Drilling Hammers | McMaster-Carr

Filter by

Hammer Type

Overall Length

Grip Style

Face Material

Handle Material

Head Material

Face Shape

Face Diameter

For Bit Shank Type

Manufacturer

Power Source

Operating Mode

Material

Voltage

Length

RoHS

REACH

DFARS Specialty Metals

Exempt

Export Control Classification Number (ECCN)

EAR99

Handle Core Material

Fiberglass

Steel

For Maximum Drill Bit Size for Concrete

Chuck Type

Face Replaceable

Handle Replaceable

Face Length

104 Products

Sledge Hammers

Demolish material, form metal, and drive punches, chisels, and masonry drills. For demolition work, choose a hammer with a face that's harder than your workpiece. Longer and heavier hammers deliver greater impact.

Round Steel Face

Hickory Handle with Plain Grip

Steel Handle with

Textured Grip

Ribbed Grip

Polypropylene Handle

Rubber Handle

Textured Grip

20" and longer hammers can be swung with both hands to deliver a more powerful strike than shorter hammers.

10" to 16" long hammers are also known as engineers', drilling, club, and crack hammers. Use them for light demolition and tasks where longer hammers don't have room to swing.

Steel faces are the hardest metal faces we offer. Use them on stone, concrete, and hardened nails.

Hickory Handle—Hickory handles resist vibration.

Steel Handle—Steel handles are stronger than wooden handles but have less vibration resistance.

Fiberglass Handle Core—Handles with a fiberglass core resist breakage if you miss your mark.

Textured Grip—Textured grips provide slip resistance.

Ribbed Grip—Ribbed grips provide slip resistance.

	Face Dia.	Overall Lg.	Head Material	Handle Replaceable		Each
Hickory Handle with Plain Grip



	2 1/2	1 1/2"	15 1/2"	Steel	Yes	000000	000000


	3	1 5/8"	10"	Steel	Yes	000000	00000
	3	1 3/4"	15 1/2"	Steel	Yes	000000	00000
	4	1 3/4"	10"	Steel	Yes	000000	00000
	4	2"	15 1/2"	Steel	Yes	000000	00000
	6	2"	15 1/2"	Steel	Yes	000000	00000
	6	2 1/4"	35"	Steel	Yes	0000000	00000
	8	2"	15 1/2"	Steel	Yes	000000	00000
	8	2 3/8"	35"	Steel	Yes	0000000	00000
	10	2 1/2"	35"	Steel	Yes	0000000	00000
	12	2 5/8"	35"	Steel	Yes	0000000	00000


	16	2 7/8"	35"	Steel	Yes	0000000	00000
	20	3 1/8"	36"	Steel	Yes	0000000	00000


	Steel Handle with Textured Grip



			2	1 1/8"	10 1/2"	Steel	No	000000	00000


			2 1/2	1 1/2"	13 1/2"	Steel	No	0000000	00000
			3	1 1/4"	11"	Steel	No	000000	00000
			4	1 1/4"	11 1/2"	Steel	No	000000	00000
			4	1 1/4"	16"	Steel	No	000000	00000


			Polypropylene Handle with Fiberglass Core—Ribbed Grip



					3	1 3/8"	10"	Steel	Yes	0000000	00000


					3	1 5/8"	14"	Steel	Yes	00000000	00000
					4	1 1/2"	10"	Steel	Yes	0000000	00000
					4	1 3/4"	14"	Steel	Yes	00000000	00000
					6	2 1/8"	16"	Steel	Yes	0000000	00000
					6	2 1/8"	32"	Steel	Yes	0000000	00000
					8	2 1/4"	16"	Steel	Yes	0000000	00000
					8	2 1/4"	32"	Steel	Yes	0000000	00000
					10	2 1/2"	32"	Steel	Yes	0000000	00000
					12	2 5/8"	32"	Steel	Yes	0000000	00000
					20	3 1/4"	34 1/4"	Steel	Yes	0000000	000000


					Rubber Handle with Steel Handle Core—Textured Grip



							8	2 1/8"	24"	Steel	No	0000000	000000


							8	2 1/8"	30"	Steel	No	0000000	000000
							14	2 3/8"	30"	Steel	No	0000000	000000

Rectangular Bronze Face

Hickory Handle—Ribbed Grip

Polyurethane Rubber Handle

Ribbed Grip

10" to 16" long hammers are also known as engineers', drilling, club, and crack hammers. Use them for light demolition and tasks where longer hammers don't have room to swing.

