Number of Grooves Number of Grooves | Show |
---|
|
OD OD |
---|
Bore Type Bore Type |
---|
![]() | Bushing |
Pitch Diameter Pitch Diameter |
---|
For Belt Type For Belt Type |
---|
|
For Bushing Type For Bushing Type |
---|
|
Width Width |
---|
|
|
|
Material Material |
---|
|
DFARS (Defense Acquisition Regulations Supplement) DFARS (Defense AcquisitionRegulations Supplement) |
---|
Application Application |
---|
|
REACH (Registration, Evaluation, Authorization and Restriction of Chemicals) REACH (Registration,Evaluation, Authorization and Restriction of Chemicals) |
---|
|
RoHS (Restriction of Hazardous Substances) RoHS (Restriction ofHazardous Substances) |
---|
|
Capacity Capacity |
---|
|
Housing Material Housing Material |
---|
|
Fabrication Fabrication |
---|
|
About Pulleys
More
Quick-Disconnect (QD) Bushing-Bore V-Belt Pulleys

The same pulley can be used with different shaft diameters; choose a compatible quick-disconnect bushing with the bore size you need.
For technical drawings and 3-D models, click on a part number.

No. of Grooves | OD | Pitch Dia. (For Belt Trade Size) | Wd. | Groove Dp. | For Bushing Style | Material | Body Type | Each | |
2 | 3.75" | 3" (A, AX), 3.4" (B, BX) | 1 3/4" | 0.58" | SH | Steel | Solid | 00000000 | 000000 |
2 | 3.95" | 3.2" (A, AX), 3.6" (B, BX) | 1 3/4" | 0.58" | SH | Steel | Solid | 00000000 | 00000 |
2 | 4.15" | 3.4" (A, AX), 3.8" (B, BX) | 1 3/4" | 0.58" | SH | Steel | Solid | 00000000 | 00000 |
2 | 4.35" | 3.6" (A, AX), 4" (B, BX) | 1 3/4" | 0.58" | SH | Steel | Solid | 00000000 | 00000 |
2 | 4.55" | 3.8" (A, AX), 4.2" (B, BX) | 1 3/4" | 0.58" | SH | Steel | Solid | 00000000 | 00000 |
2 | 4.75" | 4" (A, AX), 4.4" (B, BX) | 1 3/4" | 0.58" | SH | Steel | Solid | 00000000 | 00000 |
2 | 4.95" | 4.2" (A, AX), 4.6" (B, BX) | 1 3/4" | 0.612" | SDS | Steel | Solid | 00000000 | 00000 |
2 | 5.15" | 4.4" (A, AX), 4.8" (B, BX) | 1 3/4" | 0.612" | SDS | Steel | Solid | 00000000 | 00000 |
2 | 5.34" | 4.6" (A, AX), 5" (B, BX) | 1 3/4" | 0.612" | SDS | Steel | Solid | 00000000 | 00000 |
2 | 5.55" | 4.8" (A, AX), 5.2" (B, BX) | 1 3/4" | 0.612" | SDS | Steel | Solid | 00000000 | 00000 |
2 | 5.75" | 5" (A, AX), 5.4" (B, BX) | 1 3/4" | 0.612" | SDS | Steel | Solid | 00000000 | 00000 |
2 | 5.95" | 5.2" (A, AX), 5.6" (B, BX) | 1 3/4" | 0.612" | SDS | Steel | Solid | 00000000 | 00000 |
2 | 6.15" | 5.4" (A, AX), 5.8" (B, BX) | 1 3/4" | 0.612" | SDS | Steel | Solid | 00000000 | 00000 |
2 | 6.34" | 5.6" (A, AX), 6" (B, BX) | 1 3/4" | 0.612" | SDS | Steel | Solid | 00000000 | 00000 |
2 | 6.54" | 5.8" (A, AX), 6.2" (B, BX) | 1 3/4" | 0.612" | SDS | Steel | Solid | 00000000 | 00000 |
2 | 6.75" | 6" (A, AX), 6.4" (B, BX) | 1 3/4" | 0.612" | SDS | Steel | Solid | 00000000 | 00000 |
2 | 6.95" | 6.2" (A, AX), 6.6" (B, BX) | 1 3/4" | 0.612" | SDS | Steel | Solid | 00000000 | 000000 |
2 | 7.15" | 6.4" (A, AX), 6.8" (B, BX) | 1 3/4" | 0.62" | SDS | Cast Iron | Solid | 00000000 | 00000 |
2 | 7.35" | 6.6" (A, AX), 7" (B, BX) | 1 3/4" | 0.62" | SK | Cast Iron | Solid | 00000000 | 000000 |
2 | 7.75" | 7" (A, AX), 7.4" (B, BX) | 1 3/4" | 0.62" | SK | Cast Iron | Solid | 00000000 | 00000 |
2 | 8.35" | 7.6" (A, AX), 8" (B, BX) | 1 3/4" | 0.62" | SK | Cast Iron | Solid | 00000000 | 00000 |
2 | 8.95" | 8.2" (A, AX), 8.6" (B, BX) | 1 3/4" | 0.62" | SK | Cast Iron | Solid | 00000000 | 00000 |
2 | 9.75" | 9" (A, AX), 9.4" (B, BX) | 1 3/4" | 0.62" | SK | Cast Iron | Solid | 00000000 | 00000 |
2 | 11.35" | 10.6" (A, AX), 11" (B, BX) | 1 3/4" | 0.62" | SK | Cast Iron | Spoked | 00000000 | 000000 |
2 | 12.75" | 12" (A, AX), 12.4" (B, BX) | 1 3/4" | 0.58" | SK | Cast Iron | Spoked | 00000000 | 000000 |
Taper-Lock Bushing-Bore V-Belt Pulleys

