DIN 963 Machine Screws | McMaster-Carr

Filter by

Specifications Met

DIN Standard

DIN 963

System of Measurement

Thread Size

Length

Drive Style

Fastener Head Type

Material

Head Diameter

Thread Pitch

Flat Head Profile

Head Height

Countersink Angle

Threading

Thread Type

Thread Direction

Tip Type

Finish

Thread Spacing

Tensile Strength

40,000 psi to 59,999 psi

60,000 psi to 99,999 psi

100,000 psi or greater

Thread Fit

Hardness

DFARS Specialty Metals

Exempt

Not Compliant

Export Control Classification Number (ECCN)

EAR99

RoHS

Compliant

Compliant with Exemptions

Performance

REACH

149 Products

Performance

Corrosion Resistant

Resist corrosion from moisture, chemicals, and harsh weather

113 products

Chemical Resistant

Won't degrade when exposed to most chemicals

24 products

Performance

Conductive

Conduct electricity better than other screws

26 products

Nonmagnetic

Won't damage or interfere with electronics

26 products

Stainless Steel Slotted Flat Head Screws

The most corrosion-resistant slotted flat head screws we offer. Made of stainless steel, they won't rust or corrode when exposed to moisture or chemicals. With only two contact points, the slotted drive is the most basic drive style. The slot can't withstand much torque, so it's best to hand-tighten them instead of using power tools.

Length is measured from the top of the head.

18-8 Stainless Steel—The choice for wet and outdoor environments, these screws won't rust. However, they don't hold up to the harsh chemicals that 316 stainless steel can.

Super-Corrosion-Resistant 316 Stainless Steel—Superior to 18-8 stainless steel, these screws won't degrade when exposed to harsh weather, salt water, and most chemicals.

Standard—Standard-profile heads are the most common choice for flat head screws.

				Head, mm
	Lg., mm	Countersink Angle	Flat Head Profile	Dia.	Ht.	Threading	Tensile Strength, psi	Specs. Met	Pkg. Qty.		Pkg.
18-8 Stainless Steel







				M1 × 0.25 mm

				3	90°	Standard	1.90	0.60	Fully Threaded	70,000	DIN 963	10	000000000	00000


				4	90°	Standard	1.90	0.60	Fully Threaded	70,000	DIN 963	10	000000000	0000




						M1.2 × 0.25 mm

						2	90°	Standard	2.30	0.72	Fully Threaded	70,000	DIN 963	10	000000000	0000


						3	90°	Standard	2.30	0.72	Fully Threaded	70,000	DIN 963	10	000000000	0000
						4	90°	Standard	2.30	0.72	Fully Threaded	70,000	DIN 963	10	000000000	0000




								M1.4 × 0.3 mm

								3	90°	Standard	2.60	0.84	Fully Threaded	70,000	DIN 963	10	000000000	00000


								4	90°	Standard	2.60	0.84	Fully Threaded	70,000	DIN 963	10	000000000	00000




										M1.6 × 0.35 mm

										2	90°	Standard	3.00	0.96	Fully Threaded	70,000	DIN 963	25	000000000	0000


										3	90°	Standard	3.00	0.96	Fully Threaded	70,000	DIN 963	25	000000000	00000
										4	90°	Standard	3.00	0.96	Fully Threaded	70,000	DIN 963, ISO 2009	25	000000000	00000
										5	90°	Standard	3.00	0.96	Fully Threaded	70,000	DIN 963, ISO 2009	25	000000000	00000
										6	90°	Standard	3.00	0.96	Fully Threaded	70,000	DIN 963	25	000000000	0000
										8	90°	Standard	3.00	0.96	Fully Threaded	70,000	DIN 963, ISO 2009	25	000000000	0000
										10	90°	Standard	3.00	0.96	Fully Threaded	70,000	DIN 963, ISO 2009	25	000000000	0000
										12	90°	Standard	3.00	0.96	Fully Threaded	70,000	DIN 963	25	000000000	0000
										16	90°	Standard	3.00	0.96	Fully Threaded	70,000	DIN 963	25	000000000	00000




												M2 × 0.4 mm

												4	90°	Standard	3.80	1.20	Fully Threaded	70,000	DIN 963, ISO 2009	100	000000000	00000


