McMaster-Carr logo
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Comments
    E-mail address (if you would like a response)
    295 Products

    Double Open-End Wrenches

    Image of Product. Front orientation. Open-End Wrenches. Double Open-End Wrenches.
    Image of Attribute. Front orientation. Contains Annotated. Double Open-End Wrenches.
    Image of Specification. Front orientation. ZoomedIn view. Contains Border. Round Opening. Double Open-End Wrenches.
    Image of Specification. Front orientation. ZoomedIn view. Contains Border. Square Opening. Double Open-End Wrenches.

    Round

    Opening

    Square

    Opening

    Switch between two different-sized fasteners without swapping out your wrenches. The two heads save you time, while reducing the number of tools you need to keep on hand. Drop forged for added strength, these wrenches will be part of your toolbox for life.
    Round Opening—The rounded edges spread force evenly to prevent stripping your fasteners. Use them on hex-head fasteners.
    Square Opening—Grip square-head fasteners to securely tighten or loosen them.
    Black-Oxide Steel—The dark, matte coating protects these wrenches from wear and won't flake off. They offer minimal corrosion resistance, though, so they're best for dry environments.
    Chrome-Plated Steel—The most popular finish, these wrenches won't rust or chip. Although they withstand moisture better than black oxide, they don't hold up to harsh chemicals as well as stainless steel.
    Corrosion-Resistant Wear-Resistant 420 Stainless Steel—Containing more carbon than 17-4 PH stainless steel, these wrenches stand up to abrasion and impacts for years of use without breaking or warping. They won’t rust in wet and outdoor environments, plus they resist mild acids.
    Corrosion-Resistant High-Strength 17-4 PH Stainless Steel—The strongest stainless steel open-end wrenches we offer withstand force without deforming. They won’t rust in wet and outdoor environments, plus they resist mild acids.
    Dull—With a textured finish, these wrenches won't slip out of your hands, even when greasy or oily.
    Polished—The smooth surface is easy to wipe clean of grime. The mirror-like finish lends a high-end look to any toolkit.
    Drive Size
    Overall
    Lg.
    Opening
    Angle
    Head Thickness
    Appearance
    Specs. Met
    Each
    Round Opening
     
    Black-Oxide Steel
    1/4" × 5/16"4"15°3/16"ASME B107.1005401A17000000
    5/16" × 11/32"4"15°3/16"ASME B107.1005401A1800000
    5/16" × 3/8"5 1/4"15°7/32" × 13/64"5401A1100000
    5/16" × 13/32"4"15°3/16"ASME B107.1005401A1900000
    3/8" × 1/2"4 7/8"15°13/64"ASME B107.1005401A1300000
    7/16" × 1/2"5 1/2"15°1/4"ASME B107.1005401A1400000
    7/16" × 9/16"5 3/4"15°1/4"ASME B107.1005401A1500000
    1/2" × 9/16"7 1/8"15°9/32" × 17/64"5401A1600000
    1/2" × 5/8"6 1/8"15°1/4"ASME B107.1005401A6800000
    9/16" × 5/8"7 3/4"15°9/32"5401A2100000
    9/16" × 11/16"7 1/2"15°19/64"ASME B107.1005401A2400000
    9/16" × 3/4"7 1/2"15°19/64"ASME B107.1005401A2700000
    5/8" × 11/16"7 1/2"15°19/64"ASME B107.1005401A2300000
    11/16" × 3/4"9"15°11/32" × 21/64"5401A2600000
    11/16" × 25/32"8 1/2"15°5/16"ASME B107.1005401A2800000
    3/4" × 13/16"9 5/8"15°11/32"ASME B107.1005401A3400000
    3/4" × 7/8"9 5/8"15°11/32"5401A3500000
    13/16" × 7/8"10 1/4"15°3/8" × 23/64"5401A3600000
    7/8" × 15/16"10 5/8"15°3/8"ASME B107.1005401A4300000
    7/8" × 1"10 5/8"15°3/8"ASME B107.1005401A3700000
    15/16" × 1"11 1/2"15°13/32"5401A4500000
    15/16" × 1 1/16"11 1/2"15°7/16"ASME B107.1005401A4700000
    1" × 1 1/8"12 1/2"15°7/16"ASME B107.1005401A5100000
    1 1/16" × 1 1/8"12 1/2"15°15/32" × 29/64"5401A7600000
    1 1/8" × 1 1/4"13 3/4"15°1/2"ASME B107.1005401A5300000
    1 1/4" × 1 7/16"15"15°9/16"ASME B107.1005401A5600000
    1 5/16" × 1 1/2"15 1/2"15°9/16"ASME B107.1005401A5700000
    1 3/8" × 1 7/16"16"15°9/16" × 35/64"5401A5800000
    1 1/2" × 1 5/8"17 1/4"15°5/8" × 39/64"5401A6400000
     
