6.8 mm Drill Bits | McMaster-Carr

Extended Length—Drill through panels and thick workpieces with our longest bits. Their length is good for creating deep holes but makes them less rigid than other bits. As a result, they are more prone to wobbling or breaking, especially when drilling hard materials.

Black Oxide—The dark finish increases wear resistance and reduces friction to improve chip flow, so these bits can last 50% longer than uncoated bits.

Titanium Nitride (TiN) Coated—Drill at higher speeds and last longer than uncoated and oxide-coated bits, especially on tough materials like hardened steel and nickel.

Uncoated—The most economical option, uncoated bits perform best when used on low-carbon steel and aluminum. Polished to reduce friction, they're also known as bright finish bits.

Black/Gold Oxide—Like black oxide, this finish adds wear resistance and reduces friction for improved chip flow. Because it’s less prone to flaking off, it offers better rust protection when bits aren't in use.

					Shank				Each		Package
	Drill Bit Size, mm	Decimal Size Equiv.	Overall Lg., mm	Max. Drilling Dp., mm	Type	Size	Drill Bit Point Type	Mfr.		Each	Pkg. Qty.		Pkg.
Jobbers' Length







				Black Oxide

				6.8	0.2677"	109	55.4	Round	6.8 mm	Standard	Dormer Pramet	2958A114	00000	—	———	0




						Titanium Nitride (TiN) Coated

						6.8	0.2677"	109	55.4	Round	6.8 mm	Standard	Dormer Pramet	8950A59	0000	—	———	0




								Black/Gold Oxide

								6.8	0.2677"	105	69.9	Round	6.8 mm	Split	Viking Norseman Drill	30565A292	0000	10	30565A44	000000


								Short Length







												Black Oxide

												6.8	0.2677"	74	20.4	Round	6.8 mm	Split	Dormer Pramet	28255A47	0000	—	———	0




														Titanium Nitride (TiN) Coated

														6.8	0.2677"	74	17	Round	6.8 mm	Split	Dormer Pramet	2979N59	0000	—	———	0


														Extended Length







																		Black Oxide

																		6.8	0.2677"	156	102	Round	6.8 mm	Standard	Dormer Pramet	88455A123	00000	—	———	0




																				Uncoated

																				6.8	0.2677"	156	88.7	Round	6.8 mm	Standard	Dormer Pramet	3083A171	00000	—	———	0

Cobalt Steel Drill Bits


Jobbers' Length Round Shank	Split

Tough and wear resistant, cobalt steel bits last at least twice as long as high-speed steel. They can also run up to 25% faster at higher temperatures without being damaged on hard materials, such as nickel.

Jobbers' Length—These bits have the balance of rigidity and length needed for most applications.

Titanium Nitride (TiN) Coated—Drill at higher speeds and last longer than uncoated and oxide-coated bits, especially on tough materials like hardened steel and nickel.

Titanium Aluminum Nitride (TiAlN) Coated—The hardest and most wear-resistant coating, especially at high temperatures. These bits are best for hard and abrasive materials, such as iron, titanium, and fiberglass.

Gold Oxide—Like black oxide, this finish adds wear resistance and reduces friction for improved chip flow. Because it’s less prone to flaking off, it offers better rust protection when bits aren't in use.

					Shank
	Drill Bit Size, mm	Decimal Size Equiv.	Overall Lg., mm	Max. Drilling Dp., mm	Type	Size	Drill Bit Point Type	Mfr.		Each
Jobbers' Length







				Titanium Nitride (TiN) Coated

				6.8	0.2677"	109	69	Round	6.8 mm	Split	Chicago-Latrobe	5058N36	000000




						Titanium Aluminum Nitride (TiAlN) Coated

						6.8	0.2677"	109	69	Round	6.8 mm	Split	Chicago-Latrobe	2753A239	00000




								Gold Oxide

								6.8	0.2677"	109	55.4	Round	6.8 mm	Split	Dormer Pramet	29355A115	0000

Drill Bit Guides

Place these guides on your workpiece to drill precise holes without building a fixture. They'll even work on corners and round surfaces. Lines marked on the side allow you to align your holes accurately. Made of hardened steel, they’re tough enough to withstand frequent use.