Bronze faces are good for striking non-ferrous metal, such as aluminum, nickel, and titanium.

Hickory Handle—Hickory handles resist vibration.

Fiberglass Handle Core—Handles with a fiberglass core resist breakage if you miss your mark.

Ribbed Grip—Ribbed grips provide slip resistance.

	Mallets and Hammers								Replacement Handles
	Head Wt., lb.	Face Lg.	Face Wd.	Overall Lg.	Head Material	Handle Replaceable		Each		Each
Hickory Handle—Ribbed Grip



		1 3/8	7/8"	7/8"	12"	Bronze	Yes	0000000	000000	00000000	000000


		2 1/4	1 1/4"	1 1/4"	13"	Bronze	Yes	0000000	00000	00000000	00000
		4 1/4	1 1/2"	1 1/2"	14"	Bronze	Yes	0000000	000000	00000000	00000


		Polyurethane Rubber Handle with Fiberglass Core—Ribbed Grip



				1 1/2	7/8"	7/8"	12"	Bronze	No	0000000	00000	———	0


				2 3/8	1 1/4"	1 1/4"	12"	Bronze	No	0000000	000000	———	0
				4 3/8	1 1/2"	1 1/2"	14"	Bronze	No	0000000	000000	———	0

Round Brass Face


Hickory Handle—Textured Grip	Steel Handle with Textured Grip

20" and longer hammers can be swung with both hands to deliver a more powerful strike than shorter hammers.

Brass faces are suitable for striking steel, iron, and stone.

Hickory Handle—Hickory handles resist vibration.

Steel Handle—Steel handles are stronger than wooden handles but have less vibration resistance.

Textured Grip—Textured grips provide slip resistance.

	Hammers							Replacement Handles
	Head Wt., lb.	Face Dia.	Overall Lg.	Head Material	Handle Replaceable		Each		Each
Hickory Handle—Textured Grip



		8	2"	24"	Brass	Yes	0000000	0000000	0000000	000000


		10	2 1/4"	24"	Brass	Yes	0000000	000000	0000000	00000
		12	2 1/4"	31"	Brass	Yes	0000000	000000	0000000	00000
		15	2 1/2"	36"	Brass	Yes	0000000	000000	0000000	00000


		Steel Handle with Textured Grip



				8	2"	20"	Brass	No	00000000	000000	———	0


				10	2 1/8"	30"	Brass	No	00000000	000000	———	0
				15	2 1/2"	30"	Brass	No	00000000	000000	———	0

Bosch Electric Rotary Hammers


Style A	Style B

Style C	Style D

Style E

Use the rotary-only mode for general purpose drilling and driving fasteners (requires a chuck adapter or a magnetic bit holder). In rotary-percussion mode, the tool provides both a rotary drilling and hammering action. In the percussion-only mode, the tool provides only the hammering action. Use this mode when working with chisels and other masonry tools (see Chisels for Rotary Hammers). All have a variable speed motor—the further you depress the trigger, the faster the drill rotates.

For Spline Bit Shanks—Designed to drill larger holes than a SDS-Plus hammer, these models use spline-shank drill bits (see Spline-Shank Masonry Drill Bits and Spline-Shank Masonry Core Drill Bits). A powerful and durable hammer mechanism lets you drill deeper, larger holes in masonry and concrete in less time than with hammer drills.

For SDS-Plus Bit Shanks—Also known as SDS-Drive rotary hammers, these are lightweight and ideal for overhead work and drilling smaller holes. A powerful and durable hammer mechanism lets you drill deeper, larger holes in masonry and concrete in less time than with hammer drills. Use with SDS-Plus drill bits. Note: SDS-Plus and SDS-Max bits are not interchangeable.

For SDS-Max Bit Shanks—A deeper drive system minimizes wobble for straighter, more accurate holes and better overall performance to other rotary hammers. A powerful and durable hammer mechanism lets you drill deeper, larger holes in masonry and concrete in less time than with hammer drills. Use with SDS-Max drill bits (see SDS-Max-Shank Masonry Drill Bits and SDS-Max-Shank Core Drill Bits). Note: SDS-Plus and SDS-Max bits are not interchangeable.

12 Chisel Lock Positions and 36 Chisel Lock Positions—A chisel lock allows you to choose from 12 or 36 chisel positions to match the angle of many surfaces.