    Chrome-Plated Steel
    3/16" × 1/4"3 7/8"15°1/8" × 11/64"PolishedASME B107.1005420A400000
    1/4" × 5/16"4 1/2"15°3/16" × 5/32"Dull5408A1100000
    5/16" × 11/32"4"15°3/16"DullASME B107.1005408A1200000
    5/16" × 3/8"5 1/8"15°7/32" × 13/64"Dull5408A1300000
    5/16" × 13/32"4"15°3/16"DullASME B107.1005408A6100000
    3/8" × 7/16"5 3/4"15°7/32"Dull5408A1400000
    3/8" × 1/2"4 7/8"15°13/64"DullASME B107.1005408A1500000
    7/16" × 1/2"6 3/8"15°1/4"Dull5408A1600000
    7/16" × 9/16"5 3/4"15°1/4"DullASME B107.1005408A1700000
    1/2" × 9/16"7"15°9/32" × 17/64"Dull5408A1800000
    1/2" × 5/8"6 1/8"15°1/4"DullASME B107.1005408A3300000
    9/16" × 5/8"7 5/8"15°9/32"Dull5408A2100000
    9/16" × 11/16"7 1/2"15°19/64"DullASME B107.1005408A2200000
    9/16" × 3/4"7 1/2"15°19/64"DullASME B107.1005408A3800000
    5/8" × 11/16"8 1/4"15°5/16"Dull5408A2400000
    5/8" × 3/4"8 5/8"15°5/16"Dull5408A2500000
    11/16" × 3/4"8 7/8"15°11/32" × 21/64"Dull5408A2600000
    3/4" × 13/16"9 5/8"15°11/32"DullASME B107.1005408A2900000
    3/4" × 7/8"9 5/8"15°11/32"Dull5408A3100000
    13/16" × 7/8"10 1/8"15°3/8" × 23/64"Dull5408A3400000
    7/8" × 15/16"10 5/8"15°3/8"DullASME B107.1005408A3500000
    7/8" × 1"10 5/8"15°3/8"DullASME B107.1005408A3600000
    15/16" × 1"11 3/8"15°13/32"Dull5408A3700000
    15/16" × 1 1/16"11 1/2"15°7/16"DullASME B107.1005408A3900000
    1" × 1 1/8"12 1/2"15°7/16"DullASME B107.1005408A4100000
    1 1/16" × 1 1/8"12 3/4"15°15/32" × 29/64"Dull5408A6800000
    1 1/16" × 1 1/4"12 15/16"15°7/16" × 1/2"Dull5408A4200000
    1 1/8" × 1 1/4"13 3/4"15°1/2"DullASME B107.1005408A4300000
    1 1/4" × 1 7/16"15"15°9/16"DullASME B107.1005408A46000000
    1 5/16" × 1 1/2"15 1/2"15°9/16"DullASME B107.1005408A47000000
    1 3/8" × 1 7/16"15 3/4"15°9/16" × 35/64"Dull5408A4800000
    1 1/2" × 1 5/8"17"15°5/8" × 39/64"Dull5408A52000000
    1 11/16" × 1 13/16"18 1/2"15°23/32" × 45/64"Dull5408A53000000
    1 7/8" × 2"20"15°23/32" × 45/64"Dull5408A54000000
    4 mm × 5 mm4"15°1/8"Dull5420A3200000
    5.5 mm × 7 mm4 3/4"15°9/64"Dull5420A1300000
    6 mm × 7 mm4 1/2"15°5/32"PolishedASME B107.1005420A2500000
    7 mm × 8 mm4 1/8"15°5/32" × 3/16"DullASME B107.95420A2400000
    8 mm × 9 mm5 1/8"15°3/16"DullASME B107.1005420A3100000
    8 mm × 10 mm5 1/2"15°11/64"Dull5420A1200000
    10 mm × 11 mm5 3/8"15°7/32"DullASME B107.95420A3300000
    10 mm × 13 mm6 3/4"15°13/64"Dull5420A3400000
    12 mm × 13 mm6 3/16"15°1/4"DullASME B107.95420A1500000
    12 mm × 14 mm6 11/16"15°7/32"Dull5420A1400000
    13 mm × 15 mm7 7/16"15°7/32"Dull5420A2600000
    13 mm × 17 mm8 1/16"15°15/64"Dull5420A3500000
    14 mm × 15 mm7 11/32"15°9/32" × 19/64"PolishedASME B107.1005420A1800000
    16 mm × 17 mm8 1/4"15°5/16" × 11/32"PolishedASME B107.1005420A2200000
    17 mm × 19 mm8 1/2"15°5/16" × 11/32"DullASME B107.95420A1700000
    18 mm × 19 mm9 1/8"15°11/32"PolishedASME B107.1005420A2700000
    19 mm × 24 mm9 7/8"15°9/32"DullDIN 31105420A3600000
    20 mm × 22 mm10 3/4"15°3/8"PolishedASME B107.1005420A1900000
    21 mm × 23 mm10 1/8"15°3/8" × 23/64"DullASME B107.1005420A2100000
    22 mm × 24 mm9 7/8"15°5/16"Dull5420A3700000
    24 mm × 26 mm11 3/8"15°13/32"DullASME B107.1005420A2300000
    24 mm × 27 mm11"15°21/64"Dull5420A3800000
    25 mm × 28 mm11 1/4"15°21/64"Dull5420A2800000
    27 mm × 30 mm11 7/8"15°3/8"Dull5420A2900000
    30 mm × 32 mm11 7/8"15°3/8"Dull5420A4100000
    32 mm × 36 mm13"15°25/64"Dull5420A5400000
    34 mm × 36 mm13"15°25/64"Dull5420A5300000
    41 mm × 46 mm16 3/4"15°15/32"Dull5420A43000000
    46 mm × 50 mm17 3/4"15°27/64"DullDIN 31105420A44000000
     
    Corrosion-Resistant Wear-Resistant 420 Stainless Steel
    5/8" × 11/16"8 1/4"15°17/64" × 9/32"54565A14000000
    1 1/8" × 1 1/4"11 1/8"15°21/64"54565A18000000
    14 mm × 15 mm7 5/8"15°1/4" × 17/64"55195A25000000
     
    Corrosion-Resistant High-Strength 17-4 PH Stainless Steel
    1/4" × 5/16"4 3/4"15°13/64"54565A1100000
    3/8" × 7/16"6 1/4"15°7/32"54565A12000000
    1/2" × 9/16"7"15°15/64"54565A13000000
    3/4" × 13/16"8 7/8"15°5/16"54565A15000000
    7/8" × 15/16"10 1/4"15°21/64"54565A16000000
    1" × 1 1/16"10 3/8"15°5/16"54565A17000000
    6 mm × 7 mm5"15°13/64"55195A21000000
    8 mm × 9 mm5 3/4"15°13/64"55195A2200000
    10 mm × 11 mm6 1/4"15°7/32"55195A23000000
    12 mm × 13 mm7"15°15/64" × 1/4"55195A24000000
    16 mm × 17 mm8 1/4"15°19/64"55195A26000000
    19 mm × 22 mm9 3/8"15°5/16" × 21/64"55195A27000000
     
    Square Opening
     
    Black-Oxide Steel
    3/16" × 1/4"4 1/4"22°9/32"ASME B107.1005402A3100000
    1/4" × 5/16"4 1/4"22°9/32"ASME B107.1005402A3300000
    5/16" × 3/8"5"22°11/32"ASME B107.1005402A3500000
    3/8" × 7/16"5 3/4"22°3/8"ASME B107.1005402A3700000
    3/8" × 1/2"5 3/4"22°13/32"ASME B107.1005402A3800000
    7/16" × 1/2"5 3/4"22°13/32"ASME B107.1005402A3900000
    1/2" × 5/8"8 1/2"22°9/16"ASME B107.1005402A4200000
     

    Tight-Clearance Angled Open-End Wrenches

    Image of Product. Front orientation. Open-End Wrenches. Tight-Clearance Angled Open-End Wrenches.
    Image of Attribute. Front orientation. Contains Annotated. Tight-Clearance Angled Open-End Wrenches.
    Image of Specification. Front orientation. ZoomedIn view. Contains Border. Round Opening. Tight-Clearance Angled Open-End Wrenches.
    Image of Specification. Front orientation. ZoomedIn view. Contains Border. Hex Opening. Tight-Clearance Angled Open-End Wrenches.