For Drill Bit Size, mm	For Drill Bit Size Decimal Equiv.	Lg.	Wd.	Ht.	Material		Each
3, 3.3, 3.5, 4, 4.2, 4.5, 5, 5.5, 6, 6.5, 6.8, 7, 7.5, 8, 8.5, 9, 9.5	0.1181", 0.1299", 0.1378", 0.1575", 0.1654", 0.1772", 0.1968", 0.2165", 0.2362", 0.2559", 0.2677", 0.2756", 0.2953", 0.315", 0.3346", 0.3543", 0.374"	5 1/2"	3/4"	7/8"	Steel	9550T15	000000

Chip-Clearing Cobalt Steel Drill Bits


Jobbers' Length Parabolic Flute Round Shank	Split

Avoid clogs and dissipate heat with cobalt bits that last at least twice as long as high-speed steel. The flutes clear chips to improve coolant flow and prevent damage to the bit and the hole. They also speed up drilling since you don't have to stop to clear the bit manually.

Jobbers' Length—These bits have the balance of rigidity and length needed for most applications.

Uncoated—Polished to eject chips, these are also known as bright finish bits.

						Shank
	Drill Bit Size, mm	Decimal Size Equiv.	Overall Lg., mm	Max. Drilling Dp., mm	Flute Type	Type	Size, mm	Drill Bit Point Type	Mfr.		Each
Jobbers' Length







				Uncoated

				6.8	0.2677"	109	67	Parabolic	Round	6.8	Split	Viking Norseman Drill	2771N768	000000

Chip-Clearing High-Speed Steel Drill Bits


Jobbers' Length Parabolic Flute Round Shank	Split

With flutes that lift chips out of the hole, you don't have to stop drilling to clear these bits manually. They improve coolant flow to dissipate heat and prevent clogs that can damage the bit and ruin the hole. High-speed steel is good for general purpose drilling in most metals.

Parabolic Flute—A U-shaped groove on the flutes cuts faster and clears chips more quickly than high-helix bits, so these are better for drilling deeper holes.

Jobbers' Length—These bits have the balance of rigidity and length needed for most applications.

Titanium Nitride (TiN) Coated—Drill at higher speeds and last longer than uncoated and oxide-coated bits, especially on tough materials like hardened steel and nickel.

Uncoated—The most economical option, uncoated bits perform best when used on low-carbon steel and aluminum. Polished to reduce friction, they're also known as bright finish bits.

						Shank
	Drill Bit Size, mm	Decimal Size Equiv.	Overall Lg., mm	Max. Drilling Dp., mm	Flute Type	Type	Size, mm	Drill Bit Point Type	Mfr.		Each
Jobbers' Length







				Titanium Nitride (TiN) Coated

				6.8	0.2677"	109	69	Parabolic	Round	6.8	Split	Dormer Pramet	7333N29	000000




						Uncoated

						6.8	0.2677"	109	55.4	Parabolic	Round	6.8	Split	Dormer Pramet	2754A33	0000

Undersized Hardened Multipurpose M2 High-Speed Tool Steel Rods

These rods, also known as drill blanks, have an undersized diameter for machining your own drill bits. They're hardened for increased abrasion and impact resistance. M2 tool steel offers a nice balance of wear resistance and machinability. It has a high molybdenum content, which allows it to maintain sharp cutting edges even at elevated temperatures.

Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.

Dia., mm	Dia. Tolerance, mm	Drill Bit Size, mm	Lg.	Yield Strength	Hardness	Mechanical Finish		Each
6.8	-0.005 to 0	6.8	4 1/8"	Not Rated	Rockwell C60 (Extra Hard)	Precision Ground	2900A345	00000

Impact Wrench Chip-Clearing Taps

Cut the cleanest, quickest threads without ever stopping for chips. Made with an oversized shank and hardened high-speed steel, these taps are built to handle the high torque of impact wrenches for smooth, continuous cutting. The rapid hammering breaks up chips and spiral flutes pull them out of the hole, so you never have to pause and reverse to clear them. They can thread both blind and through holes 15 times faster than by hand. They’re a good choice for threading large holes and working with hard metals.

You’ll need a VersaDrive chuck (sold separately) to install these taps into your impact wrench.

