Diesel Fuel Piston Pumps

	REACH (Registration, Evaluation, Authorization and Restriction of Chemicals) REACH (Registration, Evaluation, Authorization and Restriction of Chemicals)

REACH Compliant

	RoHS (Restriction of Hazardous Substances) RoHS (Restriction of Hazardous Substances)

RoHS Compliant

RoHS Compliant with
Exemptions

Forward

How can we improve?

98 Products

PTFE Air-Powered Transfer Pumps for Harsh Chemicals

With all PTFE wetted parts, these pumps offer the best chemical resistance of all our air-powered transfer pumps and can handle solvents and petroleum-based fluids that PVDF pumps can’t. Pumps are self-priming, which means they create a suction force to draw liquid upward to fill the pump chamber. All can run dry.

Fluid-side maintenance kits include diaphragms, check valve balls, and seals.

Air-motor maintenance kits include seals, O-rings, gaskets, retaining rings, and an air valve spool.

Threaded Side Intake and Side Discharge

					Overall
Max. Flow Rate, gpm	Air Consumption, cfm	Air Connection (NPT)	Intake Pipe Connection (NPT)	Discharge Pipe Connection (NPT)	Lg.	Wd.	Ht.		Each
231 Max. ft. of Head—100 psi Max. Discharge Pressure
2.5	4.8	1/8 Female	1/4 Female	1/4 Female	3 3/8"	5 1/2"	6 1/2"	000000	000000000
6.7	9.3	1/8 Female	3/8 Female	3/8 Female	3 1/2"	5 7/8"	7 5/8"	000000	00000000
16	29	1/4 Female	1/2 Female	1/2 Female	6"	9 3/16"	8"	000000	00000000
39	46	1/4 Female	1 Female	1 Female	8"	10 7/8"	10 3/8"	000000	00000000

Fluid-Side Maintenance Kit for 2925N1	Each	0000000
Air-Motor Maintenance Kit for 2925N1	Each	000000
Fluid-Side Maintenance Kit for 2925N4	Each	00000000
Air-Motor Maintenance Kit for 2925N4	Each	000000
Fluid-Side Maintenance Kit for 2925N2	Each	000000
Air-Motor Maintenance Kit for 2925N2	Each	000000
Fluid-Side Maintenance Kit for 2925N3	Each	000000
Air-Motor Maintenance Kit for 2925N3	Each	000000

316 Stainless Steel Air-Powered Transfer Pumps
for Chemicals, Fuel, and Flammable Liquids

With a 316 stainless steel housing and a PTFE diaphragm, these pumps resist a variety of acids, alkalies, and flammable liquids such as phosphoric acid, acetone, and methyl ethyl ketone (MEK). They're designed for moving large volumes of thick sludges and slurries in demanding environments. Pumps are self-priming, which means they create a suction force to draw liquid upward to fill the pump chamber. All are submersible and can run dry.

Fluid-side maintenance kits include diaphragms, check valve balls, and seals.

Air-motor maintenance kits include seals, O-rings, gaskets, retaining rings, and an air valve spool.

For technical drawings and 3-D models, click on a part number.

Threaded Bottom Intake and Top Discharge

	Max. Flow Rate, gpm								Overall
Max. Flow Rate, gpm	@ 80 ft. of Head	@ 120 ft. of Head	@ 160 ft. of Head	Max. Viscosity, cP	Air Consumption, cfm	Air Connection (NPT)	Intake Pipe Connection (NPT)	Discharge Pipe Connection (NPT)	Lg.	Wd.	Ht.		Each
289 Max. ft. of Head—125 psi Max. Discharge Pressure
15	12	10	7	10,000	20	1/4 Female	1/2 Female	1/2 Female	9"	10"	10"	00000000	000000000
45	38	30	19	20,000	40	1/2 Female	1 Female	1 Female	13"	10"	13"	00000000	00000000
106	77	62	45	30,000	50	3/4 Female	1 1/2 Female	1 1/2 Female	15"	17"	22"	00000000	00000000
150	104	76	53	40,000	100	3/4 Female	2 Female	2 Female	15"	17"	26"	00000000	00000000
235	174	127	90	50,000	140	3/4 Female	3 Female	3 Female	17"	20"	32"	00000000	000000000

Air-Motor Maintenance Kit for 41655K28	Each	0000000
Fluid-Side Maintenance Kit for 41655K28	Each	000000
Air-Motor Maintenance Kit for 41655K29, 41655K31, 41655K32	Each	000000
Fluid-Side Maintenance Kit for 41655K29	Each	00000000
Fluid-Side Maintenance Kit for 41655K31	Each	00000000
Fluid-Side Maintenance Kit for 41655K32	Each	00000000
Air-Motor Maintenance Kit for 41655K27	Each	00000000
Fluid-Side Maintenance Kit for 41655K27	Each	000000

