Die Sets

	Thread Type Thread Type

	System of Measurement System of Measurement

Inch

Metric

	Thread Size Thread Size

	Thread Pitch Thread Pitch

	For Use On For Use On

	Component Component

Die

Tap

	Shape Shape


Hex	Round

	Width Width

	Number of Pieces Number of Pieces

4
5
6
7
8
10
12
13

15
16
18
19
20
24
25
40

50
53
58
63
65
117

	Thread Direction Thread Direction

Right Hand

Left Hand

	Material Material

Steel

High-Speed Steel

	Chamfer Type Chamfer Type

Plug

Taper

	Container Type Container Type

	Number of Taps Number of Taps

	Number of Dies Number of Dies

	Pipe Size Pipe Size

	Application Application

Through-Hole Threading

Closed-End Hole Threading

	RoHS (Restriction of Hazardous Substances) RoHS (Restriction of Hazardous Substances)

RoHS Compliant

	Finish Finish

Uncoated

Black Oxide

	REACH (Registration, Evaluation, Authorization and Restriction of Chemicals) REACH (Registration, Evaluation, Authorization and Restriction of Chemicals)

REACH Compliant

	File Sizes Included File Sizes Included

For 0.8 to 3 mm thread
pitches

For 11 to 24 threads per inch

For 9 to 32 threads per inch

	DFARS (Defense Acquisition Regulations Supplement) DFARS (Defense Acquisition Regulations Supplement)

DFARS Specialty Metals
COTS-Exempt

	Length Length

66 Products

Die Sets for Presses

Use in assembly operations and light stamping work. They work with manual, powered, and hydraulic presses.

For technical drawings and 3-D models, click on a part number.

Lg.	Wd.	Clearance	Ht.	Material		Each
2 7/8"	3 1/2"	2"	3 1/2"	Steel	0000000	0000000
3 3/4"	5"	3 1/4"	5"	Steel	0000000	000000
4 3/8"	6 1/2"	2 5/8"	5"	Steel	0000000	000000
5"	8 1/2"	3 3/4"	6 3/4"	Steel	0000000	000000
6"	9 1/2"	3 3/4"	6 3/4"	Steel	0000000	000000
7"	10 3/8"	3 3/4"	6 3/4"	Steel	0000000	000000

Heavy Duty Die Sets for Presses

Hot-rolled steel press plates and hardened steel bushings give these die sets the strength to handle punching and metal forming applications. Use them with manual, powered, and hydraulic presses.

For technical drawings and 3-D models, click on a part number.

				Mounting Slots
Lg.	Wd.	Clearance	Ht.	No. of	Wd.	Material		Each
6 9/16"	6 3/4"	3 3/8"	6"	2	3/4"	Steel	0000000	0000000
6 3/4"	8"	3 3/8"	6"	2	3/4"	Steel	0000000	000000
7 3/4"	8"	3 1/4"	6"	2	3/4"	Steel	0000000	000000
10 3/4"	12"	3 1/4"	6"	2	3/4"	Steel	0000000	00000000

Quick-Setup Die Sets for Presses

These dies have a plate on top of the upper die and a 1/2"-13 tool adapter that connects the die and ram for quick setup. Use them with manual, powered, and hydraulic presses for assembly operations and light stamping work.

For technical drawings and 3-D models, click on a part number.

					Tool Adapter
Lg.	Wd.	Clearance	Ht.	Material	Lg.	Thread Size	Features		Each
2 7/8"	3 1/2"	2"	3 1/2"	Steel	4 1/2"	1/2"-13	Ram Attachment	0000000	0000000
3 3/4"	5"	3 1/4"	5"	Steel	4 1/2"	1/2"-13	Ram Attachment	0000000	000000
4 3/8"	6 1/2"	2 5/8"	5"	Steel	4 1/2"	1/2"-13	Ram Attachment	0000000	000000
5"	8 1/2"	3 3/4"	6 3/4"	Steel	4 1/2"	1/2"-13	Ram Attachment	0000000	000000
6"	9 1/2"	3 3/4"	6 3/4"	Steel	4 1/2"	1/2"-13	Ram Attachment	0000000	000000
7"	10 3/8"	3 3/4"	6 3/4"	Steel	4 1/2"	1/2"-13	Ram Attachment	0000000	000000

Sheet Metal Hole Flaring Dies

10 Pieces

16 Pieces

Flared Hole

Create flares around already-cut holes in sheet metal up to 3/16" thick to make the edges stronger and more rigid. Also known as dimple dies. Press a male and female die together using a hydraulic press. When you don’t have access to a hydraulic press or your material won’t fit in a press, bolt the dies together. For making multiple flares quickly, use a hydraulic knockout punch driver. Dies are made of hardened steel for strength and durability.

For Use On Aluminum, Brass, Copper, Stainless Steel, Steel
No. of Pieces	Includes	For Hole Dia.	OD	For Max. Steel Thick.	For Pipe Size		Each
10	5 Male Dies and 5 Female Dies	1 1/8", 1 3/8", 1 5/8", 1 7/8", 2 3/8"	2 3/8", 2 3/4", 3 1/4", 3 3/8", 4 1/4"	3/16"	3/4, 1, 1 1/4, 1 1/2, 2	0000000	0000000
16	8 Male Dies and 8 Female Dies	1/2", 3/4", 1", 1 1/4", 1 1/2", 1 3/4", 2", 2 1/2"	1 1/4", 1 1/2", 2", 2 3/8", 2 3/4", 3 1/8", 3 3/8", 4 1/4"	3/16"	__	0000000	000000

Tap and Die Sets

Use a single set for many sizes of internal and external threads. The taps and dies are for use on most metal and plastic.

