Filter by
Formulation
Manufacturer
For Use On
System of Measurement
Manufacturer Model Name
Consistency
Cure Type
Manufacturer Model Number
Adhesive Type
RoHS
DFARS Specialty Metals
Export Control Classification Number (ECCN)
Quick-Set Epoxy Structural Adhesives
 |  |  |
Bottle | Cartridge | Syringe |
For quick repairs, these epoxies begin to harden in six minutes or less. Epoxies are the strongest and most chemical-resistant structural adhesives. They bond especially well on metal.
These adhesives come in two parts that need to be mixed. The container size listed is the combined total of the two parts.
Cartridge—To mix and dispense these adhesives, you'll need a mixer nozzle and dispensing gun.
Gel—Stick in place and keep their exact shape with no flowing or sagging.
Thick Liquid—Flow into narrower gaps than gels and pastes, but thick enough to stay put on uneven surfaces.
Container | Strength | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Mfr. Model No. | Size, fl. oz. | Type | Begins to Harden | Reaches Full Strength, hr. | Shear, psi | Peel, lbf/in. wd. | Mix Ratio | Consistency | Viscosity, cP | Temp. Range, ° F | For Joining | Each | |||
Devcon | |||||||||||||||
1 Minute Epoxy | |||||||||||||||
| 14277 | 1.69 | Cartridge | 60 sec. | 2 | 1,600 | 2 | 1:1 | Gel | 70,000 | -40 to 200 | Masonry, Metal, Plastic, Wood | 66215A32 | 000000 | ||
5 Minute Epoxy | |||||||||||||||
| 14200 | 15 | Bottle | 5 min. | 12 | 1,900 | 2 | 1:1 | Thick Liquid | 10,000 | -40 to 200 | Masonry, Metal, Plastic, Wood | 7524A4 | 00000 | ||
| 14240 | 0.84 | Syringe | 5 min. | 48 | 2,500 | 2 | 1:1 | Gel | Not Rated | -40 to 200 | Masonry, Metal, Plastic, Wood | 7592A31 | 00000 | ||
| 14250 | 0.84 | Syringe | 5 min. | 12 | 1,900 | 2 | 1:1 | Thick Liquid | 10,000 | -40 to 200 | Masonry, Metal, Plastic, Wood | 7541A76 | 00000 | ||
| 14265 | 1.69 | Cartridge | 5 min. | 48 | 2,500 | 2 | 1:1 | Gel | Not Rated | -40 to 200 | Masonry, Metal, Plastic, Wood | 66215A23 | 00000 | ||
| 14270 | 1.69 | Cartridge | 5 min. | 12 | 1,900 | 2 | 1:1 | Thick Liquid | 10,000 | -40 to 200 | Masonry, Metal, Plastic, Wood | 66215A31 | 00000 | ||
Epoxy Structural Adhesives
| |
Cartridge | Syringe |
Epoxies are the strongest and most chemical-resistant structural adhesives. They bond especially well on metal.
These adhesives come in two parts that need to be mixed. The container size listed is the combined total of the two parts.
7524A161 is solvent free. If the adhesive hardens in the tube, soften in warm water before dispensing.
Cartridge—To mix and dispense these adhesives, you'll need a mixer nozzle and dispensing gun.
Paste—Thicker than liquid adhesives but still spreadable—good for filling gaps and covering surfaces.
Thick Liquid—Flow into narrower gaps than gels and pastes, but thick enough to stay put on uneven surfaces.
Container | Strength | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Mfr. Model No. | Size, fl. oz. | Type | Begins to Harden, min. | Reaches Full Strength | Shear, psi | Peel, lbf/in. wd. | Mix Ratio | Consistency | Viscosity, cP | Temp. Range, ° F | For Joining | Each | |||
Devcon | |||||||||||||||
2 Ton Epoxy | |||||||||||||||
| 14260 | 1.69 | Cartridge | 8 | 16 hr. | 2,250 | 2 | 1:1 | Thick Liquid | 8,000 | -40 to 200 | Composite, Metal, Plastic, Metal to Composite, Metal to Plastic, Plastic to Composite | 66215A24 | 000000 | ||
| 14310 | 0.84 | Syringe | 8 | 16 hr. | 2,250 | 2 | 1:1 | Thick Liquid | 8,000 | -40 to 200 | Composite, Metal, Plastic, Metal to Composite, Metal to Plastic, Plastic to Composite | 7541A77 | 00000 | ||
10 Minute Epoxy | |||||||||||||||
| 14251 | 1.69 | Cartridge | 10 | 90 min. | 2,400 | 20 | 1:1 | Thick Liquid | 80,000 | -65 to 200 | Masonry, Metal, Plastic, Wood | 66215A53 | 00000 | ||
| 14255 | 1.69 | Cartridge | 10 | 90 min. | 2,400 | 20 | 1:1 | Paste | 90,000 | -65 to 200 | Masonry, Metal, Plastic, Wood | 66215A54 | 00000 | ||
Epoxy Structural Adhesives for Harsh Environments
|
Cartridge |
With excellent resistance to corrosive chemicals, these epoxies maintain bonds in tough conditions.
