Search Results
For Use On For Use On |
|---|
|
Abrasive Material Abrasive Material |
|---|
|
Grit Grit |
|---|
|
Tooth Style Tooth Style |
|---|
|
Surface Texture Surface Texture |
|---|
|
Abrasive Bond Material Abrasive Bond Material |
|---|
|
Maximum Speed Maximum Speed |
|---|
|
Overall Length Overall Length |
|---|
|
About Finishing
More
Miniature Bit and Disc Sets
Set contains an assortment of tools for grinding, sanding, and cutting on small surface areas.
It includes aluminum oxide bits for grinding hard metals and silicon carbide bits for grinding soft metals.
Caution: As bit shank is exposed beyond 1/2", maximum safe rpm decreases significantly. Refer to ANSI standard B7.1.
| No. of Pieces | Includes | Max. Speed, rpm | Abrasive Material | Color | Each | |
For Steel, Aluminum, Brass, Bronze | ||||||
|---|---|---|---|---|---|---|
1/8" Shank Dia. | ||||||
| 134 | 64 Cutoff Discs, 16 Aluminum Oxide Sanding Bands, One Rubber Drum for Sanding Bands, 36 Sanding Discs, One Mandrel for Cutoff and Sanding Discs, Six Aluminum Oxide Grinding Bits, Four Silicon Carbide Grinding Bits, Six Aluminum Oxide Grinding Discs, Plastic Case | 30,000 | Aluminum Oxide/Silicon Carbide Blend | Brown, Gray | 0000000 | 000000 |
Grinding Bit Sets for Metals
Each set contains a selection of grinding bits.
Bits are aluminum oxide, which is the most common abrasive used for grinding metal. They are also known as mounted points and die grinder bits.
Abrasive | |||||||
|---|---|---|---|---|---|---|---|
| No. of Pieces | Includes | Material | Bond Material | Shank Lg. | Grit (Surface Texture) | Each | |
For Steel, Iron | |||||||
1/8" Shank Dia. | |||||||
| 12 | Foam Block Stand, Two each: B42, B44, B46, B52, B53, B103 | Aluminum Oxide | Vitrified Clay | 1 1/2" | 60 (Rough) Orange | 0000000 | 000000 |
| 50 | Foam Block Stand, Two each: B97, Six Each: B44, W144, W145, W154, W163, W170, W176, W185 | Aluminum Oxide | Vitrified Clay | 1 1/2" | 60 (Rough) Red | 0000000 | 00000 |
| 144 | Foam Block Stand, Nine each: B44, B52, B97, B121, W142, W144, W145, W153, W154, W162, W163, W170, W175, W176, W185, W200 | Aluminum Oxide | Vitrified Clay | 1 1/2" | 60 (Rough) Red | 0000000 | 000000 |
1/8" and 1/4" Shank Dia. | |||||||
| 100 | Five each: A1, A3, A4, A11, A12, A24, A38, W164, W185, W220, with 1/4" Shank, Five each: B42, B44, B52, B53, B111, B131, W144, W154, W163, W185, with 1/8" shank, Foam Block Stand | Aluminum Oxide | Vitrified Clay | 1 1/2" | 60 (Rough) Orange | 0000000 | 000000 |
1/4" Shank Dia. | |||||||
| 18 | Foam Block Stand, Three each: A3, A5, A11, A12, W207, W220 | Aluminum Oxide | Vitrified Clay | 1 1/2" | 60 (Rough) Blue | 0000000 | 00000 |
| 50 | Five each: A2, A5, A12, A37, A38, W185, W186, W187, W205, W219, Foam Block Stand | Aluminum Oxide | Vitrified Clay | 1 1/2" | 60 (Rough) Red | 0000000 | 00000 |
Rubber-Cushioned Abrasive Grinding Bit Sets for Metals
The bits in this set have rubber blended into the abrasive, which cushions during grinding to produce a smooth to extra-smooth surface texture.
Set includes aluminum oxide bits for grinding hard metals and silicon carbide bits for grinding soft metals.
Caution: As bit shank is exposed beyond 1/2", maximum safe rpm decreases significantly. Refer to ANSI standard B7.1.
