Material Material |
|---|
|
Width Width |
|---|
Depth Depth |
|---|
Height Height |
|---|
Mounting Adapter Type Mounting Adapter Type |
|---|
|
|
DFARS (Defense Acquisition Regulations Supplement) DFARS (Defense AcquisitionRegulations Supplement) |
|---|
Length Length |
|---|
Capacity Capacity |
|---|
|
|
Mounting Adapters for DIN Rails
Mount items not designed for DIN rail by attaching them to these adapters. Adapters clip onto the rail.
For large items that need more stability, use multiple adapters or choose an adapter with more than one mounting hole. Adapters with 12 and with 30 mounting holes have a panel for positioning multiple items together in whatever arrangement you need.
For technical drawings and 3-D models, click on a part number.
Mounting Holes | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| For DIN Rail Trade Size | Ht., mm | Wd., mm | Dp., mm | Material | Mounting Fasteners Included | Dia. | Thread Size | No. of | Capacity, lbs. | Each | |
Single Clip | |||||||||||
| DIN 3 | 37 | 14 | 13 | Steel | No | 4mm | M4 | 1 | __ | 0000000 | 00000 |
| DIN 3 | 37 | 14 | 13 | Steel | No | 5mm | M5 | 1 | __ | 0000000 | 0000 |
| DIN 1 | 24 | 16 | 13 | Steel | No | 4mm | M4 | 1 | __ | 0000000 | 0000 |
Double Clip | |||||||||||
| DIN 3 | 37 | 31 | 13 | Steel | No | 4mm | M4 | 2 | __ | 0000000 | 0000 |
| DIN 3 | 37 | 31 | 13 | Steel | No | 5mm | M5 | 2 | __ | 0000000 | 0000 |
Panel Clip | |||||||||||
| DIN 3 | 48 | 48 | 12 | Polyamide Plastic | No | 1.9mm | __ | 12 | __ | 0000000 | 0000 |
Spring Clip | |||||||||||
| DIN 3 | 51 | 42 | 8 | Aluminum | Yes | __ | __ | 1 | 125 | 00000000 | 0000 |
| DIN 3 | 51 | 75 | 8 | Aluminum | Yes | __ | __ | 2 | 125 | 00000000 | 00000 |
| DIN 3 | 51 | 100 | 8 | Aluminum | Yes | __ | __ | 2 | 125 | 00000000 | 00000 |
Stops and Spacers for DIN Rails
Position terminal blocks, relays, and other components mounted to DIN rails with these stops and spacers. They are often used to create space between components for cooling, make wiring easier, and organize electrical panels and cabinets.
Stops stay fixed in place when you attach them to a DIN rail, keeping your components from sliding along the rail. For the most secure hold, use screw-on stops. As you tighten the screw, it wedges into place against the DIN rail. Snap-on stops are quick to install or remove—just snap them onto the DIN rail.
Group markers mount onto stops—label them for easy identification.
Spacers separate and organize components into groups. They slide along DIN rails, so you can shift components without having to remove the spacers.
