For Use With For Use With |
|---|
Flow Rate Flow Rate |
|---|
Pump Type Pump Type |
|---|
|
Housing Material Housing Material |
|---|
|
|
Handle Type Handle Type |
|---|
|
Discharge Location Discharge Location |
|---|
|
Intake Tube Length Intake Tube Length |
|---|
|
|
Maximum Viscosity Maximum Viscosity |
|---|
|
|
Nozzle Type Nozzle Type |
|---|
|
Intake Tube Type Intake Tube Type |
|---|
|
How to Prime Your Pump
More
How to Determine Feet of Head
More
About Process Pumps
More
About Drum Pumps
More
Quick-Dispensing Drum Pumps for Fuel
A lever handle delivers fluid on both the forward and backward strokes for faster dispensing than other drum pumps. The handle can be mounted with the knob above or below the pump body. Lock the handle with a padlock (not included).
Always bond and ground your application for static control. For more information about bonding and grounding, see Sections 1910.106 and 1910.107 of the Federal OSHA Code or see bonding and grounding equipment.
Repair kits include a gasket, a piston ring, O-rings, and valves.
Temp. Range, °F | Intake | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Flow Rate, oz./stroke | For Container Size, gal. | Max. Viscosity, cP | Min. | Max. | For Drum Opening Size | Includes | Tube OD | Tube Lg. | Discharge Location | For Discharge Hose ID | Spout Type | Max. Shackle Dia. | Each | |
| 32 | 55 | 410 | Not Rated | 70° | 2 NPT | Drum Connector | 1 5/16" | 34" | Spout End, Pump Body | 3/4" | Removable | 1/4" | 0000000 | 0000000 |
Quick-Dispensing Drum Pumps with Nozzle for Fuel
These pumps have a 3/4" ID discharge hose for transfer applications and a vacuum breaker that drains the hose to prevent siphoning. A lever handle delivers fluid on both the forward and backward strokes for faster dispensing than other drum pumps. The handle can be mounted with the knob above or below the pump body. Lock the handle with a padlock (not included).
Always bond and ground your application for static control. For more information about bonding and grounding, see Sections 1910.106 and 1910.107 of the Federal OSHA Code or see bonding and grounding equipment.
Repair kits include a gasket, a piston ring, O-rings, and valves.
Temp. Range, °F | Intake | Discharge (Hose and Nozzle) | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Flow Rate, oz./stroke | For Container Size, gal. | Max. Viscosity, cP | Min. | Max. | For Drum Opening Size | Includes | Tube OD | Tube Lg. | Hose ID | Hose Lg., ft. | Max. Shackle Dia. | Each | |
| 32 | 55 | 410 | Not Rated | 70° | 2 NPT | Drum Connector, Vacuum Breaker | 1 5/16" | 34" | 3/4" | 8 | 1/4" | 0000000 | 0000000 |
Deep-Reach Suction Pumps for Fuel
Remove liquid from hard-to-reach areas with a long, flexible intake tube that extends into deep and hard-to-access tanks.
Always bond and ground your application for static control. For more information about bonding and grounding, see Sections 1910.106 and 1910.107 of the Federal OSHA Code or see bonding and grounding equipment.
Pumps with a PVC housing have a handle that acts as a siphon when fully extended.
Pumps with a brass housing come with 1/4" and 5/16" ID dipstick probes for engine and gear box use.
Smooth-Flow Drum Pumps for Fuel
Rotate the handle to dispense a continuous flow of liquid. These pumps are rated for use with Class I and II flammable and combustible fuels.
Always bond and ground your application for static control. For more information about bonding and grounding, see Sections 1910.106 and 1910.107 of the Federal OSHA Code or see bonding and grounding equipment.
Pumps with removable spout allow you to replace the spout with a 1" ID discharge tube for transfer applications.
