Roller Chain Trade Size Roller Chain Trade Size |
|---|
|
|
|
Working Load Working Load |
|---|
|
Material Material |
|---|
|
Length Length |
|---|
|
|
|
Roller Diameter Roller Diameter |
|---|
|
|
Link Type Link Type |
|---|
|
About Roller Chain and Sprockets
More
ANSI Roller Chain and Links
Connecting links are also known as master links. They're used to join the ends of a chain length. The side plate is easy to remove for attaching to a chain. Adding links are also known as roller links. They require two connecting links to join chain. Adding-and-connecting links are also known as half links and offset links. A combination of connecting and adding links, they join chain that requires an odd number of links. For trade size 35 and up, the side plate is easy to remove for attaching them to chain.
For technical drawings and 3-D models, click on a part number.
| Roller Chain Trade No. | Pitch | Roller Dia. | Roller Wd. | Working Load, lbs. | Lengths, ft. | Per Ft. | |
Steel | |||||||
|---|---|---|---|---|---|---|---|
| 35-2 | 3/8" | 0.200" | 3/16" | 810 | 1-20, 50, 100 | 00000000 | 00000 |
| 40-2 | 1/2" | 0.312" | 5/16" | 1,350 | 1-20, 50, 100 | 00000000 | 00000 |
| 50-2 | 5/8" | 0.400" | 3/8" | 2,350 | 1-20, 50, 100 | 00000000 | 00000 |
| 60-2 | 3/4" | 0.469" | 1/2" | 3,300 | 1-20, 50, 100 | 00000000 | 00000 |
| 80-2 | 1" | 0.625" | 5/8" | 5,600 | 1-20, 50 | 00000000 | 00000 |
| 100-2 | 1 1/4" | 0.750" | 3/4" | 8,600 | 1-20, 50 | 0000000 | 00000 |
| 120-2 | 1 1/2" | 0.875" | 1" | 11,500 | 1-20, 50 | 0000000 | 00000 |
| 140-2 | 1 3/4" | 1.000" | 1" | 15,300 | 1-20 | 0000000 | 00000 |
| 160-2 | 2" | 1.125" | 1 1/4" | 20,200 | 1-20 | 0000000 | 000000 |
| Roller Chain Trade No. | Pitch | Roller Dia. | Roller Wd. | Working Load, lbs. | Each | |
Steel | ||||||
|---|---|---|---|---|---|---|
| 35-2 | 3/8" | 0.200" | 3/16" | 810 | 00000000 | 00000 |
| 40-2 | 1/2" | 0.312" | 5/16" | 1,350 | 00000000 | 0000 |
| 50-2 | 5/8" | 0.400" | 3/8" | 2,350 | 00000000 | 0000 |
| 60-2 | 3/4" | 0.469" | 1/2" | 3,300 | 00000000 | 0000 |
| 80-2 | 1" | 0.625" | 5/8" | 5,600 | 00000000 | 0000 |
| 100-2 | 1 1/4" | 0.750" | 3/4" | 8,600 | 00000000 | 0000 |
| 120-2 | 1 1/2" | 0.875" | 1" | 11,500 | 00000000 | 00000 |
| 140-2 | 1 3/4" | 1.000" | 1" | 15,300 | 00000000 | 00000 |
| 160-2 | 2" | 1.125" | 1 1/4" | 20,200 | 00000000 | 00000 |
| Roller Chain Trade No. | Pitch | Roller Dia. | Roller Wd. | Working Load, lbs. | Each | |
Steel | ||||||
|---|---|---|---|---|---|---|
| 35-2 | 3/8" | 0.200" | 3/16" | 810 | 00000000 | 00000 |
| 40-2 | 1/2" | 0.312" | 5/16" | 1,350 | 00000000 | 0000 |
| 50-2 | 5/8" | 0.400" | 3/8" | 2,350 | 00000000 | 0000 |
| 60-2 | 3/4" | 0.469" | 1/2" | 3,300 | 00000000 | 0000 |
| 80-2 | 1" | 0.625" | 5/8" | 5,600 | 00000000 | 0000 |
| 100-2 | 1 1/4" | 0.750" | 3/4" | 8,600 | 00000000 | 0000 |
| Roller Chain Trade No. | Pitch | Roller Dia. | Roller Wd. | Working Load, lbs. | Each | |
Steel | ||||||
|---|---|---|---|---|---|---|
| 35-2 | 3/8" | 0.200" | 3/16" | 810 | 00000000 | 00000 |
| 40-2 | 1/2" | 0.312" | 5/16" | 1,350 | 00000000 | 0000 |
| 50-2 | 5/8" | 0.400" | 3/8" | 2,350 | 00000000 | 0000 |
| 60-2 | 3/4" | 0.469" | 1/2" | 3,300 | 00000000 | 0000 |
| 80-2 | 1" | 0.625" | 5/8" | 5,600 | 00000000 | 00000 |
| 100-2 | 1 1/4" | 0.750" | 3/4" | 8,600 | 00000000 | 00000 |
| 120-2 | 1 1/2" | 0.875" | 1" | 11,500 | 0000000 | 00000 |
| 140-2 | 1 3/4" | 1.000" | 1" | 15,300 | 00000000 | 00000 |
| 160-2 | 2" | 1.125" | 1 1/4" | 20,200 | 0000000 | 00000 |
Heavy Duty ANSI Roller Chain and Links
Thick side plates allow this chain to handle double the working load of standard chain.
Connecting links are also known as master links. They're used to join the ends of a chain length. The side plate is easy to remove for attaching to a chain. Adding-and-connecting links are also known as half links and offset links. A combination of connecting and adding links, they can join chain that requires an odd number of links. The side plate is easy to remove for attaching to chain.