    Round

    Opening

    Hex Opening

    Stop struggling with thin, awkwardly placed fasteners tucked away in confined spaces. Use the 60° or 75° angled head to reach around obstacles and apply more force without constant repositioning. The two heads save you time and reduce the number of tools you need to keep on hand. Also known as ignition wrenches.
    Round Opening—The rounded edges spread force evenly to prevent stripping your fasteners. Use them on hex-head fasteners.
    Hex Opening—Snugly grip the sides rather then the corners of commonly used hex-head fasteners so they won't slip, even when the nuts and bolts are rusted or damaged.
    Black-Oxide Steel—The dark, matte coating protects these wrenches from wear and won't flake off. They offer minimal corrosion resistance, though, so they're best for dry environments.
    Chrome-Plated Steel—The most popular finish, these wrenches won't rust or chip. Although they withstand moisture better than black oxide, they don't hold up to harsh chemicals as well as stainless steel.
    Dull—With a textured finish, these wrenches won't slip out of your hands, even when greasy or oily.
    Polished—The smooth surface is easy to wipe clean of grime. The mirror-like finish lends a high-end look to any toolkit.
    Drive Size
    Overall
    Lg.
    Opening
    Angle
    Head
    Thickness
    Appearance
    Specs. Met
    Each
    Round Opening
     
    Chrome-Plated Steel
    7/32"3"15° × 75°7/64"Dull5412A1300000
    7/32" × 1/4"3"15° × 60°1/8" × 7/64"Dull5413A430000
    15/64" × 13/64"3"15° × 60°1/8" × 7/64"Dull5413A420000
    15/64"3"15° × 75°7/64"Dull5412A140000
    1/4" × 7/32"3"15° × 60°1/8" × 7/64"Dull5413A440000
    1/4"3"15° × 75°7/64"Dull5412A150000
    9/32"3 1/2"15° × 75°9/64"Dull5412A160000
    9/32" × 5/16"3 1/2"15° × 60°5/32"Dull5413A4500000
    5/16"3 1/2"15° × 75°9/64"Polished5412A270000
    11/32"3 3/4"15° × 75°9/64"Dull5412A1800000
    3/8"3 3/4"15° × 75°9/64"Polished5412A2900000
    7/16"4 1/2"15° × 75°11/64"Polished5412A4100000
    1/2"4 1/2"15° × 75°11/64"Polished5412A4200000
    5/8"6 3/4"15° × 60°9/32"Polished5413A240000
    4 mm2 3/4"15° × 75°3/32"Dull8393A4200000
    5 mm3"15° × 75°3/32"Dull8393A4300000
    5.5 mm3"15° × 75°1/8" × 7/64"Dull8393A4400000
    6 mm3 1/8"15° × 75°1/8" × 7/64"Dull8393A4500000
    7 mm3 1/8"15° × 75°1/8"Dull8393A4600000
    8 mm3 5/8"15° × 75°1/8"Dull8393A4700000
    9 mm3 7/8"15° × 75°1/8"Dull8393A4800000
    10 mm4"15° × 75°1/8"Dull8393A4900000
    11 mm4"15° × 75°1/8"Dull8393A5100000
    12 mm4 3/4"15° × 75°5/32" × 9/64"Dull8393A5200000
    13 mm4 3/4"15° × 75°5/32" × 9/64"Dull8393A5300000
    14 mm4 3/4"15° × 75°5/32" × 9/64"Dull8393A5400000
    15 mm5 1/2"15° × 75°3/16" × 11/64"Dull8393A5500000
    17 mm5 1/2"15° × 75°3/16" × 11/64"Dull8393A5700000
     
    Hex Opening
     
    Black-Oxide Steel
    11/32"4 3/4"15° × 60°13/64"ASME B107.10054895A6200000
    3/8"4 3/4"15° × 60°13/64"ASME B107.10054895A6300000
    7/16"5"15° × 60°13/64"ASME B107.10054895A6400000
    1/2"5 1/2"15° × 60°13/64"ASME B107.10054895A6500000
    9/16"6"15° × 60°19/64"ASME B107.10054895A6600000
    5/8"6 1/4"15° × 60°19/64"ASME B107.10054895A6700000
    11/16"7"15° × 60°19/64"ASME B107.10054895A6800000
    3/4"7 1/4"15° × 60°19/64"ASME B107.10054895A6900000
    13/16"7 1/2"15° × 60°19/64"ASME B107.10054895A7100000
    7/8"8 1/4"15° × 60°19/64"ASME B107.10054895A7200000
    15/16"9"15° × 60°19/64"ASME B107.10054895A7300000
    1"9 3/4"15° × 60°19/64"ASME B107.10054895A7400000
    1 1/16"10"15° × 60°19/64"ASME B107.10054895A7500000
    1 1/8"11"15° × 60°19/64"ASME B107.10054895A7600000
    1 3/16"11"15° × 60°19/64"ASME B107.10054895A7700000
    1 1/4"11 1/2"15° × 60°19/64"ASME B107.10054895A7800000
    1 3/8"12 1/2"15° × 60°13/32"ASME B107.10054895A7900000
    1 7/16"12 1/2"15° × 60°13/32"ASME B107.10054895A8100000
    1 1/2"12 1/2"15° × 60°13/32"ASME B107.10054895A8200000
    1 5/8"15 3/4"15° × 60°1/2"ASME B107.10054895A91000000
    1 11/16"16 1/2"15° × 60°1/2"ASME B107.10054895A92000000
    1 3/4"17"15° × 60°1/2"ASME B107.10054895A93000000
    1 13/16"17 3/4"15° × 60°1/2"ASME B107.10054895A94000000
    1 7/8"18 1/2"15° × 60°19/32"ASME B107.10054895A95000000
    2"19 1/4"15° × 60°19/32"ASME B107.10054895A96000000
     