Stops | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
For DIN Rail | Group Markers | |||||||||||
| Trade Size | Ht., mm | Dp., mm | Ht., mm | Wd., mm | Dp., mm | Color | Pkg. Qty. | Pkg. | Pkg. Qty. | Pkg. | ||
Screw On | ||||||||||||
Plastic | ||||||||||||
| DIN 3 | 35 | 7.5, 15 | 32 | 8 | 45 | Gray | 10 | 0000000 | 00000 | 10 | 0000000 | 00000 |
| DIN 3 | 35 | 7.5, 15 | 44.5 | 9.5 | 50 | Gray | 1 | 0000000 | 0000 | 10 | 0000000 | 0000 |
| DIN 3 DIN 1 | 35 32 | 15 7.5, 15 | 34 | 9 | 44 | Gray | 10 | 0000000 | 0000 | 10 | 0000000 | 0000 |
| DIN 3 DIN 1 | 35 32 | 15 7.5, 15 | 46 | 9 | 50 | Gray | 1 | 0000000 | 0000 | 10 | 0000000 | 0000 |
| DIN 2 | 15 | 5.5 | 20 | 8 | 28 | Gray | 10 | 0000000 | 0000 | 10 | 0000000 | 0000 |
Zinc-Plated Steel | ||||||||||||
| DIN 3 | 35 | 7.5 | 27 | 16 | 39.5 | __ | 10 | 0000000 | 0000 | 10 | 0000000 | 0000 |
| DIN 3 | 35 | 15 | 27 | 16 | 39.5 | __ | 10 | 0000000 | 0000 | 10 | 0000000 | 0000 |
| DIN 1 | 32 | 15 | 25 | 11.5 | 22.5 | __ | 10 | 0000000 | 0000 | 10 | 0000000 | 0000 |
Snap On | ||||||||||||
Plastic | ||||||||||||
| DIN 3 | 35 | 7.5, 15 | 41 | 6 | 35 | Gray | 5 | 0000000 | 0000 | 10 | 0000000 | 0000 |
| DIN 3 | 35 | 15 | 41 | 10 | 35 | Gray | 10 | 0000000 | 00000 | 10 | 0000000 | 0000 |
For DIN Rail | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| Trade Size | Ht., mm | Dp., mm | Ht., mm | Wd., mm | Dp., mm | Color | Pkg. Qty. | Pkg. | |
Snap On | |||||||||
Plastic | |||||||||
| DIN 3 DIN 1 | 35 32 | 15 7.5, 15 | 29 | 8 | 43 | Black | 10 | 0000000 | 00000 |
DIN Rails
Mount terminal blocks, power supplies, relays, and other control and distribution devices on walls and other flat surfaces and in enclosures. DIN 3 is the most commonly used rail.
Rails with a bracket create extra space behind them to accommodate bulky items. Rails with an angled bracket are tilted, letting you fit more of them into a vertical space. For easy access, position high-mounted devices so they’re tilted downwards and low-mounted devices so they’re tilted upwards.
On rails without mounting holes, drill holes where you need them. Rails with a centerline guide where you should drill.
For technical drawings and 3-D models, click on a part number.
Mounting Holes, mm | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Trade Size | Ht., mm | Lg. | Dp., mm | O'all Dp., mm | Material | Mounting Fasteners Included | Dia. | Ctr.-to-Ctr. | Specifications Met | Each | |
DIN Rails | |||||||||||
| DIN 3 | 35 | 2" | 7.5 | __ | Zinc-Plated Steel | No | 6.3 | 25 | EN 50022, EN 60715 | 0000000 | 00000 |
| DIN 3 | 35 | 3 15/16" | 7.5 | __ | Zinc-Plated Steel | No | 6.3 | 25 | EN 50022, EN 60715 | 0000000 | 0000 |
| DIN 3 | 35 | 4 7/8" | 7.5 | __ | Zinc-Plated Steel | No | 6.3 | 25 | EN 50022, EN 60715 | 00000000 | 0000 |
| DIN 3 | 35 | 5 7/8" | 7.5 | __ | Zinc-Plated Steel | No | 6.3 | 25 | EN 50022, EN 60715 | 0000000 | 0000 |
| DIN 3 | 35 | 6 7/8" | 7.5 | __ | Zinc-Plated Steel | No | 6.3 | 25 | EN 50022, EN 60715 | 00000000 | 0000 |