Temp. Range, °F | Intake | Discharge (Hose and Nozzle) | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Flow Rate, oz./stroke | For Container Size, gal. | Max. Viscosity, cP | Min. | Max. | For Drum Opening Size | Includes | Tube OD | Tube Lg. | Hose OD | Hose Lg., ft. | Features | Each | |
| 12.8 | 15-55 | 319 | -15° | 150° | 2 NPT | Drum Connector | 1" | 20"-35" | 5/8" | 8 | Bonding and Grounding Wires, Nozzle Hanger, Strainer, Vacuum Breaker | 0000000 | 0000000 |
Temp. Range, °F | Intake | Discharge (Spout End) | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Flow Rate, oz./stroke | For Container Size, gal. | Max. Viscosity, cP | Min. | Max. | For Drum Opening Size | Includes | Tube OD | Tube Lg. | Pipe Size | Thread Type | Gender | Features | Each | |
| 11 | 55 | 420 | Not Rated | 300° | 2 NPT | Drum Connector | 3/4" | 22"-40" | 3/4 | NPT | Male | Drip Pan, Internal Flame Arrester, Strainer | 0000000 | 0000000 |
Temp. Range, °F | Intake | Discharge (Hose and Nozzle) | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Flow Rate, oz./stroke | For Container Size, gal. | Max. Viscosity, cP | Min. | Max. | For Drum Opening Size | Includes | Tube OD | Tube Lg. | Hose OD | Hose Lg., ft. | Features | Each | |
| 11 | 55 | 420 | Not Rated | 300° | 2 NPT | Drum Connector | 3/4" | 22"-40" | 3/4" | 8 | Internal Flame Arrester, Nozzle Hanger, Strainer, Vacuum Breaker | 0000000 | 0000000 |
Drum Pumps for Fuel and Flammable Liquid
These pumps have an internal flame arrester and bonding and grounding wires to pump fuel, cleaning solvents, and lacquer thinners.
Always bond and ground your application for static control. For more information about bonding and grounding, see Sections 1910.106 and 1910.107 of the Federal OSHA Code or see bonding and grounding equipment.
Pumps for 5-gallon containers have a clamped connector (fits Rieke Flex Spout) and four threaded screw cap adapters: 1 3/4", 2 1/8", 2 1/4", and 2 7/8".
Repair kits include components such as extension tubes, gaskets, and pistons.
Intake | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| Flow Rate, oz./stroke | For Container Size, gal. | Max. Viscosity, cP | Temp. Range | For Drum Opening Size | Includes | Tube OD | Tube Lg. | Each | |
| 4 | 5 | 650 | Not Rated | 1 3/4", 2 1/8", 2 1/4", 2 7/8" | Clamped Connector, Four Screw Cap Adapters | 1 1/8" | 15" | 0000000 | 0000000 |
| 8 | 15-55 | 650 | Not Rated | 2 NPT | Drum Connector | 9/16" | 16"-38" | 0000000 | 000000 |
| Repair Kit | 0000000 | Each | 0000000 |
Easy-Stroke Drum Pumps with Nozzle for Fuel
A nozzle and hose allow you to dispense directly into your container. The lever handle maximizes output with each stroke for low-effort dispensing. The handle delivers fluid on both the forward and backward strokes to quickly move drum contents. Lock the handle with a padlock (not included). Flow is reversible.
Always bond and ground your application for static control. For more information about bonding and grounding, see Sections 1910.106 and 1910.107 of the Federal OSHA Code or see bonding and grounding equipment.
Pumps with metering nozzle record flow rate for batches and total volume. The batch meter is resettable and registers up to 99.9 gallons. The meter for total volume is nonresettable and registers up to 99,999.99 gallons.
Repair kits include components such as gaskets, valve assemblies, and piston rings.