												5	90°	Standard	3.80	1.20	Fully Threaded	70,000	DIN 963, ISO 2009	100	000000000	0000
												6	90°	Standard	3.80	1.20	Fully Threaded	70,000	DIN 963, ISO 2009	100	000000000	0000
												8	90°	Standard	3.80	1.20	Fully Threaded	70,000	DIN 963, ISO 2009	100	000000000	0000
												10	90°	Standard	3.80	1.20	Fully Threaded	70,000	DIN 963, ISO 2009	100	000000000	0000
12												90°	Standard	3.80	1.20	Fully Threaded	70,000	DIN 963, ISO 2009	100	000000000	00000
16	90°											Standard	3.80	1.20	Fully Threaded	70,000	DIN 963, ISO 2009	100	000000000	00000




		M2.5 × 0.45 mm

		4	90°									Standard	4.70	1.50	Fully Threaded	70,000	DIN 963, ISO 2009	100	000000000	00000


		5	90°									Standard	4.70	1.50	Fully Threaded	70,000	DIN 963, ISO 2009	100	000000000	00000
		6	90°									Standard	4.70	1.50	Fully Threaded	70,000	DIN 963, ISO 2009	100	000000000	00000
		8	90°									Standard	4.70	1.50	Fully Threaded	70,000	DIN 963, ISO 2009	100	000000000	00000
		10	90°									Standard	4.70	1.50	Fully Threaded	70,000	DIN 963, ISO 2009	100	000000000	0000
		12	90°									Standard	4.70	1.50	Fully Threaded	70,000	DIN 963, ISO 2009	100	000000000	00000




				M3 × 0.5 mm

				5	90°							Standard	5.60	1.65	Fully Threaded	70,000	DIN 963, ISO 2009	100	000000000	00000


				6	90°							Standard	5.60	1.65	Fully Threaded	70,000	DIN 963, ISO 2009	100	000000000	0000
				8	90°							Standard	5.60	1.65	Fully Threaded	70,000	DIN 963, ISO 2009	100	000000000	0000
				10	90°							Standard	5.60	1.65	Fully Threaded	70,000	DIN 963, ISO 2009	100	000000000	0000
				12	90°	Standard						5.60	1.65	Fully Threaded	70,000	DIN 963, ISO 2009	100	000000000	0000
				16	90°	Standard	5.60					1.65	Fully Threaded	70,000	DIN 963, ISO 2009	100	000000000	0000
				20	90°	Standard	5.60					1.65	Fully Threaded	70,000	DIN 963, ISO 2009	100	000000000	0000




						M4 × 0.7 mm

						6	90°					Standard	7.50	2.20	Fully Threaded	70,000	DIN 963, ISO 2009	100	000000000	0000


						8	90°	Standard	7.50			2.20	Fully Threaded	70,000	DIN 963, ISO 2009	100	000000000	0000
						10	90°	Standard	7.50			2.20	Fully Threaded	70,000	DIN 963, ISO 2009	100	000000000	0000
						12	90°	Standard	7.50			2.20	Fully Threaded	70,000	DIN 963, ISO 2009	100	000000000	0000
						16	90°	Standard	7.50			2.20	Fully Threaded	70,000	DIN 963, ISO 2009	100	000000000	00000
						20	90°	Standard	7.50			2.20	Fully Threaded	70,000	DIN 963, ISO 2009	100	000000000	00000




								M5 × 0.8 mm

								8	90°			Standard	9.20	2.50	Fully Threaded	70,000	DIN 963	50	000000000	0000


								10	90°			Standard	9.20	2.50	Fully Threaded	70,000	DIN 963, ISO 2009	100	000000000	00000
								12	90°			Standard	9.20	2.50	Fully Threaded	70,000	DIN 963, ISO 2009	100	000000000	00000
								16	90°			Standard	9.20	2.50	Fully Threaded	70,000	DIN 963, ISO 2009	100	000000000	00000
								20	90°	Standard		9.20	2.50	Fully Threaded	70,000	DIN 963, ISO 2009	100	000000000	00000
								25	90°	Standard	9.20	2.50	Fully Threaded	70,000	DIN 963, ISO 2009	50	000000000	00000




										M6 × 1 mm

										10	90°	Standard	11.00	3.00	Fully Threaded	70,000	DIN 963, ISO 2009	50	000000000	00000


12										90°	Standard	11.00	3.00	Fully Threaded	70,000	DIN 963, ISO 2009	50	000000000	0000
16	90°									Standard	11.00	3.00	Fully Threaded	70,000	DIN 963, ISO 2009	50	000000000	00000
20	90°									Standard	11.00	3.00	Fully Threaded	70,000	DIN 963, ISO 2009	50	000000000	00000
25	90°									Standard	11.00	3.00	Fully Threaded	70,000	DIN 963, ISO 2009	50	000000000	00000
30	90°									Standard	11.00	3.00	Fully Threaded	70,000	DIN 963, ISO 2009	25	000000000	0000




