Strong and durable, these multipurpose bits are for use with bit screwdrivers. They are often used with power tools to install sheet metal screws.

The toughest bits available, these withstand the shock and twisting force of impact drivers.

The small-diameter shaft can access screws in narrow recessed holes.

Thread these bits directly into your driving tool for minimal wobble in assembly applications.

An exterior stop collar prevents fasteners from being driven too deep. Use with soft material such as drywall, wood, and fiberboard.

A wide tip makes good contact in shallow and coated screw recesses, such as those filled with paint.

The toughest bits available, these withstand the shock and twisting force of impact drivers.

A retaining ring at the tip grips inside the recess to ensure screws won't slip off the bit.

Protect your stainless steel screws by using a stainless steel bit. If steel flakes off a standard bit and into the recess, it can lead to rust and contamination. These bits eliminate that risk.

Less likely to crack or shatter under high torque than standard bits, these are often used with power tools to install machine screws.

Remove screws in hard-to-reach places. A spring-loaded sleeve guides bits onto the screw head and keeps them from slipping out.

Bits have a different size at each end.

The toughest bits available, these withstand the shock and twisting force of impact drivers.

When you don't have exact alignment between the fastener and the tool, the ball end allows angled entry to turn screws in hard-to-reach areas.

Protect your stainless steel screws by using a stainless steel bit. If steel flakes off a standard bit and into the recess, it can lead to rust and contamination. These bits eliminate that risk.

Strong and durable, these multipurpose bits are for use with bit screwdrivers. They're designed for screws with a square recess in the head and are also known as Robertson bits.

Bits have a different size at each end.

An exterior stop collar prevents fasteners from being driven too deep. Use with soft materials such as drywall, wood, and fiberboard.

Bits have a different size at each end. An opening at the tips accommodates the pin in the recess of tamper-resistant Torx screws. These are also known as pin-in-Torx bits.

These bits have an offset cross shape. They’re also known as ACR® bits.

The toughest bits available, these withstand the shock and twisting force of impact drivers.

These bits provide a secure grip on the Phillips/slotted combination-drive screws in electrical equipment.

Turn two drive styles with one reversible bit. Remove and replace to change the tip.

These are also known as known as butterfly and Type G bits.

While screws with a square/Phillips combination drive can be turned with either a square or Phillips bit, these make the best contact so you can apply high torque without slipping and stripping the recess. They are also known as Quadrex bits.

A three-winged tip fits triangular slotted screw recesses.

These bits are shaped like a 12-pointed star. They're also known as XZN bits.

These are also known as TP3® bits.

An opening at the tip accommodates the pin in the recess of tamper-resistant Phillips screws. These are also known as pin-in-head Phillips bits.

Also known as Polydrive bits.

A magnet or retaining ring holds the nut in place.

The toughest bits available, these withstand the shock and twisting force of impact drivers. A magnet holds the nut in place.

Assortments contain bits with multiple drive styles.

Less likely to crack or shatter under high torque than standard bits, these are often used with power tools to install machine screws.

A retaining ring grips inside the recess to hold screws in place. These bits have a ball end that allows angled entry to drive screws in hard-to-reach areas.

Ribs forged into the wings of these bits grip the screw recess to reduce stripping. They're also known as ACR® bits.

The slightly tapered tip wedges into the screw recess for a secure hold. These are also known as Torx-Align bits.

These bits are also known as nut setters.

An opening at the tip accommodates the pin in the recess of tamper-resistant Torx screws. These are also known as pin-in-Torx bits.

The six rounded points fit the star-shaped recess of Torx-Plus screws. These bits have a similar profile to Torx but are not recommended for use with standard Torx screws.

An opening at the tip accommodates the pin in the recess of tamper-resistant hex screws. These are also known as pin-in-hex or pin-in-socket bits.

Designed for the fasteners used in electronics assembly, the tip of these bits has slightly sharper corners than Phillips style.

Grip the indentations on the head of tri-groove fasteners.

Use hex-shank bits (also known as insert bits) in powered tools.

Keep bits from slipping. Insert a bit into the adapter, place a screw on the end of the bit, and slide the adapter sleeve over the screw. The sleeve retracts as the screw is driven. These adapters hold hex-shank bits (also known as insert bits) in powered tools.

Bend these adapters up to 90° to access hard-to-reach fasteners. Use them to hold hex-shank bits (also known as insert bits) in powered tools.

Lock your bit into the adapter to prevent accidental disengagement. These adapters attach to square-drive tools.

These adapters are designed to withstand the high torque of impact drivers. They hold hex-shank bits (also known as insert bits).

Designed to withstand high torque and force, these adapters fit the square drive on impact wrenches. Use with hex-shank bits (also known as insert bits).

Keep these caddies in your tool drawer or take them with you.

Store a variety of sizes and styles of bits and adapters in one compact tray.

Bits are held in place with a retaining ring or set screw rather than a magnet, so the tool won't attract loose metal parts and shavings.

Lock the bit into the chuck to prevent accidental disengagement.

The bit holder ratchets so you can drive fasteners when there's little space to move the handle. A magnet or retaining ring secures the bit in the holder.

Drive screws four times faster than ratcheting alone. Grip the speed housing at the base of the shaft with one hand while turning the handle with the other. A magnet at the end of the shaft holds bits in place.

An insulated handle and shaft protect against shock from accidental contact with live electrical circuits. These tools are tested to 1,000 volts to meet EN 60900 and IEC 60900.

The ball-end tip allows angled entry to turn screws in hard-to-reach areas. These tools are a scaled-down version of standard changeable-shaft screwdrivers, They're shorter, slimmer, and easy to take with you. Remove and replace the shaft to change the tip size.

An insulated handle and shafts protect against shock from accidental contact with live electrical circuits. These tools are tested to 1,000 volts to meet IEC 60900.

When working in tight spaces, these short drivers fit where others can't. Bits have a different tip at each end and snap into the shaft, which is also a nutdriver.

Create your own tool by attaching these shafts to a handle, or use with socket wrenches and power tools. They have a ball end that allows angled entry to make good contact with the recess when a standard-tip shaft can’t.

Choose a handle based on torque and change shafts to use a different size or drive style. Factory-set screwdrivers ensure you reach the same torque every time.

Set includes a handle and six shafts. Remove and replace the shaft to use a different size or drive style.

Use these tools with 1/4" hex shank screwdriver bits. The rotating end cap on the handle allows you to apply constant pressure with your palm while turning the body of the driver with your fingertips.

Extra-long bits allow access to hard-to-reach fasteners.

The ball end allows angled entry when you don't have exact alignment between the socket bit and fastener.

Extra-long bits allow access to hard-to-reach fasteners.

These sockets are also known as pin-in-Torx bits.

Use sockets with tools that accept hex shanks, such as impact drivers and power drills.

Turn sockets with a bit screwdriver.

Convert from one square drive size to another.

These adapters are insulated to protect against accidental contact with live electrical circuits. They are tested to 1,000 volts to meet IEC 60900.

Pivot the head to access fasteners from an angle.

Set a desired torque within the range.

The square drive has a rounded shape that allows the extension to pivot inside the socket opening and turn it from an angle.

Change a standard wrench handle into a ratcheting wrench.

Lock your socket into the extension to prevent accidental disengagement.

A magnet holds the socket, making changes quicker.

Attach to your socket for a longer reach.

Extra-long bits allow access to hard-to-reach fasteners.

Extra-long bits allow access to hard-to-reach fasteners.

These sockets are also known as pin-in-hex or pin-in-socket bits.

Convert from one square drive size to another.

Attach to your socket for a longer reach.