    Chrome-Plated Steel
    11/32"4 3/4"15° × 60°13/64"DullASME B107.1005413A1100000
    3/8"4 3/4"15° × 60°13/64"DullASME B107.1005413A1200000
    7/16"5"15° × 60°13/64"DullASME B107.1005413A1300000
    1/2"5 1/2"15° × 60°13/64"DullASME B107.1005413A1400000
    9/16"6"15° × 60°19/64"DullASME B107.1005413A1500000
    5/8"6 1/4"15° × 60°19/64"DullASME B107.1005413A1600000
    11/16"7"15° × 60°19/64"DullASME B107.1005413A1700000
    3/4"7 1/4"15° × 60°19/64"DullASME B107.1005413A1800000
    13/16"7 1/2"15° × 60°19/64"DullASME B107.1005413A1900000
    7/8"8 1/4"15° × 60°19/64"DullASME B107.1005413A2100000
    15/16"9"15° × 60°19/64"DullASME B107.1005413A2200000
    1"9 3/4"15° × 60°19/64"DullASME B107.1005413A2300000
    1 1/16"10"15° × 60°19/64"DullASME B107.1005413A3100000
    1 1/8"11"15° × 60°19/64"DullASME B107.1005413A3200000
    1 3/16"11"15° × 60°1/2"DullASME B107.1005413A4800000
    1 1/4"11 1/2"15° × 60°19/64"DullASME B107.1005413A3300000
    1 3/8"12 1/2"15° × 60°13/32"DullASME B107.1005413A3400000
    1 7/16"12 1/2"15° × 60°13/32"DullASME B107.1005413A3500000
    1 1/2"12 1/2"15° × 60°13/32"DullASME B107.1005413A3600000
    1 5/8"15 3/4"15° × 60°1/2"DullASME B107.1005413A51000000
    1 11/16"16 1/2"15° × 60°1/2"DullASME B107.1005413A52000000
    1 3/4"17"15° × 60°1/2"DullASME B107.1005413A53000000
    1 13/16"17 3/4"15° × 60°1/2"DullASME B107.1005413A54000000
    1 7/8"18 1/2"15° × 60°19/32"DullASME B107.1005413A55000000
    2"19 1/4"15° × 60°19/32"DullASME B107.1005413A56000000
    9 mm4 3/4"15° × 60°7/32"DullASME B107.1006032A1100000
    10 mm4 3/4"15° × 60°7/32"DullASME B107.1006032A1200000
    11 mm4 3/4"15° × 60°7/32"DullASME B107.1006032A1300000
    12 mm4 3/4"15° × 60°7/32"DullASME B107.1006032A1400000
    13 mm5 1/2"15° × 60°7/32"DullASME B107.1006032A1500000
    14 mm6"15° × 60°1/4"DullASME B107.1006032A1600000
    15 mm6"15° × 60°1/4"DullASME B107.1006032A1700000
    16 mm6 1/4"15° × 60°9/32"DullASME B107.1006032A1800000
    17 mm6 1/4"15° × 60°9/32"DullASME B107.1006032A1900000
    18 mm7"15° × 60°9/32"DullASME B107.1006032A2100000
    19 mm7 1/4"15° × 60°9/32"DullASME B107.1006032A2200000
    20 mm7 1/4"15° × 60°9/32"DullASME B107.1006032A2300000
    21 mm7 1/2"15° × 60°9/32"DullASME B107.1006032A2400000
    22 mm7 1/2"15° × 60°9/32"DullASME B107.1006032A2500000
    23 mm8 1/4"15° × 60°9/32"DullASME B107.1006032A2600000
    24 mm9"15° × 60°9/32"DullASME B107.1006032A2700000
    27 mm10"15° × 60°5/16"DullASME B107.1006032A2800000
    30 mm11"15° × 60°5/16"DullASME B107.1006032A2900000
    32 mm11 1/2"15° × 60°11/32"DullASME B107.1006032A3100000
    34 mm12 1/2"15° × 60°13/32"DullASME B107.1006032A3200000
    36 mm12 1/2"15° × 60°13/32"DullASME B107.1006032A3300000
     

    Tight-Clearance Double Open-End Wrenches

    Image of Product. Front orientation. Open-End Wrenches. Tight-Clearance Double Open-End Wrenches.
    Image of Attribute. Front orientation. Contains Annotated. Tight-Clearance Double Open-End Wrenches.
    Image of Specification. Front orientation. ZoomedIn view. Contains Border. Round Opening. Tight-Clearance Double Open-End Wrenches.

    Round

    Opening

    Twist two different-sized, thin fasteners in the tightest nooks without the hassle of changing wrenches. Drop forged for added strength, these wrenches will be part of your toolbox for life. Also known as tappet wrenches.
    Round Opening—The rounded edges spread force evenly to prevent stripping your fasteners. Use them on hex-head fasteners.
    Chrome-Plated Steel—The most popular finish, these wrenches won't rust or chip. Although they withstand moisture better than black oxide, they don't hold up to harsh chemicals as well as stainless steel.
    Dull—With a textured finish, these wrenches won't slip out of your hands, even when greasy or oily.
    Polished—The smooth surface is easy to wipe clean of grime. The mirror-like finish lends a high-end look to any toolkit.
    Drive Size
    Overall
    Lg.
    Opening
    Angle
    Head
    Thickness
    Appearance
    Each
    Round Opening
     
    Chrome-Plated Steel
    1/2" × 9/16"10"15°3/16" × 11/64"Dull5411A14000000
    9/16" × 5/8"10"15°3/16" × 11/64"Dull5411A1500000
    11/16" × 3/4"10"15°7/32" × 13/64"Dull5411A2300000
    13/16" × 7/8"10"15°7/32" × 13/64"Dull5411A2200000
    6 mm × 7 mm5 7/8"15°3/32"Dull54755A5100000
    8 mm × 9 mm6 7/8"15°3/32"Polished54755A5200000
    10 mm × 11 mm6 7/8"15°3/32"Polished54755A5300000
    12 mm × 13 mm8 1/4"15°9/64"Dull54755A5400000
    14 mm × 15 mm8 1/4"15°9/64"Dull54755A5500000
    16 mm × 17 mm9 7/8"15°11/64"Dull54755A5600000
    18 mm × 19 mm9 7/8"15°11/64"Dull54755A5700000
     

    Double Open-End Wrench Sets

    Image of Product. Front orientation. Open-End Wrenches. Double Open-End Wrench Sets, Fabric Roll-Up Pouch.

    Fabric Roll-Up Pouch

    Image of Product. Front orientation. Open-End Wrenches. Double Open-End Wrench Sets, Plastic Roll-Up Pouch.