Aluminum Air-Powered Transfer Pumps for Oil, Chemicals, and Fuel

These pumps have a PTFE diaphragm compatible with oil, fuel, and chemicals such as mineral spirits, methyl ethyl ketone (MEK), and xylene. They have a rugged aluminum housing for moving large volumes of thick sludges and slurries in demanding environments. Pumps are self-priming, which means they create a suction force to draw liquid upward to fill the pump chamber. All are submersible and can run dry.

Fluid-side maintenance kits include diaphragms, check valve balls, and seals.

Air-motor maintenance kits include seals, O-rings, gaskets, retaining rings, and an air valve spool.

Threaded Bottom Intake and Top Discharge

	Max. Flow Rate, gpm								Overall
Max. Flow Rate, gpm	@ 80 ft. of Head	@ 120 ft. of Head	@ 160 ft. of Head	Max. Viscosity, cP	Air Consumption, cfm	Air Connection (NPT)	Intake Pipe Connection (NPT)	Discharge Pipe Connection (NPT)	Lg.	Wd.	Ht.		Each
289 Max. ft. of Head—125 psi Max. Discharge Pressure
15	12	10	7	10,000	20	1/4 Female	1/2 Female, 1/2 Female	1/2 Female, 1/2 Female	9"	10"	12"	0000000	000000000
45	38	30	19	20,000	40	1/2 Female	1 Female	1 Female	13"	10"	13"	0000000	00000000
106	77	62	45	30,000	50	3/4 Female	1 1/2 Female	1 1/2 Female	15"	17"	22"	0000000	00000000
150	104	76	53	40,000	100	3/4 Female	2 Female	2 Female	15"	17"	26"	0000000	00000000
235	174	127	90	50,000	140	3/4 Female	3 Female	3 Female	17"	20"	32"	0000000	00000000

Fluid-Side Maintenance Kit for 9948K21	Each	000000000
Air-Motor Maintenance Kit for 9948K21, 9948K23 and 9948K24	Each	000000
Fluid-Side Maintenance Kit for 9948K16	Each	000000
Air-Motor Maintenance Kit for 9948K16	Each	00000000
Air-Motor Maintenance Kit for 9948K19	Each	000000
Fluid-Side Maintenance Kit for 9948K19	Each	000000
Fluid-Side Maintenance Kit for 9948K24	Each	00000000
Fluid-Side Maintenance Kit for 9948K23	Each	00000000

Aluminum Air-Powered Transfer Pumps for Oil and Chemicals

A neoprene diaphragm resists oil and chemicals such as isopropyl alcohol and deionized water. These pumps have a rugged aluminum housing for moving large volumes of thick sludges and slurries in demanding environments. Pumps are self-priming, which means they create a suction force to draw liquid upward to fill the pump chamber. All are submersible and can run dry.

Air-motor maintenance kits include seals, O-rings, gaskets, retaining rings, and an air valve spool.

Threaded Bottom Intake and Top Discharge

	Max. Flow Rate, gpm									Overall
Max. Flow Rate, gpm	@ 80 ft. of Head	@ 120 ft. of Head	@ 160 ft. of Head	Max. Solids Dia.	Max. Viscosity, cP	Air Consumption, cfm	Air Connection (NPT)	Intake Pipe Connection (NPT)	Discharge Pipe Connection (NPT)	Lg.	Wd.	Ht.		Each
15	12	10	7	1/8"	10,000	20	1/4 Female	1/2 Female	1/2 Female	9"	10"	12"	0000000	000000000

Air-Motor Maintenance Kit for 9948K27	0000000	Each	000000000
Fluid-Side Maintenance Kit for 9948K28	0000000	Each	00000000

Plastic Air-Powered Transfer Pumps for Fuel and Flammable Liquids

These pumps can be grounded to dissipate static electricity and are rated for use with flammable liquids such as gasoline, kerosene, isopropyl alcohol, and mineral spirits. All are self-priming, which means they create a suction force to draw liquid upward to fill the pump chamber. Pumps are submersible and can run dry.

Fluid-side maintenance kits include diaphragms, check valve balls, and seals.

Air-motor maintenance kits include seals, O-rings, gaskets, retaining rings, and an air valve spool.