Titanium Nitride (TiN) Coated—Run at higher speeds and last twice as long as uncoated taps.

Spiral Flute for Blind Holes—Pull chips back toward the tap so they won't build up in blind holes. When tapping brittle material like iron that creates fine or powdery debris, choose a straight-flute tap.

Plug Chamfer—Our go-to chamfer type. With a longer taper than a bottoming chamfer, they are easier to turn but won't thread as close the bottom of a hole.

					Drill Bit		Shank			Spiral Flute for Blind Holes
	Thread Size	Thread Lg.	Overall Lg.	Thread Type	Size, mm	Decimal Size Equiv.	Type	Size	Mfr.	Chamfer Type	No. of Flutes		Each
Hardened High-Speed Steel







				Titanium Nitride (TiN) Coated

				M8 × 1.25 mm	55/64"	2 3/8"	Metric	6.8	0.2677"	VersaDrive Hex	7/16"	Holemaker Technology	Plug	3	9613N17	000000

Accessories for Taps

Required Chucks

Quick-Change

Strong-Hold

Quick-Change with

Clutch Overload

Protection

These chucks mount directly onto the square drive of your impact wrench. You can use any of these chucks when tapping through holes.

Impact Wrench Chucks with Clutch Overload Protection—Use to tap blind holes. The clutch will engage when the tap contacts the bottom of the hole to prevent it from breaking. Choose the chuck that’s rated for the hole diameter you are tapping.

Quick-Change Pull-Back Tool Release—Require just one hand to load. Push your tool in the chuck until you hear the ball detents click into place. To remove your tool, pull back the collar.

Strong-Hold Push-Forward Tool Release—Hold cutting tools more securely than quick-change chucks. To insert and remove cutting tools, you must push a collar forward. Since impact force drives your cutting tool the opposite way, it can’t come loose from the chuck while you work.

Manganese Phosphate-Coated Steel—The coating on these chucks prevents rust.

		For Shank
	For Square Drive Size	Type	Size	Overall Lg.	Material	For Blind Hole Dia.	Includes		Each
Impact Wrench Chucks







				Quick-Change Pull-Back Tool Release

				1/2"	VersaDrive Hex	7/16"	2 5/32"	Black-Oxide Steel	—	Retaining Ring, Retention Pin	9589N112	000000




						Strong-Hold Push-Forward Tool Release

						3/8"	VersaDrive Hex	7/16"	2"	Manganese Phosphate-Coated Steel	—	Retaining Ring, Retention Pin	9589N111	000000


						1/2"	VersaDrive Hex	7/16"	2 5/32"	Manganese Phosphate-Coated Steel	—	Retaining Ring, Retention Pin	9589N113	000000
						3/4"	VersaDrive Hex	7/16"	2 3/8"	Manganese Phosphate-Coated Steel	—	Retaining Ring, Retention Pin	9589N114	000000


						Impact Wrench Chucks with Clutch Overload Protection







										Quick-Change Pull-Back Tool Release

										1/2"	VersaDrive Hex	7/16"	4"	Manganese Phosphate-Coated Steel	5/16" to 1/2", 8 mm to 12 mm	Retaining Ring, Retention Pin	9613N21	000000

Optional Extensions

Extend your cutting tool’s reach. These extensions attach to your chuck and accept any tool with a VersaDrive hex shank.

		For Shank		Shank
	Overall Lg.	Type	Size	Type	Size	OD	Material		Each
Quick-Change Pull-Back Tool Release



		5"	VersaDrive Hex	7/16"	VersaDrive Hex	7/16"	1 7/64"	Black-Oxide Steel	9589N115	000000


		12"	VersaDrive Hex	7/16"	VersaDrive Hex	7/16"	1 7/64"	Black-Oxide Steel	9589N116	00000

Impact Wrench Drill Taps

Drill and thread holes in a single fluid step that’s 15 times faster than by hand. Made with an oversized shank and hardened high-speed steel, these drill taps are built to handle the high torque of your impact wrench to cut material quickly. A built-in pilot starts the hole while the taper chamfer gradually engages material for clean, accurate threads. Your wrench’s rapid hammering helps break and clear chips as you cut, so you don’t need to pause and reverse. This also means these drill taps are less likely to jam on chips and snap. They’re a great choice for quickly preparing threaded through holes in thin materials.

