Maximum No-Load Speed Maximum No-Load Speed |
---|
|
Overall Height Overall Height |
---|
|
|
|
RoHS (Restriction of Hazardous Substances) RoHS (Restriction ofHazardous Substances) |
---|
|
REACH (Registration, Evaluation, Authorization and Restriction of Chemicals) REACH (Registration,Evaluation, Authorization and Restriction of Chemicals) |
---|
|
Small-Hole Precision Benchtop Drill Presses

Use for drilling small holes. A sensitive belt-drive motor reduces drill breakage and damage.
Max. Workpiece Dia. | For Max. Drill Bit Size for Steel | For Max. Bit Shank Size | Max. No-Load Speed, rpm | Chuck Manufacturer | No. of Speeds | Spindle Jacobs Taper No. | Spindle Travel | Motor Power, hp | Motor Current, A | Wt., lbs. | Each | |
120V AC—Single Phase | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
Jacobs Spindle Shank | ||||||||||||
7" | 1/8" | 1/8" | 20,000 | Albrecht | Variable | 0 | 1 1/2" | 1/5 | 2 | 25 | 0000000 | 000000000 |
Adjustable-Position Milwaukee Magnetic-Base Drill Presses


Lock the magnet to secure the base and then move the motor to center the cutter for pinpoint accuracy. You can move the motor 3/4" forward and backward and tilt it 20° left and right. Switch these drills from forward to reverse without stopping—ideal for both drilling and tapping applications (not recommended for use with pipe taps). In addition, a dial lets you adjust the speed to match your application, making these great for drilling hard materials at slow speeds. Base attaches to flat ferrous surfaces (such as steel and cast iron). Holding force (also called drill point breakaway) is calculated against a 1" thick steel plate. Drills include a spoked feed handle that mounts on either side.
Drill presses for 3/4" and 1 1/4" max. drill bit sizes can be used with carbide-tipped hollow-core cutters.
Drill press for 1/2" max. drill bit size cannot be used with hollow-core cutters. It is not for use with 5/8"-11 and 1/2"-13 taps.
Note: To avoid damaging the electromagnet, do not mount press to a base that has a welder already grounded to it.
O'all | ||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
For Max. Drill Bit Size | For Max. Cutter Dia. | For Max. Bit Shank Size | For Max. Tap Size | Max. No-Load Speed, rpm | Spindle Morse Taper No. | Spindle Travel | Holding Force, lbs. | For Min. Surface Thick. | Lg. | Wd. | Ht. | Wt., lbs. | Manufacturer Model No. | Specifications Met | Each | |
120V AC | ||||||||||||||||
Chuck Spindle Shank | ||||||||||||||||
3/4" | 2 1/4" | 3/4" | 1"-14 | 350 | __ | 11" | 1,600 | 1/2" | 17" | 7 1/2" | 32 1/2" | 70 | 4206-1 | UL Listed | 0000000 | 000000000 |
1/2" | __ | 1/2" | 5/8"-18 | 600 | __ | 11" | 1,600 | 1/2" | 15 1/4" | 7 1/2" | 29 1/2" | 60 | 4204-1 | UL Listed | 0000000 | 00000000 |
Morse Spindle Shank | ||||||||||||||||
1 1/4" | 2 1/4" | __ | 1"-14 | 750 | 3 | 11" | 1,600 | 1/2" | 17" | 7 1/2" | 32 1/2" | 70 | 4209-1 | UL Listed | 0000000 | 00000000 |
1 1/4" | 2 1/4" | __ | 1"-14 | 500 | 3 | 11" | 1,600 | 1/2" | 17" | 7 1/2" | 32 1/2" | 70 | 4208-1 | UL Listed | 0000000 | 00000000 |
Fixed-Position Milwaukee Magnetic-Base Drill Presses