With NPT Threaded Bottom Intake and Top Discharge

With Bottom Intake and Top Discharge

	Max. Flow Rate, gpm								Overall
Max. Flow Rate, gpm	@ 40 ft. of Head	@ 120 ft. of Head	@ 160 ft. of Head	Max. Viscosity, cP	Air Consumption, cfm	Air Connection (NPT)	Intake Pipe Connections (NPT)	Discharge Pipe Connections (NPT)	Lg.	Wd.	Ht.		Each
231 ft. of Head—100 psi Max. Discharge Pressure
6.5	5.5	4	2.75	3,000	5.5	1/4 Female	3/8 Female	3/8 Female	5"	8"	8"	00000000	0000000

Air Motor Repair Kit for 13465K25	00000000	Each	0000000
Fluid Side Repair Kit for 13465K25	00000000	Each	000000

With NPT Threaded Side Intake and Discharge

With Side Intake and Discharge

	Max. Flow Rate, gpm								Overall
Max. Flow Rate, gpm	@ 80 ft. of Head	@ 120 ft. of Head	@ 160 ft. of Head	Max. Viscosity	Air Consumption, cfm	Air Connection (NPT)	Intake Pipe Connections (NPT)	Discharge Pipe Connections (NPT)	Lg.	Wd.	Ht.		Each
288 ft. of Head—125 psi Max. Discharge Pressure
5.3	3.2	2.3	1.7	Not Rated	6.1	1/4 Female	1/4 Female, 3/4 Male	1/4 Female, 3/4 Male	7"	5"	7"	0000000	0000000

Aluminum Air-Powered Transfer Pumps for Fuel and Flammable Liquids

UL listed for pumping petroleum products and rated for use with flammable liquids, these pumps move diesel fuel, gasoline, kerosene, and mineral spirits. They can be grounded to dissipate static electricity. All have a pressure-relief valve set at 50 psi per UL 79 safety standard. Pumps are self-priming, which means they create a suction force to draw liquid upward to fill the pump chamber. All are submersible and can run dry.

Fluid-side maintenance kits include diaphragms, check valve balls, and seals.

Air-motor maintenance kits include seals, O-rings, gaskets, retaining rings, and an air valve spool.

Threaded Bottom Intake and Top Discharge

	Max. Flow Rate, gpm									Overall
Max. Flow Rate, gpm	@ 20 ft. of Head	@ 40 ft. of Head	@ 60 ft. of Head	@ 100 ft. of Head	Max. Viscosity, cP	Air Consumption, cfm	Air Connection (NPT)	Intake Pipe Connection (NPT)	Discharge Pipe Connection (NPT)	Lg.	Wd.	Ht.		Each
115 Max. ft. of Head—50 psi Max. Discharge Pressure
12	12	11.1	10.3	8.5	1,000	12	1/4 Female	1/2 Female	1/2 Female	8"	8"	12"	00000000	000000000
29	28	21	17	8	1,000	32	1/4 Female	1 Female	1 Female	8"	9"	13"	00000000	00000000
75	66	55	44	13	1,000	75	1/2 Female	1 1/2 Female	1 1/2 Female	15"	13"	20"	00000000	00000000
75	95	80	65	20	1,000	75	1/2 Female	2 Female	2 Female	15"	13"	20"	00000000	00000000

Air-Motor Maintenance Kit for 13455K36, 13455K37 and 13455K38	Each	000000
Fluid-Side Maintenance Kit for 13455K36	Each	000000
Fluid-Side Maintenance Kit for 13455K37 and 13455K38	Each	00000000
Fluid-Side Maintenance Kit for 13455K41	Each	000000
Air-Motor Maintenance Kit for 13455K41	Each	000000

Aluminum Air-Powered Transfer Pumps for Fuel, Oil, and Large Solids

The fluoroelastomer diaphragm withstands higher temperatures than a neoprene diaphragm and has better resistance to fuel such as gasoline and kerosene. These pumps have large internal pathways and check valves with flaps to accommodate thick sewage, abrasive slurries, and industrial waste with large solids that would damage standard air-powered transfer pumps. All are self-priming, which means they create a suction force to draw liquid upward to fill the pump chamber. Pumps are submersible and can run dry.

Fluid-side maintenance kits include diaphragms, check valve balls, and seals.

Air-motor maintenance kits include seals, O-rings, gaskets, retaining rings, and an air valve spool.

