The low-profile head on these pins holds them in place on one side.

Also known as universal clevis pins, these pins have holes on 1/4" centers so you can change the length by moving the cotter pin.

The bend makes these pins easy to insert and pull out.

Easier to install and remove than standard clevis pins, these pins have a ring-grip handle.

A swivel handle makes these pins easy to install and remove, while the toggle locks them in place. Flip the toggle to release the pin.

These one-piece fasteners lock in place with a toggle. Flip the toggle to release the pin.

Install or remove these pins from either side. Slide a retaining ring into the groove for a secure hold that takes up less space than a cotter pin.

For a more secure hold than standard quick-release pins, these pins lock in place until you push the button to release the spring-loaded retaining balls.

For the tightest spaces, these narrow-grip pins have the smallest heads of any of our locking quick-release pins. They lock in place until you push the button to release the spring-loaded retaining balls.

A T-handle makes these pins easy to grip. A spring-loaded, nonlocking retaining ball pops out when the pin is pushed through a hole, and retracts when the pin is pulled out.

These 18-8 stainless steel anchors have good chemical resistance.

Drive these tools with a hammer until the thicker portion of the tool makes contact with the anchor, causing it to expand.

Install like a stud anchor—just thread the anchor, a nut, and a washer onto the end of a threaded rod, drive into a hole, and turn the nut to expand the base. Also known as rod anchors, they're often used with threaded rod to hang pipe and wiring.

Also known as double expansion anchors, these expand from both sides for full contact and a secure hold.

Often referred to as four-way expansion anchors, these expand in four directions to resist loosening from vibration.

Drive these tools with a hammer to expand anchors.

Also known as cane bolts, these latches have the added height that's needed to bridge large vertical gaps. Install them at the top or bottom of swinging doors and gates to hold them in an open or closed position.

The mounting screws on these latches are concealed to prevent tampering.

Bolts are spring-loaded to stay latched until you activate the pull.

A large handle makes gripping these latches easier than other lift-and-drop barrel slide-bolt latches.

The strike has angled ends so these latches can accept their bolt even when doors become misaligned.

These padlockable latches are reversible for right- and left-hand mounting.

A large handle makes gripping these latches easier than other lift-and-drop barrel padlockable slide-bolt latches.

These padlockable latches are often used on 2" and 3" track to keep garage and other sectional overhead doors closed.

Choose these locks if you need several locks that open with the same key.

These strikes fit most deadbolt-style locks.

Choose these locks if you need locks that each open with a different key.

Open multiple cabinet locks with their own keys, as well as with a master key.

Thicker bodies and longer bolts resist prying to provide more security than other deadbolt cabinet door locks.

Choose these locks to use your own compatible lock cylinder to match the keying of an existing system.

To provide more security than other master keyed deadbolt cabinet door locks, these locks have thicker bodies and longer bolts to resist prying.

Choose these locks if you need several locks that open with the same key.

Each of these cabinet locks opens with its own key.

To provide more security than other master keyed deadbolt cabinet door locks, these locks have thicker bodies and longer bolts to resist prying.

These drawer locks open with their own keys and with a master key.

Side, top, and bottom latching points secure large, heavy doors that are subject to strenuous use, such as those on trucks and large access doors.

Use these latches alone for single-point latching, or add latch kits for more holding power.

Choose these L-handle locks if you need several that open with the same key.

Choose these keyed alike locks when you need several that open with the same key.

In addition to being padlockable, these heavy duty latches come with two handles for access from the inside as well as the outside. They are often used on refrigerators and truck doors.

Tighten the screw on the strike plate to secure the bar and prevent accidental unlatching.

These latches are reversible for right- and left-hand mounting.

To prevent accidental unlatching due to vibration, there's a bushing in the eye.

Latch and lock doors and cabinets these swing-handle cam locks, and unlock them with a four-number combination code.

Choose these cylinders if you need cylinders that each open with a different key.

This lock has a latch bolt to secure doors in the closed position.

Safeguard sliding doors in wire and chain link partitions.

Lock sliding windows in a closed position, or slightly open for ventilation.

Choose these locks if you need locks that each open with a different key.

Hold bathroom doors closed by swinging these latches into a notch in the strike plate.