				Face
	Head Wt., lb.	Face Dia.	Face Hardness Rating (Face Color)	Thread Size	Thread Type	Overall Lg.	Head Material	Handle Replaceable		Each
Hickory Handle with Plain Grip



		7 1/2	2 1/2"	Medium (Green) × Extra Hard (Black)	7/16"-14	UNC	32"	Iron	Yes	000000	0000000


		7 1/2	3"	Medium (Green) × Extra Hard (Black)	1/2"-13	UNC	35"	Aluminum	Yes	000000	000000
		11 1/2	3"	Medium (Green) × Extra Hard (Black)	1/2"-13	UNC	35"	Iron	Yes	000000	000000

Polyurethane Rubber Faces

Polyurethane

Rubber Face

Soft Face—Soft faces have a hardness similar to that of a tire tread.

Medium Face—Medium faces have a hardness that's suitable for most general purpose applications.

Hard Face—Hard faces have a hardness similar to that of a bowling ball.

Extra-Hard Face—Extra-hard faces have a hardness similar to that of a hard hat.

		Face		Soft (Orange)		Medium (Green)		Hard (Red)		Extra Hard (Black)
	Face Dia.	Thread Size	Thread Type		Each		Each		Each		Each
Screw-In Polyurethane Rubber Faces



		2 1/2"	7/16"-14	UNC	0000000	000000	0000000	000000	0000000	000000	0000000	000000


		3"	1/2"-13	UNC	0000000	00000	0000000	00000	0000000	00000	0000000	00000

Press-Fit Nylon Face

Press-fit hammers have nylon plastic faces with a hardness similar to that of a bowling ball.

	Face Dia.	Face Hardness Rating (Face Color)	Overall Lg.	Head Material	Handle Replaceable		Each
Hickory Handle with Plain Grip



	13 1/4	4"	Hard (White)	39 1/4"	Steel	Yes	0000000	0000000


	19 3/4	4"	Hard (White)	39 1/4"	Steel	Yes	0000000	000000

Nylon Faces

		Hard Face (White)
Press-Fit Nylon Faces


4"	0000000	000000

Ball Peen Hammers

Use the domed end of the head for forming soft metal, rounding off edges, and closing rivets. The flat striking face is for driving nails, pins, punches, and chisels. For replacement handles, see Hickory Hammer Handles and Fiberglass Hammer Handles.

Round Steel Face

Hickory Handle with Plain

Grip

Hickory Handle—Hickory handles resist vibration.

	Face Dia.	Overall Lg.	Head Material	Handle Replaceable		Each
Hickory Handle with Plain Grip



	32	1 1/2"	15 3/4"	Steel	Yes	0000000	000000


	48	1 3/4"	16"	Steel	Yes	0000000	00000

Nail Hammers

Textured Grip

Dead-Blow Hammer


Serrated Face	Straight Claw

Magnetic Nail Starter

Drive nails with the flat, steel face and remove them with the claw on the other end of the head.

For replacement handles, see Hickory Hammer Handles.

Aluminum Handle—Aluminum handles are stronger than hickory handles but have less vibration resistance.

Textured Grip—Textured grips provide slip resistance.

Dead-Blow Hammer—Dead blow nail hammers have a head loaded with metal shot for a controlled impact and minimal rebound. The handle is lightweight to provide a fast swing while driving nails.

Serrated Face—Serrated face prevents the head from slipping when striking.

Straight Claw—Straight-claw hammers are also known as framing hammers. They're a good choice for ripping and prying wood in addition to nail removal, but they do not remove nails as efficiently as curved-claw hammers.

Magnetic Nail Starter—Hammers with a magnetic nail starter hold nails in position at the top of the head, so a free hand is not needed to steady the nail before striking it.

		Face					Straight Claw
	Head Wt., oz.	Dia.	Material	Overall Lg.	Handle Replaceable	Features		Each
Aluminum Handle—Textured Grip Dead Blow







				Smooth Face

				14	1 1/2"	Steel	16"	No	Magnetic Nail Starter	0000000	0000000




						Serrated Face

						14	1 1/2"	Steel	16"	No	Magnetic Nail Starter	0000000	000000