Threaded Top Intake and Bottom Discharge

70 gpm Max. Flow

140 gpm Max. Flow

	Max. Flow Rate, gpm								Overall
Max. Flow Rate, gpm	@ 80 ft. of Head	@ 120 ft. of Head	@ 160 ft. of Head	Maximum Viscosity	Air Consumption, cfm	Air Connection	Intake Pipe Connection (NPT)	Discharge Pipe Connection (NPT)	Lg.	Wd.	Ht.		Each
289 Max. ft. of Head—125 psi Max. Discharge Pressure
70	47	35	20	Not Rated	50	1/2 Female	1 Female	1 Female	11"	17"	16"	0000000	000000000
140	120	96	77	Not Rated	150	3/4 Female	2 Female	2 Female	14"	22"	20"	0000000	00000000

Air-Motor Maintenance Kit for 8090K13	Each	0000000
Fluid-Side Maintenance Kit for 8090K13	Each	00000000
Air-Motor Maintenance Kit for 8090K25	Each	000000
Fluid-Side Maintenance Kit for 8090K25	Each	00000000

316 Stainless Steel Air-Powered Transfer Pumps
for Oil, Chemicals, Fuel, and Large Solids

With a 316 stainless steel housing and a fluoroelastomer diaphragm, these pumps resist a variety of harsh acids and alkalies, such as phosphoric acid, nitric acid, and sulfuric acid. They have large internal pathways and check valves with flaps to accommodate thick sewage, abrasive slurries, and industrial waste with large solids that would damage standard air-powered transfer pumps. All are self-priming, which means they create a suction force to draw liquid upward to fill the pump chamber. Pumps are submersible and can run dry.

Fluid-side maintenance kits include diaphragms, check valve balls, and seals.

Air-motor maintenance kits include seals, O-rings, gaskets, retaining rings, and an air valve spool.

With NPT Threaded Top Intake and Bottom Discharge

	Max. Flow Rate, gpm								Overall
Max. Flow Rate, gpm	@ 80 ft. of Head	@ 120 ft. of Head	@ 160 ft. of Head	Max. Viscosity	Air Consumption, cfm	Air Connection (NPT)	Intake Pipe Connection (NPT)	Discharge Pipe Connection (NPT)	Lg.	Wd.	Ht.		Each
289 ft. of Head—125 psi Max. Discharge Pressure
70	47	35	20	Not Rated	50	1/2 Female	1 Female	1 Female	11"	17"	16"	0000000	000000000

Fluid-Side Maintenance Kits	0000000	Each	000000000
Air-Motor Maintenance Kits	0000000	Each	000000

Compact Air-Powered Transfer Pumps

Small enough to fit in the palm of your hand, these pumps transfer water, detergents, and chemicals. They have a chemical-resistant polypropylene housing. Pumps are self-priming, which means they create a suction force to draw liquid upward to fill the pump chamber. Pumps can run dry.

Pumps with fluoroelastomer diaphragm are also suitable for use with fuel and oil.

With Bottom Intake and Bottom Discharge

	Max. Flow Rate, gpm										Overall
Max. Flow Rate, gpm	@ 1 ft. of Head	@ 3 ft. of Head	@ 4 ft. of Head	@ 5 ft. of Head	Max. Viscosity, cP	Air Consumption, cfm	Air Connection ID	Intake Tube Connection	Discharge Tube connection	Diaphragm Material	Lg.	Wd.	Ht.		Each
15 ft. of Head—100 psi Max. Discharge Pressure
5	5	3.7	2.9	1.8	700	1.75	1/4" Male	1/2" Male	1/2" Male	Fluoroelastomer Rubber	4 9/16"	1 13/16"	5 13/16"	0000000	0000000

Air-Powered Constant-Flow-Rate Pumps

Commonly called piston pumps, these are often used in high-pressure applications, such as hydrostatic testing of pipelines, tanks, and valves. Flow and outlet liquid pressure can be controlled by varying the air pressure. To calculate discharge liquid pressure, multiply the air pressure by the ratio shown in the table. Pumps are self-priming, which means they create a suction force to draw liquid upward to fill the pump chamber.

Note: Pumps must be filled with liquid before use. They need a constant flow of liquid and cannot run dry.

For technical drawings and 3-D models, click on a part number.

Flow Rate, gpm				Air Pressure, psi						Overall
@ 0 psi	Max. ft. of Head	Max. Discharge Pressure, psi	Max. Viscosity, cP	Min.	Max.	Air Consumption, scfm	Air Connection (NPT)	Intake Pipe Connection (NPT)	Discharge Pipe Connection (NPT)	Lg.	Wd.	Ht.		Each
11:1 Discharge Liquid to Inlet Air Pressure Ratio
4.76	3,679	1,595	100	15	145	45	1/2 Female	1 Female	1/2 Female	10 3/4"	7"	12 1/4"	0000000	000000000

PVDF Extended-Life Air-Powered Drum Pumps for Chemicals

A chemical- and impact-resistant PVDF housing stands up to aggressive chemicals such as methyl ethyl ketone (MEK) and xylene. Also known as diaphragm pumps, they have few moving parts that can fail for a long service life. Install an air line filter/lubricator to ensure efficiency and reduce wear on the pump.