You’ll need a VersaDrive chuck (sold separately) to install these drill taps into your impact wrench. You can also get chucks for impact drivers (sold separately).

Titanium Nitride (TiN)-Coated Hardened High-Speed Steel—Titanium Nitride (TiN) coated taps resist heat and wear better than uncoated taps, letting them last up to twice as long.

Spiral Flute—Taps with spiral flutes keep chips clear by drawing them back toward the tap and out of the hole.

	Thread			Drill Bit											Taper Chamfer
	Size	Lg.	Overall Lg.	Size, mm	Decimal Size Equiv.	Point Angle	Max. Tapping Dp.	Flute Type	No. of Flutes	Thread Type	Pitch Dia. Limit	Shank Type	Hex Shank Size	Mfr.		Each
Titanium Nitride (TiN)-Coated Hardened High-Speed Steel



		M8 × 1.25 mm	13/16"	3 5/32"	6.8	0.268"	135°	5/16"	Spiral	2	Metric	D5	VersaDrive Hex	7/16"	Holemaker Technology	9672N23	000000

Accessories for Taps

Required Chucks

Quick-Change

Strong-Hold

These chucks mount directly onto the square drive of your impact wrench. They work with any tool with a VersaDrive hex shank, so you don’t need to swap chucks to use reamers, taps, and other tools.

Quick-Change Pull-Back Tool Release—Require just one hand to load. Push your tool in the chuck until you hear the ball detents click into place. To remove your tool, pull back the collar.

Manganese Phosphate-Coated Steel—The coating on these chucks prevents rust.

		For Shank
	For Square Drive Size	Type	Size	Overall Lg.	Material	Includes		Each
Quick-Change Pull-Back Tool Release



		1/2"	VersaDrive Hex	7/16"	2 5/32"	Black-Oxide Steel	Retaining Ring, Retention Pin	9589N112	000000


		Strong-Hold Push-Forward Tool Release



				3/8"	VersaDrive Hex	7/16"	2"	Manganese Phosphate-Coated Steel	Retaining Ring, Retention Pin	9589N111	000000


				1/2"	VersaDrive Hex	7/16"	2 5/32"	Manganese Phosphate-Coated Steel	Retaining Ring, Retention Pin	9589N113	000000
				3/4"	VersaDrive Hex	7/16"	2 3/8"	Manganese Phosphate-Coated Steel	Retaining Ring, Retention Pin	9589N114	000000

Optional Extensions

Extend your cutting tool’s reach. These extensions attach to your chuck and accept any tool with a VersaDrive hex shank.

		For Shank		Shank
	Overall Lg.	Type	Size	Type	Size	OD	Material		Each
Quick-Change Pull-Back Tool Release



		5"	VersaDrive Hex	7/16"	VersaDrive Hex	7/16"	1 7/64"	Black-Oxide Steel	9589N115	000000


		12"	VersaDrive Hex	7/16"	VersaDrive Hex	7/16"	1 7/64"	Black-Oxide Steel	9589N116	00000

		Each
Optional Chuck for Impact Drivers—1/4" Quick-Change Hex Shank (Male) to VersaDrive Hex Shank (Female)	9594N111	000000

Impact Wrench High-Speed Steel Drill Bits

Cut holes twice as fast as a power drill. Made with an oversized shank and hardened high-speed steel, these bits are built to handle the high torque of your impact wrench without snapping, even in large holes and hard materials such as stainless steel. A built-in pilot with a stepped tip centers the bit, prevents it from slipping, and drills with one third the pressure of standard bits. Since your wrench absorbs kickback, it won’t fight you if the bit snags, reducing wrist strain and fatigue during long jobs.

You’ll need a VersaDrive chuck (sold separately) to install these bits into your impact wrench. You can also get chucks for impact drivers and magnetic-base drills (both sold separately). For jobs that don’t require the torque of an impact tool, you can fit these bits directly into a _1/2" chuck on a standard power drill.

Short Length—The most rigid bits for drilling the straightest holes.

Titanium Nitride (TiN) Coated—Drill at higher speeds and last longer than uncoated and oxide-coated bits, especially on tough materials like hardened steel and nickel.

