Class 8 nuts are comparable in strength to Class 8.8 bolts and are suitable for fastening most machinery and equipment.

These metric nuts tighten when turned to the left; once fastened, they resist loosening from counterclockwise motion.

Closely spaced metric threads prevent these nuts from loosening due to vibration. About 25% stronger than medium-strength steel nuts, these nuts are comparable in strength to Class 10.9 bolts.

These nuts have good chemical resistance and may be mildly magnetic. Metric 18-8 stainless steel is also known as A2 stainless steel.

Tighten these nuts by turning them to the left; once fastened, they resist loosening from counterclockwise motion.

These metric nuts are corrosion resistant in wet environments, electrically conductive, and nonmagnetic.

One-third the weight of steel, these metric aluminum nuts are corrosion resistant in wet environments and nonmagnetic.

Comparable in strength to Class 12.9 bolts.

Half as thick as regular hex nuts, these nuts fit into spaces with low height clearances. They are about half as strong as medium-strength steel, and are often used for light duty applications, such as securing access panels.

These nuts should be used for light duty fastening applications, such as securing access panels.

Useful in low-clearance applications, these metric nuts are roughly half the height of standard hex nuts, but aren’t as strong. All are 18-8 stainless steel, which is nearly as strong as steel but won’t rust in outdoor, washdown, and other corrosive environments.

These nuts tighten when turned to the left; once fastened, they resist loosening from counterclockwise motion.

With threads that tighten to the left and made of 316 stainless steel, these nuts won’t loosen from counterclockwise motion in saltwater and corrosive environments. They’re half the height of standard hex nuts, so they fit where there’s low clearance.

A nylon insert keeps metric bolt threads from coming loose due to vibration, wear, and temperature swings. About 25% stronger than medium-strength steel locknuts, these nuts are made of high-strength, Class 10 steel.

Made from medium-strength steel with a nylon insert, these Class 8 metric locknuts are strong enough to use on most machinery and equipment that’s prone to vibration and temperature changes.

These metric locknuts have good chemical resistance.

These metric locknuts have an irregularly shaped thread at the top of the nut that grips the bolt for a stronger hold than nylon-insert locknuts.

Strong enough for use in most machinery and equipment, these medium-strength metric nuts have serrations on the underside of the flange. The serrations prevent the nuts from loosening in applications with mild vibration.

Metric 18-8 stainless steel is also known as A2 stainless steel. These flange locknuts have good chemical resistance and may be mildly magnetic.

Grip metric bolts more securely than nylon-insert flange locknuts—the irregularly shaped threads on these locknuts hold extra tight. They resist vibration and sudden shocks, even after multiple uses.

Also known as collar nuts, these metric nuts have a flange that distributes pressure across the surface, so you don't need a washer. Made of high-strength Class 10 steel, they’re about 25% stronger than medium-strength steel flange nuts.

Skip the washer—these metric stainless steel nuts have a flange that does the same job, spreading pressure across its surface for a strong hold.

Choose these locknuts to fasten standard metric threads. They’re Class 8 steel, so they can be used in most fastening applications.

These metric-sized coupling nuts are Class 10 steel, so they’re about 25% stronger than medium-strength steel coupling nuts.

These metric cap nuts have good chemical resistance and may be mildly magnetic.

These metric nuts are about half the strength of medium-strength steel cap nuts. Use them in light duty fastening applications, such as securing access panels.

Weld these metric nuts to flat and uneven uncoated steel surfaces for a strong permanent hold.