| DIN 3 | 35 | 7 7/8" | 7.5 | __ | Zinc-Plated Steel | No | 6.3 | 25 | EN 50022, EN 60715 | 0000000 | 0000 |
| DIN 3 | 35 | 8 7/8" | 7.5 | __ | Zinc-Plated Steel | No | 6.3 | 25 | EN 50022, EN 60715 | 00000000 | 0000 |
| DIN 3 | 35 | 9 13/16" | 7.5 | __ | Zinc-Plated Steel | No | 6.3 | 25 | EN 50022, EN 60715 | 0000000 | 0000 |
| DIN 3 | 35 | 10 13/16" | 7.5 | __ | Zinc-Plated Steel | No | 6.3 | 25 | EN 50022, EN 60715 | 00000000 | 0000 |
| DIN 3 | 35 | 11 13/16" | 7.5 | __ | Zinc-Plated Steel | No | 6.3 | 25 | EN 50022, EN 60715 | 0000000 | 0000 |
| DIN 3 | 35 | 12 3/4" | 7.5 | __ | Zinc-Plated Steel | No | 6.3 | 25 | EN 50022, EN 60715 | 00000000 | 0000 |
| DIN 3 | 35 | 13 3/4" | 7.5 | __ | Zinc-Plated Steel | No | 6.3 | 25 | EN 50022, EN 60715 | 0000000 | 0000 |
| DIN 3 | 35 | 15 3/4" | 7.5 | __ | Zinc-Plated Steel | No | 6.3 | 25 | EN 50022, EN 60715 | 0000000 | 0000 |
| DIN 3 | 35 | 17 11/16" | 7.5 | __ | Zinc-Plated Steel | No | 6.3 | 25 | EN 50022, EN 60715 | 0000000 | 0000 |
| DIN 3 | 35 | 19 11/16" | 7.5 | __ | Zinc-Plated Steel | No | 6.3 | 25 | EN 50022, EN 60715 | 0000000 | 0000 |
| DIN 3 | 35 | 21 11/16" | 7.5 | __ | Zinc-Plated Steel | No | 6.3 | 25 | EN 50022, EN 60715 | 0000000 | 0000 |
| DIN 3 | 35 | 23 5/8" | 7.5 | __ | Zinc-Plated Steel | No | 6.3 | 25 | EN 50022, EN 60715 | 0000000 | 0000 |
| DIN 3 | 35 | 1m | 7.5 | __ | Zinc-Plated Steel | No | 6.3 | 25 | EN 50022, EN 60715 | 0000000 | 0000 |
| DIN 3 | 35 | 1m | 7.5 | __ | 304 Stainless Steel | __ | __ | __ | EN 50022, EN 60715 | 0000000 | 00000 |
| DIN 3 | 35 | 1m | 10 | __ | Aluminum | No | 4.7 | 35.5 | EN 50022, EN 60715 | 0000000 | 0000 |
| DIN 3 | 35 | 1m | 15 | __ | Zinc-Plated Steel | No | 6.3 | 25 | EN 50022, EN 60715 | 0000000 | 0000 |
| DIN 3 | 35 | 2m | 7.5 | __ | Zinc-Plated Steel | No | 6.3 | 25 | EN 50022, EN 60715 | 0000000 | 0000 |
| DIN 3 | 35 | 2m | 7.5 | __ | 304 Stainless Steel | __ | __ | __ | EN 50022, EN 60715 | 0000000 | 00000 |
| DIN 3 | 35 | 2m | 15 | __ | Zinc-Plated Steel | No | 6.3 | 25 | EN 50022, EN 60715 | 0000000 | 00000 |
| DIN 2 | 15 | 1m | 5.5 | __ | Zinc-Plated Steel | No | 4.2 | 20 | EN 50022, EN 60715 | 0000000 | 0000 |
| DIN 2 | 15 | 2m | 5.5 | __ | Zinc-Plated Steel | No | 4.2 | 20 | EN 50022, EN 60715 | 0000000 | 0000 |
| DIN 1 | 32 | 1m | 15 | __ | Zinc-Plated Steel | No | 6.3 | 25 | EN 50022, EN 60715 | 0000000 | 0000 |
| DIN 1 | 32 | 2m | 15 | __ | Zinc-Plated Steel | No | 6.3 | 25 | EN 50022, EN 60715 | 0000000 | 00000 |
DIN Rails with Bracket | |||||||||||
| DIN 3 | 35 | 1m | 7.5 | 58 | Aluminum | No | 5.5 | 75 | EN 50022, EN 60715 | 0000000 | 00000 |
| DIN 3 | 35 | 2m | 7.5 | 58 | Aluminum | No | 5.5 | 75 | EN 50022, EN 60715 | 0000000 | 00000 |
| DIN 3 | 35 | 2m | 7.5 | 120 | Aluminum | No | 5.5 | 75 | EN 50022, EN 60715 | 0000000 | 00000 |
DIN Rails with Angled Bracket | |||||||||||
| DIN 3 | 35 | 1m | 7.5 | 66 | Aluminum | No | 5.6 | 76 | __ | 0000000 | 00000 |
| DIN 3 | 35 | 2m | 7.5 | 66 | Aluminum | No | 5.6 | 76 | __ | 0000000 | 00000 |
