Prep, paint, and seal small scratches on metal surfaces with these pens.

Black pens have a beveled abrasive tip to remove rust and clean the surface. They have a roller-ball tip for precision paint application and a brush tip for general use. Once the paint dries, use the foam tip to apply the clear coat included in the pen’s base.

Hide nicks and scratches on metal surfaces with this textured-finish paint. It stops rust from starting and prevents existing rust from spreading. Paint cannot be sold to the regions listed due to local regulatory limits on VOCs (volatile organic compounds).

Paint in an aerosol can dries quickly to prevent dust and debris from adhering.

Apply paint in a one-quart can with a brush, roller, or sprayer.

Touch up scratches and wear on powder-coated metal without a primer. Choose the color that matches your equipment—this paint matches some of the most common colors used in powder-coating applications.

This acrylic-lacquer paint produces a thick, durable finish that won’t run or drip as it dries. For best results, use a primer with new or rusted metal and with new wood.

Thicker than polyurethane and paint, these coatings have high moisture resistance and protect against abrasion and chemicals. Coatings may chalk with exposure to sunlight. They cannot be sold to the regions listed because they exceed local regulatory limits on VOC (volatile organic compounds).

Apply coatings in a two-gallon can with a brush, roller, or sprayer. The size listed is the combined total of the two parts.

Safety-color coatings come in colors approved by OSHA to color-code safety equipment locations, physical hazards, and protective equipment. Safety yellow indicates caution and is often used on tripping hazards, exposed edges, and start buttons.

These zinc-rich coatings offer the protection of hot-dip galvanizing to keep iron and steel free of rust and corrosion. They're designed for outdoor use, but can also be used indoors in well-ventilated areas.

Coatings with 99% zinc withstand temperatures up to 750° F.

Apply coatings in a can with a brush, roller, or sprayer.

Coatings that cannot be sold to Canada are restricted by product labeling requirements.

Tough and long-lasting, these flexible coatings protect against rust and corrosion.

Protect brass, bronze, copper, and silver from moisture, chemicals, oxidation, and abrasion.

Seal out moisture on scratched painted metal.

More durable and scratch resistant than liquid paint, use this dry paint with your powder coating system. Apply directly to unpainted metal and heat-cure in an oven for a smooth, baked-on finish.

Made with flakes of 316 stainless steel, these flexible silicone coatings have excellent durability and corrosion resistance. They withstand temperatures up to 1200° F for use on boilers, stacks, piping, and similar indoor applications. Apply with a brush, roller, or sprayer.

Some of the thickest and most durable on the market, these coatings have excellent abrasion and impact resistance. Often used as a topcoat over epoxy coatings, they provide superior UV resistance and have great color and gloss retention. Apply with a brush, roller, or sprayer. The size listed is the combined total of the two parts.

Apply these wear-resistant coatings to wood to protect from scuffs, water, and oil damage.

Protect steel and iron parts from corrosion without having to remove the primer before welding them together. Often used on structural steel in demanding environments, these primers can be welded through without affecting the weld’s integrity. Apply with a brush or sprayer.

Add long-term corrosion protection to uncoated or rusty metal surfaces. These primers prepare your surface to extend the life of paint and coatings. Apply with a brush, roller, or sprayer.

Acrylic primers are available in two colors. Choose gray primer for light-colored topcoats; red for dark topcoats.

Polyurethane primers can be applied in environments with high humidity or extreme temperatures. Surface must be visibly dry and free of frost and ice.

Get the power of a two-part epoxy primer in an easy-to-use aerosol can. These primers have excellent chemical and corrosion resistance. Spray them on uncoated or rusty metal to extend the life of paint and coatings. The two parts are contained in the same can; after activating, epoxy is usable for up to four days.

These primers stand up to marine exposure and salt spray. Use them to prepare your surface to extend the life of paint and coatings.

Extend the life of your paint and coatings on damage-prone metal surfaces. When scratched or worn, these primers release small capsules of uncured primer to provide continued corrosion resistance. Apply with a brush, roller, or sprayer. The size listed is the combined total of the two parts.

These primers fill surface cracks and are sandable for a smooth basecoat. Use them to prepare your surface to extend the life of paint and coatings. Choose gray for light-color topcoats; red for medium-color topcoats; and black for dark topcoats.