Temp. Range, °F | Intake | Discharge | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Flow Rate, oz./stroke | For Container Size, gal. | Max. Viscosity, cP | Min. | Max. | For Drum Opening Size | Includes | Tube OD | Tube Lg. | Hose OD | Hose Lg., ft. | Max. Shackle Dia. | Each | |
Pumps | |||||||||||||
| 26 | 15-55 | 319 | -15° | 150° | 2 NPT | __ | 1" | 20"-35" | 5/8" | 8 | 1/4" | 0000000 | 0000000 |
Pumps with Metering Nozzle | |||||||||||||
| 26 | 15-55 | 319 | -15° | 150° | 2 NPT | Drum Connector | 1" | 20"-35" | 5/8" | 8 | 1/4" | 0000000 | 000000 |
Easy-Stroke Drum Pumps for Fuel
For low-effort dispensing, a lever handle maximizes output with each stroke. The handle delivers fluid on both the forward and backward strokes to quickly move drum contents. Lock the handle with a padlock (not included). Flow is reversible.
Always bond and ground your application for static control. For more information about bonding and grounding, see Sections 1910.106 and 1910.107 of the Federal OSHA Code or see bonding and grounding equipment.
Repair kits include components such as gaskets, valve assemblies,and piston rings.
Drum Pumps for Water and Chemicals
Push the plunger to pump water, cleaners, and chemicals.
Styles C-F are rated for liquids up to 2,500 centipoise.
Temp. Range, °F | Intake | Discharge | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Flow Rate, oz./stroke | For Container Size, gal. | Max. Viscosity, cP | For Use With | Min. | Max. | For Drum Opening Size | Includes | Tube OD | Tube Lg. | Tube ID | Tube OD | Tube Lg. | Each | |
| 5 | 5-55 | 2,500 | Water, Deionized Water, Ethylene Glycol, Bleach, Diesel Fuel, Ethanol, Gasoline, Hydraulic Oil, Hydrochloric Acid, Isopropyl Alcohol, Kerosene, Mineral Spirits, Phosphoric Acid, Salt Water, Sodium Hydroxide, Sulfuric Acid | 35° | 120° | 2 NPT | Drum Connector | 9/16" | 36" | 7/16" | 9/16" | 9" | 0000000 | 000000 |
Portable Battery-Operated Drum Pumps for Diesel Fuel
For on-site diesel fuel dispensing at construction sites, on boats, and in other environments without electrical hookups, attach these portable pumps to any 12-volt battery.
Temp. Range, °F | Intake | Discharge | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Flow Rate, gpm | Discharge Pressure, psi | Max. Viscosity, cP | Min. | Max. | Horsepower | Current, A | Max. Lift, ft. | Includes | Hose Connection Type | For Hose ID | Hose Connection Type | For Hose ID | Features | Each | |
For 12V DC Battery Voltage, Single Phase | |||||||||||||||
| 13 | 21 | 5.3 | 25° | 100° | Not Rated | 18 | 6 | 6 1/2-ft. Battery Cable with Clamps | Barbed | 3/4" | Barbed | 3/4" | Bypass Relief Valve | 00000000 | 0000000 |
Portable Battery-Operated Drum
Pumps with Nozzle for Diesel Fuel
A nozzle and hose allow you to dispense directly into your container. For on-site diesel fuel dispensing at construction sites, on boats, and in other environments without electrical hookups, attach these portable pumps to any 12-volt battery.
Temp. Range, °F | Intake | Discharge (Hose and Nozzle) | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Flow Rate, gpm | Discharge Pressure, psi | Max. Viscosity, cP | Min. | Max. | Horsepower | Current, A | Max. Lift, ft. | Includes | Hose Connection Type | For Hose ID | ID | Lg., ft. | Features | Each | |
For 12V DC Battery Voltage, Single Phase | |||||||||||||||
| 13 | 14 | 5.3 | 25° | 100° | Not Rated | 22 | 6 | 6 1/2-ft. Battery Cable with Clamps | Barbed | 3/4" | 3/4" | 13 | Bypass Relief Valve | 00000000 | 0000000 |
Battery-Operated Drum Pumps with Nozzle for Fuel
Operating on a 12-volt battery, these pumps transfer and drain fuel such as gasoline, diesel fuel, and kerosene. Lock the nozzle with a padlock (not included).
Always bond and ground your application for static control. For more information about bonding and grounding, see Sections 1910.106 and 1910.107 of the Federal OSHA Code or see bonding and grounding equipment.