Mount these pulleys with a taper-lock bushing for a tight, wobble-free hold on your shaft. These pulleys transfer force from the shaft to a V-belt in a power transmission system, and also help with misalignment. Made of cast iron, these pulleys are durable and resist wear.
Depending on the taper-lock bushing you choose, the same pulley can be used with different shaft diameters.
For technical drawings and 3-D models, click on a part number.

No. of Grooves | OD, mm | Pitch Dia., mm | Wd., mm | Overall Wd., mm | Groove Dp., mm | For Bushing Style | Material | Body Type | Each | |
2 | 72.6 | 67 | 35 | 35 | 13.8 | 1108 | Cast Iron | Solid | 00000000 | 000000 |
2 | 76.6 | 71 | 35 | 35 | 13.8 | 1108 | Cast Iron | Solid | 00000000 | 00000 |
2 | 85.6 | 80 | 35 | 35 | 13.8 | 1210 | Cast Iron | Solid | 00000000 | 00000 |
2 | 90.6 | 85 | 35 | 35 | 13.8 | 1210 | Cast Iron | Solid | 0000000 | 00000 |
2 | 95.6 | 90 | 35 | 35 | 13.8 | 1610 | Cast Iron | Solid | 00000000 | 00000 |
2 | 100.6 | 95 | 35 | 35 | 13.8 | 1610 | Cast Iron | Solid | 0000000 | 00000 |
2 | 105.6 | 100 | 35 | 35 | 13.8 | 1610 | Cast Iron | Solid | 00000000 | 00000 |
2 | 111.6 | 106 | 35 | 35 | 13.8 | 1610 | Cast Iron | Solid | 00000000 | 00000 |
2 | 130.6 | 125 | 35 | 35 | 13.8 | 1610 | Cast Iron | Solid | 00000000 | 00000 |
2 | 137.6 | 132 | 35 | 35 | 13.8 | 2012 | Cast Iron | Solid | 0000000 | 00000 |
2 | 145.6 | 140 | 35 | 35 | 13.8 | 2012 | Cast Iron | Solid | 00000000 | 00000 |
2 | 155.6 | 150 | 35 | 35 | 13.8 | 2012 | Cast Iron | Solid | 00000000 | 00000 |
2 | 165.6 | 160 | 35 | 35 | 13.8 | 2012 | Cast Iron | Solid | 00000000 | 00000 |
2 | 195.6 | 190 | 35 | 35 | 13.8 | 2012 | Cast Iron | Solid | 00000000 | 000000 |