DIN Rails with Centerline | |||||||||||
| DIN 3 | 35 | 1m | 7.5 | __ | Zinc-Plated Steel | __ | __ | __ | EN 50022, EN 60715 | 0000000 | 0000 |
| DIN 3 | 35 | 1m | 15 | __ | Zinc-Plated Steel | __ | __ | __ | EN 50022, EN 60715 | 0000000 | 0000 |
| DIN 3 | 35 | 2m | 7.5 | __ | Zinc-Plated Steel | __ | __ | __ | EN 50022, EN 60715 | 0000000 | 0000 |
| DIN 3 | 35 | 2m | 15 | __ | Zinc-Plated Steel | __ | __ | __ | EN 50022, EN 60715 | 0000000 | 00000 |
DIN-Rail Mounts for Development Boards
Protect development boards from dust, water, and debris by mounting them to DIN rails inside control cabinets. These mounts have an open-air design to keep boards cool and prevent them from overheating. They attach perpendicularly to DIN rails, taking up less space in your setup. Use the included cable ties to secure your cords to the mount and keep connections free from strain.
For DIN Rail | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| For Manufacturer Series | Ht. | Wd. | Dp. | Ht., mm | Trade Size | Mounting Fasteners Included | Includes | Each | |
Nylon 6/6 Plastic | |||||||||
| Arduino Uno, Mega | 4 7/8" | 3 1/2" | 7/16" | 35 | DIN 3 | Yes | Cable Ties | 0000000 | 000000 |
| Beaglebone Black, Green | 5 5/8" | 3 1/2" | 7/16" | 35 | DIN 3 | Yes | Cable Ties | 0000000 | 00000 |
| Raspberry Pi 2, 3, 4; Asus Tinker Board; O-Droid C2 | 3 5/8" | 3 5/8" | 7/16" | 35 | DIN 3 | Yes | Cable Ties | 0000000 | 00000 |
| Raspberry Pi Zero | 3 1/8" | 2 7/8" | 1/4" | 35 | DIN 3 | Yes | Cable Ties | 0000000 | 00000 |
Mounting Brackets for DIN Rails
Use these brackets for extra mounting space behind DIN rail to accommodate wiring and bulky items. Brackets with multiple DIN rail mounting holes hold several DIN rails on one set of brackets, so you don’t need to drill as many holes in your enclosure.
For technical drawings and 3-D models, click on a part number.
Mounting Holes | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| For DIN Rail Trade Size | Ht., mm | Wd., mm | Dp., mm | Top Dp., mm | Material | Mounting Fasteners Included | Dia. | No. of | DIN Rail Mounting Fasteners Included | DIN Rail Mounting Hole Size (No. of) | Pkg. Qty. | Each | |
Angled | |||||||||||||
| DIN 3, DIN 2, DIN 1 | 80 | 25 | 50 | 25 | Zinc-Plated Steel | No | 7 mm | 2 | Yes | M6 × 1 mm (1) | __ | 0000000 | 00000 |
| DIN 3, DIN 2, DIN 1 | 97 | 18 | 48 | 32 | Zinc-Plated Steel | No | 4.3 mm | 2 | No | 4.3 mm (1) | __ | 0000000 | 00000 |
Straight | |||||||||||||
| DIN 3, DIN 2, DIN 1 | 80 | 20 | 25 | __ | Zinc-Plated Steel | No | 7 mm | 2 | Yes | M6 × 1 mm (1) | __ | 0000000 | 0000 |
| DIN 3, DIN 2, DIN 1 | 80 | 20 | 50 | __ | Zinc-Plated Steel | No | 7 mm | 2 | Yes | M6 × 1 mm (1) | __ | 0000000 | 0000 |
| DIN 3, DIN 2, DIN 1 | 80 | 20 | 70 | __ | Zinc-Plated Steel | No | 7 mm | 2 | Yes | M6 × 1 mm (1) | __ | 0000000 | 0000 |
| DIN 3, DIN 2, DIN 1 | 80 | 20 | 90 | __ | Zinc-Plated Steel | No | 7 mm | 2 | Yes | M6 × 1 mm (1) | __ | 0000000 | 0000 |
| Pkg. | |||||||||||||