Pumps with metering nozzle record total volume up to 99,999.9 gallons.
Temp. Range, °F | Intake | Discharge (Hose and Nozzle) | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Flow Rate, gpm | Discharge Pressure, psi | Max. Viscosity, cP | Min. | Max. | Horsepower | Current, A | Max. Lift, ft. | For Drum Opening Size | Includes | Tube OD | Tube Lg. | ID | Lg., ft. | Nozzle Type | Each | |
For 12V DC Battery Voltage, Single Phase—With Thermal Overload Protection | ||||||||||||||||
| 15 | 12 | 30 | -15° | 150° | 1/4 hp | 20 | 8 | 2 NPT | 18-ft. Battery Cable, Drum Connector | 1" | 20"-34 3/4" | 3/4" | 12 | Metering, Manual Shut-Off | 0000000 | 0000000 |
Hazardous-Location High-Flow Battery-Operated
Drum Pumps with Nozzle for Fuel
These pumps are UL listed for use in environments with flammable gases and combustible dust. Operating on a 12-volt battery, use them to transfer and drain fuel such as gasoline, diesel fuel, and kerosene. Lock the nozzle with a padlock (not included).
Always bond and ground your application for static control. For more information about bonding and grounding, see Sections 1910.106 and 1910.107 of the Federal OSHA Code or see bonding and grounding equipment.
Pumps with automatic shut-off nozzle turn off when the tank is full.
Temp. Range, °F | Intake | Discharge (Hose and Nozzle) | |||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Flow Rate, gpm | Discharge Pressure, psi | Max. Viscosity, cP | Min. | Max. | Horsepower | Current, A | Max. Lift, ft. | For Drum Opening Size | Includes | Pipe Size | Gender | Thread Type | ID | Lg., ft. | Nozzle Type | Max. Shackle Dia. | Thermal Protection | Each | |
For 12V DC Battery Voltage | |||||||||||||||||||
| 25 | 20 | 10 | -20° | 125° | 4/10 hp | 35 | 15 | 2 NPT | 15-ft. Battery Cable, Drum Connector | 1 | Female | NPT | 1" | 18 | Automatic Shut-Off, Lockable | 5/16" | With Thermal Overload Protection | 0000000 | 0000000 |
| 25 | 20 | 10 | -20° | 125° | 4/10 hp | 35 | 15 | 2 NPT | 15-ft. Battery Cable, Drum Connector | 1 | Female | NPT | 1" | 18 | Manual Shut-Off, Lockable | 5/16" | With Thermal Overload Protection | 0000000 | 000000 |
Electric Drum Pumps with Nozzle for Fuel
Pump fuel in hazardous environments with flammable gases and combustible dust.
Always bond and ground your application for static control. For more information about bonding and grounding, see Sections 1910.106 and 1910.107 of the Federal OSHA Code or see bonding and grounding equipment.
Style A pumps have a circuit breaker to prevent overload. Pumps with automatic shut-off nozzle turn off when the tank is full.
Style B pumps have a metering nozzle that registers total volume up to 99,999.9 gallons. Lock with a padlock (not included). A bypass valve prevents pressure buildup when the nozzle is closed.
Style C pumps have a steel enclosure that protects the motor from dusty, dirty, and damp environments.
Anti-siphon kit prevents reverse flow with a vacuum breaker and includes all hose, fittings, and seals required for installation. Pedestal kit converts your pump from a drum mount to a pedestal mount.