Round dies are for cutting threads. Use them with wrenches for round dies. Hex-shaped dies are for thread repair and can be used with conventional wrenches.

Carbon steel taps are for thread repair and occasional tapping.

High-speed steel taps and dies last longer than carbon steel when used on similar material.

Taper-chamfer taps have 7-10 chamfered threads at the tip for cutting into the workpiece. They require less torque than other chamfer types, making them a good choice for starting threads and tapping through holes. However, a longer taper means that they cannot thread as close to the bottom of closed-end holes

Plug-chamfer taps are a versatile choice for most tapping applications. With 3-5 chamfered cutting threads, they require moderate torque and are often used for start-to-finish tapping of through holes and closed-end holes. However, they do not start threads as easily as taper-chamfer taps. When using them to tap closed-end holes, be sure to leave sufficient space at the bottom for chips to accumulate.

Carbon Steel
No. of Pieces	Tap Sizes Included	Tap Chamfer Type	Die Shape	Die Sizes Included	Wd.	Container Type	Includes		Each
Right-Hand Thread
12	1/8, 1/4, 3/8, 1/2, 3/4, and 1	Taper	Hex	1/8, 1/4, 3/8, 1/2, 3/4, and 1	1 1/16", 1 1/4", 1 7/16", 1 5/8", 2", 2 3/8"	Plastic Case	__	0000000	0000000
24	1/8"-27, 1/4"-20, 1/4"-28, 5/16"-18, 5/16"-24, 3/8"-16, 3/8"-24, 7/16"-14, 7/16"-20, 1/2"-13, and 1/2"-20	Plug, Taper	Hex	1/8"-27, 1/4"-20, 1/4"-28, 5/16"-18, 5/16"-24, 3/8"-16, 3/8"-24, 7/16"-14, 7/16"-20, 1/2"-13, and 1/2"-20	1"	Plastic Case	Die Wrench, Tap Wrench	000000	000000
24	1/8"-28, M3 × 0.50 mm, M4 × 0.70 mm, M5 × 0.80 mm, M6 × 1.00 mm, M7 × 1.00 mm, M8 × 1.25 mm, M9 × 1.25 mm, M10 × 1.50 mm, M12 × 1.50 mm, and M12 × 1.75 mm	Plug, Taper	Hex	1/8"-28, M3 × 0.50 mm, M4 × 0.70 mm, M5 × 0.80 mm, M6 × 1.00 mm, M7 × 1.00 mm, M8 × 1.25 mm, M9 × 1.25 mm, M10 × 1.50 mm, M12 × 1.50 mm, and M12 × 1.75 mm	1"	Plastic Case	Die Wrench, Tap Wrench	00000000	00000
25	M14 x 1.25 mm, M14 x 1.50 mm, M14 x 2.00 mm, M16 x 1.50 mm, M16 x 2.00 mm, M18 x 1.50 mm, M18 x 2.50 mm, M20 x 2.50 mm, M22 x 1.50 mm, M24 x 2.00 mm, M24 x 3.00 mm	Plug	Hex	M14 x 1.25 mm, M14 x 1.50 mm, M14 x 2.00 mm, M16 x 1.50 mm, M16 x 2.00 mm, M18 x 1.50 mm, M18 x 2.50 mm, M20 x 2.50 mm, M22 x 1.50 mm, M24 x 2.00 mm, M24 x 3.00 mm	1 7/16", 1 13/16"	Plastic Case	Die Wrench (2), Tap Wrench	00000000	000000
40	4-40, 6-32, 8-32, 10-24, 10-32, 12-24, 1/8"-27, 1/4"-20, 1/4"-28, 5/16"-18, 5/16"-24, 3/8"-16, 3/8"-24, 7/16"-14, 7/16"-20, 1/2"-13, and 1/2"-20	Plug, Taper	Hex	4-40, 6-32, 8-32, 10-24, 10-32, 12-24, 1/8"-27, 1/4"-20, 1/4"-28, 5/16"-18, 5/16"-24, 3/8"-16, 3/8"-24, 7/16"-14, 7/16"-20, 1/2"-13, and 1/2"-20	5/8", 1"	Plastic Case	Die Wrench (2), Tap Wrench (3), Thread Gauge	0000000	000000
