Choose a Category
For Jacobs Chuck Manufacturer Model Number For Jacobs ChuckManufacturer Model Number |
|---|
Overall Length Overall Length |
|---|
For Machine Spindle Morse Taper Diameter For Machine SpindleMorse Taper Diameter |
|---|
|
|
Morse Taper to Jacobs Taper Drill Chuck Arbors
The Morse taper end fits into a machine spindle and the Jacobs taper end is compatible with a Jacobs taper drill chuck. Morse taper spindles are most often found on drill presses. These arbors are made of hardened, precision-ground steel.
For Machine Spindle Morse Taper | For Drill Chuck Jacobs Taper | ||||||
|---|---|---|---|---|---|---|---|
| Number | Dia. | Number | Dia. | Overall Lg. | Material | Each | |
| 1 | 0.475" | 0 | 0.25" | 3 3/16" | Steel | 0000000 | 000000 |
| 1 | 0.475" | 1 | 0.384" | 3 25/64" | Steel | 0000000 | 00000 |
| 1 | 0.475" | 2 | 0.559" | 3 5/8" | Steel | 0000000 | 00000 |
| 1 | 0.475" | 3 | 0.811" | 4 1/64" | Steel | 0000000 | 00000 |
| 1 | 0.475" | 6 | 0.676" | 3 25/32" | Steel | 0000000 | 00000 |
| 1 | 0.475" | 33 | 0.624" | 3 25/32" | Steel | 0000000 | 00000 |
| 2 | 0.7" | 0 | 0.25" | 3 25/32" | Steel | 0000000 | 00000 |
| 2 | 0.7" | 1 | 0.384" | 3 63/64" | Steel | 0000000 | 00000 |
| 2 | 0.7" | 2 | 0.559" | 4 7/32" | Steel | 0000000 | 00000 |
| 2 | 0.7" | 3 | 0.811" | 4 39/64" | Steel | 0000000 | 00000 |
| 2 | 0.7" | 4 | 1.124" | 5 3/64" | Steel | 0000000 | 00000 |
| 2 | 0.7" | 6 | 0.676" | 4 3/8" | Steel | 0000000 | 00000 |
| 2 | 0.7" | 33 | 0.624" | 4 17/64" | Steel | 0000000 | 00000 |
| 3 | 0.938" | 1 | 0.384" | 4 47/64" | Steel | 0000000 | 00000 |
| 3 | 0.938" | 2 | 0.559" | 4 31/32" | Steel | 0000000 | 00000 |
| 3 | 0.938" | 3 | 0.811" | 5 23/64" | Steel | 0000000 | 00000 |
| 3 | 0.938" | 4 | 1.124" | 5 51/64" | Steel | 0000000 | 00000 |
| 3 | 0.938" | 5 | 1.413" | 5 29/32" | Steel | 0000000 | 00000 |
| 3 | 0.938" | 6 | 0.676" | 5 1/8" | Steel | 0000000 | 00000 |
| 3 | 0.938" | 33 | 0.624" | 5 1/8" | Steel | 0000000 | 00000 |
| 4 | 1.231" | 2 | 0.559" | 6" | Steel | 0000000 | 00000 |
| 4 | 1.231" | 3 | 0.811" | 6 3/8" | Steel | 0000000 | 00000 |
| 4 | 1.231" | 4 | 1.124" | 6 13/16" | Steel | 0000000 | 00000 |
| 4 | 1.231" | 5 | 1.413" | 6 15/16" | Steel | 0000000 | 00000 |
| 4 | 1.231" | 6 | 0.676" | 6 5/32" | Steel | 0000000 | 00000 |
| 4 | 1.231" | 33 | 0.624" | 6 5/32" | Steel | 0000000 | 00000 |
| 5 | 1.748" | 3 | 0.811" | 7 9/16" | Steel | 0000000 | 00000 |
| 5 | 1.748" | 4 | 1.124" | 8 1/8" | Steel | 0000000 | 00000 |
| 5 | 1.748" | 5 | 1.413" | 8 1/8" | Steel | 0000000 | 000000 |
Adapters for Morse Taper Drill Chuck Arbors
If your Morse taper arbor is too small or large for your machine spindle, insert it into one of these adapters. Also known as sleeves or shell sockets.
For Machine Spindle Morse Taper | For Arbor Shank Morse Taper | ||||||
|---|---|---|---|---|---|---|---|
| Number | Dia. | Number | Dia. | Overall Lg. | Material | Each | |
| 2 | 0.7" | 1 | 0.475" | 3 5/8" | Steel | 0000000 | 000000 |
| 2 | 0.7" | 3 | 0.938" | 7 23/32" | Steel | 0000000 | 00000 |
| 3 | 0.938" | 1 | 0.475" | 3 7/8" | Steel | 0000000 | 00000 |
| 3 | 0.938" | 2 | 0.7" | 4 3/8" | Steel | 0000000 | 00000 |
| 3 | 0.938" | 2 | 0.7" | 7 41/64" | Steel | 0000000 | 00000 |
| 3 | 0.938" | 4 | 1.231" | 9 7/16" | Steel | 0000000 | 00000 |
| 4 | 1.231" | 1 | 0.475" | 4 7/8" | Steel | 0000000 | 00000 |
| 4 | 1.231" | 2 | 0.7" | 4 7/8" | Steel | 0000000 | 00000 |
| 4 | 1.231" | 3 | 0.938" | 5 1/2" | Steel | 0000000 | 00000 |
| 4 | 1.231" | 3 | 0.938" | 9 29/64" | Steel | 0000000 | 00000 |
| 4 | 1.231" | 5 | 1.748" | 11 13/16" | Steel | 0000000 | 000000 |
| 5 | 1.748" | 2 | 0.7" | 6 1/8" | Steel | 0000000 | 00000 |
| 5 | 1.748" | 3 | 0.938" | 6 1/8" | Steel | 0000000 | 00000 |
| 5 | 1.748" | 4 | 1.231" | 6 11/16" | Steel | 0000000 | 00000 |
| 5 | 1.748" | 4 | 1.231" | 11 13/16" | Steel | 0000000 | 000000 |
| 6 | 2.494" | 4 | 1.231" | 8 9/16" | Steel | 0000000 | 000000 |
| 6 | 2.494" | 5 | 1.748" | 8 9/16" | Steel | 0000000 | 000000 |
Extensions for Morse Taper Drill Chuck Arbors
Insert your Morse taper arbor into one of these extensions to get additional reach.