Repair kits include O-rings, valves, and diaphragms.

			Temp. Range, °F					Air Connection			Intake				Discharge
Flow Rate, gpm	For Container Size, gal.	Max. Viscosity, cP	Min.	Max.	Air Pressure, psi	Air Consumption, cfm	For Drum Opening Size	Pipe Size	Gender	Thread Type	Pipe Size	Gender	Thread Type	Tube Lg.	Pipe Size	Gender	Thread Type		Each
13	55	3,000	40°	210°	100	12	2 NPT	1/4	Female	NPT	1/2	Female	NPT	36"	1/2	Female	NPT	0000000	000000000

Repair Kit

00000000

Each

0000000

Aluminum Extended-Life Air-Powered Drum Pumps for Fuel

Pump fuel such as gasoline, kerosene, and diesel fuel. Also known as diaphragm pumps, these pumps have few moving parts that can fail for a long service life. Install an air line filter/lubricator to ensure efficiency and reduce wear on the pump.

Always bond and ground your application for static control. For more information about bonding and grounding, see Sections 1910.106 and 1910.107 of the Federal OSHA Code or see bonding and grounding equipment.

Repair kits include balls, O-rings, and diaphragms.

			Temp. Range, °F					Air Connection			Intake				Discharge
Flow Rate, gpm	For Container Size, gal.	Max. Viscosity, cP	Min.	Max.	Air Pressure, psi	Air Consumption, cfm	For Drum Opening Size	Pipe Size	Gender	Thread Type	Pipe Size	Gender	Thread Type	Tube Lg.	Pipe Size	Gender	Thread Type		Each
28	55	8,000	40°	210°	100	40	2 NPT	1/4	Female	NPT	3/4	Female	NPT	39"	3/4	Female	NPT	0000000	000000000

Repair Kit

00000000

Each

0000000

High-Pressure Air-Powered Drum Pumps for Fuel and Flammable Liquid

Use these pumps with fuel and flammable liquids, such as acetone, ethanol, and gasoline. They handle nearly twice the amount of pressure as other air-powered drum pumps to move high-viscosity liquids. Install an air line filter/lubricator to ensure efficiency and reduce wear on the pump.

			Temp. Range, °F						Air Connection			Intake		Discharge
Flow Rate, gpm	For Container Size, gal.	Max. Viscosity, cP	Min.	Max.	Air Pressure Range, psi	Air Consumption, cfm	For Drum Opening Size	Includes	Pipe Size	Gender	Thread Type	Tube OD	Tube Lg.	Pipe Size	Gender	Thread Type		Each
4	55	7,500	40°	200°	0-150	10	2 NPT	Drum Connector	1/4	Female	NPT	2 1/8"	33 11/16"	3/4	Female	NPT	0000000	000000000

Selectable-Flow-Rate Easy-Stroke Drum Pumps for Water and Chemicals

With Stainless Steel Intake Tube and Housing

These pumps have a selectable flow rate, so you can adjust flow for different dispensing applications. A lever handle maximizes output with each stroke for low-effort dispensing.

Whenever working with flammable liquids, always bond and ground your application for static control. For more information about bonding and grounding, see Sections 1910.106 and 1910.107 of the Federal OSHA Code or see bonding and grounding equipment.

			Temp. Range, °F				Intake
Flow Rate, oz./stroke	For Container Size, gal.	Max. Viscosity, cP	Min.	Max.	For Drum Opening Size	Includes	Tube OD	Tube Lg.	For Discharge Tube ID	Spout Type		Each
Stainless Steel Intake Tube and Housing
6, 8, 10, 12	15-55	2,000	Not Rated	140°	1 1/2 NPT, 2 NPT	Drum Connector	1 1/8"	18 1/2"-32 1/2"	11/16"	Removable	0000000	0000000

Drum Pumps for Water and Chemicals

Push the plunger to pump water, cleaners, and chemicals.

Styles C-F are rated for liquids up to 2,500 centipoise.