40	6-32, 8-32, 10-24, 1/8"-27, 1/4"-20, 5/16"-18, 3/8"-16, 7/16"-14, 1/2"-13, M4 × 0.70 mm, M5 × 0.80 mm, M6 × 1.00 mm, M7 × 1.00 mm, M8 × 1.25 mm, M10 × 1.25 mm, M10 × 1.50 mm, and M12 × 1.75 mm	Plug, Taper	Hex	6-32, 8-32, 10-24, 1/8"-27, 1/4"-20, 5/16"-18, 3/8"-16, 7/16"-14, 1/2"-13, M4 × 0.70 mm, M5 × 0.80 mm, M6 × 1.00 mm, M7 × 1.00 mm, M8 × 1.25 mm, M10 × 1.25 mm, M10 × 1.50 mm, and M12 × 1.75 mm	5/8", 1"	Plastic Case	Die Wrench (2), Tap Wrench (3), Thread Gauge	0000000	000000
40	1/8"-28, M3 × 0.50 mm, M4 × 0.70 mm, M4 × 0.75 mm, M5 × 0.80 mm, M5 × 0.90 mm, M6 × 1.00 mm, M7 × 1.00 mm, M8 × 1.00 mm, M8 × 1.25 mm, M9 × 1.00 mm, M9 × 1.25 mm, M10 × 1.25 mm, M10 × 1.50 mm, M11 × 1.50 mm, M12 × 1.50 mm, and M12 × 1.75 mm	Plug, Taper	Hex	1/8"-28, M3 × 0.50 mm, M4 × 0.70 mm, M4 × 0.75 mm, M5 × 0.80 mm, M5 × 0.90 mm, M6 × 1.00 mm, M7 × 1.00 mm, M8 × 1.00 mm, M8 × 1.25 mm, M9 × 1.00 mm, M9 × 1.25 mm, M10 × 1.25 mm, M10 × 1.50 mm, M11 × 1.50 mm, M12 × 1.50 mm, and M12 × 1.75 mm	5/8", 1"	Plastic Case	Die Wrench (2), Tap Wrench (3), Thread Gauge	0000000	000000
50	1/8"-28, 1/4"-19, M3 × 0.50 mm, M4 × 0.70 mm, M4 × 0.75 mm, M5 × 0.80 mm, M5 × 0.90 mm, M6 × 1.00 mm, M7 × 1.00 mm, M8 × 1.25 mm, M9 × 1.00 mm, M9 × 1.25 mm, M10 × 1.25 mm, M10 × 1.50 mm, M11 × 1.50 mm, M12 × 1.50 mm, M12 × 1.75 mm, M14 × 2.00 mm, M16 × 1.50 mm, M16 × 2.00 mm, M18 × 1.50 mm, and M18 × 2.50 mm	Plug, Taper	Hex	1/8"-28, 1/4"-19, M3 × 0.50 mm, M4 × 0.70 mm, M4 × 0.75 mm, M5 × 0.80 mm, M5 × 0.90 mm, M6 × 1.00 mm, M7 × 1.00 mm, M8 × 1.25 mm, M9 × 1.00 mm, M9 × 1.25 mm, M10 × 1.25 mm, M10 × 1.50 mm, M11 × 1.50 mm, M12 × 1.50 mm, M12 × 1.75 mm, M14 × 2.00 mm, M16 × 1.50 mm, M16 × 2.00 mm, M18 × 1.50 mm, and M18 × 2.50 mm	1", 1 7/16"	Plastic Case	Die Wrench (2), Tap Wrench (3), Thread Gauge	0000000	000000
53	6-32, 8-32, 10-24, 10-32, 12-24, 1/8"-27, 1/4"-18, 1/4"-20, 1/4"-28, 5/16"-18, 5/16"-24, 3/8"-16, 3/8"-24, 7/16"-14, 7/16"-20, 1/2"-13, 1/2"-20, 9/16"-12, 9/16"-18, 5/8"-11, 5/8"-18, 3/4"-10, and 3/4"-16	Plug, Taper	Hex	6-32, 8-32, 10-24, 10-32, 12-24, 1/8"-27, 1/4"-18, 1/4"-20, 1/4"-28, 5/16"-18, 5/16"-24, 3/8"-16, 3/8"-24, 7/16"-14, 7/16"-20, 1/2"-13, 1/2"-20, 9/16"-12, 9/16"-18, 5/8"-11, 5/8"-18, 3/4"-10, and 3/4"-16	1", 1 7/16"	Plastic Case	Die Wrench (2), Screwdriver, Tap Wrench (3), Thread Gauge	0000000	000000