Temp. Range, °F | Intake | Discharge | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Flow Rate, gpm | Discharge Pressure, psi | Max. Viscosity, cP | Min. | Max. | Horsepower | Current, A | Max. Lift, ft. | For Drum Opening Size | Tube OD | Tube Lg. | Hose ID | Hose Lg., ft. | Hose OD | Nozzle Type | Electrical Connection Type | Each | |
120V AC, Single Phase—With Thermal Overload Protection | |||||||||||||||||
| 9 | 15 | 10 | -20° | 125 | 1/8 hp | 1.5 | 4.8 | 2 NPT | 1 7/16" | 22"-40" | 3/4" | 12 | 1 5/32" | Automatic Shut-Off | Hardwire | 0000000 | 0000000 |
| 12 | 15 | 10 | -20° | 125 | 1/8 hp | 1.5 | 5.5 | 2 NPT | 1 7/16" | 22"-40" | 3/4" | 12 | 1 5/32" | Manual Shut-Off | Hardwire | 0000000 | 000000 |
Temp. Range, °F | Intake | Discharge | |||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Flow Rate, gpm | Discharge Pressure, psi | Max. Viscosity, cP | Min. | Max. | Horsepower | Current, A | Max.Lift, ft. | For Drum Opening Size | Gender | Pipe Size | Thread Type | Hose ID | Hose Lg., ft. | Hose OD | Nozzle Type | Max. Shackle Dia. | Electrical Connection Type | Each | |
120V AC, Single Phase—With Thermal Overload Protection | |||||||||||||||||||
| 20 | 22 | 10 | -40° | 150 | 1/3 hp | 5.5 | 10 | 2 NPT | Female | 1 1/4 | NPT | 3/4" | 12 | 1 1/8" | Lockable, Manual Shut-Off, Metering | 3/8" | Hardwire | 0000000 | 0000000 |
Temp. Range, °F | Intake | Discharge | |||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Flow Rate, gpm | Discharge Pressure, psi | Max. Viscosity, cP | Min. | Max. | Horsepower | Current, A | Max.Lift, ft. | For Drum Opening Size | Gender | Pipe Size | Thread Type | Hose ID | Hose Lg., ft. | Hose OD | Nozzle Type | Max. Shackle Dia. | Electrical Connection Type | Each | |
120V AC, Single Phase—With Thermal Overload Protection | |||||||||||||||||||
| 18 | 22 | 10 | -40° | 150 | 1/3 hp | 5.5 | 10 | 2 NPT | Female | 1 1/4 | NPT | 3/4" | 12 | 1 1/8" | Lockable, Manual Shut-Off, Metering | 3/8" | Hardwire | 0000000 | 000000000 |
High-Pressure Air-Powered Drum
Pumps for Fuel and Flammable Liquid
Use these pumps with fuel and flammable liquids, such as acetone, ethanol, and gasoline. They handle nearly twice the amount of pressure as other air-powered drum pumps to move high-viscosity liquids. Install an air line filter/lubricator to ensure efficiency and reduce wear on the pump.
Always bond and ground your application for static control. For more information about bonding and grounding, see Sections 1910.106 and 1910.107 of the Federal OSHA Code or see bonding and grounding equipment.
Temp. Range, °F | Air Connection | Intake | Discharge | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Flow Rate, gpm | For Container Size, gal. | Max. Viscosity, cP | Min. | Max. | Air Pressure Range, psi | Air Consumption, cfm | For Drum Opening Size | Includes | Pipe Size | Gender | Thread Type | Tube OD | Tube Lg. | Pipe Size | Gender | Thread Type | Each | |
| 4 | 55 | 7,500 | 40° | 200° | 0-150 | 10 | 2 NPT | Drum Connector | 1/4 | Female | NPT | 2 1/8" | 33 11/16" | 3/4 | Female | NPT | 0000000 | 000000000 |
Drum-Pressurizing Air-Powered Drum Pumps with Nozzle
With a nozzle and hose, these pumps allow you to dispense directly into your container. They move liquid by pressurizing the drum, so they have few moving parts prone to wear and tear. They are often used with fuel and lubricating oil. Install an air line filter/lubricator to ensure efficiency and reduce wear on the pump. Pumps come set at 6 psi.