Switch these drills from forward to reverse without stopping—ideal for both drilling and tapping applications (not recommended for use with pipe taps). In addition, a dial lets you adjust the speed to match your application, making these great for drilling hard materials at slow speeds. Base attaches to flat ferrous surfaces (such as steel and cast iron). Holding force (also called drill point breakaway) is calculated against a 1" thick steel plate. Drills include a spoked feed handle that mounts on either side.
Drill presses for 3/4" and 1 1/4" max. drill bit sizes can be used with carbide-tipped hollow-core cutters.
Drill press for 1/2" max. drill bit size cannot be used with hollow-core cutters. It is not for use with 5/8"-11 and 1/2"-13 taps.
Note: To avoid damaging the electromagnet, do not mount press to a base that has a welder already grounded to it.
O'all | ||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
For Max. Drill Bit Size | For Max. Cutter Dia. | For Max. Bit Shank Size | For Max. Tap Size | Max. No-Load Speed, rpm | Spindle Morse Taper No. | Spindle Travel | Holding Force, lbs. | For Min. Surface Thick. | Lg. | Wd. | Ht. | Wt., lbs. | Manufacturer Model No. | Specifications Met | Each | |
120V AC | ||||||||||||||||
Chuck Spindle Shank | ||||||||||||||||
1/2" | __ | 1/2" | 5/8"-18 | 600 | __ | 9" | 1,600 | 1/2" | 14 1/2" | 7 1/2" | 25 1/2" | 50 | 4202/4253-1 | UL Listed | 0000000 | 000000000 |
3/4" | 2 1/4" | 3/4" | 1"-14 | 350 | __ | 9" | 1,600 | 1/2" | 16 1/4" | 7 1/2" | 27" | 65 | 4210-1 | UL Listed | 0000000 | 00000000 |
Morse Spindle Shank | ||||||||||||||||
1 1/4" | 2 1/4" | __ | 1"-14 | 750 | 3 | 9" | 1,600 | 1/2" | 16 1/4" | 7 1/2" | 27" | 65 | 4202/4292-1 | UL Listed | 0000000 | 00000000 |
1 1/4" | 2 1/4" | __ | 1"-14 | 500 | 3 | 9" | 1,600 | 1/2" | 16 1/4" | 7 1/2" | 27" | 65 | 4202/4297-1 | UL Listed | 0000000 | 00000000 |
Economy Benchtop Drill Presses



Drill presses that cannot be sold to Canada are restricted by local energy efficiency regulations.
Economy Benchtop Drill Presses | Replacement Spring Cap Assembly | ||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Max. Workpiece Dia. | Max. Table Cap., lbs. | For Max. Drill Bit Size for Cast Iron | For Max. Bit Shank Size | Max. No-Load Speed, rpm | Chuck Key Included | No. of Speeds | Spindle Jacobs Taper No. | Spindle Morse Taper No. | Spindle Travel | Motor Power, hp | Motor Current, A | Wt., lbs. | Cannot Be Sold To | Each | Each | ||
120V AC—Single Phase | |||||||||||||||||
Jacobs Spindle Shank | |||||||||||||||||
10" | 70 | 1/2" | 1/2" | 3,070 | Yes | 5 | 33 | __ | 2 1/2" | 1/3 | 4.1 | 70 | __ | 00000000 | 0000000 | 00000000 | 000000 |
13 1/4" | 80 | 1/2" | 1/2" | 3,350 | Yes | 16 | 33 | __ | 3 1/4" | 1/3 | 6 | 120 | Canada | 0000000 | 000000 | 0000000 | 00000 |
120V AC/240V AC—Single Phase | |||||||||||||||||
Morse Spindle Shank | |||||||||||||||||
15" | 100 | 5/8" | 5/8" | 3,450 | Yes | 16 | __ | 2 | 5" | 1/2 | 7.3 | 150 | __ | 0000000 | 00000000 | 0000000 | 00000 |
Replacement Spindle Assembly for Drill Presses with Morse Spindle Shanks | 0000000 | Each | 0000000 |
Extended-Reach Economy Benchtop Drill Presses