63	1/8"-28, M3 × 0.50 mm, M4 × 0.70 mm, M4 × 0.75 mm, M5 × 0.80 mm, M5 × 0.90 mm, M6 × 1.00 mm, M7 × 1.00 mm, M8 × 1.00 mm, M8 × 1.25 mm, M9 × 1.00 mm, M9 × 1.25 mm, M10 × 1.25 mm, M10 × 1.50 mm, M11 × 1.50 mm, M12 × 1.50 mm, M12 × 1.75 mm, M14 × 1.50 mm, M14 × 2.00 mm, M16 × 1.50 mm, M16 × 2.00 mm, M18 × 1.50 mm, M18 × 2.50 mm, M20 × 2.50 mm, M22 × 1.50 mm, M24 × 2.00 mm, and M24 × 3.00 mm	Plug, Taper	Hex	1/8"-28, M3 × 0.50 mm, M4 × 0.70 mm, M4 × 0.75 mm, M5 × 0.80 mm, M5 × 0.90 mm, M6 × 1.00 mm, M7 × 1.00 mm, M8 × 1.00 mm, M8 × 1.25 mm, M9 × 1.00 mm, M9 × 1.25 mm, M10 × 1.25 mm, M10 × 1.50 mm, M11 × 1.50 mm, M12 × 1.50 mm, M12 × 1.75 mm, M14 × 1.50 mm, M14 × 2.00 mm, M16 × 1.50 mm, M16 × 2.00 mm, M18 × 1.50 mm, M18 × 2.50 mm, M20 × 2.50 mm, M22 × 1.50 mm, M24 × 2.00 mm, and M24 × 3.00 mm	5/8", 1", 1 3/16", 1 7/16", 1 13/16"	Plastic Case	Die Wrench (4), Tap Wrench (4), Thread Gauge	0000000	000000
65	4-40, 6-32, 8-32, 10-24, 10-32, 12-24, 1/8"-27, 1/4"-18, 1/4"-20, 1/4"-28, 5/16"-18, 5/16"-24, 3/8"-16, 3/8"-24, 7/16"-14, 7/16"-20, 1/2"-13, 1/2"-20, 9/16"-12, 9/16"-18, 5/8"-11, 5/8"-18, 3/4"-10, 3/4"-16, 7/8"-9, 7/8"-14, 1"-8, and 1"-14	Plug, Taper	Hex	4-40, 6-32, 8-32, 10-24, 10-32, 12-24 1/8"-27, 1/4"-18, 1/4"-20, 1/4"-28, 5/16"-18, 5/16"-24, 3/8"-16, 3/8"-24, 7/16"-14, 7/16"-20, 1/2"-13, 1/2"-20, 9/16"-12, 9/16"-18, 5/8"-11, 5/8"-18, 3/4"-10, 3/4"-16, 7/8"-9, 7/8"-14, 1"-8, and 1"-14	5/8", 1", 1 7/16", 1 13/16"	Plastic Case	Die Wrench (4), Tap Wrench (4), Thread Gauge	00000000	000000
High-Speed Steel
Right-Hand Thread
12	1/8, 1/4, 3/8, 1/2, 3/4, and 1	Taper	Hex	1/8, 1/4, 3/8, 1/2, 3/4, and 1	25/32", 1 1/16", 1 1/4", 1 5/8", 1 13/16", 2 3/16"	Plastic Case	__	0000000	000000
19	M3 × 0.50 mm, M4 × 0.70 mm, M5 × 0.80 mm, M6 × 1.00 mm, M8 × 1.25 mm, M10 × 1.50 mm, and M12 × 1.75 mm	Plug	Round	M3 × 0.50 mm, M4 × 0.70 mm, M5 × 0.80 mm, M6 × 1.00 mm, M8 × 1.25 mm, M10 × 1.50 mm, and M12 × 1.75 mm	__	Metal Case	Die Wrench, Screwdriver, Tap Wrench (2), Thread Gauge	0000000	000000
40	4-40, 6-32, 8-32, 10-24, 10-32, 12-24, 1/8"-27, 1/4"-20, 1/4"-28, 5/16"-18, 5/16"-24, 3/8"-16, 3/8"-24, 7/16"-14, 7/16"-20, 1/2"-13, and 1/2"-20	Plug	Hex	4-40, 6-32, 8-32, 10-24, 10-32, 12-24, 1/8"-27, 1/4"-20, 1/4"-28, 5/16"-18, 5/16"-24, 3/8"-16, 3/8"-24, 7/16"-14, 7/16"-20, 1/2"-13, and 1/2"-20	1"	Plastic Case	Die Wrench, Screwdriver, Tap Wrench (3), Thread Gauge	00000000	000000
58	6-32, 8-32, 10-24, 10-32, 12-24, 1/8"-27, 1/4"-18, 1/4"-20, 1/4"-28, 5/16"-18, 5/16"-24, 3/8"-16, 3/8"-24, 7/16"-14, 7/16"-20, 1/2"-13, 1/2"-20, 9/16"-12, 9/16"-18, 5/8"-11, 5/8"-18, 3/4"-10, and 3/4"-16	Plug	Hex	6-32, 8-32, 10-24, 10-32, 12-24, 1/8"-27, 1/4"-18, 1/4"-20, 1/4"-28, 5/16"-18, 5/16"-24, 3/8"-16, 3/8"-24, 7/16"-14, 7/16"-20, 1/2"-13, 1/2"-20, 9/16"-12, 9/16"-18, 5/8"-11, 5/8"-18, 3/4"-10, and 3/4"-16	1", 1 7/16"	Plastic Case	Die Wrench (2), Extractor (5), Screwdriver, Tap Wrench (3), Thread Gauge	00000000	000000