Temp. Range, °F | Air Connection | Intake | Discharge (Hose and Nozzle) | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Flow Rate, gpm | For Container Size, gal. | Max. Viscosity, cP | Min. | Max. | Air Pressure Range, psi | Air Consumption, cfm | For Drum Opening Size | Includes | Pipe Size | Gender | Thread Type | Tube OD | Tube Lg. | ID | Lg., ft. | Each | |
| 18 | 55 | 1,200 | Not Rated | 140° | 10-120 | 6 | 2 NPT | Air Hose Quick-Connect Coupling | 1/4 | Female | NPT | 1 1/4" | 21"-36" | 3/4" | 8 | 0000000 | 0000000 |
| Replacement Hose with Nozzle | 000000 | Each | 0000000 |
Air-Powered Drum Pumps for Flammable Liquid
These pumps are rated for Zone 0 hazardous locations with flammable gases and vapors, so they can be used with liquids such as acetone, ethanol, methyl ethyl ketone (MEK), xylene, and mineral spirits. Pumps have a nonsparking motor for use in applications where electricity is unavailable or dangerous. Install an air line filter/lubricator to ensure efficiency and reduce wear on the pump.
Always bond and ground your application for static control. For more information about bonding and grounding, see Sections 1910.106 and 1910.107 of the Federal OSHA Code or see bonding and grounding equipment.
Temp. Range, °F | Air Connection | Intake | Discharge | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Flow Rate, gpm | For Container Size, gal. | Max. Viscosity, cP | Min. | Max. | Air Pressure Range, psi | Air Consumption, cfm | For Drum Opening Size | Includes | Pipe Size | Gender | Thread Type | Tube OD | Tube Lg. | Tube Connection Type | For Tube ID | Each | |
| 26 | 55 | 1,100 | -40° | 210° | 44-87 | 53 | 2 NPT | Drum Connector | 3/8 | Female | NPT | 1 5/8" | 39" | Barbed | 1" | 0000000 | 000000000 |
| 26 | 55 | 1,100 | -40° | 210° | 44-87 | 53 | 2 NPT | Drum Connector | 3/8 | Female | NPT | 1 5/8" | 47" | Barbed | 1" | 0000000 | 00000000 |
| 53 | 55 | 1,000 | -40° | 210° | 44-87 | 53 | 2 NPT | Drum Connector | 3/8 | Female | NPT | 1 5/8" | 39" | Barbed | 1" | 0000000 | 00000000 |
| 53 | 55 | 1,000 | -40° | 210° | 44-87 | 53 | 2 NPT | Drum Connector | 3/8 | Female | NPT | 1 5/8" | 47" | Barbed | 1" | 0000000 | 00000000 |
Inline Water-Powered Metering Pumps for Chemicals
Inject chemicals into your water supply without using electricity—these pumps install directly in your pipeline and activate when water flows into the pump head. They provide consistent metering regardless of pressure and flow changes and have an adjustment dial for altering dosing concentration. Pumps are often used with bleach, cleaning solutions, and water-treatment chemicals. All are self-priming and create suction to draw liquid upward. Do not use with solids.
Intake | Discharge | Overall | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Flow Rate, gpm | Max. Pressure, psi | Max. Viscosity, cP | Concentration Ratio | Max. Temp., °F | Pipe Size | Thread Type | Gender | Pipe Size | Thread Type | Gender | Dia. | Ht. | Includes | Each | |
| 0.05-14 | 85 | 200 | 1:500 to 1:50 | 100° | 3/4 | NPT | Male | 3/4 | NPT | Male | 6 5/16" | 19" | 6-ft. PVC Plastic Intake Tube | 0000000 | 0000000 |
| 0.05-14 | 85 | 200 | 1:3,000 to 1:333 | 100° | 3/4 | NPT | Male | 3/4 | NPT | Male | 6 5/16" | 21" | 6-ft. PVC Plastic Intake Tube | 0000000 | 00000000 |
| 0.05-14 | 85 | 1,700 | 1:100 to 1:10 | 100° | 3/4 | NPT | Male | 3/4 | NPT | Male | 6 5/16" | 19" | 6-ft. PVC Plastic Intake Tube | 0000000 | 00000000 |
| 0.05-14 | 85 | 1,700 | 1:200 to 1:20 | 100° | 3/4 | NPT | Male | 3/4 | NPT | Male | 6 5/16" | 19" | 6-ft. PVC Plastic Intake Tube | 0000000 | 00000000 |