| DIN 3, DIN 2, DIN 1 | 121 | 18 | 9 | __ | Zinc-Plated Steel | Yes | 5 mm | 2 | No | 4 mm (2), M5 × 0.8 mm (3) | 2 | 0000000 | 00000 |
| DIN 3, DIN 2, DIN 1 | 171 | 18 | 9 | __ | Zinc-Plated Steel | Yes | 5 mm | 2 | No | 4 mm (4), M5 × 0.8 mm (5) | 2 | 0000000 | 00000 |
| DIN 3, DIN 2, DIN 1 | 201 | 18 | 9 | __ | Zinc-Plated Steel | Yes | 5 mm | 2 | No | 4 mm (5), M5 × 0.8 mm (6) | 2 | 0000000 | 00000 |
| DIN 3, DIN 2, DIN 1 | 221 | 18 | 9 | __ | Zinc-Plated Steel | Yes | 5 mm | 2 | No | 4 mm (6), M5 × 0.8 mm (7) | 2 | 0000000 | 00000 |
| DIN 3, DIN 2, DIN 1 | 271 | 18 | 9 | __ | Zinc-Plated Steel | Yes | 5 mm | 2 | No | 4 mm (8), M5 × 0.8 mm (9) | 2 | 0000000 | 00000 |
| DIN 3, DIN 2, DIN 1 | 321 | 18 | 9 | __ | Zinc-Plated Steel | Yes | 5 mm | 2 | No | 4 mm (10), M5 × 0.8 mm (11) | 2 | 0000000 | 00000 |
Cable Clips for DIN Rails
 Style B Installed (DIN Rail and Cable Not Included) |  A |  C |  B |
 A |  C |  B |
Slide these clips on DIN rails—often used in equipment cabinet racks—to route and organize cables. Since these clips don’t require adhesive or screws, you can move them anywhere along the rail.
Style A and C clips have a C-shape design, allowing you to move, add, and remove cables more easily than those with an interlocking design. Use them for applications that require frequent cable adjustments.
Style B clips have an interlocking design to hold cables more securely than those with a C-shape design. They’re best for applications that don’t require frequent cable adjustments.
For added versatility, clips with a top or bottom cable entry location can be used to route cables on either side of your DIN rail.
For technical drawings and 3-D models, click on a part number.
Inside | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Style | For DIN Rail Trade Size | Height, mm | Width, mm | Depth, mm | Height, mm | Width, mm | Cable Entry Location | Material | Color | Mount Type | Specifications Met | Pkg. Qty. | Pkg. | |
C-Shape | ||||||||||||||
| A | DIN 3 | 15 | 15 | 10 | 5 | 11 | Side | Nylon Plastic | Off-White | Slide On | UL 94 V-2 | 25 | 00000000 | 000000 |
| A | DIN 1 | 15 | 15 | 10 | 5 | 11 | Side | Nylon Plastic | Off-White | Slide On | UL 94 V-2 | 25 | 00000000 | 00000 |
| C | DIN 3 | 11 | 11 | 10 | 5 | 6 | Bottom, Top | Nylon Plastic | Off-White | Slide On | UL 94 V-2 | 25 | 00000000 | 00000 |
| C | DIN 1 | 11 | 11 | 10 | 5 | 6 | Bottom, Top | Nylon Plastic | Off-White | Slide On | UL 94 V-2 | 25 | 00000000 | 00000 |
Interlocking | ||||||||||||||
| B | DIN 3 | 15 | 16 | 10 | 5 | 11 | Side | Nylon Plastic | Off-White | Slide On | UL 94 V-2 | 25 | 00000000 | 00000 |
| B | DIN 1 | 15 | 16 | 10 | 5 | 11 | Side | Nylon Plastic | Off-White | Slide On | UL 94 V-2 | 25 | 00000000 | 00000 |
Adhesive-Back DIN Rails
Stick this DIN rail in any enclosure to mount components without making screw holes that might leak. The adhesive backing and short length let you install these in tight spaces where a screwdriver wouldn’t fit. Adhesive reaches full capacity after 24 hours.