To accommodate large, odd-shaped pieces of material, the head of this drill press moves 12" forward and backward. It also tilts 45° left and 90° right (as viewed when facing the drill press).
For Max. Drill Bit | ||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Max. Workpiece Dia. | Max. Table Cap., lbs. | For Bit Shank Type | Size for Steel | Size for Cast Iron | For Max. Bit Shank Size | Max. No-Load Speed, rpm | Chuck Key Included | No. of Speeds | Spindle Morse Taper No. | Spindle Travel | Motor Power, hp | Motor Current, A | Wt., lbs. | Current | Each | |
120V AC—Single Phase | ||||||||||||||||
Morse Spindle Shank | ||||||||||||||||
33" | 70 | Hex, Round | 3/8" | 5/8" | 5/8" | 3,100 | Yes | 5 | 2 | 3 5/32" | 1/2 | 5 | 95 | 4.8A | 00000000 | 0000000 |
Multispeed Economy Floor Drill Presses



Select from a number of speeds by repositioning the drive belt before starting the drill press.
Multispeed Economy Floor Drill Presses | Replacement Spring Cap Assembly | ||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Max. Workpiece Dia. | Max. Table Cap., lbs. | For Max. Drill Bit Size for Steel | For Max. Bit Shank Size | Max. No-Load Speed, rpm | Chuck Key Included | No. of Speeds | Spindle Morse Taper No. | Spindle Travel | Motor Power, hp | Current | Wt., lbs. | Each | Each | ||
120V AC/240V AC—Single Phase | |||||||||||||||
Morse Spindle Shank | |||||||||||||||
15" | 100 | 5/8" | 5/8" | 3,450 | Yes | 16 | 2 | 5" | 1/2 | 7.3A | 165 | 0000000 | 000000000 | 0000000 | 000000 |
17" | 100 | 5/8" | 5/8" | 3,450 | Yes | 16 | 2 | 5" | 1 | 10A | 180 | 0000000 | 00000000 | 0000000 | 00000 |
120V AC—Single Phase | |||||||||||||||
Morse Spindle Shank | |||||||||||||||
20" | 65 | 1" | 3/4" | 4,200 | Yes | 12 | 3 | 4 3/4" | 1 | 13.5A | 315 | 00000000 | 00000000 | 000000 | 00 |
Variable-Speed Economy Floor Drill Presses

Turn the dial on this drill press while it is running to get the optimum speed for your job. A laser projects a crosshair at the point of bit contact and a digital readout displays the spindle speed.
Max. Workpiece Dia. | Max. Table Cap., lbs. | For Max. Drill Bit Size for Steel | For Max. Bit Shank Size | Max. No-Load Speed, rpm | Spindle Morse Taper No. | Spindle Travel | Motor Power, hp | Current | Wt., lbs. | Each | |
120V AC/240V AC—Single Phase | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
Morse Spindle Shank | |||||||||||
18" | 88 | 5/8" | 5/8" | 3,000 | 2 | 6" | 1 | 15A | 245 | 0000000 | 000000000 |
Extended-Reach Economy Floor Drill Presses

To accommodate large, odd-shaped pieces of material, the head of this drill press moves 12" forward and backward. It also tilts 45° left and 90° right (as viewed when facing the drill press).
For Max. Drill Bit | ||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Max. Workpiece Dia. | Max. Table Cap., lbs. | Size for Steel | Size for Cast Iron | For Max. Bit Shank Size | Max. No-Load Speed, rpm | Chuck Key Included | No. of Speeds | Spindle Morse Taper No. | Spindle Travel | Motor Power, hp | Current | Wt., lbs. | Each | |
120V AC—Single Phase | ||||||||||||||
Morse Spindle Shank | ||||||||||||||
33" | 50 | 3/8" | 5/8" | 5/8" | 3,100 | Yes | 5 | 2 | 3 5/32" | 1/2 | 4.8A | 143 | 00000000 | 0000000 |
Floor Drill Presses