Tap, Die, and Drill Bit Sets

Cut and repair threads and drill holes in many different sizes. Tap and die wrenches are included. The dies are hex shaped for use with conventional wrenches. The taps are made of carbon steel and are recommended for thread repair and occasional tapping.

Plug-chamfer taps are a versatile choice for most tapping applications. With 3-5 chamfered cutting threads, they require moderate torque and are often used for start-to-finish tapping of through holes and closed-end holes. However, they do not start threads as easily as taper chamfers. When using them to tap closed-end holes, be sure to leave sufficient space at the bottom for chips to accumulate.

Carbon Steel
No. of Pieces	Tap Sizes Included	Die Sizes Included	Drill Bit Sizes Included	Container Type	Includes		Each
Right-Hand Thread
117	4-40, 6-32, 8-32, 10-24, 10-32, 12-24, 1/8"-27, 1/8"-28, 1/4"-20, 1/4"-28, 5/16"-18, 5/16"-24, 3/8"-16, 3/8"-24, 7/16"-14, 7/16"-20, 1/2"-13, 1/2"-20, M3 × 0.50 mm, M4 × 0.70 mm, M4 × 0.75 mm, M5 × 0.80 mm, M5 × 0.90 mm, M6 × 1.00 mm, M7 × 1.00 mm, M8 × 1.00 mm, M8 × 1.25 mm, M9 × 1.00 mm, M9 × 1.25 mm, M10 × 1.25 mm, M10 × 1.50 mm, M11 × 1.50 mm, M12 × 1.50 mm, and M12 × 1.75 mm	4-40, 6-32, 8-32, 10-24, 10-32, 12-24, 1/8"-27, 1/8"-28, 1/4"-20, 1/4"-28, 5/16"-18, 5/16"-24, 3/8"-16, 3/8"-24, 7/16"-14, 7/16"-20, 1/2"-13, 1/2"-20, M3 × 0.50 mm, M4 × 0.70 mm, M4 × 0.75 mm, M5 × 0.80 mm, M5 × 0.90 mm, M6 × 1.00 mm, M7 × 1.00 mm, M8 × 1.00 mm, M8 × 1.25 mm, M9 × 1.00 mm, M9 × 1.25 mm, M10 × 1.25 mm, M10 × 1.50 mm, M11 × 1.50 mm, M12 × 1.50 mm, and M12 × 1.75 mm	5/64", 7/64", 5/32", 1/4", 19/64", 5/16", 21/64", 3/8", 25/64", 13/32", 27/64", 29/64", 43 ga., 39 ga., 36 ga., 30 ga., 29 ga., 25 ga., 21 ga., 20 ga., 16 ga., 9 ga., 7 ga., 3 ga., B, F, H, I, J, O, Q, R, S, U, and Z	Plastic Case	Die Wrench (2), Extractor (5), Tap Wrench (3), Thread Gauge (2)	00000000	0000000

Thread Repairing Tap, Die, and File Sets

Repair screw threads in a wide range of sizes. The dies are hex shaped for use with conventional wrenches. The taps have a square shank that's compatible with tap wrenches and tap holders for drill presses and drilling machines. With a plug chamfer, all taps have 3-5 chamfered threads and are suitable for thread repair in both through holes and closed-end holes.

Carbon Steel
Number of Pieces	Tap Sizes Included	Die Sizes Included	File Sizes Included	Container Type		Each
Right-Hand Thread
53	1/4”-20, 1/4”-28, 5/16”-18, 5/16"-24, 3/8"-16, 3/8"-24, 7/16"-14, 7/16"-20, 1/2"-13, 1/2"-20, 9/16”-12, 9/16"-18, M6 × 1.00 mm, M8 × 1.25 mm, M10 × 1.25 mm, M10 × 1.50 mm, M12 × 1.25 mm, M12 × 1.50 mm, and M12 × 1.75 mm	1/4"-20, 1/4"-28, 5/16"-18, 5/16"-24, 3/8"-16, 3/8"-24, 7/16"-14, 7/16"-20, 1/2"-13, 1/2"-20, 9/16"-12, 9/16"-18, 5/8"-11, 5/8"-18, 3/4"-10, 3/4"-16, 3/4"-20, M6 × 1.00 mm, M6 × 1.25 mm, M7 × 1.00 mm, M8 × 1.00 mm, M8 × 1.25 mm, M8 × 1.50 mm, M10 × 1.00 mm, M10 × 1.25 mm, M10 × 1.50 mm, M12 × 1.25 mm, M12 × 1.50 mm, M12 × 1.75 mm, M14 × 1.25 mm, M14 × 1.50 mm, and M20 × 1.50 mm	For 11 to 24 threads per inch, For 0.8 to 3 mm thread pitches	Plastic Case	00000000	0000000

Tap and Die Wrench Sets

Switch from internal to external threading with interchangeable tap and die adapters. Use them with the included ratcheting wrench. The attachable sliding T-handle moves from side to side for accessing tight spaces.