										M8 × 1.25 mm

										16	90°	Standard	14.50	4.00	Fully Threaded	70,000	DIN 963, ISO 2009	25	000000000	00000


		20								90°	Standard	14.50	4.00	Fully Threaded	70,000	DIN 963, ISO 2009	25	000000000	00000
		25	90°							Standard	14.50	4.00	Fully Threaded	70,000	DIN 963, ISO 2009	25	000000000	00000




										M10 × 1.5 mm

										20	90°	Standard	18.00	5.00	Fully Threaded	70,000	DIN 963	10	000000000	00000


										25	90°	Standard	18.00	5.00	Fully Threaded	70,000	DIN 963	10	000000000	00000
										30	90°	Standard	18.00	5.00	Fully Threaded	70,000	DIN 963	5	000000000	00000




										M12 × 1.75 mm

										25	90°	Standard	22.00	6.00	Fully Threaded	70,000	DIN 963	5	000000000	00000


										30	90°	Standard	22.00	6.00	Fully Threaded	70,000	DIN 963	1	000000000	0000
										35	90°	Standard	22.00	6.00	Fully Threaded	70,000	DIN 963	1	000000000	0000


										Super-Corrosion-Resistant 316 Stainless Steel







												M3 × 0.5 mm

												5	90°	Standard	5.50	1.65	Fully Threaded	100,000	DIN 963	100	000000000	00000


												6	90°	Standard	5.50	1.65	Fully Threaded	100,000	DIN 963	100	000000000	00000
												8	90°	Standard	5.50	1.65	Fully Threaded	100,000	DIN 963	100	000000000	00000
												10	90°	Standard	5.50	1.65	Fully Threaded	100,000	DIN 963	100	000000000	00000
												12	90°	Standard	5.50	1.65	Fully Threaded	100,000	DIN 963	100	000000000	00000




												M4 × 0.7 mm

												6	90°	Standard	7.50	2.20	Fully Threaded	100,000	DIN 963	100	000000000	00000


												8	90°	Standard	7.50	2.20	Fully Threaded	100,000	DIN 963	100	000000000	00000
												10	90°	Standard	7.50	2.20	Fully Threaded	100,000	DIN 963	100	000000000	00000
												12	90°	Standard	7.50	2.20	Fully Threaded	100,000	DIN 963	100	000000000	00000
												16	90°	Standard	7.50	2.20	Fully Threaded	100,000	DIN 963	100	000000000	00000




												M5 × 0.8 mm

												8	90°	Standard	9.20	2.50	Fully Threaded	100,000	DIN 963	50	000000000	00000


												10	90°	Standard	9.20	2.50	Fully Threaded	100,000	DIN 963	50	000000000	00000
												12	90°	Standard	9.20	2.50	Fully Threaded	100,000	DIN 963	50	000000000	00000
												16	90°	Standard	9.20	2.50	Fully Threaded	100,000	DIN 963	50	000000000	00000
		20										90°	Standard	9.20	2.50	Fully Threaded	100,000	DIN 963	50	000000000	00000




												M6 × 1 mm

												12	90°	Standard	11.00	3.00	Fully Threaded	100,000	DIN 963	25	000000000	00000


												16	90°	Standard	11.00	3.00	Fully Threaded	100,000	DIN 963	25	000000000	00000
				20								90°	Standard	11.00	3.00	Fully Threaded	100,000	DIN 963	25	000000000	00000
				25	90°							Standard	11.00	3.00	Fully Threaded	100,000	DIN 963	25	000000000	00000
				30	90°							Standard	11.00	3.00	Fully Threaded	100,000	DIN 963	25	000000000	00000




												M8 × 1.25 mm

												16	90°	Standard	14.50	4.00	Fully Threaded	100,000	DIN 963	10	000000000	00000


										20		90°	Standard	14.50	4.00	Fully Threaded	100,000	DIN 963	10	000000000	00000
										25	90°	Standard	14.50	4.00	Fully Threaded	100,000	DIN 963	10	000000000	00000
										30	90°	Standard	14.50	4.00	Fully Threaded	100,000	DIN 963	10	000000000	00000

Steel Slotted Flat Head Screws

A simple yet effective drive style for light duty tasks. With only two contact points, the slotted drive is the most basic drive style. The slot can't withstand much torque, so it's best to hand-tighten them instead of using power tools.

Length is measured from the top of the head.

Zinc-Plated Steel—A common choice for areas with occasional exposure to moisture.

Standard—Standard-profile heads are the most common choice for flat head screws.