No. of Grooves | OD, mm | Pitch Dia., mm | Wd., mm | Overall Wd., mm | Groove Dp., mm | For Bushing Style | Material | Body Type | Each | |
2 | 67 | 63 | 28 | 28 | 11 | 1108 | Cast Iron | Solid | 00000000 | 000000 |
2 | 89 | 85 | 28 | 28 | 11 | 1610 | Cast Iron | Solid | 00000000 | 00000 |
2 | 104 | 100 | 28 | 28 | 11 | 1610 | Cast Iron | Solid | 00000000 | 00000 |
2 | 129 | 125 | 28 | 28 | 11 | 1610 | Cast Iron | Solid | 00000000 | 00000 |
2 | 136 | 132 | 28 | 28 | 11 | 1610 | Cast Iron | Solid | 00000000 | 00000 |
2 | 174 | 170 | 28 | 32 | 11 | 2012 | Cast Iron | Solid | 00000000 | 00000 |
2 | 228 | 224 | 28 | 32 | 11 | 2012 | Cast Iron | Solid | 00000000 | 000000 |
2 | 284 | 280 | 28 | 32 | 11 | 2012 | Cast Iron | Solid | 0000000 | 000000 |
Mounted Pulleys for Wire Rope—For Horizontal Pulling




Mount these pulleys to a flat surface to assist with horizontal pulling or to guide a rope.
Pulleys with two grooves are for use where multiple pulleys move a single load, such as block and tackle systems. They require about half the force of a single-groove pulley to move the same load.
For technical drawings and 3-D models, click on a part number.
Mounting Hole | ||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
For Rope Dia. | Capacity, lbs. | OD | Wd. | Overall Lg. | Overall Ht. | Material | Housing Material | No. of | Dia. | Ctr.-to-Ctr. (A) | Ctr.-to-Ctr. (B) | Each | ||
Double-Groove Without Bearing | ||||||||||||||
6 | 3/16" | Not Rated | 2 1/2" | 1 7/16" | 3 3/4" | 2 3/4" | Steel | Steel | 4 | 3/16" | 3 1/4" | 7/8" | 0000000 | 000000 |
6 | 1/4" | Not Rated | 3 1/4" | 1 7/8" | 5" | 3 1/2" | Steel | Steel | 4 | 1/4" | 4 1/8" | 1 1/16" | 0000000 | 00000 |
7 | 1/4" | Not Rated | 3 1/4" | 1 7/8" | 5" | 3 1/4" | Steel | Steel | 4 | 3/16" | 4 7/16" | 3/4" | 0000000 | 00000 |
Hanging Pulleys for Wire Rope—For Horizontal Pulling


Hang these pulleys from hooks, screws, and bolts to assist with horizontal pulling or to guide a rope.
Pulleys with two grooves are for use where multiple pulleys move a single load, such as block and tackle systems. They require about half the force of a single-groove pulley to move the same load. They have a bracket on the bottom for tying off one end of your wire rope.
Stainless steel is the most corrosion resistant.
For technical drawings and 3-D models, click on a part number.
For Rope Dia. | Capacity, lbs. | OD | Wd. | Overall Lg. | Overall Ht. | Eye Dia. | Eye Thick. | Material | Housing Material | Each | ||
Double-Groove Without Bearing | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
Swivel Eye | ||||||||||||
D | 5/16" | 1,100 | 1" | 1 31/32" | 1" | 3 3/4" | 1/2" | 1/4" | Stainless Steel | Stainless Steel | 0000000 | 000000 |
D | 5/16" | 1,250 | 1 1/4" | 2 1/32" | 1 1/4" | 4 1/2" | 9/16" | 1/4" | Stainless Steel | Stainless Steel | 0000000 | 00000 |
D | 7/16" | 1,850 | 2" | 2 29/64" | 2" | 5 1/2" | 3/4" | 5/16" | Stainless Steel | Stainless Steel | 0000000 | 00000 |
Hanging Pulleys for Rope—For Horizontal Pulling