    Plastic Roll-Up

    Pouch

    Image of Attribute. Front orientation. Contains Annotated. Double Open-End Wrench Sets.
    Image of Specification. Front orientation. ZoomedIn view. Contains Border. Round Opening. Double Open-End Wrench Sets.

    Round

    Opening

    Keep a range of sizes on hand to switch between two different-sized fasteners without swapping out your wrenches. The two heads save you time and reduce the number of tools you need to keep on hand. Drop forged for added strength, these wrenches will be part of your toolbox for life.
    Round Opening—The rounded edges spread force evenly to prevent stripping your fasteners. Use them on hex-head fasteners.
    Chrome-Plated Steel—The most popular finish, these wrenches won't rust or chip. Although they withstand moisture better than black oxide, they don't hold up to harsh chemicals as well as stainless steel.
    Corrosion-Resistant High-Strength 17-4 PH Stainless Steel—The strongest stainless steel open-end wrenches we offer withstand force without deforming. They won’t rust in wet and outdoor environments, plus they resist mild acids.
    Dull—With a textured finish, these wrenches won't slip out of your hands, even when greasy or oily.
    Polished—The smooth surface is easy to wipe clean of grime. The mirror-like finish lends a high-end look to any toolkit.
    No. of
    Pieces
    Sizes Included
    Overall Lg.
    Opening
    Angle
    Appearance
    Container Type
    Specs. Met
    Each
    Round Opening
     
    Chrome-Plated Steel
    61/2" × 9/16"
    1/4" × 5/16"
    3/4" × 13/16"
    3/8" × 7/16"
    5/8" × 11/16"
    7/8" × 15/16"
    4 1/2" to 10 5/8"15°PolishedFabric Roll-Up Pouch5428A180000000
    84 mm × 5 mm
    6 mm × 7 mm
    8 mm × 9 mm
    10 mm × 11 mm
    12 mm × 13 mm
    14 mm × 15 mm
    16 mm × 17 mm
    18 mm × 19 mm
    4" to 8 3/4"15°DullPlastic Roll-Up PouchDIN 31105437A1000000
    101 1/8" × 1 1/4"
    1 3/8" × 1 7/16" (Dull Appearance)
    1/16" × 1 1/4"
    1/2" × 9/16"
    1/4" × 5/16"
    3/4" × 13/16"
    3/8" × 7/16"
    5/8" × 11/16"
    7/8" × 15/16"
    15/16" × 1"
    4 1/2" to 17 1/4"15°PolishedFabric Roll-Up Pouch5436A9000000
    106 mm × 7 mm
    8 mm × 9 mm
    10 mm × 11 mm
    12 mm × 13 mm
    14 mm × 15 mm
    16 mm × 17 mm
    18 mm × 19 mm
    20 mm × 22 mm
    21 mm × 23 mm
    24 mm × 26 mm (Dull Appearance)
    4 1/2" to 12 3/8"15°PolishedFabric Roll-Up PouchASME B107.1005420A55000000
    121 3/8" × 1 7/16"
    1/16" × 1 1/4"
    1/2" × 1 5/8"
    1/4" × 1 5/16"
    1/8" × 1 3/16"
    1/2" × 9/16"
    1/4" × 5/16"
    3/4" × 13/16"
    3/8" × 7/16"
    5/8" × 11/16"
    7/8" × 15/16"
    15/16" × 1"
    4 1/2" to 17"15°DullPlastic Roll-Up Pouch5430A4000000
    126 mm × 7 mm
    8 mm × 9 mm
    10 mm × 11 mm
    12 mm × 13 mm
    14 mm × 15 mm
    16 mm × 17 mm
    18 mm × 19 mm
    20 mm × 22 mm
    21 mm × 23 mm
    24 mm × 26 mm
    25 mm × 28 mm
    27 mm × 30 mm
    4 1/2" to 11 7/8"15°DullPlastic Roll-Up Pouch5420A51000000
     
    Corrosion-Resistant High-Strength 17-4 PH Stainless Steel
    81 1/8" × 1 1/4"
    1" × 1 1/16"
    1/2" × 9/16"
    1/4" × 5/16"
    3/4" × 13/16"
    3/8" × 7/16"
    5/8" × 11/16"
    7/8" × 15/16"
    4 3/4" to 11 1/8"15°54565A1900000000
     

    Tight-Clearance Angled Open-End Wrench Sets

    Image of Product. Front orientation. Open-End Wrenches. Tight-Clearance Angled Open-End Wrench Sets.
    Image of Attribute. Front orientation. Contains Annotated. Tight-Clearance Angled Open-End Wrench Sets.
    Image of Specification. Front orientation. ZoomedIn view. Contains Border. Round Opening. Tight-Clearance Angled Open-End Wrench Sets.
    Image of Specification. Front orientation. ZoomedIn view. Contains Border. Hex Opening. Tight-Clearance Angled Open-End Wrench Sets.

    Round

    Opening

    Hex Opening

    Keep a collection of sizes handy to turn thin, awkwardly placed fasteners tucked away in confined spaces. Use the 60° or 75° angled head to reach around obstacles and apply more force without constant repositioning. The two heads save you time and reduce the number of tools you need to keep on hand. Also known as ignition wrenches.
    Round Opening—The rounded edges spread force evenly to prevent stripping your fasteners. Use them on hex-head fasteners.
    Hex Opening—Snugly grip the sides rather then the corners of commonly used hex-head fasteners so they won't slip, even when the nuts and bolts are rusted or damaged.
    Black-Oxide Steel—The dark, matte coating protects these wrenches from wear and won't flake off. They offer minimal corrosion resistance, though, so they're best for dry environments.
    Chrome-Plated Steel—The most popular finish, these wrenches won't rust or chip. Although they withstand moisture better than black oxide, they don't hold up to harsh chemicals as well as stainless steel.
    Dull—With a textured finish, these wrenches won't slip out of your hands, even when greasy or oily.
    No. of
    Pieces
    Sizes Included
    Overall Lg.
    Opening
    Angle
    Appearance
    Container Type
    Specs. Met
    Each
    Round Opening
     
