A large handle makes gripping these latches easier than other lift-and-drop barrel padlockable slide-bolt latches.

The mounting screws on these padlockable latches are concealed to prevent tampering.

These padlockable latches have the added width that's needed to bridge large horizontal gaps. They are often used on double-door gates to hold them in an open or closed position.

Slide the bolt and drop the knob into the notch to secure.

Push the bolt into the strike plate to secure doors, gates, and cabinets.

Also known as cane bolts, these latches have the added height that's needed to bridge large vertical gaps. Install them at the top or bottom of swinging doors and gates to hold them in an open or closed position.

The strike has angled ends so these latches can accept their bolt even when doors become misaligned.

Pull the chain-grip to unlatch hard-to-reach doors and panels.

Choose these locks if you need several locks that open with the same key.

To prevent accidental unlatching due to vibration, there's a bushing in the eye.

To prevent accidental unlatching due to vibration, there's a bushing in the eye.

Latches snap shut when you push the bar in the strike plate to prevent accidental unlatching. Press the button on the strike plate to release the bar.

Tighten the screw on the strike plate to secure the bar and prevent accidental unlatching.

Push to close and pull up on the latch arm to open these padlockable latches.

A hidden push-button release on the bottom of these latches retracts the latch bolt; this discourages unwanted entry but allows access to those who know it’s there.

Slide these latches into the strike plate to secure bathroom doors.

Designed to withstand vandalism better than other deadbolt locks for double doors, these mortise mount into a cutout in the doors.