Cut wood, plywood, and particleboard.

Square-shaped teeth cut across the grain and with the grain (ripping) in reclaimed lumber and flooring with embedded nails.

A razor-sharp knife edge minimizes dust and makes quick, clean cuts through foam sheets such as expanded polystyrene insulation and extruded polystyrene.

A continuous edge on these blades produces smooth cuts.

A continuous edge on these blades produces smooth cuts. It's coated in diamond grit to cut hard, abrasive materials such as masonry, stone, asphalt, and concrete.

Make fast, clean cuts in steel sheets, angle iron, rebar, and pipe with the carbide teeth on these blades.

Cut wood, plywood, and particleboard.

Use with water or coolant to produce smoother cuts in tile than dry-cutting blades. They're also for use on glass.

A continuous edge on these blades produces smooth cuts.

The edge of the blade is segmented to cut faster than a continuous edge.

Diamond grit bonded to a segmented edge cuts through hard metal such as cast iron.

The segmented edge on these blades is coated with diamond grit for cutting plastic.

These blades have a higher concentration of diamonds than other dry-cutting blades, so they last up to three times longer.

Use these blades with water or coolant to produce a smooth cut and minimize heat buildup

Blades are stainless steel with a diamond-grit edge that cuts hard, abrasive materials such as carbon fiber, ceramics, masonry, glass, composites, quartz, and silicon.

These steel wheels have a diamond grit edge, so they last longer than standard bench-grinder cutoff wheels when cutting hard, nonferrous materials such as carbide, ceramics, and glass.

These steel wheels have a diamond grit edge for making cuts in abrasive materials such as ceramic and tile.

The diamond-grit edge on these hole saws cuts more accurately, leaves a smoother finish, and lasts up to twice as long as carbide-grit-coated teeth.