Model Number RH1255VC—Model number RH1255VC provides smooth starts and won't slow down as you drill deeper.

Built-In Safety Clutch—A built-in safety clutch protects you and the hammer if the bit gets stuck in your material.

Vibration Reduction—These rotary hammers have a vibration reduction system for increased user comfort, provides smooth starts, and won't slow down as you drill deeper.

		For Max. Rotary Hammer Bit Size for Concrete
	Style	Drill Bit	Core Drill Bit	Max. No-Load Rotational Speed, rpm	Max. No-Load Blows per min.	No. of Chisel Lock Positions	Overall Lg.	Wt., lb.	Current, amp	Gear Housing Material	Mfr. Model No.	Certification	Features		Each
For Spline Bit Shanks



		A	1 5/8"	4 1/8"	300	2,900	12	18 13/16"	14.5	13	Metal	11265EVS	UL Listed	Built-In Safety Clutch Chisel Lock Cushioned Grip Service-Reminder Light Vibration Reduction	0000000	0000000


		For SDS-Plus Bit Shanks



				B	1"	—	1,300	5,100	36	15"	6.4	8	—	GBH2-26	CSA-US Certified, UL Listed	Built-In Safety Clutch Chisel Lock	00000000	000000


				C	1"	—	1,300	5,800	36	17 1/4"	7	7.5	—	11255VSR	UL Listed	Built-In Safety Clutch Chisel Lock	00000000	000000
				D	1 1/8"	—	900	3,800	36	13 5/8"	8	8	—	RH328VCQ GBH3-28	UL Listed	Built-In Safety Clutch Chisel Lock	00000000	000000


				For SDS-Max Bit Shanks



						E	1 9/16"	4"	300	2,900	12	19"	15.2	12	Metal	RH540M	UL Listed	Built-In Safety Clutch Chisel Lock	00000000	000000


						E	2"	6"	200	2,150	12	23 1/2"	30	15	Metal	RH1255VC	C-UL Listed, CSA Certified, CSA-US Certified, ETL Listed, UL Listed	Built-In Safety Clutch Chisel Lock Cushioned Grip Service-Reminder Light	00000000	00000000

Milwaukee Cordless Hammer Drills

Just twist the collar ring and these tools will change from a standard cordless drill to a hammer drill.

The rotary-only mode is for general purpose drilling and driving fasteners. Use this mode with standard drill bits for wood and metal as well as masonry drill bits. In rotary-percussion mode, the tool provides both a rotary drilling and hammering action. The hammering action pounds concrete and masonry, which breaks up the material while it drills. Use this mode for drilling masonry materials using carbide-tipped masonry drill bits.

This drill has a variable speed motor—the further you depress the trigger, the faster the drill rotates. They also have an adjustable clutch that lets you adjust the torque.

See Batteries and Chargers for Milwaukee Cordless Tools for replacement batteries and chargers.

Keyless Chuck—Drills with keyless chuck open and close without a key for fast bit changes.

	For Max. Drill Bit Size for Steel	Max. No-Load Rotational Speed, rpm	Max. Torque, in·lbf	Max. No-Load Blows per min.	No. of Clutch Settings	Battery Charging Time (Battery Cap.)	Batteries Included	Overall Lg.	Wt., lb.	Mfr. Model No.	Certification		Each
Lithium Ion (Li-Ion) Battery







	Keyless Chuck

	18	1/2"	5/8"	1/2"	2,100	1,400	33,000	16	1 hr. (5 A·h)	Yes	7"	5	2904-22	C-UL Listed, UL Listed	00000000	0000000

Nonsparking Sledge Hammers

The faces and head are made of aluminum-bronze that is Factory Mutual approved, so these tools inhibit sparking and are nonmagnetic and corrosion resistant. They satisfy OSHA requirements that specify nonsparking tools for locations where flammable vapors and combustible residues are present. Use them to demolish material, form metal, and drive punches, chisels, and masonry drills. For demolition work, ensure that the workpiece is softer than the metal faces. Longer and heavier hammers deliver greater impact. All have a textured or ribbed grip for slip resistance. For replacement handles, see Fiberglass Hammer Handles.

Warning: Do not use these tools in direct contact with acetylene.

Aluminum Bronze Face


Fiberglass Handle with Textured Grip, 14" Overall Length	Fiberglass Handle with Ribbed Grip, 33" Overall Length

14" Overall Length—14" long hammers are also known as engineers', drilling, club, lump, and crack hammers. Use them for light demolition and tasks where longer hammers don't have room to swing.