For technical drawings and 3-D models, click on a part number.
| Roller Chain Trade No. | Pitch | Roller Dia. | Roller Wd. | Working Load, lbs. | Lengths, ft. | Per Ft. | |
Steel | |||||||
|---|---|---|---|---|---|---|---|
| 50H-2 | 5/8" | 0.400" | 3/8" | 2,400 | 1-20, 50, 100 | 000000 | 000000 |
| 60H-2 | 3/4" | 0.469" | 1/2" | 3,400 | 1-20, 50, 100 | 000000 | 00000 |
| 80H-2 | 1" | 0.625" | 5/8" | 5,800 | 1-20, 50 | 000000 | 00000 |
Corrosion-Resistant ANSI Roller Chain and Links
This 304 stainless steel roller chain is more corrosion resistant than treated steel roller chain.
Connecting links are also known as master links. They're used to join the ends of a chain length. The side plate is easy to remove for attaching to a chain. Adding-and-connecting links are also known as half links and offset links. A combination of connecting and adding links, they can join chain that requires an odd number of links. For trade size 35 and up, the side plate is easy to remove for attaching them to chain.
For technical drawings and 3-D models, click on a part number.
| Roller Chain Trade No. | Pitch | Roller Dia. | Roller Wd. | Working Load, lbs. | Lengths, ft. | Per Ft. | |
304 Stainless Steel | |||||||
|---|---|---|---|---|---|---|---|
| 40-2SS | 1/2" | 0.312" | 5/16" | 190 | 1-20 | 000000 | 000000 |
| 50-2SS | 5/8" | 0.400" | 3/8" | 300 | 1-20 | 000000 | 00000 |
| 60-2SS | 3/4" | 0.469" | 1/2" | 460 | 1-20 | 000000 | 00000 |
High-Strength Corrosion-Resistant
ANSI Roller Chain and Links
Treated steel chain has over eight times the capacity of stainless steel chain.
Connecting links are also known as master links. They're used to join the ends of a chain length. The side plate is easy to remove for attaching to a chain. Adding-and-connecting links are also known as half links and offset links. A combination of connecting and adding links, they can join chain that requires an odd number of links. The side plate is easy to remove for attaching to chain.
For technical drawings and 3-D models, click on a part number.
| Roller Chain Trade No. | Pitch | Roller Dia. | Roller Wd. | Working Load, lbs. | Lengths, ft. | Per Ft. | |
Treated Steel | |||||||
|---|---|---|---|---|---|---|---|
| 40-2 | 1/2" | 0.312" | 5/16" | 1,350 | 1-20, 50, 100 | 000000 | 000000 |
| 50-2 | 5/8" | 0.400" | 3/8" | 2,350 | 1-20, 50, 100 | 000000 | 00000 |
| 60-2 | 3/4" | 0.469" | 1/2" | 3,300 | 1-20, 50, 100 | 000000 | 00000 |
| 80-2 | 1" | 0.625" | 5/8" | 5,600 | 1-20, 50, 100 | 000000 | 00000 |
Metric Roller Chain and Links
This chain conforms to ISO 606B and is compatible with BS 228 (British standard) and DIN 8187 (German standard).
Connecting links are also known as master links. They're used to join the ends of a chain length. The side plate is easy to remove for attaching to a chain. Adding-and-connecting links are also known as half links and offset links. They can join chain that requires an odd number of links. For trade size 06B and up, the side plate is easy to remove for attaching them to chain.
For technical drawings and 3-D models, click on a part number.
Pitch | ||||||||
|---|---|---|---|---|---|---|---|---|
| Roller Chain Trade No. | mm | in. | Roller Dia., mm | Roller Wd., mm | Working Load, lbs. | Lengths, ft. | Per Ft. | |
Steel | ||||||||
| 06B-2 | 9.53 | 0.375" | 6.35 | 5.72 | 650 | 1-20, 50, 100 | 0000000 | 000000 |
| 08B-2 | 12.70 | 0.500" | 8.51 | 7.75 | 1,200 | 1-20, 50, 100 | 0000000 | 00000 |
| 10B-2 | 15.88 | 0.625" | 10.16 | 9.65 | 1,800 | 1-20, 50, 100 | 0000000 | 00000 |
| 12B-2 | 19.05 | 0.750" | 12.07 | 11.68 | 2,600 | 1-20, 50, 100 | 0000000 | 00000 |
High-Strength Corrosion-Resistant
Metric Roller Chain and Links
Treated steel chain has over seven times the capacity of stainless steel chain. It conforms to ISO 606B and is compatible with BS 228 (British standard) and DIN 8187 (German standard).
Connecting links are also known as master links. They're used to join the ends of a chain length. The side plate is easy to remove for attaching to a chain. Adding-and-connecting links are also known as half links and offset links. They can join chain that requires an odd number of links. The side plate is easy to remove for attaching to chain.
For technical drawings and 3-D models, click on a part number.
Pitch | ||||||||
|---|---|---|---|---|---|---|---|---|
| Roller Chain Trade No. | mm | in. | Roller Dia., mm | Roller Wd., mm | Working Load, lbs. | Length, ft. | Per Ft. | |
Treated Steel | ||||||||
| 08B-2 | 12.70 | 0.500" | 8.51 | 7.75 | 1,200 | 1-20, 50, 100 | 000000 | 000000 |
| 10B-2 | 15.88 | 0.625" | 10.16 | 9.65 | 1,800 | 1-20, 50, 100 | 000000 | 00000 |
| 12B-2 | 19.05 | 0.750" | 12.07 | 11.68 | 2,600 | 1-20, 50, 100 | 000000 | 00000 |
| 16B-2 | 25.40 | 1.000" | 15.88 | 17.02 | 4,800 | 1-20, 50, 100 | 000000 | 00000 |