Includes	Tap Sizes Included	Die Sizes Included	Container Type		Each
Tap Adapter for Tap Sizes No. 4 to No. 12 Tap Adapter for Tap Sizes 1/4" to 1/2" Die Adapter for 1" Wide Hex Dies Ratcheting Wrench with Attachable Sliding T-Handle	__	__	Plastic Case	0000000	000000
Die Spacer Adapter Metric Feeler Gauge 17 Taps 17 Dies 4 mm Hex L-Key Tap Adapter for Tap Sizes No. 4 to No. 12 Tap Adapter for Tap Sizes 1/4" to 1/2" Die Adapter for 1" Wide Hex Dies Ratcheting Wrench with Attachable Sliding T-Handle	1/8"-28, M3 × 0.50 mm, M3 x 0.60 mm, M4 × 0.70 mm, M4 x 0.75 mm, M5 × 0.80 mm, M5 x 0.90 mm, M6 × 1.00 mm, M7 x 1.00 mm, M8 × 1.25 mm, M9 × 1.00 mm, M9 × 1.25 mm, M10 × 1.25 mm, M10 × 1.50 mm, M11 × 1.50 mm, M12 x 1.50 mm, M12 x 1.75 mm	1/8"-28, M3 × 0.50 mm, M3 x 0.60 mm, M4 × 0.70 mm, M4 × 0.75 mm, M5 × 0.80 mm, M5 × 0.90 mm, M6 × 1.00 mm, M7 × 1.00 mm, M8 × 1.25 mm, M9 × 1.00 mm, M9 × 1.25 mm, M10 x 1.25 mm, M10 x 1.50 mm, M11 x 1.50 mm, M12 x 1.50 mm, M12 x 1.75 mm	Plastic Case	0000000	000000
Die Spacer Adapter Metric Feeler Gauge 34 Taps 34 Dies 4 mm Hex L-Key Inch Feeler Gauge Tap Adapter for Tap Sizes No. 4 to No. 12 Tap Adapter for Tap Sizes 1/4" to 1/2" Die Adapter for 1" Wide Hex Dies Ratcheting Wrench with Attachable Sliding T-Handle	4-40, 6-32, 8-32, 10-24, 10-32, 12-24, 1/8"-27, 1/8"-28, 1/4"-20, 1/4"-28, 5/16"-18, 5/16"-24, 3/8"-16, 3/8"-24, 7/16"-14, 7/16"-20, 1/2"-13, 1/2"-20, M3 × 0.5 mm, M3 x 0.60 mm, M4 × 0.70 mm, M4 x 0.75 mm, M5 × 0.80 mm, M5 × 0.90 mm, M6 × 1.00 mm, M7 × 1.0 mm, M8 x 1.25 mm, M9 × 1.00 mm, M9 × 1.25 mm, M10 × 1.25 mm, M10 × 1.50 mm, M11 × 1.50 mm, M12 x 1.50 mm, M12 x 1.75 mm	4-40, 6-32, 8-32, 10-24, 10-32, 12-24, 1/8"-27, 1/8"-28, 1/4"-20, 1/4"-28, 5/16"-18, 5/16"-24, 3/8"-16, 3/8"-24, 7/16"-14, 7/16"-20, 1/2"-13, 1/2"-20, M3 × 0.50 mm, M3 x 0.60 mm, M4 × 0.70 mm, M4 × 0.75 mm, M5 × 0.80 mm, M5 × 0.90 mm, M6 × 1.00 mm, M7 × 1.00 mm, M8 × 1.25 mm, M9 × 1.00 mm, M9 × 1.25 mm, M10 x 1.25 mm, M10 x 1.50 mm, M11 x 1.50 mm, M12 x 1.50 mm, M12 x 1.75 mm	Plastic Case	0000000	000000
5 Extractors Metric Feeler Gauge 48 Taps 48 Dies 4 mm Hex L-Key Inch Feeler Gauge Tap Adapter for Tap Sizes No. 4 to No. 12 Tap Adapter for Tap Sizes 1/4" to 1/2" Locking Tap Adapter for Tap Sizes 9/16" to 3/4" Die Adapter for 1" Wide Hex Dies Die Adapter for 1 7/16" Wide Hex Dies 3/8 Drive Female Extension Adapter 3/8 Drive Male Extension Adapter (2) Ratcheting Wrench with Attachable Sliding T-Handle	4-40, 6-32, 8-32, 10-24, 10-32, 12-24, 1/8"-27, 1/8"-28, 1/4"-18, 1/4"-19, 1/4"-20, 1/4"-28, 5/16"-18, 5/16"-24, 3/8"-16, 3/8"-24, 7/16"-14, 7/16"-20, 1/2"-13, 1/2"-20, 9/16"-12, 9/16"-18, 5/8"-11, 5/8"-18, 3/4"-10, 3/4"-16, M3 × 0.5 mm, M3 x 0.60 mm, M4 × 0.70 mm, M4 x 0.75 mm, M5 × 0.80 mm, M5 × 0.90 mm, M6 × 1.00 mm, M7 × 1.0 mm, M8 x 1.25 mm, M9 × 1.00 mm, M9 × 1.25 mm, M10 × 1.25 mm, M10 × 1.50 mm, M11 × 1.50 mm, M12 x 1.50 mm, M12 x 1.75 mm, M14 x 1.25 mm, M14 x 2.00 mm, M16 x 1.50 mm, M16 x 2.00 mm, M18 x 1.50 mm, and M18 x 2.50 mm	4-40, 6-32, 8-32, 10-24, 10-32, 12-24, 1/8"-27, 1/8"-28, 1/4"-18, 1/4"-19, 1/4"-20, 1/4"-28, 5/16"-18, 5/16"-24, 3/8"-16, 3/8"-24, 7/16"-14, 7/16"-20, 1/2"-13, 1/2"-20, 9/16"-12, 9/16"-18, 5/8"-11, 5/8"-18, 3/4"-10, 3/4"-16, M3 × 0.50 mm, M3 x 0.60 mm, M4 × 0.70 mm, M4 × 0.75 mm, M5 × 0.80 mm, M5 × 0.90 mm, M6 × 1.00 mm, M7 × 1.00 mm, M8 × 1.25 mm, M9 × 1.00 mm, M9 × 1.25 mm, M10 x 1.25 mm, M10 x 1.50 mm, M11 x 1.50 mm, M12 x 1.50 mm, M12 x 1.75 m, M14 x 1.25 mm, M14 x 2.00 mm, M16 x 1.50 mm, M16 x 2.00 mm, M18 x 1.50 mm, and M18 x 2.50 mm	Plastic Case	0000000	000000

Thread Repairing Die Sets

Repair rusted or damaged external threads in a variety of sizes. These dies are hex shaped for use with conventional wrenches.