33" Overall Length—33" long hammers can be swung with both hands to deliver a more powerful strike than shorter hammers.

	Face Dia.	Overall Lg.	Head Material	Handle Replaceable	Certification		Each
Fiberglass Handle with Textured Grip



	2	1 3/8"	14"	Aluminum Bronze	Yes	FM Approved	0000000	0000000


	2 1/2	1 3/8"	14"	Aluminum Bronze	Yes	FM Approved	0000000	000000
	2 3/4	1 1/2"	14"	Aluminum Bronze	Yes	FM Approved	0000000	000000
	3	1 1/2"	14"	Aluminum Bronze	Yes	FM Approved	0000000	000000


	Fiberglass Handle with Ribbed Grip



			6	2"	33"	Aluminum Bronze	Yes	FM Approved	0000000	000000


			8	2 1/8"	33"	Aluminum Bronze	Yes	FM Approved	0000000	000000
			10	2 1/4"	33"	Aluminum Bronze	Yes	FM Approved	0000000	000000
			16	2 5/8"	33"	Aluminum Bronze	Yes	FM Approved	0000000	000000

Milwaukee Electric Rotary Hammers

A powerful and durable hammer mechanism lets you drill deeper, larger holes in masonry and concrete in less time than with hammer drills. Also known as a SDS-Plus rotary hammer, this model is lightweight and ideal for overhead work and drilling smaller holes. Use with SDS-Plus drill bits. Note: SDS-Plus and SDS-Max bits are not interchangeable.

This model has a variable speed—the further you depress the trigger, the faster the speed.

35 Chisel Lock Positions—A chisel lock allows you to choose from 35 chisel positions to match the angle of many surfaces.

Built-In Safety Clutch—A built-in safety clutch protects you and the hammer if the bit gets stuck in your material.

	Max. No-Load Rotational Speed, rpm	Max. No-Load Blows per min.	No. of Chisel Lock Positions	Current, amp	Gear Housing Material	Overall Lg.	Wt., lb.	Mfr. Model No.	Certification	Features		Each
D-Handle and Pistol Grip



	1 1/8"	1,500	5,500	35	8	Metal	12 1/2"	7.5	5268-21	UL Listed	Built-In Safety Clutch Chisel Lock	00000000	0000000

DeWalt Electric Hammer Drills

Just twist the collar ring and this tool will change from a standard electric drill to a hammer drill.

This drill has a variable speed motor—the further you depress the trigger, the faster the drill rotates.

Keyed Chuck—Drills with keyed chuck can be tightened with the included key.

Trigger Lock for Continuous Use—Drills with a trigger lock allow for continuous use without holding down the trigger.

	For Max. Drill Bit Size for Concrete	For Max. Drill Bit Size for Steel	Max. No-Load Rotational Speed, rpm	Max. No-Load Blows per min.	Chuck Type	Chuck Key Included	Current, amp	Gear Housing Material	Overall Lg.	Wt., lb.	Mfr. Model No.	Certification	Features		Each
Pistol Grip



	1/2"	1/2"	1/2"	2,700	46,000	Keyed	Yes	7.8	Metal, Plastic	13"	5	DW505	CSA Certified, UL Listed	Overload Protection Side Handle Trigger Lock for Continuous Use	00000000	0000000

Bosch Electric Hammer Drills

Just push a switch and this tool will change from a standard electric drill to a hammer drill.

The rotary-only mode is for general purpose drilling and driving fasteners. Use this mode with standard drill bits for wood and metal. In rotary-percussion mode, the tool provides both a rotary drilling and hammering action. The hammering action pounds concrete and masonry, which breaks up the material while it drills. Use this mode for drilling masonry materials using carbide-tipped masonry drill bits.

This drill has a variable speed motor—the further you depress the trigger, the faster the drill rotates.

Keyed Chuck—Drills with keyed chuck can be tightened with the included key.