The weight and rigidity of these presses prevent vibration so you can maintain close tolerances for high-quality metal drilling. Turn the dial on these drill presses while they are running to get the optimum speed for your job.
Drill presses with 20" max. workpiece diameter have a safety guard that swings away for easy tool changes.
Max. Workpiece Dia. | Max. Table Cap., lbs. | For Max. Drill Bit Size for Steel | For Max. Bit Shank Size | Max. No-Load Speed, rpm | Chuck Key Included | No. of Speeds | Spindle Morse Taper No. | Spindle Travel | Motor Power, hp | Current | Wt., lbs. | Each | |
120V AC—Single Phase | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Morse Spindle Shank | |||||||||||||
18 1/8" | 200 | 1 1/16" | 3/4" | 1,200 | Yes | Variable | 3 | 5 3/8" | 2 | 6.8A | 675 | 000000 | 000000000 |
120V AC/240V AC—Single Phase | |||||||||||||
Morse Spindle Shank | |||||||||||||
20" | 300 | 7/8" | __ | 2,000 | No | Variable | 3 | 6 1/2" | 1 1/2 | 17.9A | 590 | 0000000 | 00000000 |
240V AC—Three Phase | |||||||||||||
Morse Spindle Shank | |||||||||||||
20" | 300 | 7/8" | __ | 2,000 | No | Variable | 3 | 6 1/2" | 1 1/2 | 17.9A | 590 | 0000000 | 00000000 |
440V AC—Three Phase | |||||||||||||
Morse Spindle Shank | |||||||||||||
20" | 300 | 7/8" | __ | 2,000 | No | Variable | 3 | 6 1/2" | 1 1/2 | 17.9A | 590 | 0000000 | 00000000 |
Optional Morse Taper Arbor with Drill Chuck for 20" Floor Drill Presses | 0000000 | Each | 0000000 |
Motors for Mobile Drilling Rigs

Use this motor with a Milwaukee mobile drilling rig for masonry drill bits. It has triple gear reduction and a clutch to protect against overload. A built-in water swivel and adapter accepts a standard water hose and water control valve.
NEMA Plug | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
For Bit Shank Thread Size | Max. No-Load Speed, rpm | No. of Speeds | Current, A | Voltage | Connection Type | Style | Wt. | Manufacturer | Manufacturer Model No. | Each | |
1 1/4"-7 | 900 | 2 | 20 | 120V AC | Turn Lock | L5-20 | 25 lbs. | Milwaukee | 4096 | 0000000 | 0000000 |
Mobile Drilling Rigs for Masonry Drill Bits

Roll this drilling rig to where you need it and cut holes in masonry, reinforced concrete, tile, marble, and natural stone. Rig and motor are sold separately. For drill bits, see Masonry Drill Bits for Drilling Rigs
The rig has a rack-and-pinion feed mechanism and feed wheel that mounts on either side of the column. The column can be set at any angle up to 45° for when angled drilling is required. The base has a mounting slot to secure it to the floor or wall. The meter box indicates proper drilling pressure and speed.
When you need to use a drill bit size larger than 10" in your drilling rig, add a spacer assembly to increase its drill bit size up to 14".
Drilling Rigs | |||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Column | Spacer Assemblies | ||||||||||||||
For Max. Masonry Drill Bit Size | Max. Hole Dia. | Wt., lbs. | O'all Ht. | Meter Box Plug Connection Type | Meter Box Plug NEMA Style | Travel | Ht. | Range of Motion | Manufacturer | Manufacturer Model No. | Includes | Each | Each | ||
Cast Aluminum Base | |||||||||||||||
10" | 10" | 105 | 47" | Turn Lock | L5-20 | 28" | 43 1/2" | 0°-45° | Milwaukee | 4136 | Air Filter, Air Hose, Bubble Level | 0000000 | 000000000 | 0000000 | 0000000 |
Spacer Assemblies for Mobile Drilling Rigs

Add these spacer assemblies to your drilling rig to allow it to accept drill bit sizes up to 14".
For Max. Masonry Drill Bit Size | Manufacturer | Manufacturer Model Number | Each | |
14" | Milwaukee | 49-67-0110 | 0000000 | 0000000 |