					Shank
	Drill Bit Size, mm	Decimal Size Equiv.	Overall Lg., mm	Max. Drilling Dp.	Type	Size	Drill Bit Point Type	Mfr.		Each
Short Length







				Titanium Nitride (TiN) Coated

				6.8	0.2677"	87	2"	VersaDrive Hex	7/16"	Stepped	Holemaker Technology	9620N28	000000

Accessories for Drill Bits

Required Chucks

Quick-Change

Strong-Hold

These chucks mount directly onto the square drive of your impact wrench. They work with any tool with a VersaDrive hex shank, so you don’t need to swap chucks to use reamers, taps, and other tools.

Quick-Change Pull-Back Tool Release—Require just one hand to load. Push your tool in the chuck until you hear the ball detents click into place. To remove your tool, pull back the collar.

Manganese Phosphate-Coated Steel—The coating on these chucks prevents rust.

		For Shank
	For Square Drive Size	Type	Size	Overall Lg.	Material	Includes		Each
Quick-Change Pull-Back Tool Release



		1/2"	VersaDrive Hex	7/16"	2 5/32"	Black-Oxide Steel	Retaining Ring, Retention Pin	9589N112	000000


		Strong-Hold Push-Forward Tool Release



				3/8"	VersaDrive Hex	7/16"	2"	Manganese Phosphate-Coated Steel	Retaining Ring, Retention Pin	9589N111	000000


				1/2"	VersaDrive Hex	7/16"	2 5/32"	Manganese Phosphate-Coated Steel	Retaining Ring, Retention Pin	9589N113	000000
				3/4"	VersaDrive Hex	7/16"	2 3/8"	Manganese Phosphate-Coated Steel	Retaining Ring, Retention Pin	9589N114	000000

Optional Extensions

Extend your cutting tool’s reach. These extensions attach to your chuck and accept any tool with a VersaDrive hex shank.

		For Shank		Shank
	Overall Lg.	Type	Size	Type	Size	OD	Material		Each
Quick-Change Pull-Back Tool Release



		5"	VersaDrive Hex	7/16"	VersaDrive Hex	7/16"	1 7/64"	Black-Oxide Steel	9589N115	000000


		12"	VersaDrive Hex	7/16"	VersaDrive Hex	7/16"	1 7/64"	Black-Oxide Steel	9589N116	00000

Optional Chucks

		Each
Optional Chuck for Impact Drivers - 1/4" Quick-Change Hex Shank (Male) to VersaDrive Hex Shank (Female)	9594N111	000000
Optional Chuck for Magnetic-Base Drills - 3/4" Round Shank (Male) to VersaDrive Hex Shank (Female)	9585N111	00000

Impact Wrench Tap and Drill Bit Sets

Cut a range of hole sizes two times faster than power drills, then thread them 15 times faster than by hand. Made with an oversized shank and hardened high-speed steel, the tools in these sets are built to handle the high torque of impact wrenches without snapping. The drill bits have a built-in pilot with a stepped tip that centers the bit, prevents slipping, and drills with one third the pressure of standard bits. Your wrench’s rapid hammering keeps the taps moving forward for smooth, continuous cutting. Those rapid blows also help break and clear chips as you cut, so you don’t need to pause and reverse, even in large holes and tough materials. Since your wrench absorbs kickback, it won’t fight you when a cutting tool snags, reducing wrist strain and fatigue over long jobs.

You’ll need a VersaDrive chuck (sold separately) to install the bits and taps into your impact wrench. You can also get chucks for impact drivers and magnetic-base drills (both sold separately). For jobs that don’t require the torque of an impact tool, you can fit these drill bits and taps directly into a _1/2" chuck on a standard power drill.

Titanium Nitride (TiN)-Coated Hardened High-Speed Steel Tools—Titanium nitride (TiN)-coated hardened high-speed steel tools have a longer tool life than carbon steel. They resist heat and wear better than uncoated tools, letting them last up to twice as long.

Taper Chamfer—Taper-chamfer taps have 7-10 chamfered threads at the tip for cutting into the workpiece. They require less torque than other chamfer types, making them a good choice for starting threads and tapping through holes. However, a longer taper means that they cannot thread as close to the bottom of closed-end holes.