Hang these pulleys from hooks, screws, and bolts to assist with horizontal pulling or to guide a rope.
Pulleys with two grooves are for use where multiple pulleys move a single load, such as block and tackle systems. They require about half the force of a single-groove pulley to move the same load.
Acetal, nylon, and aluminum are lightweight and corrosion resistant. Stainless steel is the most corrosion resistant.
Styles C, H, and P have a bracket on the bottom for tying off one end of a rope.
Pulley for 3/8" dia. rope can be set to ratchet even when not under load.
For technical drawings and 3-D models, click on a part number.
Style | For Rope Dia. | Capacity, lbs. | OD | Wd. | Overall Lg. | Overall Ht. | Eye Dia. | Eye Thick. | Hook Opening Wd. | Hook Thick. | Material | Housing Material | Each | |
Double-Groove Without Bearing | ||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Rigid Eye | ||||||||||||||
N | 3/8" | Not Rated | 1 1/2" | 1 5/8" | 1 1/2" | 3 1/2" | 1/2" | 5/16" | __ | __ | Steel | Steel | 0000000 | 000000 |
N | 1/2" | Not Rated | 2" | 1 7/8" | 2" | 4 9/16" | 13/16" | 7/16" | __ | __ | Steel | Steel | 0000000 | 00000 |
Rigid Latching Hook | ||||||||||||||
Q | 1/2" | 1,400 | 2 1/4" | 2" | 2 1/4" | 11 1/2" | __ | __ | 1 1/16" | 3/4" | Steel | Steel | 0000000 | 000000 |
Q | 5/8" | 1,800 | 3" | 3" | 3" | 12 7/8" | __ | __ | 1 1/16" | 3/4" | Steel | Steel | 0000000 | 000000 |
Q | 3/4" | 2,500 | 3 1/2" | 3" | 3 1/2" | 14" | __ | __ | 1 1/16" | 15/16" | Steel | Steel | 0000000 | 000000 |
Swivel Eye | ||||||||||||||
M | 3/16" | Not Rated | 7/8" | 1 1/4" | 7/8" | 2 1/2" | 9/16" | 3/16" | __ | __ | Iron | Iron | 0000000 | 0000 |
M | 5/16" | Not Rated | 1 5/16" | 1 5/8" | 1 5/16" | 3 5/8" | 3/4" | 1/4" | __ | __ | Iron | Iron | 0000000 | 00000 |
M | 3/8" | Not Rated | 1 13/16" | 1 13/16" | 1 13/16" | 4 1/4" | 3/4" | 1/4" | __ | __ | Iron | Iron | 0000000 | 00000 |
R | 1/4" | 400 | 1 1/4" | 1 1/2" | 1 1/4" | 3 1/4" | 9/16" | 1/4" | __ | __ | Stainless Steel | Stainless Steel | 0000000 | 00000 |
R | 5/16" | 600 | 1 3/4" | 1 3/4" | 1 3/4" | 3 7/8" | 5/8" | 5/16" | __ | __ | Stainless Steel | Stainless Steel | 0000000 | 00000 |
R | 3/8" | 1,000 | 2 1/4" | 2" | 2 1/4" | 5" | 13/16" | 5/16" | __ | __ | Stainless Steel | Stainless Steel | 0000000 | 00000 |
Swivel Latching Hook | ||||||||||||||
P | 1/2" | 1,000 | 2" | 2 3/8" | 2" | 11 1/4" | __ | __ | 7/8" | 9/16" | Nylon Plastic | Nylon Plastic | 000000 | 000000 |
Mounted Pulleys for Wire Rope—For Lifting