Style E

			Temp. Range, °F				Intake		Discharge
Flow Rate, oz./stroke	For Container Size, gal.	Max. Viscosity, cP	Min.	Max.	For Drum Opening Size	Includes	Tube OD	Tube Lg.	Tube ID	Tube OD	Tube Lg.		Each
5	5-55	2,500	35°	120°	2 NPT	Drum Connector	9/16"	36"	7/16"	9/16"	9"	0000000	000000

Style F

Pumps
			Temp. Range, °F				Intake		Discharge					Optional 2 5/8" Buttress Connectors		Replacement 2 NPT Connectors
Flow Rate, oz./stroke	For Container Size, gal.	Max. Viscosity, cP	Min.	Max.	For Drum Opening Size	Includes	Tube OD	Tube Lg.	Tube ID	Tube OD	Tube Lg.		Each		Each		Each
Viton® Fluoroelastomer Rubber Piston
28	55	2,500	35°	120°	2 NPT	Drum Connector	1 1/2"	38"	1 1/4"	1 1/2"	36"	0000000	0000000	0000000	000000	0000000	000000
28	55	2,500	35°	120°	2 NPT	Drum Connector	1 1/2"	38"	1 1/4"	1 1/2"	72"	0000000	000000	0000000	00000	0000000	00000

Drum Pumps for Harsh Chemicals

With Spout End

With Nozzle

Made with PTFE components, these pumps stand up to aggressive chemicals our other drum pumps can't, such as hydrochloric acid, bleach, sodium hydroxide, and methyl ethyl ketone (MEK). A stopcock prevents fluid and vapor from leaking after use.

			Temp. Range, °F				Intake
Flow Rate, oz./stroke	For Container Size, gal.	Max. Viscosity, cP	Min.	Max.	For Drum Opening Size	Includes	Tube OD	Tube Lg.		Each
With Spout End
9	16	500	35°	105°	2"	Drum Connector	1 1/4"	23 5/8"	000000	000000000
With Nozzle
9	16	500	35°	105°	2"	Drum Connector	1 1/4"	23 5/8"	000000	00000000

Drum Pumps for Fuel and Flammable Liquid

All of these pumps have bonding and grounding wires, while some also have an internal flame arrester, to pump fuel, cleaning solvents, and lacquer thinners.

Steel pumps work with fuels and flammable liquids, but not especially aggressive and corrosive chemicals.

Stainless steel pumps handle aggressive and corrosive liquids that steel pumps cannot.

Pumps for 5-gallon containers have a drum connector that fits Rieke flex spouts and four screw cap adapters: 1 3/4", 2 1/8", 2 1/4", and 2 7/8".

Repair kits include components such as extension tubes, gaskets, and pistons.

						Intake
Flow Rate, oz./stroke	For Container Size, gal.	Max. Viscosity, cP	Max. Temp.	For Drum Opening Size	Includes	Tube OD	Tube Lg.	Features		Each
Steel
4	5	110	Not Rated	1 3/4", 2 1/4", 2 1/8", 2 7/8"	Drum Connector, Flex Spout Adapter, Four Screw Cap Adapters	1/2"	16"	Bonding and Grounding Wires, Internal Flame Arrester	0000000	0000000
4	5	650	Not Rated	1 3/4", 2 1/4", 2 1/8", 2 7/8"	Drum Connector, Flex Spout Adapter, Four Screw Cap Adapters	1 1/8"	15"	Bonding and Grounding Wires, Internal Flame Arrester	0000000	000000
8	15-55	650	Not Rated	2 NPT	Drum Connector	9/16"	16"-38"	Bonding and Grounding Wires, Internal Flame Arrester	0000000	000000
8	55	110	Not Rated	2 NPT	Drum Connector	1/2"	22"	Bonding and Grounding Wires, Internal Flame Arrester	0000000	000000
316 Stainless Steel
10	5-7	650	140° F	2 5/8", 2"	Drum Connector	1 1/2"	18"	Bonding and Grounding Wires	0000000	000000
20	30-55	650	140° F	2"	Drum Connector	1 1/2"	37 1/2"	Bonding and Grounding Wires	0000000	000000

Repair Kit for Steel Pumps with 110 cP Max. Viscosity	0000000	Each	0000000
Repair Kit for Steel Pumps with 650 cP Max. Viscosity	0000000	Each	000000

Easy-Stroke Drum Pumps with Nozzle for Fuel

A nozzle and hose allow you to dispense directly into your container. The lever handle maximizes output with each stroke for low-effort dispensing. The handle delivers fluid on both the forward and backward strokes to quickly move drum contents. Lock the handle with a padlock (not included). Flow is reversible.

Add a metering nozzle to record flow rate for batches and total volume. The batch meter is resettable and registers up to 99.9 gallons. The meter for total volume is nonresettable and registers up to 99,999.99 gallons.