Epoxies are the strongest and most chemical-resistant structural adhesives. They bond especially well on metal. Choose an adhesive that hardens quickly for fast repairs, or one that hardens slowly to allow more time for positioning.
These adhesives come in two parts that need to be mixed. The container size listed is the combined total of the two parts.
Model Number 14415—Resist acids and oils.
Cartridge—To mix and dispense these adhesives, you'll need a mixer nozzle and dispensing gun.
Paste—Thicker than liquid adhesives but still spreadable—good for filling gaps and covering surfaces.
Mfr. Model | Container | Strength | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Name | No. | Size, fl. oz. | Type | Begins to Harden, min. | Reaches Full Strength, day | Shear, psi | Peel, lbf/in. wd. | Mix Ratio | Consistency | Viscosity, cP | Temp. Range, ° F | Environment | For Joining | Each | |||
Devcon | |||||||||||||||||
| HP 250 | 14415 | 13.5 | Cartridge | 65 | 7 | 3,200 | 35 | 2:1 | Paste | 105,000 | -65 to 250 | Corrosive, Harsh | Composite, Masonry, Metal, Plastic, Wood | 66215A35 | 0000000 | ||
Waterproof Epoxy Structural Adhesives
 |
Pail |
Even when used underwater, these adhesives maintain their strength. Epoxies are the strongest and most chemical-resistant adhesives. They bond especially well on metal.
These epoxies come in two parts that need to be mixed. The container size listed is the combined total of the two parts.
Putty—Slice off a chunk and mold it into the shape you need.
Mfr. Model No. | Container Type | Begins to Harden, min. | Reaches Full Strength, hr. | Shear Strength, psi | Mix Ratio | Consistency | Viscosity | Temp. Range, ° F | For Joining | Each | |||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Devcon | |||||||||||||
| 11801 | Pail | 45 | 24 | 2,600 | 1:1 | Putty | Not Rated | 40 to 250 | Composite, Metal, Plastic | 7605A211 | 0000000 | ||
Surface Fillers for Metal
 |  |
Epoxy Tube | Jar, Can |
Mix these two-part surface fillers together to repair leaks and cracks as well as to rebuild rough spots in metal. The size listed is the combined total of the two parts.
Devcon Plastic Steel surface fillers can repair areas where brazing and welding is impractical.
NSF/ANSI 61—NSF/ANSI 61 surface fillers meet safety standards for use with drinking water.