Mount these pulleys to a flat surface.
Pulleys with two grooves are for use in applications where multiple pulleys move a single load, such as block and tackle systems. They can reduce the force needed to move the load by up to two times compared to single-groove pulleys.
Warning: Never use to lift people or items over people.
For technical drawings and 3-D models, click on a part number.
Mounting Hole | ||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Style | For Rope Dia. | Capacity, lbs. | OD | Wd. | Overall Lg. | Overall Ht. | Material | No. of | Dia. | Ctr.-to-Ctr. (A) | Ctr.-to-Ctr. (B) | Specifications Met | Each | |
Double-Groove Without Bearing | ||||||||||||||
4 | 3/16" | 600 | 2" | 1 7/32" | 2" | 2 3/8" | Steel | 4 | 3/16" | 2" | 11/16" | ASME B30.26 | 0000000 | 000000 |
4 | 1/4" | 800 | 3" | 1 7/32" | 3" | 3 9/16" | Steel | 4 | 3/16" | 2" | 11/16" | ASME B30.26 | 0000000 | 00000 |
Hanging Pulleys for Wire Rope—For Lifting


Hang these pulleys from hooks, screws, and bolts.
Pulleys with two grooves are for use where multiple pulleys move a single load, such as block and tackle systems. They require about half the force of a single-groove pulley to move the same load.
Warning: Never use to lift people or items over people.
For technical drawings and 3-D models, click on a part number.
Style | For Rope Dia. | Capacity, lbs. | OD | Wd. | Overall Lg. | Overall Ht. | Eye Dia. | Eye Thick. | Material | Specifications Met | Each | |
Double-Groove Without Bearing | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
Swivel Eye | ||||||||||||
F | 3/16" | 525 | 1 1/2" | 1 7/32" | 1 1/2" | 3 13/16" | 5/8" | 5/16" | Steel | ASME B30.26 | 0000000 | 000000 |
F | 1/4" | 800 | 3" | 1 7/32" | 3" | 5 5/8" | 7/8" | 5/16" | Steel | ASME B30.26 | 0000000 | 00000 |
F | 5/16" | 1,550 | 3 1/2" | 1 13/16" | 3 1/2" | 7 5/8" | 1 3/16" | 7/16" | Steel | ASME B30.26 | 0000000 | 00000 |
Easy-Open Hanging Pulleys for Wire Rope—For Lifting


Also known as snatch blocks, these pulleys open so it's easier to feed the rope through the housing—a free rope end is not needed.
Pulleys with two grooves are for use where multiple pulleys move a single load, such as block and tackle systems. They require about half the force of a single-groove pulley to move the same load.
Warning: Never use to lift people or items over people.
For technical drawings and 3-D models, click on a part number.
Hanging Pulleys for Rope—For Lifting


Hang these pulleys from hooks, screws, and bolts.
Pulleys with two grooves are used in applications where multiple pulleys move a single load, such as block and tackle systems. They can reduce the force needed to move the load by up to two times compared to single-groove pulleys.
Warning: Never use to lift people or items over people.
For technical drawings and 3-D models, click on a part number.
Style | For Rope Dia. | Capacity, lbs. | OD | Wd. | Overall Lg. | Overall Ht. | Hook Opening Wd. | Hook Thick. | Material | Specifications Met | Each | |
Double-Groove Without Bearing | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
Swivel Latching Hook | ||||||||||||
C | 1/2" | 3,000 | 2 1/4" | 2" | 2 1/4" | 12 5/16" | 1" | 3/4" | Steel | ASME B30.26 | 000000 | 0000000 |