DIN rails meet UL 94 V-0, so if they catch fire, they’ll self-extinguish within 10 seconds and won’t spread the fire by dripping.
For technical drawings and 3-D models, click on a part number.
Magnetic-Back DIN Rails
Mount and reposition components without drilling leaky holes in your steel enclosure—a strong magnet holds these DIN rails in place. Since they install without screws, they fit in spaces that are too small for a screwdriver.
DIN rails meet UL 94 V-0, which means they self-extinguish within 10 seconds and won’t spread fire by dripping.
For technical drawings and 3-D models, click on a part number.
| Capacity, lbs. | Trade Size | Height, mm | Length, mm | Overall Length, mm | Depth, mm | Material | Color | Specifications Met | Each | |
| 6 1/2 | DIN 3 | 35 | 66 | 71 | 15 | Plastic | Black | UL 94 V-0 | 0000000 | 000000 |
Mounting Channels for Enclosures
Customize component placement without drilling leaky holes—these channels screw into the mounting bosses in your enclosure. Use strut channel nuts (sold separately) to add a DIN rail at any point along the channel, then clip on terminal blocks and other parts. To adjust spacing, loosen the strut channel nuts and slide the rail along the channel.
For technical drawings and 3-D models, click on a part number.
Channel | Slot | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Length | Material | Height | Width | Inside Channel Width | Width | Center-to-Center | End-to-Channel End | Pkg. Qty. | Pkg. | |
| 9 5/8" | Zinc-Plated Steel | 13/32" | 13/16" | 7/16" | 3/8" | 8 13/16" | 19/32" | 2 | 0000000 | 0000000 |
| 13 5/8" | Zinc-Plated Steel | 13/32" | 13/16" | 7/16" | 3/8" | 12 13/16" | 19/32" | 2 | 0000000 | 000000 |
| 17 5/8" | Zinc-Plated Steel | 13/32" | 13/16" | 7/16" | 3/8" | 16 13/16" | 19/32" | 2 | 0000000 | 000000 |
| 21 5/8" | Zinc-Plated Steel | 13/32" | 13/16" | 7/16" | 3/8" | 20 13/16" | 19/32" | 2 | 0000000 | 000000 |
| 57 5/8" | Zinc-Plated Steel | 13/32" | 13/16" | 7/16" | 3/8" | 56 13/16" | 19/32" | 2 | 0000000 | 000000 |
DIN-Rail-Mount Hook and Loop Cable Ties
Route and organize wire, cable, and hose along your DIN rail. Unlike zip ties, these cable ties can be temporarily undone to add or remove material. Clip their base to DIN 3 rail, which is the most commonly used size. All meet UL 94 V-0, which means they quickly self-extinguish, making them good for hot and poorly ventilated environments such as server rooms.
For DIN Rail | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Lg. | For Max. Bundle Dia. | For Max. Number of Bundles | Wd. | Thick. | Ht., mm | Trade Size | For Use Outdoors | Specifications Met | Temp. Range, °F | Color | Each | |
Polyamide Plastic with Feed-Through Plastic Buckle | ||||||||||||
Two Way | ||||||||||||
| 6" | 3/4" | 1 | 3/8" | 0.053" | 35 | DIN 3 | Yes | UL 94 V-0 | 0° to 175° | Black | 0000000 | 00000 |
| 7" | 1 3/8" | 1 | 3/4" | 0.053" | 35 | DIN 3 | Yes | UL 94 V-0 | 0° to 175° | Black | 0000000 | 00000 |
| 8" | 2 3/8" | 1 | 3/4" | 0.053" | 35 | DIN 3 | Yes | UL 94 V-0 | 0° to 175° | Black | 0000000 | 00000 |