    Chrome-Plated Steel
    91/2"
    1/4"
    3/8"
    5/16"
    7/16"
    7/32"
    9/32"
    11/32"
    15/64"
    3" to 5 3/4"15° × 75°DullFabric Roll-Up Pouch5431A21000000
    163.2 mm
    4 mm
    5 mm
    5.5 mm
    6 mm
    7 mm
    8 mm
    9 mm
    10 mm
    11 mm
    12 mm
    13 mm
    14 mm
    15 mm
    16 mm
    17 mm
    2 3/4" to 5 1/2"15° × 75°DullFabric Roll-Up Pouch8393A72000000
     
    Hex Opening
     
    Black-Oxide Steel
    181 1/16"
    1 1/2"
    1 1/4"
    1 1/8"
    1 3/8"
    1 7/16"
    1"
    1/2"
    3/4"
    3/8"
    5/8"
    7/16"
    7/8"
    9/16"
    11/16"
    11/32"
    13/16"
    15/16"
    4 3/4" to 12 1/2"15° × 60°Plastic Roll-Up PouchASME B107.10054895A86000000
     
    Chrome-Plated Steel
    1510 mm
    11 mm
    12 mm
    13 mm
    14 mm
    15 mm
    16 mm
    17 mm
    18 mm
    19 mm
    21 mm
    22 mm
    24 mm
    27 mm
    30 mm
    4 3/4" to 11"15° × 60°DullPlastic Roll-Up PouchASME B107.1006032A34000000
    181 1/16"
    1 1/2"
    1 1/4"
    1 1/8"
    1 3/8"
    1 7/16"
    1"
    1/2"
    3/4"
    3/8"
    5/8"
    7/16"
    7/8"
    9/16"
    11/16"
    11/32"
    13/16"
    15/16"
    4 3/4" to 12 1/2"15° × 60°DullPlastic Roll-Up PouchASME B107.1005433A14000000
     

    Sure-Grip Open-End Wrenches

    Image of Product. Front orientation. Open-End Wrenches. Sure-Grip Open-End Wrenches.
    Image of Attribute. Front orientation. Contains Annotated. Sure-Grip Open-End Wrenches.
    Image of Attribute. Front orientation. Contains Annotated. Sure-Grip Open-End Wrenches.
    Image of Specification. Front orientation. ZoomedIn view. Contains Border. Hex Sure-Grip Opening. Sure-Grip Open-End Wrenches.
    Image of Specification. Front orientation. ZoomedIn view. Contains Border. 12-Point Sure-Grip Opening. Sure-Grip Open-End Wrenches.

    Hex

    Sure-Grip

    Opening

    12-Point

    Sure-Grip

    Opening

    Image of Specification. Front orientation. ZoomedIn view. Contains Border. Round Opening. Sure-Grip Open-End Wrenches.

    Round

    Opening

    Get a firm hold on flare nuts and fittings to create leak-tight seals on tubing without cracking it. The heads on these wrenches have recessed corners to distribute turning force more evenly than standard wrenches, preventing stripping and slipping. They're well-suited for tight spots on refrigeration, brake, fuel, or hydraulic lines. Also known as flare-nut or line wrenches.
    Hex Sure-Grip Opening—Avoid rounding off the corners of hex-head fasteners. These wrenches won't slip, even when nuts and bolts are rusted or damaged, since they grip the sides rather than the corners.
    Hex Sure-Grip and Round Openings—One end snugly grips sides rather than corners of hex-head fasteners so they won’t slip, even when nuts and bolts are rusted or damaged. The other end spreads force evenly with round edges to prevent stripping your fasteners.
    12-Point Sure-Grip Opening—These wrenches slide onto hex-head fasteners at more angles than those with hex sure-grip openings for quicker engagement. However, they’re more prone to slipping because they make less direct contact with the surfaces.
    Chrome-Plated Steel—The most popular finish, these wrenches won't rust or chip. Although they withstand moisture better than black oxide, they don't hold up to harsh chemicals as well as stainless steel.
    Dull—With a textured finish, these wrenches won't slip out of your hands, even when greasy or oily.
    Polished—The smooth surface is easy to wipe clean of grime. The mirror-like finish lends a high-end look to any toolkit.
    Drive Size
    Overall
    Lg.
    Head Style
    Opening
    Angle
    Head Offset
    Angle
    Head Thickness
    Appearance
    Specs. Met
    Each
    Hex Sure-Grip Opening
     
    Chrome-Plated Steel
    1/4" × 5/16"4 7/8"Offset15°15°1/4" × 9/32"DullASME B107.1008537A49000000
    3/8" × 7/16"5 13/16"Offset15°15°5/16" × 11/32"DullASME B107.1008537A4100000
    1/2" × 9/16"6 13/16"Offset15°15°3/8" × 13/32"DullASME B107.1008537A4200000
    5/8" × 11/16"7 3/4"Offset15°15°7/16" × 15/32"DullASME B107.1008537A4300000
    3/4" × 1"9 1/2"Offset15°15°1/2" × 5/8"DullASME B107.1008537A4700000
    7/8" × 1 1/8"10 1/2"Offset15°15°9/16" × 11/16"DullASME B107.1008537A4800000
    7 mm × 8 mm5 3/4"OffsetStraight15°11/32" × 21/64"DullASME B107.1007192A1700000
    9 mm × 11 mm6 3/8"OffsetStraight15°13/32" × 25/64"DullASME B107.1007192A1100000
    10 mm × 12 mm7"OffsetStraight15°13/32" × 25/64"DullASME B107.1007192A1200000
    13 mm × 14 mm7 5/8"OffsetStraight15°15/32" × 29/64"DullASME B107.1007192A1300000
    15 mm × 17 mm8"OffsetStraight15°1/2" × 31/64"DullASME B107.1007192A1400000
    16 mm × 18 mm8 7/8"OffsetStraight15°17/32" × 33/64"DullASME B107.1007192A1500000
    19 mm × 21 mm9 1/2"OffsetStraight15°19/32" × 37/64"DullASME B107.1007192A1600000
     
    Hex Sure-Grip and Round Openings
     
    Chrome-Plated Steel
    3/8"5 3/4"Offset × Standard30° × 15°15°11/32" × 3/8"DullASME B107.1005442A1100000
    7/16"6"Offset × Standard30° × 15°15°3/8" × 13/32"DullASME B107.1005442A1200000
    1/2"6 1/2"Offset × Standard30° × 15°15°3/8" × 13/32"DullASME B107.1005442A1300000
    9/16"7"Offset × Standard30° × 15°15°7/16" × 15/32"DullASME B107.1005442A1400000
    5/8"7 5/8"Offset × Standard30° × 15°15°7/16" × 15/32"DullASME B107.1005442A1500000
    11/16"8 3/4"Offset × Standard30° × 15°15°1/2" × 17/32"DullASME B107.1005442A1600000
    3/4"9 1/4"Offset × Standard30° × 15°15°1/2" × 17/32"DullASME B107.1005442A1700000
     