Plastic Pouch
Number of Pieces	Thread Direction	Die Sizes Included		Each
Carbon Steel
5	Right Hand	3/4"-16 (1 1/16" Wd.), 7/8"-14 (1 1/4" Wd.), 1"-14 (1 1/2" Wd.), 1 1/8"-12 (1 5/8" Wd.), and 1 1/4"-12 (1 3/4" Wd.)	0000000	000000
5	Right Hand	3/4"-10 (1 1/16" Wd.), 7/8"-9 (1 1/4" Wd.), 1"-8 (1 1/2" Wd.), 1 1/8"-7 (1 5/8" Wd.), and 1 1/4"-7 (1 3/4" Wd.)	0000000	00000
5	Right Hand	M6 × 1.0 mm (11 mm Wd.), M7 × 1.0 mm (14 mm Wd.), M8 × 1.25 mm (14 mm Wd.), M10 × 1.5 mm (18 mm Wd.), and M12 × 1.75 mm (19 mm Wd.)	0000000	0000
7	Right Hand	1/4"-28 (7/16" Wd.), 5/16"-24 (1/2" Wd.), 3/8"-24 (9/16" Wd.), 7/16"-20 (11/16" Wd.), 1/2"-20 (3/4" Wd.), 9/16"-18 (7/8" Wd.), and 5/8"-18 (15/16"Wd.)	0000000	00000
7	Right Hand	1/4"-20 (7/16" Wd.), 5/16"-18 (1/2" Wd.), 3/8"-16 (9/16" Wd.), 7/16"-14 (11/16" Wd.), 1/2"-13 (3/4" Wd.), 9/16"-12 (7/8" Wd.), and 5/8"-11 (15/16"Wd.)	0000000	00000
7	Left Hand	1/4"-28 (7/16" Wd.), 5/16"-24 (1/2" Wd.), 3/8"-24 (9/16" Wd.), 7/16"-20 (11/16" Wd.), 1/2"-20 (3/4" Wd.), 9/16"-18 (7/8" Wd.), and 5/8"-18 (15/16" Wd.)	0000000	00000
7	Left Hand	1/4"-20 (7/16" Wd.), 5/16"-18 (1/2" Wd.), 3/8"-16 (9/16" Wd.), 7/16"-14 (11/16" Wd.), 1/2"-13 (3/4" Wd.), 9/16"-12 (7/8" Wd.), and 5/8"-11 (15/16" Wd.)	0000000	00000
8	Right Hand	1/4"-20 (7/16" Wd.), 5/16"-18 (1/2" Wd.), 3/8"-16 (9/16" Wd.), 7/16"-14 (11/16" Wd.), 1/2"-13 (3/4" Wd.), 9/16"-12 (7/8" Wd.), 5/8"-11 (15/16" Wd.), and 3/4"-10 (1 1/8" Wd.)	0000000	00000
8	Right Hand	1/4"-28 (7/16" Wd.), 5/16"-24 (1/2" Wd.), 3/8"-24 (9/16" Wd.), 7/16"-20 (11/16" Wd.), 1/2"-20 (3/4" Wd.), 9/16"-18 (7/8" Wd.), 5/8"-18 (15/16" Wd.), and 3/4"-16 (1 1/8" Wd.)	0000000	00000
Plastic Case
Carbon Steel
7	Right Hand	M6 × 1.0 mm (19/32" Wd.), M8 × 1.25 mm (11/16" Wd.), M10 × 1.5 mm (7/8" Wd.), M12 × 1.75 mm (1 1/16" Wd.), M14 × 2.0 mm (1 1/16" Wd.), M16 × 2.0 mm (1 1/4" Wd.), and M20 × 2.5 mm (1 5/8" Wd.)	0000000	000000
8	Right Hand	1/4"-20 (19/32" Wd.), 5/16"-18 (11/16" Wd.), 3/8"-16 (25/32" Wd.), 7/16”-14 (7/8" Wd.), 1/2"-13 (1 1/16" Wd.), 9/16"-12 (1 1/16" Wd.), 5/8"-11 (1 1/4" Wd.), and 3/4"-10 (1 7/16" Wd.)	000000	000000
10	Right Hand	1/4"-20 (19/32" Wd.), 5/16"-18 (11/16" Wd.), 3/8"-16 (25/32" Wd.), 7/16"-14 (7/8" Wd.), 1/2"-13 (1 1/16" Wd.), 9/16"-12 (1 1/16" Wd.), 5/8"-11 (1 1/4" Wd.), 3/4"-10 (1 7/16" Wd.), 7/8"-9 (1 5/8" Wd.), and 1"-8 (1 13/16" Wd.)	000000	000000
20	Right Hand	1/4"-20 (19/32" Wd.), 1/4"-28 (19/32" Wd.), 5/16"-18 (11/16" Wd.), 5/16"-24 (11/16" Wd.), 3/8"-16 (25/32" Wd.), 3/8"-24 (25/32" Wd.), 7/16"-14 (7/8" Wd.), 7/16"-20 (7/8" Wd.), 1/2"-13 (1 1/16" Wd.), 1/2"-20 (1 1/16" Wd.), 9/16"-12 (1 1/16" Wd.), 9/16"-18 (1 1/16 Wd."), 5/8"-11 (1 1/4" Wd.), 5/8"-18 (1 1/4" Wd.), 3/4"-10 (1 7/16" Wd.), 3/4"-16 (1 7/16" Wd.), 7/8"-14 (1 5/8" Wd.), 7/8"-9 (1 5/8 Wd."), 1"-8 (1 13/16" Wd.), and 1"-14 (1 13/16" Wd.)	000000	000000
Wood Case
Carbon Steel
6	Right Hand	1/8-27 (1/16" Wd.), 1/4-18 (1 1/4" Wd.), 3/8-18 (1 7/16" Wd.), 1/2-14 (1 5/8" Wd.), 3/4-14 (2" Wd.), and 1-11 1/2 (2 3/8" Wd.)	0000000	000000

Thread Repairing Die and File Sets for Tight Spots

Renew external threads in a wide range of sizes. The dies in these sets have a narrower width than standard dies, making them a good choice for thread repair in tight spots. They're hex shaped for use with conventional wrenches.