Container | Temp. Range, ° F | ||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Mfr. Model No. | Size, fl. oz. | Net Wt., lb. | Type | Begins to Harden, min. | Reaches Full Strength, hr. | Consistency | Mixing Req. | Mix Ratio | Approx. Coverage @ Thk. | Max. Thk. | For Use Outdoors | Min. | Max. | Color | Food Industry Std. | Process After Hardening | For Use On | Each | |||
Devcon Plastic Steel® Liquid | |||||||||||||||||||||
| 10210 | — | 1 | Jar, Can | 45 | 16 | Thick Liquid | Yes | 9:1 | 50 in² @ 1/4" | 3/4" | Yes | -40 | 250 | Dark Gray | — | Machine, Drill, Sand, Saw, Tap | Aluminum, Brass, Copper, Stainless Steel, Cast Iron | 74575A83 | 000000 | ||
| 10220 | — | 4 | Jar, Can | 45 | 16 | Thick Liquid | Yes | 9:1 | 200 in² @ 1/4" | 3/4" | Yes | -40 | 250 | Dark Gray | — | Machine, Drill, Sand, Saw, Tap | Aluminum, Brass, Copper, Stainless Steel, Cast Iron | 74575A84 | 000000 | ||
Devcon Plastic Steel® Epoxy | |||||||||||||||||||||
| 52345 | 2 | — | Tube | 60 | 24 | Thick Liquid | Yes | 1:1 | 14 in² @ 1/4" | 1/4" | Yes | -40 | 200 | Dark Gray | — | Machine, Drill, Sand, Saw, Tap | Aluminum, Brass, Copper, Stainless Steel, Cast Iron | 74575A85 | 0000 | ||
Devcon Plastic Steel® Putty | |||||||||||||||||||||
| 10110 | — | 1 | Jar, Can | 45 | 16 | Putty | Yes | 9:1 | 40 in² @ 1/4" | 3/4" | Yes | -40 | 250 | Gray | — | Machine, Drill, Sand, Saw, Tap | Aluminum, Brass, Copper, Stainless Steel, Cast Iron | 74575A81 | 00000 | ||
| 10120 | — | 4 | Jar, Can | 45 | 16 | Putty | Yes | 9:1 | 190 in² @ 1/4" | 3/4" | Yes | -40 | 250 | Gray | — | Machine, Drill, Sand, Saw, Tap | Aluminum, Brass, Copper, Stainless Steel, Cast Iron | 74575A82 | 000000 | ||
Devcon Plastic Steel® 5 Minute Putty | |||||||||||||||||||||
| 10240 | — | 1 | Jar, Can | 5 | 16 | Putty | Yes | 1.7:1 | 40 in² @ 1/4" | 3/4" | Yes | -40 | 200 | Dark Gray | — | Machine, Drill, Sand, Saw, Tap | Aluminum, Brass, Copper, Stainless Steel, Cast Iron | 74575A63 | 000000 | ||
Devcon Bronze Putty | |||||||||||||||||||||
| 10260 | — | 1 | Jar, Can | 35 | 16 | Putty | Yes | 9:1 | 50 in² @ 1/4" | 3/4" | Yes | -40 | 250 | Bronze | — | Machine, Drill, Sand, Saw, Tap | Brass, Bronze | 74575A64 | 000000 | ||
Devcon Stainless Steel Putty | |||||||||||||||||||||
| 10270 | — | 1 | Jar, Can | 60 | 16 | Putty | Yes | 11:1 | 50 in² @ 1/4" | 3/4" | Yes | -40 | 250 | Dark Gray | NSF/ANSI 61 | Machine, Drill, Sand, Saw, Tap | Stainless Steel | 74575A69 | 000000 | ||
Devcon FasMetal™ Putty | |||||||||||||||||||||
| 10780 | — | 0.75 | Jar, Can | 4 | 16 | Putty | Yes | 1:1 | 60 in² @ 1/4" | 3/4" | Yes | -40 | 250 | Gray | — | Machine, Drill, Sand, Saw, Tap | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Titanium | 74575A76 | 000000 | ||
Impact-Resistant Epoxy Structural Adhesives
|
Cartridge |
Mixed with rubber for resilient bonds that withstand sudden stress, shock, and vibration better than standard epoxies. Epoxies are the strongest and most chemical-resistant adhesives. They bond especially well on metal.
These adhesives come in two parts that need to be mixed. The container size listed is the combined total of the two parts.
Cartridge—To mix and dispense these adhesives, you'll need a mixer nozzle and dispensing gun.
Thick Liquid—Flow into narrower gaps than gels and pastes, but thick enough to stay put on uneven surfaces.
Container | Strength | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Mfr. Model No. | Size, fl. oz. | Type | Begins to Harden, min. | Reaches Full Strength, hr. | Shear, psi | Peel, lbf/in. wd. | Mix Ratio | Consistency | Viscosity, cP | Temp. Range, ° F | For Joining | Each | |||
Devcon | |||||||||||||||
Epoxy Plus 25 | |||||||||||||||
| 14278 | 1.69 | Cartridge | 25 | 30 | 2,750 | 20 | 1:1 | Thick Liquid | 70,000 | -40 to 200 | Composite, Masonry, Metal, Plastic, Wood | 66215A25 | 000000 | ||
Surface Fillers
 |
Epoxy Jar |
These surface fillers can be used on vertical surfaces without sagging. They repair cracked, worn, and damaged surfaces. The size listed is the combined total of the two parts.