	For Max. Drill Bit Size for Concrete	For Max. Drill Bit Size for Steel	Max. No-Load Rotational Speed, rpm	Max. No-Load Blows per min.	Chuck Type	Chuck Key Included	Current, amp	Gear Housing Material	Overall Lg.	Wt., lb.	Mfr. Model No.	Certification	Features		Each
Pistol Grip



	1/2"	3/4"	1/2"	3,200	51,000	Keyed	Yes	8.5	Metal	13 1/2"	6	HD18-2	CSA Certified, UL Listed	Auxiliary 360° Handle	0000000	0000000

Slide Sledge Hammers

Strike work in tight spaces where standard hammers don't have room to swing. The steel face on these hammers is hard enough to demolish material and drive pins, punches, and masonry drills. To use, pull back the slide bar and forcefully push the bar forward into the hammer's steel chamber. This drives the face into the workpiece for a powerful strike. All have a ribbed grip for slip resistance.

Press-Fit Steel Face


Shown with 7/8" Dia. Face

	Face Dia.	Overall Lg.	Handle Replaceable	Includes		Each
Steel Handle—Ribbed Grip



	14	2"	30"	No	Carrying Bag	0000000	0000000


	21	2"	46"	No	Carrying Bag	0000000	000000

Hammer Faces

		Each
7/8" Dia. Push-On Steel Face	0000000	0000000

DeWalt Electric Rotary Hammers

A powerful and durable hammer mechanism lets you drill deeper, larger holes in masonry and concrete in less time than with hammer drills. Also known as a SDS-Plus rotary hammer, this model is lightweight and ideal for overhead work and drilling smaller holes. Use with SDS-Plus drill bits . Note: SDS-Plus and SDS-Max bits are not interchangeable.

48 Chisel Lock Positions—A chisel lock allows you to choose from 48 chisel positions to match the angle of many surfaces.

Built-In Safety Clutch—A built-in safety clutch protects you and the hammer if the bit gets stuck in your material.

	For Max. Rotary Hammer Bit Size for Concrete
	Drill Bit	Core Drill Bit	Max. No-Load Rotational Speed, rpm	Max. No-Load Blows per min.	No. of Chisel Lock Positions	Current, amp	Gear Housing Material	Overall Lg.	Wt., lb.	Mfr. Model No.	Certification	Features		Each
D-Handle and Pistol Grip



		1 1/8"	2 1/2"	1,450	5,350	48	8.5	Metal, Plastic	16 3/4"	7.2	D25263K	UL Listed	Built-In Safety Clutch Chisel Lock	00000000	0000000

Milwaukee Electric Hammer Drills

Just push a switch and this tool will change from a standard electric drill to a hammer drill.

This model has a variable speed motor—the further you depress the trigger, the faster the drill rotates. It also has a detachable Quik-Lok cord. See Milwaukee Quik-Lok Power Cords for replacement cord.

Keyed Chuck—Drills with keyed chuck can be tightened with the included key.

	For Max. Drill Bit Size for Concrete	For Max. Drill Bit Size for Steel	Max. No-Load Rotational Speed, rpm	Max. No-Load Blows per min.	Chuck Type	Chuck Key Included	Current, amp	Gear Housing Material	Overall Lg.	Wt., lb.	Mfr. Model No.	Certification	Features		Each
Pistol Grip



	1/2"	5/8"	1/2"	2,800	40,000	Keyed	Yes	8	Metal	11 1/2"	4.9	5376-20	CSA Certified, UL Listed	Side Handle	00000000	0000000

Replacement Drill Chuck Keys

		Each
Replacement Drill Chuck Key for ½" Max. Drill Bit Size	0000000	00000

Makita Cordless Hammer Drills

Just twist the collar ring and this tool will change from a standard cordless drill to a hammer drill.

This drill has a variable speed motor—the further you depress the trigger, the faster the drill rotates. The adjustable clutch lets you adjust the torque.

A lithium ion (Li-Ion) battery (sold separately) powers these cordless drills, which means they weigh less and have a longer run-time than cordless drills that use nickel cadmium (NiCad) batteries.

Keyless Chuck—Drills with keyless chuck open and close without a key for fast bit changes.

Cannot Be Sold Outside United States—Drills cannot be sold to the listed areas due to product regulations.

