Their spring-loaded design withstands vibration, rattling, and shaking better than other push-to-close grab latches for a more secure hold.

Turn the screw on the latch to adjust the gripping force on the strike plate.

Also known as bullet catches, these latches have a spring-loaded ball that grabs and holds the strike plate to keep doors shut.

Close and open these grab latches with a push—there's no need for a handle.

To keep your environments free of contaminants, the magnet is encapsulated so it won't release particles when it meets the strike plate.

Made to NSF/ANSI standards, these latches have a completely sealed magnet to eliminate crevices that can trap food particles.

Doors stay closed with the pressure of rollers against the strike plate.

To prevent doors from slamming, these latches are hydraulic.

Keep doors on refrigerators and industrial enclosures closed.

Also known as paddle latches, these are often used on electrical panels, cabinets, and lockers.

Mount these padlockable latches horizontally to the face of doors on refrigerators, ovens, and industrial enclosures with the strike plate mounted on the frame.

Operate these padlockable latches from either side of the door—there is a handle on both sides.

Attach these locks vertically to the side edge of doors on refrigerators and industrial enclosures with the strike plate mounted behind them on the frame.

Mount these locks horizontally to the face of doors on refrigerators and industrial enclosures with the strike plate mounted on the frame.

To prevent accidental opening, these latches have a safety catch.

These latches use downward compression to pull surfaces together for sealing gasketed doors.

Designed with compression springs to withstand vibration better than standard draw latches, these offer a more secure hold.

To prevent accidental opening, these latches have a safety catch.

An integrated slide bolt extends into the strike plate to resist pull and vibration from side-to-side, front-to-back, and up-and-down forces.

No need for a strike plate, these latches hook into a lip or notch.

Adjust the latching distance for a tight fit over gasketing and to compensate for misalignment.

These latches hook into a lip or notch and have an adjustable latching distance to compensate for gasketing and misalignment.

To prevent accidental opening, these latches have a safety catch.

Use these L-handle latches to draw lightweight surfaces together.

With a spring-loaded handle, these hold tighter than other turn-to-open draw latches and compensate for slight misalignment.

For use on gasketed doors, these latches use downward compression to pull surfaces together. They have a safety catch to prevent accidental opening.

Secure surfaces together with these padlockable latches; built-in springs withstand vibration better than other latches.

Adjust the latching distance to compensate for gasketing and misalignment.

Each latch comes with a variety of strike plates for different mounting options.

Lift and turn the handle 180° to open and close this lock.

For use on gasketed doors, these latches use downward compression to pull surfaces together.

These latches have a spring-wire cam that slips under a receiving catch on a cabinet body to create tension and hold cabinet doors and drawers closed.

The mounting screws on these latches are concealed to prevent tampering.

These latches are IP65 rated for protection against dust, dirt, and low-pressure washdowns.

Also known as compression cam latches, these reach full compression when you lift the handle, turn it a quarter-turn, and then push it down for a secure hold.

The mounting screws on these latches are concealed to prevent tampering.

These latches are IP65 rated for protection against dust, dirt, and low-pressure washdowns.

Also known as compression cam latches, these reach full compression when you lift the handle, turn it a quarter-turn, and then push it down for a secure hold.

Fold the ring handle into the recess to stay out of the way when not in use.

Raise the handle and it swings smoothly for easy latching and unlatching.

Designed for use in 1/2" dia. through holes.

These latches have a spring-wire cam that slips under a receiving catch on a cabinet body to create tension and hold cabinet doors and drawers closed.

Also known as adjustable compression cam latches, these adjust to compensate for door or drawer misalignment.

Use these locks in a 3/4" dia. through hole, which is the most common through-hole size.

Meet U.S. postal service guidelines for mailbox locks.

Designed for use in 1/2" dia. through holes.

These locks are IP65 and NEMA 4 rated for protection against dust, dirt, and washdowns.

Designed for use in 1/2" dia. through holes.

Use these locks in a 3/4" dia. through hole, which is the most common through-hole size.

Made of plastic, these locks are suitable for damp and humid environments.

To prevent internal damage, these locks have a stainless steel shutter that blocks rain, snow, and dirt from entering the cylinder.

Offering more security than standard master keyed cam locks, these have circular keys that are difficult to duplicate.

These sets come with four cam locks that are divided into two groups of two. Each group of cam locks opens with a specific key number. All open with the same master key.

Designed for use in 1/4" or 1/2" dia. through holes.

Also known as adjustable compression cam locks, these adjust to compensate for door or drawer misalignment.

These locks have a spring-wire cam that slips under a receiving catch on a cabinet body to create tension and hold cabinet doors and drawers closed.

These locks require a hex key to open.

Designed for food-processing and hygienic applications, these corrosion-resistant cam locks are made of FDA listed materials.

A red indicator on the lock face is visible when unlocked and hidden when locked.

Also known as compression cam locks, turn the head a quarter-turn to latch, then another quarter-turn to draw the cam firmly against the door or drawer surface.

Choose these locks if you need to open several with the same key.

In addition to an IP65 rating for low-pressure washdown environments, these locks have a squeeze-release handle to prevent accidental opening when unlocked.

Open these locks with both a master key and their own unique key.

Choose these locks if you need each one to open with a different key.