    12-Point Sure-Grip Opening
     
    Chrome-Plated Steel
    3/8" × 7/16"6 1/4"OffsetStraight15°11/32" × 3/8"DullASME B107.10054745A6300000
    1/2" × 9/16"7 1/2"OffsetStraight15°3/8" × 7/16"DullASME B107.10054745A6400000
    5/8" × 11/16"8 3/4"OffsetStraight15°1/2" × 31/64"DullASME B107.10054745A6500000
    1" × 1 1/8"10 3/4"Standard15°53/64"PolishedASME B107.10054745A7100000
    7 mm × 8 mm5 3/4"OffsetStraight15°11/32" × 21/64"DullASME B107.10054855A3100000
    10 mm × 12 mm7"OffsetStraight15°13/32" × 25/64"DullASME B107.10054855A3300000
    13 mm × 14 mm7 5/8"OffsetStraight15°15/32" × 29/64"DullASME B107.10054855A3400000
    15 mm × 17 mm8"OffsetStraight15°1/2" × 31/64"DullASME B107.10054855A3500000
    22 mm × 24 mm9 1/4"Offset15°15°43/64" × 5/8"DullDIN 311854855A3800000
    24 mm × 27 mm10 1/8"Offset15°15°45/64" × 43/64"DullDIN 311854855A3900000
    30 mm × 32 mm11"Offset15°15°29/32" × 53/64"DullDIN 311854855A42000000
     

    Stubby Open-End Wrenches

    Image of Product. Front orientation. Open-End Wrenches. Stubby Open-End Wrenches.
    Image of Attribute. Front orientation. Contains Annotated. Stubby Open-End Wrenches.
    Image of Specification. Front orientation. ZoomedIn view. Contains Border. Round Opening. Stubby Open-End Wrenches.

    Round

    Opening

    These short open-end wrenches are perfect for spots that don't have enough clearance for full-sized tools. Their compact design lets you make full turns without hitting or disassembling surrounding parts. They are often used to fasten bolts in cramped engine compartments and tight plumbing jobs. For tasks that require more muscle, longer wrenches may be necessary.
    Round Opening—The rounded edges spread force evenly to prevent stripping your fasteners. Use them on hex-head fasteners.
    Chrome-Plated Steel—The most popular finish, these wrenches won't rust or chip. Although they withstand moisture better than black oxide, they don't hold up to harsh chemicals as well as stainless steel.
    Dull—With a textured finish, these wrenches won't slip out of your hands, even when greasy or oily.
    Drive Size
    Overall
    Lg.
    Opening
    Angle
    Head
    Thickness
    Appearance
    Each
    Round Opening
     
    Chrome-Plated Steel
    3/16" × 7/32"2 7/8"15°1/8"Dull55065A61000000
    1/4" × 9/32"3 1/8"15°1/8"Dull55065A6200000
    5/16" × 11/32"3 1/2"15°5/32" × 1/8"Dull55065A6300000
    3/8" × 7/16"3 3/4"15°5/32" × 1/8"Dull55065A6400000
    1/2" × 9/16"4 3/8"15°3/16"Dull55065A6500000
    6 mm × 7 mm3 1/8"15°3/32"Dull5739A300000
    10 mm × 11 mm4"15°1/8"Dull5739A500000
    12 mm × 13 mm4 3/8"15°1/8"Dull5739A600000
     

    Sure-Grip Open-End Wrench Sets

    Image of Product. Front orientation. Open-End Wrenches. Sure-Grip Open-End Wrench Sets.
    Image of Attribute. Front orientation. Contains Annotated. Sure-Grip Open-End Wrench Sets.
    Image of Attribute. Front orientation. Contains Annotated. Sure-Grip Open-End Wrench Sets.
    Image of Specification. Front orientation. ZoomedIn view. Contains Border. Hex Sure-Grip Opening. Sure-Grip Open-End Wrench Sets.
    Image of Specification. Front orientation. ZoomedIn view. Contains Border. Round Opening. Sure-Grip Open-End Wrench Sets.

    Hex

    Sure-Grip

    Opening

    Round

    Opening

    Get a firm hold on various sizes of flare nuts and fittings to create leak-tight seals on tubing without cracking it. The heads on these wrenches have recessed corners to distribute turning force more evenly than standard wrenches, preventing stripping and slipping. They're well-suited for tight spots on refrigeration, brake, fuel, or hydraulic lines. Also known as flare-nut or line wrenches.
    Hex Sure-Grip Opening—Avoid rounding off the corners of hex-head fasteners. These wrenches won't slip, even when nuts and bolts are rusted or damaged, since they grip the sides rather than the corners.
    Hex Sure-Grip and Round Openings—One end snugly grips sides rather than corners of hex-head fasteners so they won’t slip, even when nuts and bolts are rusted or damaged. The other end spreads force evenly with round edges to prevent stripping your fasteners.
    Chrome-Plated Steel—The most popular finish, these wrenches won't rust or chip. Although they withstand moisture better than black oxide, they don't hold up to harsh chemicals as well as stainless steel.
    Dull—With a textured finish, these wrenches won't slip out of your hands, even when greasy or oily.
    No. of
    Pieces
    Sizes Included
    Overall Lg.
    Head Style
    Head Offset
    Angle
    Opening
    Angle
    Appearance
    Container Type
    Each
    Hex Sure-Grip Opening
     
    Chrome-Plated Steel
    51/2" × 9/16"
    3/4" × 1"
    3/8" × 7/16"
    5/8" × 11/16"
    7/8" × 1 1/8"
    5 3/4" to 10 1/2"Offset15°15°DullFabric Roll-Up Pouch8537A110000000
    57 mm × 8 mm
    9 mm × 11 mm
    10 mm × 12 mm
    13 mm × 14 mm
    15 mm × 17 mm
    5 3/4" to 8"Offset15°StraightDullFabric Roll-Up Pouch7192A44000000
     
    Hex Sure-Grip and Round Openings
     
    Chrome-Plated Steel
    71/2"
    3/4"
    3/8"
    5/8"
    7/16"
    9/16"
    11/16"
    5 3/4" to 9 1/4"Offset × Standard15°30° × 15°DullFabric Roll-Up Pouch5442A24000000
     

    Tight-Clearance Double Open-End Wrench Sets

    Image of Product. Front orientation. Open-End Wrenches. Tight-Clearance Double Open-End Wrench Sets, Fabric Roll-Up Pouch.

