These sets come with a handle and multiple blades. Switch them out to suit your application.

Use with blades that have a 0.1" shank and trade numbers with a prefix of B.

These sets include four handles and four blades.

These sets include four handles and four blades.

Carry these slim-handled tools comfortably in your pocket.

These blades hold up against repeated use better than standard deburring blades.

These blades are titanium nitride (TiN) coated for wear resistance.

Also known as machinist's scrapers, these tools remove material and smooth edges on a workpiece.

A clamp lets you change the length of the blade.

Place the tool over your tube and twist to deburr.

These drill attachments scrape both the inner and outer edges of plastic pipe and tube to finish them for connections.

A titanium aluminum nitride (TiAlN) coating provides heat and wear resistance for longer life.

Reach around barriers to cut, grind, shape, and remove sharp edges in hard-to-access spots.

Diamond-cut teeth effectively cut hard materials.

Power troublesome burrs off of thin-wall (EMT) conduit and attach fittings in less time than traditional hand tools. These bits have a 1/4" hex shank that fits quick-change drill chucks and power screwdrivers to quickly deburr the inside and outside edges of conduit in a single step.

Extend your reach with these 6 1/4" to 7" long burs.

The abrasive grains in these bits are blended with rubber, which cushions during grinding to produce a smoother surface texture than other bits with similar grits.

Bits thread onto mounted shanks so you can quickly switch head shapes without removing the shank. The abrasive grains are blended with rubber, which cushions during grinding to produce a smoother surface texture than other bits with similar grits.

Set contains a selection of our most popular hex-shank grinding bits. Use them in any drill chuck that accepts a 1/4" hex shank.

Set contains an assortment of tools for grinding, sanding, and cutting on small surface areas.

Each set contains a selection of our most popular grinding bits.

Similar to diamond, boron nitride is harder than aluminum oxide and lasts longer. Bits are also known as jig grinding pins and mandrels.

Almost as hard as diamond, these tungsten carbide bits cut through nonmetals without generating heat.

Grind, sand, finish, and polish with these versatile kits.

This 360° shield closes automatically.

The bendable shaft with handpiece lets these grinders operate smoothly with less vibration, noise, and heat than other hand-held grinders.

Use these grinders for light, intermittent grinding, deburring, and finishing.

High-quality bearings ensure long spindle life, even when grinders are used continuously.

Kit includes a light duty grinder and an assortment of tools for occasional grinding, deburring, and finishing.

With high-quality bearings and collets for long spindle life, these grinders are rated for continuous use to take on tough jobs.

A large grinding surface, combined with a thick layer of rough abrasive removes more material than other wheels. They are also known as Type 11 wheels, flared-cup wheels, snagging wheels, and cup stones.

Wheels are a blend of aluminum oxide and zirconia alumina, which removes more material and lasts three times as long as our General Purpose Grinding Wheels. They are also known as Type 27 wheels, raised-hub wheels, and grinding discs.

Bonded without any wax or rubber filler, these wheels resist material buildup. They are also known as Type 27 wheels, raised-hub wheels, and grinding discs.

A blend of ceramic alumina and zirconia alumina removes material at a 50% faster rate than our Long-Life Grinding Wheels. Wheels are also known as Type 27 wheels, raised-hub wheels, and grinding discs.

The absence of iron, sulfur, and chlorine in these wheels means they won’t corrode or discolor stainless steel. They are also known as INOX wheels, Type 27 wheels, raised-hub wheels, and grinding discs.

Wheels have a large surface area and a thick layer of rough abrasive for heavy material removal on concrete and stone. They are also known as Type 11 wheels, flared-cup wheels, snagging wheels, and cup stones.

Designed to stand up to heavy use, these wheels remove more material than our general purpose grinding wheels.

The silicon carbide abrasive in these wheels is suspended in rubber for a cushioned grind with light material removal.

A more durable abrasive allows these wheels to remove more material and last longer than Norton General Purpose Grinding Wheels. They are also known as Type 1 wheels and straight wheels.

Unlike aluminum oxide wheels, these silicon carbide wheels won’t clog when grinding soft metals.

The special shapes of these wheels provide more clearance than typical straight wheels.

A combination of cotton laminate and aluminum oxide abrasive creates a smoother surface than other grinding wheels with similar grits.

Thinner than standard diamond files, these are good for reaching into small slots and narrow spaces.

The wood handle provides a comfortable grip.

Flex these files to access hard-to-reach spots.

Good for filing holes and concave surfaces.

Use on concave, convex, and flat surfaces.

The plastic handle provides a comfortable grip.

Good for filing holes and concave surfaces.

Made to exacting measurements to ensure smoothness, these files are used for finishing delicate and intricate parts. Also known as Swiss-pattern files.

No need for a separate handle—these files have one built in.

An insulated handle protects against shock from accidental contact with live electrical circuits. These files are tested to 1,000 volts to meet ASTM F1505.

An insulated handle protects against shock from accidental contact with live electrical circuits. These tools are tested to 1,000 volts to meet ASTM F1505.

Remove material quickly. Also known as American-pattern and machinists’ files.

Remove material quickly. Also known as American-pattern and machinists’ files.

Made to exacting measurements to ensure smoothness, these files are used for finishing delicate and intricate parts. Also known as Swiss-pattern files.

File slots, keyways, grooves, and corners with these four-sided tools.

Bend and twist these files to clean contacts in hard-to-reach spots.

Remove material quickly. Also known as American-pattern and machinists’ files.

Made to exacting measurements to ensure smoothness, these files are used for finishing delicate and intricate parts. Also known as Swiss-pattern files.

Made to exacting measurements to ensure smoothness, these files are used for finishing delicate and intricate parts. Also known as Swiss-pattern files.

Remove material quickly. Also known as American-pattern and machinists’ files.

The most common shape, use these for general purpose filing.

Use on concave, convex, and flat surfaces.

These files are for infrequent use.

The small tip allows precise work in tight spots.

Reach into the smallest holes, grooves, and slots to perform detailed work.

Wire-thin and easy to bend, these files reach tight spots in delicate workpieces, yet they're strong enough to shape hard metal, such as titanium.

Use these extremely hard, long-lasting file sets to remove hard materials from small holes, grooves, and slots.

These file sets last 100 times longer than standard files. Small tips allow you to work in small spaces.

Polish, clean, and debur deep inside tubes and cylinders.

A coating prevents dust and debris from building up on the abrasive surface.

Evenly sand two surfaces at once.

Sized for tight spaces, these small pads sand flat and curved surfaces. They have a flexible foam layer that gives you more control over sanding pressure, creating finer and more consistent finishes.