Abrasive | |||||||
|---|---|---|---|---|---|---|---|
| No. of Pieces | Includes | Max. Speed, rpm | Material | Bond Material | Grit (Surface Texture) | Each | |
For Steel, Aluminum, Brass, Bronze | |||||||
| 126 | 30 Silicon Carbide and 10 Aluminum Oxide 15/16" Lg. x 1/4" Dia. Bits, 30 Silicon Carbide and 10 Aluminum Oxide 7/8" Dia. Tapered-Edge Discs, 30 Silicon Carbide and 10 Aluminum Oxide 7/8" Dia. x 1/8" Thick Straight Discs, Two Spiral Mandrels with Hex Nut, Four 1/8" Dia. Mandrels, Paper and Plastic Case | 21,000 | Aluminum Oxide/Silicon Carbide Blend | Rubber | 120 (Smooth) to 240 (Extra Smooth) | 0000000 | 000000 |
Bur Sets
9-Piece Carbide Sets with 1/8" Shank Dia.
 |  SA-51 |  SB-51 |  SC-51 |  SD-51 |  SE-51 |
 SF-51 |  SG-51 |  SM-51 |  SN-51 |
| Includes | O'all Lg. | For Use On | Container Type | Each | |
Double Cut (For Medium Finish) | |||||
|---|---|---|---|---|---|
| Cylinder-Shape Flat-Tip SA-51 Bur—1/4" Head Dia. × 1/2" Head Lg. Cylinder-Shape Flat Cutter-Tip SB-51 Bur—1/4" Head Dia. × 3/16" Head Lg. Cylinder-Shape Rounded-Tip SC-51 Bur—1/4" Head Dia. × 1/2" Head Lg. Tree-Shape Pointed-Tip SG-51 Bur—1/4" Head Dia. × 1/2" Head Lg. Tree-Shape Rounded-Tip SF-51 Bur—1/4" Head Dia. × 1/2" Head Lg. Ball-Shape SD-51 Bur—1/4" Head Dia. × 7/32" Head Lg. Oval/Egg-Shape SE-51 Bur—1/4" Head Dia. × 3/8" Head Lg. 10° Inverted Cone-Shape SN-51 Bur—1/4" Head Dia. × 1/4" Head Lg. 22° Tapered Cone-Shape Pointed-Tip SM-51 Bur—1/4" Head Dia. × 1/2" Head Lg. | 1 11/16"-2" | Steel, Hardened Steel, Tool Steel, Stainless Steel, Titanium, Iron, Nickel | Wood Box | 0000000 | 000000 |
Single Cut (For Fine Finish) | |||||
| Cylinder-Shape Flat-Tip SA-51 Bur—1/4" Head Dia. × 1/2" Head Lg. Cylinder-Shape Flat Cutter-Tip SB-51 Bur—1/4" Head Dia. × 3/16" Head Lg. Cylinder-Shape Rounded-Tip SC-51 Bur—1/4" Head Dia. × 1/2" Head Lg. Tree-Shape Pointed-Tip SG-51 Bur—1/4" Head Dia. × 1/2" Head Lg. Tree-Shape Rounded-Tip SF-51 Bur—1/4" Head Dia. × 1/2" Head Lg. Ball-Shape SD-51 Bur—1/4" Head Dia. × 7/32" Head Lg. Oval/Egg-Shape SE-51 Bur—1/4" Head Dia. × 3/8" Head Lg. 10° Inverted Cone-Shape SN-51 Bur—1/4" Head Dia. × 1/4" Head Lg. 22° Tapered Cone-Shape Pointed-Tip SM-51 Bur—1/4" Head Dia. × 1/2" Head Lg. | 1 11/16"-2" | Steel, Hardened Steel, Tool Steel, Stainless Steel, Titanium, Iron, Nickel | Wood Box | 0000000 | 00000 |
12-Piece Carbide Sets with 1/8" Shank Dia.