Repair kits include components such as gaskets, valve assemblies, and piston rings.

			Temp. Range, °F			Intake		Discharge
Flow Rate, oz./stroke	For Container Size, gal.	Max. Viscosity, cP	Min.	Max.	For Drum Opening Size	Tube OD	Tube Lg.	Hose OD	Hose Lg., ft.	Max. Shackle Dia.		Each
Pumps
26	15-55	319	-15°	150°	2 NPT	1"	20"-35"	5/8"	8	1/4"	0000000	0000000

Metering Nozzle	Each	0000000
Replacement Hose	Each	00000
Replacement Telescoping Intake Tube	Each	00000
Repair Kit	Each	00000
Replacement Nozzle	Each	00000

Easy-Stroke Drum Pumps for Fuel

For low-effort dispensing, a lever handle maximizes output with each stroke. The handle delivers fluid on both the forward and backward strokes to quickly move drum contents. Lock the handle with a padlock (not included). Flow is reversible.

Repair kits include components such as gaskets, valve assemblies,and piston rings.

			Temp. Range, °F			Intake
Flow Rate, oz./stroke	For Container Size, gal.	Max. Viscosity, cP	Min.	Max.	For Drum Opening Size	Tube OD	Tube Lg.	Spout Type	Max. Shackle Dia.		Each
26	15-55	319	-15°	150°	2 NPT	1"	20"-35"	Removable	1/4"	0000000	0000000

Replacement Telescoping Intake Tube	0000000	Each	000000
Repair Kit	0000000	Each	00000

Deep-Reach Suction Pumps for Fuel

Remove liquid from hard-to-reach areas with a long, flexible intake tube that extends into deep and hard-to-access tanks.

Pumps with a PVC housing have a handle that acts as a siphon when fully extended.

Pumps with a brass housing come with 1/4" and 5/16" ID dipstick probes for engine and gear box use.

		Temp. Range, °F		Intake		Discharge
Flow Rate, oz./stroke	Max. Viscosity, cP	Min.	Max.	Tube OD	Tube Lg.	Tube ID	Tube OD	Tube Lg.		Each
PVC Plastic Housing
4	2,500	35°	120°	9/16"	72"	7/16"	9/16"	36"	0000000	000000
Brass Housing
5	500	40°	140°	3/4"	36"	1/2"	3/4"	36"	0000000	000000

Quick-Dispensing Drum Pumps with Nozzle for Fuel

These pumps have a 3/4" ID discharge hose for transfer applications and a vacuum breaker that drains the hose to prevent siphoning. A lever handle delivers fluid on both the forward and backward strokes for faster dispensing than other drum pumps. The handle can be mounted with the knob above or below the pump body. Lock the handle with a padlock (not included).

Repair kits include a gasket, a piston ring, O-rings, and valves.

			Temp. Range, °F				Intake		Discharge (Hose and Nozzle)
Flow Rate, oz./stroke	For Container Size, gal.	Max. Viscosity, cP	Min.	Max.	For Drum Opening Size	Includes	Tube OD	Tube Lg.	Hose ID	Hose Lg., ft.	Max. Shackle Dia.		Each
32	55	410	Not Rated	70°	2 NPT	Drum Connector, Vacuum Breaker	1 5/16"	34"	3/4"	8	1/4"	0000000	0000000

Replacement Drum Connector	Each	000000
Replacement Hose	Each	00000
Repair Kit	Each	00000

Quick-Dispensing Drum Pumps for Fuel

A lever handle delivers fluid on both the forward and backward strokes for faster dispensing than other drum pumps. The handle can be mounted with the knob above or below the pump body. Lock the handle with a padlock (not included).

Repair kits include a gasket, a piston ring, O-rings, and valves.

			Temp. Range, °F				Intake
Flow Rate, oz./stroke	For Container Size, gal.	Max. Viscosity, cP	Min.	Max.	For Drum Opening Size	Includes	Tube OD	Tube Lg.	Discharge Location	For Discharge Hose ID	Spout Type	Max. Shackle Dia.		Each
32	55	410	Not Rated	70°	2 NPT	Drum Connector	1 5/16"	34"	Spout End, Pump Body	3/4"	Removable	1/4"	0000000	0000000

Replacement Drum Connector	0000000	Each	000000
Repair Kit	0000000	Each	00000

Nondrip Drum Pumps for Fuel and Flammable Liquid

Remote Tap Kit

Eliminate leaks and waste with a faucet-style nondrip nozzle that quickly starts and stops flow. Pressurize your container with a few pumps of the plunger handle, and use the one-touch nozzle to manage flow. Hold down the nozzle for intermittent dispensing, open the nozzle fully for continuous flow, and close the nozzle to stop flow entirely.