	Hammer Drills																	Batteries		Battery Chargers
	Voltage, V DC	For Max. Bit Shank Size	For Max. Drill Bit Size for Concrete	For Max. Drill Bit Size for Steel	Max. No-Load Rotational Speed, rpm	Max. Torque, in·lbf	Max. No-Load Blows per min.	No. of Clutch Settings	Battery Charging Time (Battery Cap.)	Batteries Included	Overall Lg.	Wt., lb.	Mfr. Model No.	Certification	Cannot Be Sold To		Each		Each		Each
Lithium Ion (Li-Ion) Battery







				Keyless Chuck

				18	1/2"	5/8"	1/2"	2,000	750	30,000	12	40 min. (4 A·h)	No	8 7/8"	4	XPH03Z	UL Listed	Outside United States	00000000	0000000	00000000	0000000	00000000	0000000

Create-Your-Own Sledge Hammers

Assembled Hammer

Swing these long, heavy hammers with both hands to demolish material, form metal, and drive punches, chisels, and masonry drills. Mix faces of different materials or hardnesses to create the perfect striking tool. For demolition work, choose faces that are harder than your workpiece. The head has two pieces that clamp together to grip faces tightly.

Bodies with Clamping-Head Face Mount


	Clamping-Head Face

Bodies consist of a head, nut, and handle. To assemble, loosen the nut under the head, insert the faces, and tighten the nut.

	Bodies							Replacement Handles
	Head Wt., lb.	For Face Dia.	Overall Lg.	Head Material	Handle Replaceable		Each		Each
Hickory Handle with Plain Grip



		7	2 3/4"	36"	Iron	Yes	0000000	0000000	0000000	000000

Accessories for Hammers

Urethane Rubber and Polyethylene Faces

Urethane Rubber Face

Polyethylene Face

Polyethylene Face and Urethane Rubber Face—Polyethylene faces and urethane rubber faces are softer than metal faces, so they're good for sheet metal work.

Hard Face—Hard faces have a hardness similar to that of a bowling ball.

Extra-Hard Face—Extra-hard faces have a hardness similar to that of a hard hat.

Face Hardness Rating—All have a face hardness rating for comparing their hardness with other rubber and plastic faces.

		Hard Face (Off-White)		Extra-Hard Face (Yellow)
	Face Dia.		Each		Each
Clamping-Head Urethane Rubber Faces



		2 3/4"	0000000	000000	———	0


		Clamping-Head Polyethylene Faces



				2 3/4"	———	0	0000000	000000

Rawhide Leather Faces

Rawhide Leather

Faces

Rawhide Leather Faces—Rawhide leather faces are more durable than plastic and won't distort the surface of soft sheet metal, such as brass, aluminum, and copper.

	Cannot Be Sold To		Each
Clamping-Head/Press-Fit Rawhide Leather Faces



	2 3/4"	Canada	0000000	000000

Dead Blow Sledge Hammers

These hammers have a head loaded with metal shot for added weight and a controlled impact with minimal rebound. A fluorescent orange color makes them easy to see. Use them to demolish material, form metal, and drive punches, chisels, and masonry drills. All have a long handle and heavy head to deliver a powerful strike. Made from polyurethane rubber, the faces resist oil and solvents and won't crack under high impact. The hardness of the faces is similar to that of a tire tread.

Polyurethane Rubber Face

Image of Product. Front orientation. Hammers. Dead Blow Sledge Hammers .

	Face Dia.	Face Hardness Rating (Face Color)	Overall Lg.	Head Material	Handle Color	Handle Replaceable		Each
Polyurethane Rubber Handle with Steel Core—Textured Grip



	10 1/2	3 3/8"	Soft (Fluorescent Orange)	30"	Polyurethane Rubber	Fluorescent Orange	No	0000000	0000000


	11 1/2	3 3/8"	Soft (Fluorescent Orange)	36 1/4"	Polyurethane Rubber	Fluorescent Orange	No	0000000	000000

Replaceable-Face Dead Blow Sledge Hammers

Change out the faces when they become worn. The head on these hammers is loaded with metal shot for added weight and a controlled impact with minimal rebound. Use them to demolish material, form metal, and drive punches, chisels, and masonry drills. For demolition work, choose a hammer with a face that's harder than your workpiece. Longer and heavier hammers deliver greater impact.

Screw-In Polyurethane Rubber Faces

Image of Product. Front orientation. Hammers. Replaceable-Face Dead Blow Sledge Hammers , Round Face, Screw-In Face.

Screw-in hammers have polyurethane rubber faces that resist oils and solvents and won't crack under high impact. Each face can be switched out for a face with a different hardness. The medium face has a hardness that's suitable for most general purpose applications. The extra-hard face has a hardness similar to that of a hard hat.