	Chamfer Type	Tap Sizes Included	Overall Lg.	Thread Type	No. of Flutes	Pitch Dia. Limit	Drill Bit Sizes Included	Drill Bit Material	Shank Type	Hex Shank Size	Container Type	Mfr.		Each
Titanium Nitride (TiN)-Coated Hardened High-Speed Steel Tools



	8	Taper	M8 × 1.25 mm M10 × 1.50 mm M12 × 1.75 mm M16 × 2.00 mm	2 23/64" 2 3/4" 3 5/32" 3 27/64" 3 35/64"	Metric	2, 4	D11	6.8 mm 8.5 mm 10.5 mm 14 mm	Titanium Nitride (TiN)-Coated Hardened High-Speed Steel	VersaDrive Hex	7/16"	Foam Tray	Holemaker Technology	9706N12	0000000

Accessories for Tap and Drill Bit Sets

Required Chucks

Quick-Change

Strong-Hold

These chucks mount directly onto the square drive of your impact wrench. They work with any tool with a VersaDrive hex shank, so you don’t need to swap chucks to use drill bits, taps, reamers, and other tools.

Quick-Change Pull-Back Tool Release—Require just one hand to load. Push your tool in the chuck until you hear the ball detents click into place. To remove your tool, pull back the collar.

Manganese Phosphate-Coated Steel—The coating on these chucks prevents rust.

		For Shank
	For Square Drive Size	Type	Size	Overall Lg.	Material	Includes		Each
Quick-Change Pull-Back Tool Release



		1/2"	VersaDrive Hex	7/16"	2 5/32"	Black-Oxide Steel	Retaining Ring, Retention Pin	9589N112	000000


		Strong-Hold Push-Forward Tool Release



				3/8"	VersaDrive Hex	7/16"	2"	Manganese Phosphate-Coated Steel	Retaining Ring, Retention Pin	9589N111	000000


				1/2"	VersaDrive Hex	7/16"	2 5/32"	Manganese Phosphate-Coated Steel	Retaining Ring, Retention Pin	9589N113	000000
				3/4"	VersaDrive Hex	7/16"	2 3/8"	Manganese Phosphate-Coated Steel	Retaining Ring, Retention Pin	9589N114	000000

Optional Extensions

Extend your cutting tool’s reach. These extensions attach to your chuck and accept any tool with a VersaDrive hex shank.

		For Shank		Shank
	Overall Lg.	Type	Size	Type	Size	OD	Material		Each
Quick-Change Pull-Back Tool Release



		5"	VersaDrive Hex	7/16"	VersaDrive Hex	7/16"	1 7/64"	Black-Oxide Steel	9589N115	000000


		12"	VersaDrive Hex	7/16"	VersaDrive Hex	7/16"	1 7/64"	Black-Oxide Steel	9589N116	00000

Optional Chucks

		Each
Optional Chuck for Impact Drivers - 1/4" Quick-Change Hex Shank (Male) to VersaDrive Hex Shank (Female)	9594N111	000000
Optional Chuck for Magnetic-Base Drills - 3/4" Round Shank (Male) to VersaDrive Hex Shank (Female)	9585N111	00000

Impact Wrench Tap, Drill Bit, and Reamer Sets

13 Pieces

With everything but the impact wrench, these sets are the fastest way to prepare holes with a hand tool. They include a selection of cutting tools and a chuck that lets you swap them in and out of your impact wrench. Made with hardened steel, the cutting tools are built to handle the high torque of the wrench without snapping, even in hard metals. This also means the bits cut holes two times faster than with a power drill, and the taps thread holes 15 times faster than with a tap wrench. The rapid hammering breaks and clears chips as you work to prevent jams. Since your wrench absorbs kickback, it won’t fight you if a cutting tool snags, reducing wrist strain and fatigue over long jobs.

The chucks hold any tool with a VersaDrive hex shank—including countersinks and extractors—so just one chuck and wrench handle any cutting task.

13 Pieces—Includes a range of drill bits, taps, and step reamers. All cutting tools are coated with titanium nitride (TiN) to hold up at higher speeds and last longer than uncoated and oxide-coated bits, especially on tough materials like hardened steel and nickel.