Remote tap kits extend your pump's reach for transferring liquid to tanks, mixers, and sprayers. They include a splash guard, a 6-ft. PVC tube, and hardware.

Pumps
			Temp. Range, °F				Intake				Remote Tap Kits
Flow Rate, gpm	For Container Size, gal.	Max. Viscosity, cP	Min.	Max.	For Drum Opening Size	Includes	Tube OD	Tube Lg.		Each		Each
4.5	2-55	270	35°	110°	2 NPT	Drum Connector	5/8"	40"	0000000	0000000	0000000	0000000

Drum Pumps for Oil

Use these pumps to move lubricating oil, such as motor oil. Spout is removable and can be replaced with a garden hose.

			Temp. Range, °F				Intake
Flow Rate, oz./stroke	For Container Size, gal.	Max. Viscosity, cP	Min.	Max.	For Drum Opening Size	Includes	Tube OD	Tube Lg.	Spout Type	Drum Pump Type		Each
16	15-55	316	50°	110°	2 NPT	Drum Connector	1 1/2"	37"	Removable	Plunger	0000000	000000

Siphon Drum Pumps

Since these pumps use suction to draw liquid out of your container, they continue dispensing once you get them started. They're often used with coolant and water.

Adjust pumps with a 5-7 gpm flow rate for different dispensing applications.

Pumps

				Temp. Range, °F				Intake		Discharge
	Flow Rate, gpm	For Container Size, gal.	Max. Viscosity, cP	Min.	Max.	For Drum Opening Size	Includes	Tube OD	Tube Lg.	Tube ID	Tube OD	Tube Lg.		Each
B	5-7	5	650	Not Rated	140°	2 NPS, 70 mm	Drum Connector	1 1/2"	16"	1"	1 1/4"	60"	0000000	000000
B	5-7	5-6	650	Not Rated	140°	2 NPS	Drum Connector	1 1/2"	16"	1"	1 1/4"	60"	0000000	00000
B	5-7	15	650	Not Rated	140°	2 NPS	Drum Connector	1 1/2"	24"	1"	1 1/4"	60"	0000000	00000

Optional Connectors for Style B

Connector

For Drum Opening Size	Thread Size	Thread Type		Each
2 NPS	M56	Buttress	0000000	000000
2 NPS	M63	Buttress	0000000	00000
2 NPS	M66	Buttress	0000000	00000
2 NPS	M70	Buttress	0000000	00000

PTFE Air-Powered Transfer Pumps for Harsh Chemicals

316 Stainless Steel Air-Powered Transfer Pumpsfor Chemicals, Fuel, and Flammable Liquids

Aluminum Air-Powered Transfer Pumps for Oil, Chemicals, and Fuel

Aluminum Air-Powered Transfer Pumps for Oil and Chemicals

Plastic Air-Powered Transfer Pumps for Fuel and Flammable Liquids

Aluminum Air-Powered Transfer Pumps for Fuel and Flammable Liquids

Aluminum Air-Powered Transfer Pumps for Fuel, Oil, and Large Solids

316 Stainless Steel Air-Powered Transfer Pumpsfor Oil, Chemicals, Fuel, and Large Solids

Compact Air-Powered Transfer Pumps

Air-Powered Constant-Flow-Rate Pumps

PVDF Extended-Life Air-Powered Drum Pumps for Chemicals

Aluminum Extended-Life Air-Powered Drum Pumps for Fuel

High-Pressure Air-Powered Drum Pumps for Fuel and Flammable Liquid

Selectable-Flow-Rate Easy-Stroke Drum Pumps for Water and Chemicals

Drum Pumps for Water and Chemicals

Drum Pumps for Harsh Chemicals

Drum Pumps for Fuel and Flammable Liquid

Easy-Stroke Drum Pumps with Nozzle for Fuel

Easy-Stroke Drum Pumps for Fuel

Deep-Reach Suction Pumps for Fuel

Quick-Dispensing Drum Pumps with Nozzle for Fuel

Quick-Dispensing Drum Pumps for Fuel

Nondrip Drum Pumps for Fuel and Flammable Liquid

Drum Pumps for Oil

Siphon Drum Pumps

316 Stainless Steel Air-Powered Transfer Pumps
for Chemicals, Fuel, and Flammable Liquids

316 Stainless Steel Air-Powered Transfer Pumps
for Oil, Chemicals, Fuel, and Large Solids