Aluminum Liquid and Aluminum Putty—Devcon Aluminum Liquid and Devcon Aluminum Putty form a nonrusting finish.
Container | Temp. Range, ° F | ||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Mfr. Model No. | Net Wt., lb. | Type | Begins to Harden, min. | Reaches Full Strength, hr. | Consistency | Mixing Req. | Mix Ratio | Approx. Coverage @ Thk. | Max. Thk. | For Use Outdoors | Min. | Max. | Color | Process After Hardening | For Use On | Each | |||
Devcon Aluminum Liquid | |||||||||||||||||||
| 10710 | 1 | Jar | 75 | 16 | Thick Liquid | Yes | 9:1 | 70 in² @ 1/4" | 3/4" | Yes | -40 | 250 | Aluminum | Machine, Drill, Sand, Saw, Tap | Aluminum, Steel, Stainless Steel, Ceramic, Concrete, Fiberglass, Wood | 74575A74 | 0000000 | ||
| 10720 | 3 | Jar | 75 | 16 | Thick Liquid | Yes | 9:1 | 210 in² @ 1/4" | 3/4" | Yes | -40 | 250 | Aluminum | Machine, Drill, Sand, Saw, Tap | Aluminum, Steel, Stainless Steel, Ceramic, Concrete, Fiberglass, Wood | 74575A75 | 000000 | ||
Devcon Aluminum Putty | |||||||||||||||||||
| 10610 | 1 | Jar | 60 | 16 | Putty | Yes | 9:1 | 70 in² @ 1/4" | 3/4" | Yes | -40 | 250 | Aluminum | Machine, Drill, Sand, Saw, Tap | Aluminum, Steel, Stainless Steel, Ceramic, Concrete, Fiberglass, Wood | 74575A72 | 000000 | ||
| 10620 | 3 | Jar | 60 | 16 | Putty | Yes | 9:1 | 210 in² @ 1/4" | 3/4" | Yes | -40 | 250 | Aluminum | Machine, Drill, Sand, Saw, Tap | Aluminum, Steel, Stainless Steel, Ceramic, Concrete, Fiberglass, Wood | 74575A73 | 000000 | ||
Surface Filler Patches
 |
Knead the epoxy-coated patch and resin together to make repairs to pipes, tanks, drums, and containers in the field.
Temp. Range, ° F | ||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Mfr. Model No. | Container Type | Lg. | Wd. | Begins to Harden, min. | Reaches Full Strength, hr. | Mixing Req. | For Use Outdoors | Min. | Max. | Color | Process After Hardening | For Use On | Each | |||
Devcon Zip Patch™ | ||||||||||||||||
| 11500 | Patch | 4" | 9" | 5 | 4 | No | Yes | -40 | 200 | Brown | Machine, Drill, Sand, Saw, Tap | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Cast Iron, Titanium, ABS, CPVC, PETG, Polycarbonate, Polyimide, Polystyrene, Polyurethane Rubber, PVC, PVDF, Ceramic, Fiberglass, Wood | 7790A21 | 0000000 | ||
Chemical-Resistant Surface Fillers for Metal
 |
Epoxy Jar |
Chemicals will not affect these two-part epoxies. They repair cracked, worn, and damaged surfaces. The size listed is the combined total of the two parts.
Container | Temp. Range, ° F | ||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Mfr. Model No. | Net Wt., lb. | Type | Begins to Harden, min. | Reaches Full Strength, hr. | Consistency | Mixing Req. | Mix Ratio | Approx. Coverage @ Thk. | Max. Thk. | For Use Outdoors | Min. | Max. | Color | Process After Hardening | For Use On | Each | |||
Devcon Titanium Putty | |||||||||||||||||||
| 10760 | 1 | Jar | 20 | 16 | Putty | Yes | 4.3:1 | 40 in² @ 1/4" | 3/4" | Yes | -40 | 350 | Gray | Machine, Drill, Sand, Saw, Tap | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Titanium | 74575A7 | 0000000 | ||
| 10770 | 2 | Jar | 20 | 16 | Putty | Yes | 4.3:1 | 90 in² @ 1/4" | 3/4" | Yes | -40 | 350 | Gray | Machine, Drill, Sand, Saw, Tap | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Titanium | 74575A71 | 000000 | ||