				Head, mm
	Lg., mm	Countersink Angle	Flat Head Profile	Dia.	Ht.	Threading	Tensile Strength, psi	Specs. Met	Pkg. Qty.		Pkg.
Zinc-Plated Steel







				M2 × 0.4 mm

				4	90°	Standard	3.80	1.20	Fully Threaded	60,000	DIN 963, ISO 2009	100	000000000	000000


				5	90°	Standard	3.80	1.20	Fully Threaded	60,000	DIN 963, ISO 2009	100	000000000	0000
				6	90°	Standard	3.80	1.20	Fully Threaded	60,000	DIN 963, ISO 2009	100	000000000	0000




						M3 × 0.5 mm

						5	90°	Standard	5.60	1.65	Fully Threaded	60,000	DIN 963, ISO 2009	100	000000000	0000


						6	90°	Standard	5.60	1.65	Fully Threaded	60,000	DIN 963, ISO 2009	100	000000000	0000
						8	90°	Standard	5.60	1.65	Fully Threaded	60,000	DIN 963, ISO 2009	100	000000000	0000
						10	90°	Standard	5.60	1.65	Fully Threaded	60,000	DIN 963, ISO 2009	100	000000000	0000
						16	90°	Standard	5.60	1.65	Fully Threaded	60,000	DIN 963, ISO 2009	100	000000000	0000




								M4 × 0.7 mm

								5	90°	Standard	7.50	2.20	Fully Threaded	60,000	DIN 963, ISO 2009	100	000000000	00000


								6	90°	Standard	7.50	2.20	Fully Threaded	60,000	DIN 963, ISO 2009	100	000000000	0000
								8	90°	Standard	7.50	2.20	Fully Threaded	60,000	DIN 963, ISO 2009	100	000000000	0000
								10	90°	Standard	7.50	2.20	Fully Threaded	60,000	DIN 963, ISO 2009	100	000000000	0000
								12	90°	Standard	7.50	2.20	Fully Threaded	60,000	DIN 963, ISO 2009	100	000000000	0000
								16	90°	Standard	7.50	2.20	Fully Threaded	60,000	DIN 963, ISO 2009	100	000000000	0000
								20	90°	Standard	7.50	2.20	Fully Threaded	60,000	DIN 963, ISO 2009	100	000000000	0000
								25	90°	Standard	7.50	2.20	Fully Threaded	60,000	DIN 963, ISO 2009	100	000000000	00000
								35	90°	Standard	7.50	2.20	Fully Threaded	60,000	DIN 963, ISO 2009	100	000000000	00000




										M5 × 0.8 mm

										8	90°	Standard	9.20	2.50	Fully Threaded	60,000	DIN 963, ISO 2009	100	000000000	0000


										10	90°	Standard	9.20	2.50	Fully Threaded	60,000	DIN 963, ISO 2009	100	000000000	0000
										12	90°	Standard	9.20	2.50	Fully Threaded	60,000	DIN 963, ISO 2009	100	000000000	0000
										16	90°	Standard	9.20	2.50	Fully Threaded	60,000	DIN 963, ISO 2009	100	000000000	00000
										25	90°	Standard	9.20	2.50	Fully Threaded	60,000	DIN 963, ISO 2009	100	000000000	00000




												M6 × 1 mm

												10	90°	Standard	11.00	3.00	Fully Threaded	60,000	DIN 963, ISO 2009	100	000000000	00000


12	90°											Standard	11.00	3.00	Fully Threaded	60,000	DIN 963, ISO 2009	100	000000000	00000
16	90°											Standard	11.00	3.00	Fully Threaded	60,000	DIN 963, ISO 2009	100	000000000	00000
20	90°											Standard	11.00	3.00	Fully Threaded	60,000	DIN 963, ISO 2009	100	000000000	00000
25	90°	Standard										11.00	3.00	Fully Threaded	60,000	DIN 963, ISO 2009	50	000000000	00000
40	90°	Standard	11.00									3.00	Fully Threaded	60,000	DIN 963, ISO 2009	50	000000000	00000
50	90°	Standard	11.00									3.00	Fully Threaded	60,000	DIN 963, ISO 2009	50	000000000	00000




		M8 × 1.25 mm

		16	90°									Standard	14.50	4.00	Fully Threaded	60,000	DIN 963, ISO 2009	50	000000000	00000


		25	90°	Standard								14.50	4.00	Fully Threaded	60,000	DIN 963, ISO 2009	50	000000000	00000




				M10 × 1.5 mm

				20	90°							Standard	18.00	5.00	Fully Threaded	60,000	DIN 963, ISO 2009	25	000000000	00000