Carbon Steel
Number of Pieces	Die Sizes Included	File Sizes Included	Container Type		Each
Right-Hand Thread
13	M6 × 1.00 mm (11 mm Wd.), M6 × 1.25 mm (11 mm Wd.), M8 × 1.00 mm (14 mm Wd.), M8 × 1.25 mm (14 mm Wd.), M8 × 1.50 mm (14 mm Wd.), M10 × 1.00 mm (18 mm Wd.), M10 × 1.25 mm (18 mm Wd.), M10 × 1.50 mm (18 mm Wd.), M12 × 1.25 mm (19 mm Wd.), M12 × 1.50 mm (19 mm Wd.), M14 × 1.25 mm (21 mm Wd.), and M14 × 1.50 mm (21 mm Wd.)	For 0.8 to 3 mm thread pitches	Plastic Case	0000000	000000
15	1/4"-20 (7/16" Wd.), 1/4"-28 (7/16" Wd.), 5/16"-18 (1/2" Wd.), 5/16"-24 (1/2" Wd.), 3/8"-16 (9/16" Wd.), 3/8"-24 (9/16" Wd.), 7/16"-14 (11/16" Wd.), 7/16"-20 (11/16" Wd.), 1/2"-13 (3/4" Wd.), 1/2"-20 (3/4" Wd.), 9/16"-12 (7/8" Wd.), 9/16"-18 (7/8" Wd.), 5/8"-11 (15/16" Wd.), and 5/8"-18 (15/16" Wd.)	For 11 to 24 threads per inch	Plastic Case	0000000	00000
18	1/4"-20 (7/16" Wd.), 1/4"-28 (7/16" Wd.), 5/16"-18 (1/2" Wd.), 5/16"-24 (1/2" Wd.), 3/8"-16 (9/16" Wd.), 3/8"-24 (9/16" Wd.), 7/16"-14 (11/16" Wd.), 7/16"-20 (11/16" Wd.), 1/2"-13 (3/4" Wd.), 1/2"-20 (3/4" Wd.), 9/16"-12 (7/8" Wd.), 9/16"-18 (7/8" Wd.), 5/8"-11 (15/16" Wd.), 5/8"-18 (15/16" Wd.), 3/4"-10 (1 1/16" Wd.), and 3/4"-16 (1 1/16" Wd.)	For 9 to 32 threads per inch, For 11 to 24 threads per inch	Plastic Case	0000000	00000

Two-Piece Thread Repairing Die Sets

Clamp these dies around your workpiece, so you can start thread repair anywhere along the length of a bolt, stud, or rod. They're hex shaped for use with conventional wrenches.

Tool Steel
Number of Pieces	Die Sizes Included	Wd.	Container Type		Each
Right-Hand Thread
18	M5-.80 mm, M6-1.0 mm, M8-1.0 mm, M8-1.25 mm, M9-1.0 mm, M9-1.25 mm, M10-1.0 mm, M10-1.25 mm, M10-1.5 mm, M11-1.5 mm, M12-1.25 mm, M12-1.5 mm, M12-1.75 mm, M14-1.25 mm, M14-1.5 mm, M16-2.0 mm, M20-2.5 mm, M24-3.0 mm	1", 1 3/8", 1 3/4"	Plastic Case	0000000	0000000
20	1/4"-20, 1/4"-28, 5/16"-18, 5/16"-24, 3/8"-16, 3/8"-24, 7/16"-14, 7/16"-20, 1/2"-13, 1/2"-20, 9/16"-12, 9/16"-18, 5/8"-11, 5/8"-18, 3/4"-10, 3/4"-16, 7/8"-9, 7/8"-14, 1"-8, 1"-14	1", 1 3/8", 1 3/4"	Plastic Case	0000000	000000

Cut several sizes of external screw threads. Loosen and tighten the die with the included set screw to adjust thread depth.

Carbon steel dies are for use on most metal and plastic. High-speed steel dies last longer than carbon steel when cutting similar material.

Carbon Steel
Number of Pieces	Die Sizes Included	OD	Container Type		Each
Right-Hand Thread
4	10-32, 1/4"-28, 5/16"-24, and 3/8"-24	1"	Plastic Case	0000000	000000
6	6-32, 8-32, 10-24, 1/4"-20, 5/16"-18, and 3/8"-16	1"	Plastic Case	0000000	00000
6	2-56, 3-48, 4-40, 5-40, 6-32, and 8-32	13/16"	Plastic Case	0000000	000000
6	2-64, 3-56, 4-48, 5-44, 6-40, and 8-36	13/16"	Plastic Case	0000000	000000
High-Speed Steel
Right-Hand Thread
4	10-32, 1/4"-28, 5/16"-24, and 3/8"-24	1"	Plastic Case	0000000	000000
6	5-44, 6-40, 8-36, 10-32, 1/4"-28, and 5/16"-24	13/16"	Plastic Case	0000000	000000
6	5-40, 6-32, 8-32, 10-24, 1/4"-20, and 5/16"-18	13/16"	Plastic Case	0000000	000000
6	6-32, 8-32, 10-24, 1/4"-20, 5/16"-18, and 3/8"-16	1"	Plastic Case	0000000	000000