			Shank
No. of Pieces	System of Measurement	Includes	Type	Size	Container Type	Mfr.		Each
13	Metric	Four Drill Bits with Stepped Tip—6.8 mm, 8.5 mm, 10.5 mm, 14 mm Drill Bit Sizes Four Taps—M8 × 1.25 mm, M10 × 1.50 mm, M12 × 1.75 mm, M16 × 2.00 mm Thread Sizes Three Step Reamer Drill Bits with Stepped Tip—8 mm-16 mm Dia. (increments of 2 mm), 14 mm-22 mm Dia. (increments of 2 mm), 18 mm-26 mm Dia. (increments of 2 mm) One Quick-Change Chuck for Impact Wrenches—For 1/2" Square Drive One 5" Extension	VersaDrive Hex	7/16"	Plastic Case	Holemaker Technology	9639N13	0000000

Accessories for Tap, Drill Bit, and Reamer Sets

Chucks for Impact Wrenches

Quick-Change

Strong-Hold

These chucks mount directly onto the square drive of your impact wrench. They work with any tool with a VersaDrive hex shank, so you don’t need to swap chucks to use countersinks, extractors, and other tools.

Quick-Change Pull-Back Tool Release—Require just one hand to load. Push your tool in the chuck until you hear the ball detents click into place. To remove your tool, pull back the collar.

Manganese Phosphate-Coated Steel—The coating on these chucks prevents rust.

		For Shank
	For Square Drive Size	Type	Size	Overall Lg.	Material	Includes		Each
Quick-Change Pull-Back Tool Release



		1/2"	VersaDrive Hex	7/16"	2 5/32"	Black-Oxide Steel	Retaining Ring, Retention Pin	9589N112	000000


		Strong-Hold Push-Forward Tool Release



				3/8"	VersaDrive Hex	7/16"	2"	Manganese Phosphate-Coated Steel	Retaining Ring, Retention Pin	9589N111	000000


				1/2"	VersaDrive Hex	7/16"	2 5/32"	Manganese Phosphate-Coated Steel	Retaining Ring, Retention Pin	9589N113	000000
				3/4"	VersaDrive Hex	7/16"	2 3/8"	Manganese Phosphate-Coated Steel	Retaining Ring, Retention Pin	9589N114	000000

Chucks for Impact Drivers

The _1/4" hex shank fits into impact drivers. These chucks work with any tool with a VersaDrive hex shank.

Quick-Change Pull-Back Tool Release—Require just one hand to load. Push your tool in the chuck until you hear the ball detents click into place. To remove your tool, pull back the collar.

	Shank		For Shank
	Type	Size	Type	Size	Overall Lg.	Material		Each
Quick-Change Pull-Back Tool Release



		Quick-Change Hex	1/4"	VersaDrive Hex	7/16"	3"	Black-Oxide Steel	9594N111	000000

Chucks for Magnetic-Base Drills

Image of Product. Front orientation. Magnetic-Base Drill Chucks and Adapters.

The _3/4" shank fits into magnetic-base drills. These chucks accept any tool with a VersaDrive hex shank.

Quick-Change Pull-Back Tool Release—Require just one hand to load. Push your tool in the chuck until you hear the ball detents click into place. To remove your tool, pull back the collar.

	Shank		For Shank
	Type	Size	Type	Size	Overall Lg.	Material		Each
Quick-Change Pull-Back Tool Release



		Weldon	3/4"	VersaDrive Hex	7/16"	2 9/32"	Black-Oxide Steel	9585N111	000000

Extensions

Extend your cutting tool’s reach. These extensions attach to your chuck and accept any tool with a VersaDrive hex shank.

Quick-Change Pull-Back Tool Release—Require just one hand to load. Push your tool in the chuck until you hear the ball detents click into place. To remove your tool, pull back the collar.

		For Shank		Shank
	Overall Lg.	Type	Size	Type	Size	OD	Material		Each
Quick-Change Pull-Back Tool Release



		5"	VersaDrive Hex	7/16"	VersaDrive Hex	7/16"	1 7/64"	Black-Oxide Steel	9589N115	000000


		12"	VersaDrive Hex	7/16"	VersaDrive Hex	7/16"	1 7/64"	Black-Oxide Steel	9589N116	00000