				25	90°							Standard	18.00	5.00	Fully Threaded	60,000	DIN 963, ISO 2009	25	000000000	00000
				30	90°							Standard	18.00	5.00	Fully Threaded	60,000	DIN 963, ISO 2009	10	000000000	0000
				35	90°							Standard	18.00	5.00	Fully Threaded	60,000	DIN 963, ISO 2009	10	000000000	0000
				40	90°							Standard	18.00	5.00	Fully Threaded	60,000	DIN 963, ISO 2009	10	000000000	00000

Brass Slotted Flat Head Screws

Conductive and nonmagnetic, these slotted screws are often used to secure electrical equipment, such as circuit boards, inside enclosures. Made of brass, they also resist corrosion in humid environments. With only two contact points, the slotted drive is the most basic drive style. The slot can't withstand much torque, so it's best to hand-tighten them instead of using power tools.

Length is measured from the top of the head.

Standard—Standard-profile heads are the most common choice for flat head screws.

				Head, mm
	Lg., mm	Countersink Angle	Flat Head Profile	Dia.	Ht.	Threading	Tensile Strength, psi	Specs. Met	Pkg. Qty.		Pkg.
Brass







				M2 × 0.4 mm

				4	90°	Standard	3.80	1.20	Fully Threaded	50,000	DIN 963, ISO 2009	50	000000000	000000


				5	90°	Standard	3.80	1.20	Fully Threaded	50,000	DIN 963, ISO 2009	50	000000000	00000
				6	90°	Standard	3.80	1.20	Fully Threaded	50,000	DIN 963, ISO 2009	50	000000000	00000
				10	90°	Standard	3.80	1.20	Fully Threaded	50,000	DIN 963, ISO 2009	50	000000000	00000
				12	90°	Standard	3.80	1.20	Fully Threaded	50,000	DIN 963, ISO 2009	50	000000000	00000




						M3 × 0.5 mm

						6	90°	Standard	5.50	1.65	Fully Threaded	50,000	DIN 963, ISO 2009	50	000000000	0000


						8	90°	Standard	5.50	1.65	Fully Threaded	50,000	DIN 963, ISO 2009	50	000000000	0000
						10	90°	Standard	5.50	1.65	Fully Threaded	50,000	DIN 963, ISO 2009	50	000000000	0000
						12	90°	Standard	5.50	1.65	Fully Threaded	50,000	DIN 963, ISO 2009	50	000000000	0000
						16	90°	Standard	5.50	1.65	Fully Threaded	50,000	DIN 963, ISO 2009	50	000000000	0000




								M4 × 0.7 mm

								8	90°	Standard	7.50	2.20	Fully Threaded	50,000	DIN 963, ISO 2009	50	000000000	00000


								10	90°	Standard	7.50	2.20	Fully Threaded	50,000	DIN 963, ISO 2009	50	000000000	00000
								12	90°	Standard	7.50	2.20	Fully Threaded	50,000	DIN 963, ISO 2009	50	000000000	00000
								16	90°	Standard	7.50	2.20	Fully Threaded	50,000	DIN 963, ISO 2009	25	000000000	00000
								20	90°	Standard	7.50	2.20	Fully Threaded	50,000	DIN 963, ISO 2009	25	000000000	00000
								25	90°	Standard	7.50	2.20	Fully Threaded	50,000	DIN 963, ISO 2009	25	000000000	00000




										M5 × 0.8 mm

										10	90°	Standard	9.20	2.50	Fully Threaded	50,000	DIN 963, ISO 2009	25	000000000	00000


										12	90°	Standard	9.20	2.50	Fully Threaded	50,000	DIN 963, ISO 2009	25	000000000	00000
										16	90°	Standard	9.20	2.50	Fully Threaded	50,000	DIN 963, ISO 2009	25	000000000	00000
										20	90°	Standard	9.20	2.50	Fully Threaded	50,000	DIN 963, ISO 2009	25	000000000	00000
										25	90°	Standard	9.20	2.50	Fully Threaded	50,000	DIN 963, ISO 2009	25	000000000	00000




												M6 × 1 mm

												12	90°	Standard	11.00	3.00	Fully Threaded	50,000	DIN 963, ISO 2009	25	000000000	00000


16	90°											Standard	11.00	3.00	Fully Threaded	50,000	DIN 963, ISO 2009	10	000000000	0000
20	90°											Standard	11.00	3.00	Fully Threaded	50,000	DIN 963, ISO 2009	10	000000000	00000
25	90°											Standard	11.00	3.00	Fully Threaded	50,000	DIN 963, ISO 2009	10	000000000	00000
30	90°											Standard	11.00	3.00	Fully Threaded	50,000	DIN 963, ISO 2009	10	000000000	00000