				Face
	Head Wt., lb.	Face Dia.	Face Hardness Rating (Face Color)	Thread Size	Thread Type	Overall Lg.	Head Material	Handle Replaceable		Each
Hickory Handle with Plain Grip



		7 1/2	2 1/2"	Medium (Green) × Extra Hard (Black)	7/16"-14	UNC	32"	Iron	Yes	000000	0000000


		7 1/2	3"	Medium (Green) × Extra Hard (Black)	1/2"-13	UNC	35"	Aluminum	Yes	000000	000000
		11 1/2	3"	Medium (Green) × Extra Hard (Black)	1/2"-13	UNC	35"	Iron	Yes	000000	000000

Polyurethane Rubber Faces

Polyurethane

Rubber Face

Soft Face—Soft faces have a hardness similar to that of a tire tread.

Medium Face—Medium faces have a hardness that's suitable for most general purpose applications.

Hard Face—Hard faces have a hardness similar to that of a bowling ball.

Extra-Hard Face—Extra-hard faces have a hardness similar to that of a hard hat.

		Face		Soft (Orange)		Medium (Green)		Hard (Red)		Extra Hard (Black)
	Face Dia.	Thread Size	Thread Type		Each		Each		Each		Each
Screw-In Polyurethane Rubber Faces



		2 1/2"	7/16"-14	UNC	0000000	000000	0000000	000000	0000000	000000	0000000	000000


		3"	1/2"-13	UNC	0000000	00000	0000000	00000	0000000	00000	0000000	00000

Press-Fit Nylon Face

Press-fit hammers have nylon plastic faces with a hardness similar to that of a bowling ball.

	Face Dia.	Face Hardness Rating (Face Color)	Overall Lg.	Head Material	Handle Replaceable		Each
Hickory Handle with Plain Grip



	13 1/4	4"	Hard (White)	39 1/4"	Steel	Yes	0000000	0000000


	19 3/4	4"	Hard (White)	39 1/4"	Steel	Yes	0000000	000000

Nylon Faces

		Hard Face (White)
Press-Fit Nylon Faces


4"	0000000	000000

DeWalt Cordless Hammer Drills

Just twist the collar ring and this tool will change from a standard cordless drill to a hammer drill.

This drill has a variable speed motor—the further you depress the trigger, the faster the drill rotates. The adjustable clutch lets you adjust the torque.

See Batteries and Chargers for DeWalt Cordless Tools for replacement batteries and chargers.

Keyless Chuck—Drills with keyless chuck open and close without a key for fast bit changes.

	Hammer Drills															Batteries
	Voltage, V DC	For Max. Bit Shank Size	For Max. Drill Bit Size for Concrete	For Max. Drill Bit Size for Steel	Max. No-Load Rotational Speed, rpm	Max. No-Load Blows per min.	No. of Clutch Settings	Battery Charging Time (Battery Cap.)	Batteries Included	Overall Lg.	Wt., lb.	Mfr. Model No.	Certification		Each		Each
Lithium Ion (Li-Ion) Battery







				Keyless Chuck

				20	1/2"	1/2"	1/2"	2,000	38,250	11	1 hr. (8 A·h)	Yes	7 5/8"	4	DCD1007WW1	CSA Certified	000000000	0000000	000000000	0000000

DeWalt Cordless Rotary Hammers

A powerful and durable hammer mechanism lets you drill deeper, larger holes in masonry and concrete in less time than with cordless hammer drills.

In rotary-percussion mode, the tool provides both a rotary drilling and hammering action. Use SDS-Plus shank drill bits for fast penetration into masonry materials. Note: SDS-Plus and SDS-Max bits are not interchangeable. Use the rotary-only mode for general purpose drilling and driving fasteners (requires a chuck adapter or a magnetic bit holder). In the percussion-only mode, the tool provides only the hammering action. Use this mode when working with chisels and other masonry tools (see Chisels for Rotary Hammers).

	Rotary Hammers													Batteries		Battery Chargers
	Voltage, V DC	For Max. Rotary Hammer Drill Bit Size for Concrete	Max. No-Load Rotational Speed, rpm	Max. Torque, in·lbf	Max. No-Load Blows per min.	Battery Charging Time (Battery Cap.)	Batteries Included	Overall Lg.	Wt., lb.	Mfr. Model No.	Certification		Each		Each		Each
Lithium Ion (Li-Ion) Battery



		20	1/2"	1,100	18.5	4,600	1 hr. (5 A·h)	Yes	11 7/8"	6.8	DCH273P2	UL Listed	0000000	0000000	0000000	0000000	000000000	000000