SA-42
SA-43
SC-42
SD-42
SE-41
SF-41
SF-42
SG-41
SL-41
SM-43
SN-42
| Includes | O'all Lg. | For Use On | Container Type | Each | |
Double Cut (For Medium Finish) | |||||
|---|---|---|---|---|---|
| Cylinder-Shape Flat-Tip SA-42 Bur—3/32" Head Dia. × 7/16" Head Lg. Cylinder-Shape Flat-Tip SA-43 Bur—1/8" Head Dia. × 9/16" Head Lg. Cylinder-Shape Rounded-Tip SC-42 Bur—1/8" Head Dia. × 9/16" Head Lg. Tree-Shape Pointed-Tip SG-41 Bur—1/8" Head Dia. × 1/4" Head Lg. Tree-Shape Rounded-Tip SF-41 Bur—1/8" Head Dia. × 1/4" Head Lg. Tree-Shape Rounded-Tip SF-42 Bur—1/8" Head Dia. × 1/2" Head Lg. Ball-Shape SD-42 Bur—1/8" Head Dia. × 1/8" Head Lg. Flame-Shape SH-41 Bur—1/8" Head Dia. × 1/4" Head Lg. Oval/Egg-Shape SE-41 Bur—1/8" Head Dia. × 7/32" Head Lg. 10° Inverted Cone-Shape SN-42 Bur—1/8" Head Dia. × 3/16" Head Lg. 7° Tapered Cone-Shape Pointed-Tip SM-43 Bur—1/8" Head Dia. × 5/8" Head Lg. 8° Tapered Cone-Shape Rounded-Tip SL-41 Bur—1/8" Head Dia. × 3/8" Head Lg. | 1 1/2" | Steel, Hardened Steel, Tool Steel, Stainless Steel, Titanium, Iron, Nickel | Wood Box | 0000000 | 000000 |
Single Cut (For Fine Finish) | |||||
| Cylinder-Shape Flat-Tip SA-42 Bur—3/32" Head Dia. × 7/16" Head Lg. Cylinder-Shape Flat-Tip SA-43 Bur—1/8" Head Dia. × 9/16" Head Lg. Cylinder-Shape Rounded-Tip SC-42 Bur—1/8" Head Dia. × 9/16" Head Lg. Tree-Shape Pointed-Tip SG-41 Bur—1/8" Head Dia. × 1/4" Head Lg. Tree-Shape Rounded-Tip SF-41 Bur—1/8" Head Dia. × 1/4" Head Lg. Tree-Shape Rounded-Tip SF-42 Bur—1/8" Head Dia. × 1/2" Head Lg. Ball-Shape SD-42 Bur—1/8" Head Dia. × 1/8" Head Lg. Flame-Shape SH-41 Bur—1/8" Head Dia. × 1/4" Head Lg. Oval/Egg-Shape SE-41 Bur—1/8" Head Dia. × 7/32" Head Lg. 10° Inverted Cone-Shape SN-42 Bur—1/8" Head Dia. × 3/16" Head Lg. 7° Tapered Cone-Shape Pointed-Tip SM-43 Bur—1/8" Head Dia. × 5/8" Head Lg. 8° Tapered Cone-Shape Rounded-Tip SL-41 Bur—1/8" Head Dia. × 3/8" Head Lg. | 1 1/2" | Steel, Hardened Steel, Tool Steel, Stainless Steel, Titanium, Iron, Nickel | Wood Box | 0000000 | 00000 |
Buffing Wheel, Bob, and Compound Kits
Most buffing processes have two steps:
Cutting, the first step, removes scratches and surface imperfections.
Coloring, the second step, produces an even finish.
Cutting/coloring compounds perform both steps at once.
| No. of Pieces | Includes | Each | |
| 20 | Three Medium Polishing Bobs (Flat-Tip Cylinder, Ball, and Oval)—1/2" Head Dia. × 1/2" Head Lg. × 1/8" Shank Dia. Two Medium Polishing Bobs (Pear and Flat-Tip Cone)—1/2" Head Dia. × 3/4" Head Lg. × 1/8" Shank Dia. Two Medium Polishing Bobs (Rounded-Tip Cylinder and Rounded-Tip Cone)—1/2" Head Dia. × 1" Head Lg. × 1/8" Shank Dia. Eight Buffing Wheels (Four Flat-Edge and Four Tapered-Edge)—3/4" Dia. × 1/8" Thick. One 1/8" Dia. Shank for Buffing Wheels One 1/2 oz. Extra-Smooth-Finish Brown Coloring Compound One 1/2 oz. Polished-Finish Red Rouge Cutting/Coloring Compound One 1/2 oz. Polished-Finish White Rouge Cutting/Coloring Compound One 1/2 oz. Polished-Finish Black Cutting/Coloring Compound | 0000000 | 000000 |