    Fabric Roll-Up

    Pouch

    Image of Product. Front orientation. Open-End Wrenches. Tight-Clearance Double Open-End Wrench Sets, Plastic Rack.

    Plastic Rack

    Image of Attribute. Front orientation. Contains Annotated. Tight-Clearance Double Open-End Wrench Sets.
    Image of Specification. Front orientation. ZoomedIn view. Contains Border. Round Opening. Tight-Clearance Double Open-End Wrench Sets.

    Round

    Opening

    Keep multiple sizes on hand to twist two different-sized, thin fasteners in the tightest nooks without the hassle of changing tools. Drop forged for added strength, these wrenches will be part of your toolbox for life. Also known as tappet wrenches.
    Round Opening—The rounded edges spread force evenly to prevent stripping your fasteners. Use them on hex-head fasteners.
    Chrome-Plated Steel—The most popular finish, these wrenches won't rust or chip. Although they withstand moisture better than black oxide, they don't hold up to harsh chemicals as well as stainless steel.
    Dull—With a textured finish, these wrenches won't slip out of your hands, even when greasy or oily.
    No. of
    Pieces
    Sizes Included
    Overall Lg.
    Opening
    Angle
    Appearance
    Container Type
    Each
    Round Opening
     
    Chrome-Plated Steel
    68 mm × 9 mm
    10 mm × 11 mm
    12 mm × 13 mm
    14 mm × 15 mm
    16 mm × 17 mm
    18 mm × 19 mm
    6 7/8" to 9 7/8"15°DullFabric Roll-Up Pouch54755A610000000
    81 1/16" x 1 1/8"
    1 3/16" x 1 1/4"
    1/2" x 9/16"
    1/4" x 5/16"
    3/8" x 7/16"
    5/8" x 3/4"
    13/16" x 7/8"
    15/16" x 1"
    15 1/4"15°DullPlastic Rack5411A331000000
     

    Nonsparking Open-End Wrenches

    Image of Product. Front orientation. Open-End Wrenches. Nonsparking Open-End Wrenches.
    Image of Attribute. Front orientation. Contains Annotated. Nonsparking Open-End Wrenches.
    Image of Specification. Front orientation. ZoomedIn view. Contains Border. Round Opening. Nonsparking Open-End Wrenches.

    Round

    Opening

    Safely turn nuts and bolts in hazardous environments with flammable vapors, liquids, or dust. Made of FM-approved aluminum bronze, these wrenches won't create sparks even when scraped, struck, or dropped. All help you meet OSHA requirements for nonsparking tools and won’t weaken or rust when exposed to moisture and chemicals. Use them everywhere from oil refineries to chemicals plants.
    Warning: Do not use these tools in direct contact with acetylene.
    Round Opening—The rounded edges spread force evenly to prevent stripping your fasteners. Use them on hex-head fasteners.
    Drive Size
    Overall
    Lg.
    Opening
    Angle
    Head
    Thickness
    Certification
    Each
    Round Opening
     
    Aluminum Bronze
    1/4" × 5/16"5 1/4"15°1/4"FM Approved
    6499A31000000
    3/8" × 7/16"5 1/4"15°1/4"FM Approved
    6499A3200000
    7/16" × 1/2"5 1/4"15°1/4"FM Approved
    6499A1100000
    1/2" × 5/8"6"15°1/4"FM Approved
    6499A1200000
    9/16" × 5/8"6"15°5/16"FM Approved
    6499A1300000
    9/16" × 3/4"6 3/4"15°5/16"FM Approved
    6499A1400000
    11/16" × 7/8"8 1/4"15°3/8"FM Approved
    6499A3600000
    3/4" × 13/16"8 1/8"15°3/8"FM Approved
    6499A4100000
    3/4" × 7/8"8 1/8"15°3/8"FM Approved
    6499A3700000
    7/8" × 15/16"9 1/4"15°7/16"FM Approved
    6499A1700000
    1" × 1 1/8"10 1/4"15°1/2"FM Approved
    6499A18000000
    1 1/16" × 1 1/4"12 1/2"15°1/2"FM Approved
    6499A19000000
    1 1/8" × 1 5/16"12 1/2"15°1/2"FM Approved
    6499A21000000
     

    Stubby Open-End Wrench Sets

    Image of Product. Front orientation. Open-End Wrenches. Stubby Open-End Wrench Sets.
    Image of Attribute. Front orientation. Contains Annotated. Stubby Open-End Wrench Sets.
    Image of Specification. Front orientation. ZoomedIn view. Contains Border. Round Opening. Stubby Open-End Wrench Sets.

    Round

    Opening

    Assorted sizes of these short open-end wrenches are perfect for spots that don't have enough clearance for full-sized tools. Their compact design lets you make full turns without hitting or disassembling surrounding parts. They are often used to fasten bolts in cramped engine compartments and tight plumbing jobs. For tasks that require more muscle, longer wrenches may be necessary.
    Round Opening—The rounded edges spread force evenly to prevent stripping your fasteners. Use them on hex-head fasteners.
    Chrome-Plated Steel—The most popular finish, these wrenches won't rust or chip. Although they withstand moisture better than black oxide, they don't hold up to harsh chemicals as well as stainless steel.
    Dull—With a textured finish, these wrenches won't slip out of your hands, even when greasy or oily.
    No. of
    Pieces
    Sizes Included
    Overall Lg.
    Opening
    Angle
    Appearance
    Container Type
    Specs.
    Met
    Each
    Round Opening
     
    Chrome-Plated Steel
    51/2" × 9/16"
    1/4" × 9/32"
    3/16" × 7/32"
    3/8" × 7/16"
    5/16" × 11/32"
    2 7/8" to 4 3/8"15°DullPlastic Roll-Up Pouch55065A71000000
    63.2 mm × 5.5 mm
    4 mm × 5 mm
    6 mm × 7 mm
    8 mm × 9 mm
    10 mm × 11 mm
    12 mm × 13 mm
    2 3/4" to 4 3/8"15°DullPlastic Roll-Up PouchISO 33185739A1100000
     
    back to top